ICTEA 2007
LIST OF ACCEPTED PAPERS
Paper
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
Authors
Saud Aldajah
Khoukhi Maatouk
B. Sachuthananthan
N.M. Sudharsan
K. Jeyachandran
M. H. AlHoushan
N. Chandra Shekhar
K. Narayana Rao
M. H. AlHoushan
K. Narayana Rao
Ismael Al-Hinti
Bilal Akash
Eiyad Abu-Nada
AbdulSalam Al-Sarkhi
Navin Fogla
K.Pitchandi
E.Natrajan
Behzad Rismanchi
Mohamad Hadi Akbari
Ali Akbar Golneshan
Maher A.R. Sadiq AlBaghdadi
Haroun A.K. Shahad
Al-Janabi
A. Mokhtari
M. Yaghoubi
P. Kanan
A. Vadiee
R. Hessami
K. Kadirgama
K.A. Abou-El-Hossein
B. Mohammad
H. Habeeb
Title
Thermal Residual Stress Development in Laser Glazed Carbon Steel
Stack Pressure and Airflow Modeling in Tall Residential Building during the Cold Period
The status of Experimental and Numerical Investigations on Homogeneous Charge Compression Ignition (HCCI) Engine - An
overview
Mathematical Analysis of Mufflers Noise Using CFD
Gas-Solid Flow Modelling in a 3-D Riser Section of a Circulating Fluidized-Bed
PERFORMANCE ANALYSIS OF AIR-STANDARD DIESEL CYCLE USING AN ALTERNATIVE IRREVERSIBLE HEAT
TRANSFER APPROACH
Thermodynamic Optimization of a Heat Pipe by Minimizing Entropy Generation
Performance Prediction of Proton Exchange Membrane Fuel Cell Using a 3D Model
Three-Dimensional, Multi-Phase Flow, Computational Fluid Dynamics Model for Analysis of Transport Phenomena and
Thermal Stresses in PEM Fuel Cells
Thermal and optical study of parabolic trough collectors of Shiraz solar power plant
Effect of Milling Parameters towards Temperature and Heat Distribution in End-Milling
1
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P031
P032
Hosni I. Abu-Mulaweh
Shahram Karami
Gholamali Atefi
Adel Mellit
Adel Mellit
Jung-Chang Wang
Sih-Li Chen
Z. AOUACHRIA
U. H. Ugwu
Lyes BENNAMOUN
Azeddine BELHAMRI
M. A. Helal
Development of Portable Air-Conditioning System Experimental Apparatus
Analytical solution to one-dimensional temperature field within solid cylinder under periodic boundary condition using Fourier
Sine series
ANN-based Wavelet Analysis for Prediction Electrical Signal from Photovoltaic Power Supply System
ANFIS-based Genetic Algorithm for Predicting the Optimal Sizing Coefficient of Photovoltaic Supply (PVS) Systems
Thermal Performance of Two-Phase Closed Thermosyphon Cooling System
M. Guen
A. Liazid
K. Mansouri
D. Sadaoui
A. Djerrada
Z. AOUACHRIA
M.C. A. Touabti
A. Smati
M. Guellal
M. Ahmadzadeh
M. Gazikhani
Gilbert Accary
Sofiane Meradji
Dominique Morvan
Dominique Fougère
Roslinda Nazar
Anuar Ishak
Ioan Pop
Sarayooth Vaivudh
Younès Benarioua
Aswin Kannan
E.Natarajan
Modelling of the face of flame of a diesel engine with direct injection
STUDY OF AERDYNAMICAL AND MECHANICAL BIHAVIOUR OF THE SAVONIUS ROTOR
DESIGN AND FABRICATION OF A THERMAL CONDUCTIVITY MEASURING EQUIPMENT
Study of coupled transfers in a porous media: application to deep bed drying
Physico-Mechanical Properties of Normal and Self-Compacting Concrete Loaded Columns Subjected To Fire
A NEW SOLUTION FOR THE PERIODIC GRAETZ PROBLEM
HEAT AND MASS TRANSFER ALONG OF A VERTICAL WALL BY NATURAL CONVECTION IN POROUS MEDIA
Counting Of Gas and Calorific Invoicing
By Dynamic Simulation
ENERGY AND EXERGY ANALYSIS OF IRREVERSIBILITIES IN COMPONENTS AND BOILER OF AN
EXPRIMENTAL POWER PLANT
Towards a numerical benchmark for 3D mixed-convection low Mach number flows in a rectangular channel heated from below
Magnetohydrodynamic (MHD) flow and heat transfer due to a stretching cylinder
Heat transfer of high thermal energy storage with heat exchanger for solar trough power plant
Annealing study of chromium films deposited by electrolytic method on cemented steel substrate
Adiabatic Flame Temperature and its influence on the Process of Cooking
2
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
Carmine GOLIA
Bernardo BUONOMO
Antonio VIVIANI
Basim O. Hasan
Qasim .J.M. Slaiman
Basim O. Hasan
Essam E. Khalil
Norihan M. Arifin
Ioan Pop
Ali Boukhari
Rachid Bessaϊh
V. Gadhamshetty
N. Nirmalakhandan
Negar Khoshnevis
Gargar
M.Reza Kamali
Roozbeh Khosrokhava
M. A. Hamdan
A. M. Al-Qaq
Antonio Viviani
Andrew Zuev
J. David Rathnaraj
T. Michael N. Kumar
A. M. Ben-Arous
A. A. Busedra
O.A. El-Samni
K. Ghali
Jamal .M. Hussein
Xuejun (James) Ren
Najim Abdl Ameer
Saad
Dana Sirbu
Marcel Sabin Popa
Monica Popa
A corrected Vortex Blob Method for 3D Thermal Buoyant Flows
Prediction of Mass Transfer Coefficient under Annular Two Phase Flow Conditions using Eddy Diffusivity Concept
The Effect of Temperature and Hydrodynamics on the Corrosion Rate under Turbulent Flow Conditions Using Electrochmical
Technique
Energy Efficient Air-Conditioned Buildings in Arab World: A Challenging Era
Stability of Marangoni Convection In a Composite Porous- Fluid With a Boundary Slab of Finite Conductivity
Magnetohydrodynamics Stability in Mixed Convection Flow in a Cylindrical Enclosure
Exergy Analysis of Air-Cooled Condenser Performance in Combined Cycle Power Plants
Modeling of Heat- and Fluid-Flow in a Fractured Block (Comparison between Variable Width Fracture and Constant Width
Fracture)
The prediction of heat transfer coefficient in circulating fluidized bed combustors.
Deformation and Rupture of a Horizontal Liquid Layer by Thermal and Solutal Marangoni Flows
STUDIES ON INCYLINDER FLOWS IN DI DIESEL ENGINE USING CFD
Mixed Convection in Horizontal Internally Finned Semicircular Ducts
On Three-Dimensionality of Turbulent Buoyant Channel Flow
Energy savings potential of a hybrid desiccant dehumidification air conditioning system in Beirut
Modeling and experimental investigation of the forming temperature influence on the composite sheet rubber pad forming
Characteristics of Lead Particles in Relation with Human Working Exposure
3
P049
P050
P051
P052
P053
P055
P056
P057
P058
P059
P060
061
P062
S. Ghasemloo
M. Mani
M. Malekzade Dirin
Abderrahmane HALIS
Khaled ZEHAR
Munther Issa Kandah
Jean-Luc Meunier
Ashraf Balabel
Abdelkarim Hegab
Abdelkarim Hegab
Ashraf Balabel
Aiman Eid AlRawajfeh
Rustom Mamlook
Rafat Al-Waked
Masud Behnia
Christopher Chin
Kong Ming
Kian Hin
Mohd Azree Idris
Zulkifli Ahmad
Ban Kean Nam
Veera G. Gude
Nirmala Khandan
Rabah GOMRI
Riad HAKIMI
Salem M. Benshebil
Abdulbaset M.
Alemam
N. Guerroudj
H. Kahalerras
Taoufik Mnasri
Rached Ben Younès
Maher Raddaoui
Salem Elouragini
Viscous Shock-Layer Solutions around Hypersonic Bodies for Low and High Altitude Flow
Study of magnetic field coils for plasma arc heaters
Production of Carbon Nanotubes on Differnent Monel Substrates
Numerical Modeling of the Interfacial Instability in Two-Phase Flow Considering Buoyancy and Capillary Phenomena
Effect of Ammonium Perchlorate Grain Sizes on the Combustion of Solid Rocket Propellant
Fuzzy Set Implementation for Controlling and Evaluation of Factors Affecting Melting, Crystallinity and Interaction in
Polymer Blends
Wet Cooling Towers, Power Plant Structures and Crosswinds - CFD analysis
Review on Fog Inlet Air Cooling System Application For Gas Turbine in High Humidity Environment
Desalination using low-grade thermal energy
Modeling of Double Effect Vapor Absorption Cooler System Based on the Second law of Thermodynamic
Predication of Optimum Operating Conditions Based on Experimental Data for Thermoplastic Products (High Density
Polyethylene) in Injection Moulding
Analysis of fluid flow and heat transfer in a channel with porous blocks of various shapes
Convective heat-transfer coefficient in a buried bitubular exchanger –Use of Green's functions theory–
4
P063
P064
P065
P066
P067
P068
P069
P070
P072
P073
P075
P076
P077
P078
C. Bougriou
R. Le Gall
J.C. Solecki
R. Bessaïh
M. S. Tandale
T. N. Khandekar
S.K. Mahla
L.M. Das
M.K.G. Babu
D. OMEIRI
D.E. DJAFRI
Z. Ouennoughi
S. Toum
Z. Djessas
A. Ferhat Hamida
B. Jayashankara
V. Ganesan
Clemens Pollerberg
Ahmed Hamza H. Ali
Christian Dötsch
M. H. Abderrazzaq
O. Aloquili
Q.Al Zou'bi
N.Gilani
M. SHARIATYNiassar
Khaled ZEHAR
Samir SAYAH
Shadia J. Ikhmayies
Riyad N. Ahmad-Bitar
Asad A. Salem
V. Jyothishkumar
V. Ganesan
Gerd Walter
Lars Lorenz
Friedherz Becker
Measurement of the Temperature Distribution on a Circular Fin by Infrared Thermography Technique: Influence of the Bundle
Geometry
Performance Evaluation of Low Cost Domestic Parabolic Solar Cooker
Effect of cooled EGR on performance and exhaust emission characteristics of biodiesel fueled engine
Transport Coefficients in Polyatomic Gases at High Enthalpy: Validation by Direct Simulation Monte Carlo
Extraction of solar cell device parameters using vertical optimization and genetic algorithm
Effect of Engine speed and Intake pressure on flow structure inside the cylinder of a DI Diesel Engine
Experimental Study on Performance of Solar Driven Steam Jet Ejector Chiller
Evaluating the Impact of Grid Connection on the Wind Turbine Performance for Hofa Farm Scheme in Jordan
A Comparative Survey of Indirect Evaporative Coolers for Desirable Indoor Air Condition
Optimal Power Flow with Environmental Constraint Using a Fast Successive Linear Programming Algorithm: Application to the
Algerian Power System.
Effect of the Substrate Temperature on the Electrical and Structural Properties of Spray-Deposited SnO2:F Thin Films
Analysis of Isothermal and Reacting Flow in an Aircraft Gas Turbine Combustor
Reacting flow Analysis inside an Aero-Engine Annular Combustor with Conjugate Heat Transfer
Convective Heat Transfer to Good Stacks by Superposed Flows
5
P080
P081
P082
P083
P085
P086
P087
P088
P089
P090
P091
P092
P093
A.R. Masri
S.S. Ibrahim
Marcel Popa
Glad Contiu
Mircea Precup
Krishna Shrivastava
A.M. Mahalle
S.M. Hundiwala
A. BOUTTOUT
R. BESSAIH
S. BENISSAAD
B. Mansouri
M. Shariaty-Niassar
H. Patel
F. Ein-Mozaffari
R. Dhib
F. Gharagheizi
M. Bagheri
M. Shariaty-Niasar
Ibrahim Abu-Alshaikh
Nabil Beithou
Xiao-Dong Hu
Dong-Ying Ju
Abdallah ZERROUG
M.M. El-Awad
K.N. Abdalla
S.A. Abdalla
R.S.Maurya
S.K.Das
T.Sundararajan
A. Ouadha
M. En-nacer
O. Imine
K. Bellil
M. R. Mokarem
Recent Progress in the Understanding of Premixed Flame Propagation Past Obstacles
Contributions along heat transfer in EDM
A systematic research on Performance Analysis and Characteristics of Solar Cooker with Honeycomb Structure.
The onset of hydrodynamic and thermal instability during the cooling of electronic component by natural convection
Energy Conservation through Better Fuel Economy in Vehicles by Using Detergent Additive Containing Nanoparticles
CFD Analysis of Thermal Styrene Polymerization
A Simple Quantitative Structure Property-Relationship Model for Prediction of Flash Point Temperature of Pure Organic
Compounds
A Common Formulation of Axisymmetric Thermal and Mechanical Stresses in Functionally graded Cylinders and Spheres
Stresses Analysis in Twin-roll Casting Process of Mg Alloy
POROUS MEDUIM THERMAL CONDUCTIVITY THEORY
A Study of Gas Turbine Power Augmentation by Water & Steam Injection
Simulation of Laminar Falling Film’s Hydrodynamic Developing Region under the Influence of Surface Tension
Modelling of Steam Turbine Cycles
6
P094
P095
P096
P097
P099
P100
P101
P102
P103
P104
P105
P106
P107
P108
Salah Larbi
Mohamed T. Attouchi
Massinissa Hamoudi
A. S. Al-Ghamdi
Khairul M. Alam
M. Yaghoubi
A. Mokhtari
R. Hesami
R.T. Naik
M.K.G. Babu
L.M. Das
R.T.Babu Naik
T. Anand Kumar
J. M. Mallikarjuna
V. Ganesan
Hussain Alrobaei
R. HARITI
A. BENBRIK
D. LEMONNIER
Nadir Yilmaz
A. Burl Donaldson
R. Edward Lucero
A. Burl Donaldson
Nadir Yilmaz
R. Edward Lucero
P. Thiyagarajan
V. Ganesan
E. Abu-Nada
M.I. Amayrah
A. Al-Salaymeh
M. Kilani
A.T. Al-Halhouli
M. S. Ashhab
A. Al-Ghandoor
I. Al-Hinti
B. Akash
A Sensitivity Study Approach on Heat Transfer in the Internal Combustion Engine
Effectiveness Evaluation of Air-to-Air Rotary Heat Exchanger
Utilizing Porous Matrix
Thermo-Economic Analysis of Shiraz Solar Thermal Power Plant
Emission characteristics of CNG-Hydrogen operated Spark Ignition Engine
Effect of Ignition timing on combustion in a stratified charge DISI engine
Performance and Effectiveness of Solar PV/T Systems
Study of the LNG Evaporation Phenomenon in the Aboveground Storage Tank
Diffusion Flame Oscillations: Measurements and Correlations
Heat Exchange between a Thermocouple and an Acoustically Forced Diffusion Flame
Effect of Vane Design on the Performance of a Uniflow Cyclone
Investigation of Entropy Generation over a Backward Facing Step under bleeding conditions
NUMERICAL PREDICTION OF A BI-DIRECTIONAL MICRO HOT WIRE ANEMOMETER USING THREE PARALLEL
WIRES
Thermal Photovoltaic Solar Integrated System Analysis Using Neural Networks
Potential Electrical Energy Saving Opportunities in the Jordanian Plastics Industry
7
P109
P110
P111
P112
P113
P114
P115
P116
P117
P119
P120
P121
P122
A. Herz
M.R. Malayeri
H. Müller-Steinhagen
Antonio Campo*
Sreedhar Manchu
Anisur Rahman
Reginald Eze
Sunil Kumar
Tariq Shamim
Azeddine Belhamri
Karima Rebahi
Ali Chikhi
Lyes Bennamoun
Ahmed Hamza H. Ali
M. G. Morsy
I. S. Taha
M. Hamza
Salah Abdallah
Riyad Abu-Malouh
M. H. Abderrazzaq
O. AlOquili
M.R. ARAB
E. SEMMA
B. PATEYRON
M. El GANAOUI
Kholoud Mashal
Mohammed Al-Qinna
Yahya Ali
Salman Al-Shobaki
Mousa Mohsen
A.M. Mahalle
Dr. B. N. Jajoo
Mohd. Yusof Othman
Baharudin Yatim
Kamaruzzaman Sopian
M. N. Abu-Bakar
Fouling of Roughened Stainless Steel Surfaces during Convective Heat Transfer to Aqueous Solutions
heat/fluid flow characteristics of binary gas mixtures formed with helium across parallel-plate channels
A Novel Optical Thermal Deformation Sensor Based on Whispering Gallery Mode Resonator
The Effect of Oxygen Storage Capacity on the Dynamic Characteristics of an Automotive Catalytic Converter
INFLUENCE OF THE SATURATION RATE ON THE HEAT TRANSFER IN BUILDING MATERIALS
Experimental Investigation of Comfort Sensation and Performance of Radiant Heating Panel Compared With Conventional Oil
Heater
Heating systems with PLC and frequency control
Evaluation and Assessment of Jordanian Wind Farm Upgrading
Determination of physical properties of porous materials by a Lattice Boltzmann approach
Spatial distribution of lead and zinc in urban soils and street dusts samples in Al-Hashimeyeh municipality: controlling factors
and environmental implications
Modeling and Forecasting of Electrical Power Demands for Capacity Planning
Advanced Heat Removal System with Porous Media for Electronic Devices
Studies of a Photovoltaic-Thermal Solar Drying System for Rural Applications
8
P123
P124
P125
P126
P128
P129
P130
P131
P132
P133
P134
P135
P136
Ramadas Narayanan
Maya Pundoor
Ahmed Hamza H. Ali
Ibrahim M. Ismail
Yahya Ali
Marina Mustafa
Shireen Al-Mashaqbah
Kholoud Mashal
Mousa Mohsen
Wendy Hardyono
Kurniawan
Shahrir Abdullah
Kamaruzzaman Sopian
Elsafty, A. F.
Ali, A. A.
Nasr, A. N.
Abdulrahim Ahmad
Al-Zahrani
Mohammed A. Daous
Hani Sait
Design of Heat Recovery System for a Split Air-conditioner
AYOUB ABUDAYYEH
Ahmad Zahran bin Md
Khudzari
Kahar Osman
Mohd Zamani Ngali
S.Murugan
M.C.Ramaswamy
G.Nagarajan
Mathieu Francoeur
Daniel R. Rousse
Daniel R. Rousse
U.S. Wankhede
Thermal comfort Induced by Trombe Walls
Effect of the Evaporator Airside Fouling on Performance of Unitary Air Conditioners and its Impact on Indoor Air Quality
Potential of Energy Savings in the Hotel Sector in Jordan
Combustion Analysis and its Modeling in a Compressed Natural Gas Direct Injection Engine
Study of Air Flow and Temperature Distribution in Ship’s Crew Cabins
Effect of Gas Superficial Velocity and Solid Concentration on the Gas Holdup and Gas Phase Heat and Mass Transfer
Coefficients in a Slurry Bubble Column
Analysis of Micro Heat Pipe with Rectangular grooves
Solution of Navier Stokes Equation using Splitting Method with Stretched Coordinate
Performance and emissions of a diesel engine running with tyre pyrolysis oil diesel blends at different injection pressures
Unsteady Radiative Transfer in Participating Media: a Frequency-Based Numerical Approach
A Brief Review of the History of Radiative Transfer
ANALYSIS OF FLUIDIZED BED GAS SOLID SUSPENSION
9
P137
Syed Muhammad
Nasrul Al Khaireed
Kahar Osman
Mohd Kamal Ariffin
Md Yusoff Senawi
Dynamic Modeling of Stratification for Chilled Water Storage Tank
P138
Elsafty A. F.
Fath H. E.
Abdel Azim A. A
Marcel Sabin Popa
Experimental Investigation of a Tube-Type Solar Desalting Unit
P139
P140
P141
P142
P144
P145
P146
P147
Thermal Behaviour as Part of Unitary Concept for Testing New Types of Machine Tools
A. Sabeur-Bendehina Effect of the hot surface geometry on laminar Natural Convection in Cubical Air Filled Enclosures
O. Imine
L. Adjlout
B. Imine
Yousef Haik
Sridhar Kanuri
Yousef Haik
Jason Hendrix
Mohammad Kilani
Paul Galambos
S. Bougoul
S. Zeroual
T. Boulard
A. Azil
Adel M. Abdel Dayem
and M. Fatoh
Jamaluddin Md.
Sheriff
Kahar Osman
Salahuddin Mohamed
H. Grissa, F. Askri
M. Ben Salah
S. Ben Nasrallah
Magnetic Separation System for the Removal of Red Blood Cells
Surface Micromachined Crescent Micropump
Simulation of the Airflow and Temperature Distribution in Heated Greenhouses
Multi-effect Humidification-dehumidification Solar Water Desalination System: A Comparative Experimental and Numerical
Study
Numerical Analysis On Performance of Spiral Coil Heat Exchanger
Radiative transfer in non homogeneous cylindrical media
10
P148
P150
Elsafty A. F
Fath H. E.
Amer A. M
Benny Paul
V. Ganesan
Mathematical Model Development for a New Solar Desalination System [SDS]
Effect of Spiral Manifold Configuration on Swirl and Emissions in a DI Diesel Engine: A CFD Study
11