PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Page 1/ 8 1. IDENTIFICATION OF THE MIXTURE AND OF THE COMPANY: 1.1. Product identifier: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL 1.2. Relevant identified uses of the mixture and uses advised against: coating for industrial applications Use advised against: N/A 1.3. Details of the supplier of the Safety Data Sheet: Company: BARVY A LAKY TELURIA, s.r.o., ID No.: 43420371 Address: Skrchov 1, 679 61 Letovice, Czech Republic Tel: +420 516 474 211 - available during working hours from 7.00 to 15.00 Fax: +420 516 474 257, Email: tel@teluria.cz, prodej@teluria.cz, Http: www.teluria.cz 1.4. Emergency Telephone Number: Poison Centre Na Bojišti 1, 128 08 Praha 2 Tel.: +420 224 919 293 or +420 224 915 402 - available 24h/day 2. HAZARD IDENTIFICATION: 2.1. Classification of mixture: The mixture is classified as dangerous within the meaning of Regulation (EC) No.1272/2008 and Directive No.67/548/EEC. a) Classification according to Regulation (EC) No.1272/2008 Flammable liquid: Flam. Liq. 3 Acute toxicity: Acute Tox. 4 Skin corrosion/irritation: Skin Irrit. 2 Dangerousness for aqueous environment: Aquatic chronic. 3 b) Classification according to Directive 67/548/EEC Flammable. Harmful. Irritating. The most serious adverse effects on human health upon application: Harmful by inhalation and in contact with skin. Irritating to skin. The most serious adverse effects on the environment upon application: harmful for aquatic organisms; may cause longlasting adverse effects in aqueous environment. Xn: R10, R20/21, R38, R52/53 The most serious adverse effects in terms of physical-chemical properties and effects on human health and environment: Flammable liquid and vapour Harmful if inhaled Harmful in contact with skin Causes skin irritation Harmful to aquatic life with long-lasting effects Note: See Section 16 for full text of R (Risk) phrases and H (Hazard) statement. 2.2. Label elements Signal word: warning Hazard pictograms: Standard hazard statements (H-Phrases) H226 Flammable liquid and vapour H312 Harmful in contact with skin H332 Harmful if inhaled H315 Causes skin irritation H412 Harmful to aquatic life with long lasting effects Prevention precautionary statements (P-Phrases) P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking. PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL P261 P273 P280 P312 P403+P235 Page 2/ 8 Avoid breathing aerosols. Avoid release to the environment Wear protective gloves/protective clothing/eye protection. Call a POISON CENTER or doctor/physician if you feel unwell. Store in a well-ventilated place. Keep cool. Hazardous components which must be listed on the label Xylene, mixture of isomers, C9 aromatic hydrocarbons, 2-methoxy-1- methylethyl-acetate, buthyl acetate 2.3. Other hazards: Neither the mixture nor its components are classified as PBT (Persistent, Bioaccumulative and Toxic) or vPvB (Very Persistent and Very Bioaccumulative) as of the date of publication of this safety data sheet. Substances are neither listed in Annex XIV of REACH nor on the REACH candidate list. Vapours may form explosive mixture with air. Vapours have intoxicating and narcotic effect if swallowed, inhaled and in contact with mucous membranes. 3. COMPOSITION / INFORMATION ON INGREDIENTS: 3.1. Composition: Xylene, mixture of isomers + ethylbenzene (maximum ethylbenzene content is 26%), C9 aromatic hydrocarbons, 2-methoxy-1- methylethyl-acetate, buthyl acetate Dispersion of pigments in a solution of synthetic resin in organic solvents with additives Note: Hazardous substance content is the same for all manufactured colour shades. 3.2 a) Classification of hazardous substances according to Regulation (EC) No. 1272/2008/ES (CLP Regulation) Hazardous substance Content in % EC-No. Index No. Reg. No. Classification, category Xylene (mixture of isomers + ethyl benzene) 30 - 48 215-535-7 601-022-00-9 01211955526733-XXXX Flam. Liq. 3 Acute Tox. 4 Skin Irrit. 2 C9 aromatic hydrocarbons *) 2-methoxy-1methylethylacetate 9 01211945585135-0004 918-668-5 01211947579129-XXXX 01Buthyl acetate 2.5 - 4 204-658-1 607-025-00-1 211948549329-XXXX •) Contains less than 0.1% benzene by weight (ES 200-753-7) **) For full text of H-phrases see Section 16 of the Safety Data Sheet. 0 – 9.5 203-603-9 607-195-00-7 Hphrases *) H226 H312 H332 H315 Aquatic Chronic 2 H411 Asp. Tox. 1 H304 Flam. Liq. 3 H226 STOT SE 3 H335 STOT SE 3 H336 EUH066 Signal word Hazard pictogram Warning GHS02 GHS07 Danger GHS02 GHS07 GHS08 GHS09 Flam. Liq. 3 H226 Warning GHS02 Flam. Liq. 3 STOT SE 3 H226 H336 EUH066 Warning GHS02 GHS07 3.2. b) Classification of hazardous substances according to Directive No. 67/548/EEC Hazardous substance Xylene (mixture of isomers + ethyl benzene) C9 aromatic hydrocarbons *) 2-methoxy-1methylethyl-acetate Content in % Reg. No. EC-No. CAS-No. 30 - 48 01-211955526733-XXXX 215-535-7 1330-20-7 9 01-211945585135-0004 918-668-5 0 – 9.5 01-211947579129-XXXX Symbols and Rphrases **) Concentration limits R 10 Xn R 20/21 Xi R 38 Xn R 65, R10 Xi R 37 R 66 ,R67 N R 51/53 R 20/21-38 c ≥ 20% R 20/21, 12,5% ≤ c < 20% C ≥ 10 % Note: H,P,4 203-603-9 108-65-6 R 10 2.5 - 4 01-2119485493- 204-658-1 Buthyl acetate 29-XXXX •) Contains less than 0.1% benzene by weight (ES 200-753-7) 123-86-4 R 10 R 66, R67 C ≥ 20 % C ≥ 15 % C ≥ 25 % c ≥ 15% PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Page 3/ 8 **) Note: For full text of R-phrases see Section 16 of the Safety Data Sheet. 4. FIRST AID MEASURES: 4.1. Description of first aid measures: General: in all cases of doubt, or when symptoms persist, and upon accidental ingestion or eye contact, contact a physician and give him/her information from this safety data sheet. After inhalation: remove to fresh air, keep person at rest, and prevent hypothermia (overcooling). After skin contact: remove contaminated clothing and wash skin thoroughly with soap and plenty of water. After ingestion: flush mouth with water and drink at least half litre of water, do not induce vomiting After eye contact: irrigate copiously with clean water for 10 - 15 minutes, holding the eyelids wide open at all time 4.2. Most important symptoms and effects, both acute and delayed: It can be absorbed through skin. Degreases the skin and may cause skin dryness or cracking. It may cause dermatitis. Vapours have intoxicating and narcotic effects. Inhalation may cause drowsiness and dizziness. It affects the central nervous system. It can cause drowsiness, loss of coordination and distorted perception. Short-term exposure: symptoms of drunkenness, headaches, drowsiness, dizziness, nausea, vomiting, may lead to unconsciousness. Ingestion can cause burning pain in the mouth, throat, gullet and stomach. If breathed into the lungs during ingestion or vomiting, it can be quickly absorbed, thus causing injury to other systems. 4.3. Indication of any immediate medical attention and special treatment needed: Not specified; no immediate medical attention is necessary. 5. FIRE FIGHTING MEASURES: 5.1. Appropriate extinguishing media: dry chemical powder, carbon dioxide (CO2), foam (light, medium, and heavy). Inappropriate extinguishing media: water. 5.2. Special hazards arising from the mixture: toxic products and radiant heat may develop during fire. 5.3. Advice for fire fighters: protective clothing against radiant heat, breathing apparatuses. Cool closed containers exposed to fire with water. Avoid leakage of spent extinguishing media into water sources; prevent it from reaching the sewer system. 6. ACCIDENTAL RELEASE MEASURES: 6.1. Personal precautions, protective equipment and emergency procedures: avoid breathing vapours and skin and eye contact. Use proper protective clothes and gloves, as well as protective goggles, face shield and proper respiratory protection equipment, if necessary. Arrange inflow of fresh air in closed rooms. Eliminate all possible sources of ignition. No smoking or open flames. 6.2. Environmental precautions: avoid release to the environment; don’t let the leakage reach sewage system – danger of explosion. 6.3. Methods and materials for containment and cleaning up: collect mechanically, with residues to be absorbed with suitable absorbents /vermiculite, sand, earth, sawdust/ and place in proper container for disposal. Clean up the contaminated land. 6.4. Reference to other sections: see Sections 8 and 13 7. HANDLING AND STORAGE: 7.1. Precautions for safe handling: Avoid breathing vapours and skin and eye contact. Use proper protective clothes and gloves, as well as protective goggles and face shield. Vapours of volatile fractions form an explosive mixture with air. Use only in well-ventilated areas with ensured inflow of fresh air. Observe all fire safety measures (no smoking or open flames, eliminate all possible sources of ignition). Do not eat, drink or smoke while working. Caution: Do not wear contact lenses while working with preparations containing organic solvents. 7.2. Conditions for safe storage, including any incompatibilities: Store in closed containers, in ventilated areas at 5 – 25°C according to ČSN 65 0201 standard. The storage area must be equipped with first aid equipment and drinking water supply Keep away from food, drinks, animal feedstuffs and ignition sources (open flames, sparks, and hot surfaces). 7.3. Specific end uses: not specified 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION: 8.1. Control parameters: The product contains substances having following permissible occupational exposure limits (OELs) and maximum permissible concentrations (MPCs) in working environment (Government Regulation No. 361/2007 Coll.) CAS-No. 108-65-6 Substance OEL [mg.m-3] MPC [mg.m-3] 2-methoxy-1- methylethyl270 550 acetate 1330-20-7 Xylene 200 400 100-41.4 Ethylbenzene 200 500 C9 aromatic hydrocarbons 200 1000 123-86-4 Buthyl acetate 950 1200 Note: D: the substance rapidly penetrates or strongly irritates the skin upon exposure. Limit values of indices from biological exposure tests in urine (Decree No. 432/2003) Note D D D PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Substance Xylenes Indicator methylhippuric acids Ethylbenzene Limit values 1400 mg/g creatinine 820 µmol/mmol creatinine 1500 mg/g creatinine 1100 µmol/mmol creatinine Page 4/ 8 Time of sample collection at the end of workday at the end of workday DNEL and PNEC values taken from the material safety data sheets: Note: The Derived No Effect Level (DNEL) is an estimated safe level of exposure that is derived from toxicity data in accord with specific guidance within the European REACH regulation. The DNEL may differ from an Occupational Exposure Limit (OEL) for the same chemical. OELs may be recommended by an individual company, a governmental regulatory body or an expert organization, such as the Scientific Committee for Occupational Exposure Limits (SCOEL) or the American Conference of Governmental Industrial Hygienists (ACGIH). OELs are considered to be safe exposure levels for a typical worker in an occupational setting for an 8-hour work shift, 40 hour work week, as a time weighted average (TWA) or a 15 minute short-term exposure limit (STEL). While also considered to be protective of health, OELs are derived by a process different from that of REACH. 1) C9 aromatic hydrocarbons The Derived No-Effect Level (DNEL) Worker Substance C9 aromatic hydrocarbons Consumer Substance C9 aromatic hydrocarbons Dermal 25 mg/kg body weight per day DNEL, Chronic Exposure, Systemic Effects Dermal 11 mg/kg body weight per day DNEL, Chronic Exposure, Systemic Effects Inhalation 150 mg/m3 DNEL, Chronic Exposure, Systemic Effects Inhalation 32 mg/m3 DNEL, Chronic Exposure, Systemic Effects Oral 11 mg/kg body weight per day DNEL, Chronic Exposure, Systemic Effects 2) 2-methoxy-1- methylethyl-acetate The Derived No-Effect Level (DNEL) Workers Possible health effects Acute – systemic effects Acute – systemic effects Acute – systemic effects Acute – local effects Acute – local effects Long-lasting - systemic effects Long-lasting - systemic effects Long-lasting - systemic effects Long-lasting - local effects Long-lasting - local effects Possible ways of exposure contact with skin inhalation ingestion contact with skin inhalation contact with skin inhalation ingestion contact with skin inhalation Value unavailable unavailable unavailable unavailable unavailable 54.8mg/kg body weight per day 33mg/m3 1.67mg/kg body weight per day unavailable unavailable Consumers Possible health effects Acute – systemic effects Acute – systemic effects Acute – local effects Acute – local effects Long-lasting - systemic effects Long-lasting - systemic effects Long-lasting - local effects Long-lasting - local effects Possible ways of exposure contact with skin inhalation contact with skin inhalation contact with skin inhalation contact with skin inhalation Value unavailable unavailable unavailable unavailable 153.5mg/kg body weight per day 275mg/m3 unavailable unavailable Predicted No-Effect Concentration (PNEC) Environmental compartment Fresh water Marine water Intermittent release Value 0.635 mg/l 0.0635 mg/l 6.35 mg/l PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Sewage treatment plant Fresh water sediment Marine sediment Soil Page 5/ 8 100 mg/l 3.29 mg/kg d.w. 0.329 mg/kg d.w. 0.29 mg/kg d.w. 8.2. Exposure controls: General safety and hygiene measures: Never eat, drink or smoke while working. Wash hands with warm, soapy water before breaks and at the end of the workday; apply regeneration cream Effective general ventilation and local exhaust ventilation. 8.2.1. Personal protection, including personal protection equipment: Eye and face protection: Organic solvent resistant closed safety glasses or face shield. Skin protection: Anti-static work clothing. Hand protection: Organic solvent resistant gloves. Respiratory protection: If exposed to concentrations above OEL, half-mask respirator with organic aerosol filter is necessary. 8.2.2. Environmental controls Observe safe handling and storage measures. Do not discharge into sewage system, water flows or soil. 9. PHYSICAL AND CHEMICAL PROPERTIES: 9.1. 9.1. Information on basic physical and chemical properties: Appearance and physical state: liquid Colour: according to the shade Odour: typical aromatic Odour threshold: no data available pH (20°C): no data available Freezing point (°C): no data available Boiling point/boiling range (°C): xylenes: 136-143 C9 aromatic hydrocarbons: 140-200 buthyl acetate: 124 – 126.5 2-methoxy-1- methylethyl-acetate: 145.8 Flash point (°C): ca 30 (mixture) xylenes: 24-29 C9 aromatic hydrocarbons > 35 buthyl acetate: 23 - 25 2-methoxy-1- methylethyl-acetate: 45.5 Evaporation rate: not specified for coating compositions Flammability: flammable liquid Self-ignition temperature (°C): xylenes: 494, C9 aromatic hydrocarbons > 400 buthyl acetate: 370 2-methoxy-1- methylethyl-acetate: 333 Vapour pressure: no data available Vapour density: no data available Explosive properties: Explosive limits: xylenes: upper limit (% b.v.): 6-8 C9 aromatic hydrocarbons: upper limit (% b.v.): 7 buthyl acetate: upper limit (% b.v.): 7.6 2-methoxy-1- methylethyl-acetate: upper limit (% b.v.): 7 Density (g/cm3): 1.05 – 1.25 Solubility in water: insoluble Oxidizing properties: shows no oxidizing properties Partition coefficient n-octanol/water: no data available Viscosity kinematic (40°C) (mm2/s) > 20.5 lower limit (% b.v.): 1-2 lower limit (% b.v.): 0.7 lower limit (% b.v.): 1.2 lower limit (% b.v.): 1.5 9.2. Other information: Hazard class: II 10. STABILITY AND REACTIVITY: 10.1. Reactivity: No dangerous reactions are known under conditions of normal use. 10.2. Chemical stability: The product is volatile and evaporates even at normal temperature and pressure. It is stable when stored and handled under normal conditions of surrounding environment. 10.3. Possibility of hazardous reactions: Vapours of volatile fractions form an explosive mixture with air. 10.4. Conditions to avoid: Intensive heating, concentrations within the explosive limits. 10.5. Incompatible materials: Strong acids, strong oxidising agents, various plastics, rubber 10.6. Hazardous decomposition products: burning may produce toxic products and fumes 11. TOXICOLOGICAL INFORMATION: 11.1.1. Information on toxicological effects: Acute toxicity: Harmful by inhalation and in contact with skin PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Page 6/ 8 Substance CAS- No. LD50 oral, rat LC50 inhalation, rat LD50 dermal, rabbit Xylene 2-methoxy-1- methyl ethyl-acetate C9 aromatic hydrocarbons Buthyl acetate 1330-20-7 108-65-6 4300 mg/kg > 5000 mg/kg 6350 mg/m3/4h >4500ppm/6h 4500 mg/kg > 5000 mg/kg 123-86-4 3592 mg/kg 10768 mg/kg 6193 mg/m3/4h 2000 mg/l/4h 3160 mg/kg 5000 mg/kg Note: Data were taken from the raw material suppliers´ safety data sheets, Industrial Toxicology (by Marhold). Skin corrosion/irritation: Irritates skin. Serious eye damage/irritation: Available data do not meet the criteria for classification. Respiratory/skin sensitisation: Available data do not meet the criteria for classification Carcinogenicity: Available data do not meet the criteria for classification. Mutagenicity: Available data do not meet the criteria for classification. Reproductive toxicity: Available data do not meet the criteria for classification. Specific target organ toxicity/single exposure: Available data do not meet the criteria for classification. Specific target organ toxicity/repeated exposure: Available data do not meet the criteria for classification. Aspiration: Available data do not meet the criteria for classification. 12. ECOLOGICAL INFORMATION: 12.1. Ecotoxicity: The product is classified as harmful for aquatic life with long-lasting effects, Aquatic chronic. 3 Data are given for individual substances: Substance CAS-No. LC50 fish/96 h EC50 daphnia/48 h IC50 algae/72 h Xylene 2-methoxy-1- methyl ethyl-acetate C9 aromatic hydrocarbons Buthyl acetate 1330-20-7 108-65-6 86 mg/l 100-180 mg/l 165 mg/l 408-500 mg/l 160 mg/l 123-86-4 9,2 mg/l 62 mg/l 3,2 mg/l 73 mg/l 2,9 mg/l 675 mg/l 12.2. Persistence and degradability: xylene, 2-methoxy-1- methylethyl-acetate, C9 aromatic hydrocarbons, buthyl acetate – substances are easily biodegradable. 12.3. Bio-accumulative potential: xylene (BCF: 6 - 23), 2-methoxy-1- methylethyl-acetate (BCF: less than 100), buthyl acetate: bio-accumulative potential of substances is low. C9 aromatic hydrocarbons: bio-accumulative potential is not determined. 12.4. Mobility in soil: The product is a low-viscosity liquid. In case of leakage into environment, it may be dispersed over large distances and penetrate into underground water. 12.5 Results of PBT and vPvB assessments: The product does not meet criteria for classification into PBT or vPvB substances. 12.6 Other adverse effects: Not available 13. DISPOSAL CONSIDERATIONS: Product residues, contaminated materials and empty disposable contaminated packaging must be disposed of by waste producer according to Act No. 185/2001 Coll. on waste and on amendment to some other acts, and Act No. 477/2001 Coll. on packaging and on amendment to some other acts. When properly emptied, deliver the used package to a package waste collection centre. Packages retaining product residues should be delivered to a hazardous waste disposal place designed by a municipality or handed over to a person authorised to dispose of hazardous waste. 13.1. Regulatory disposal information: Waste code: Waste paint and varnish containing organic solvents or other hazardous substances: 08 01 11 Packaging containing residues of or contaminated by hazardous substances: 15 01 10 The component rendering waste hazardous according to Annex 5 to Act No.185/2001 Coll.: C 41 organic solvents, with the exception of halogenated solvents. 14. TRANSPORT INFORMATION: 14.1 Special precautions – Guidance in case of accident is necessary 14.2 Hazardous classification of dangerous goods for individual types of transport Land transport ADR/RID: Hazard Identification No: 30 Transport hazard class: 3 Proper shipping name: PAINT UN No.: 1263 Label: 3 Packing Group: III Classification-Code: Inland Waterways AND/ADNR: F1 PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Hazard Identification No: UN No.: Air transport ICAO/IATA Hazard Identification No: UN No.: Page 7/ 8 30 1263 Transport hazard class: 3 Label: 3 Proper shipping name: PAINT Packing Group: III Classification-Code: F1 30 1263 Transport hazard class: 3 Page: Proper shipping name: Packing Group: III PAX: 310 PAINT 309 CAO: 14.3. Environmental hazards: none Supplementary label: 14.4. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code: not classified 15. REGULATORY INFORMATION: 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture Regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, as well as related implementing regulations Regulation (EC) No 1272/2008 of the European Parliament and of the Council on classification, labelling and packaging of substances and mixtures, as amended Act No. 350/2011 Coll. on chemical substances and chemical mixtures, as amended , Decree No. 402/2011 Coll. on evaluation of dangerous properties of chemical substances and chemical mixtures and packaging and labelling of dangerous chemical mixtures ▪ Act No.185/2001 Coll. on Waste and on amendment to some other acts, Decree No. 381/2001 Coll., the Catalogue of Waste ▪ Decree No. 383/2001 Coll. on details of waste treatment ▪ Act No. 258/2000 Coll. on Public Health Protection ▪ Order of the Government No. 178/2001 Coll. laying down the conditions for employee health protection at work ▪ Decree No. 432/2003 Coll. laying down the conditions for assigning categories to individual jobs, limit values of indices from biological exposure tests, and the particulars of the reports on work with asbestos and biological agents ▪ Act No. 86/2002 Coll., the Clean Air Act ▪ Decree No. 337/2010 Coll., on emission limits and other conditions for operation of other stationary sources of air pollution that emit and utilize volatile organic compounds and on handling of products containing volatile organic compounds ▪ Act No. 477/2001 Coll. on packages as amended ▪ Decree No. 115/2002 Coll. laying down the details of package handling. ▪ Act No.59/2006 Coll., on the Prevention of Major Industrial Accidents. ▪ Common Position (EC) No.33/2005 Coll. (ADR), Common Position (EC) No. 34/2005 Coll. (RID) 15.2. Chemical safety assessment: A Chemical Safety Assessment has been carried out for the substances 2-methoxy-1- methylethyl-acetate and C9 aromatic hydrocarbons. No report on chemical safety for xylene and buthyl acetate was provided by the supplier until the publication of this Safety Data Sheet. 16. OTHER INFORMATION: 16. a) Changes made in the Safety Data Sheet within the revision process: Version 1 Date 30/5/2012 Changes 16. b) Key or legend to abbreviations: Flammable liquid, category 3: Flam. Liq. 3 Acute toxicity, category 4: Acute Tox. 4 Skin corrosion/irritation, category 2: Skin Irrit. 2 Specific target organ toxicity - single exposure, category 3: STOT SE 3 Aquatic environmental hazard, category 2,3: Aquatic chronic.2,3 Aspiration hazard, category 1: Asp. Tox.1 Serious eye damage/irritation, category 1: Eye dam.1 Carcinogenicity category 2: Carc. 2 Respiratory/skin sensitisation, category 1: Skin Sens.1 EINECS European Inventory of Existing Commercial Chemical Substances ELINCS European list of notified chemical substances 16. c) Most important information sources used to compile this Safety Data Sheet: PRODUCT SAFETY DATA SHEET in accordance with Regulation 1907/2006/EC Date of issue: 30/5/2012 Revised: Revision No.: Name of product: TELPUR T 340 TWO-COMPONENT POLYURETHANE GLOSSY ENAMEL Page 8/ 8 Raw material suppliers´ safety data sheets, database of ECB ESIS : EINECS/ELINCS (European Chemicals Bureau – European Chemical Substances Information System) ChemDat Merck, Fluka, Fire and safety technical characteristic values of hazardous substances 16. d) List and full text of applied risk phrases, standard hazard statements and prevention precautionary statements: R10 R 20/21 R 37 R 38 R 51/53 R 52/53¨ R 65 R 66 R 67 Flammable Harmful by inhalation and in contact with skin Irritating to respiratory system Irritating to skin Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment Harmful: may cause lung damage if swallowed Repeated exposure may cause skin dryness or cracking Vapours may cause drowsiness and dizziness H226 H304 H312 H315 H332 H335 H336 H411 H412 EUH066 Flammable liquid and vapour May be fatal if swallowed and enters airways Harmful in contact with skin Causes skin irritation. Harmful if inhaled May cause respiratory irritation May cause drowsiness or dizziness Toxic to aquatic life with long lasting effects Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. P210 P261 P273 P280 P312 P403+P235 Keep away from heat/sparks/open flames/hot surfaces – No smoking. Avoid breathing aerosols. Avoid release to the environment Wear protective gloves/protective clothing/eye protection/face protection Call a POISON CENTER or doctor/physician if you feel unwell Store in a well-ventilated place. Keep cool. 16. e) Instructions for training: Any legal person and/or individual entrepreneur handling this chemical product must become familiar with data contained in this product safety data sheet and receive training on safety rules. 16. f) Other information: Values for setting emission limits: The product is only intended for use in plants or for activities regulated under Act No. 86/2002 Coll. on air protection and Decree No. 337/2010 Coll., as amended. Density of hardened mixture in g/cm3 Non-volatile matter content– dry matter /ONL/ of two-component coating composition in % b.v. Organic solvent content /VOC/ in kg per kg hardened mixture Total organic carbon /TOC/ content in kg per kg hardened mixture 1.05 – 1.22 Min 40 0.39 – 0.46 0.33 – 0.40 This Safety Data Sheet was compiled in accordance with Regulation (EC) No. 1907/2006 of the European Parliament and of the Council, as amended. It contains all necessary data concerning job safety and health protection and environmental protection. The above-mentioned data correspond to our present state of knowledge and experience and comply with applicable legal regulations. They cannot be considered as a guarantee of suitability and usability of a product for a specific application 16. g. Contact point for providing technical information: Tel: +420 516 474 211, Fax: +420 516 474 257, Email: tel@teluria.cz, prodej@teluria.cz Http: www.teluria.cz