IDT Initial Settings 12 KB

advertisement
Initial Settings:
Go to Control Panel, Sound, “Speaker + Dual Headphones”
Should have green check mark and say: Working
Select: Playback, Recording or Sounds
Double-click for settings, and choose all settings (including “Room Enhancements”)
To Boost or Lower the Volume:
1. Right click on "speaker/volume icon" on the right lower corner of Desktop.
2. Click "Playback devices"
3. Under Playback Tab, click "Speakers + Dual Headphones, and then click "Properties"
4.Under Enhancements Tab, scroll down + check on "Loudness Equalization", then click Apply + OK
Go to Control Panel + open IDT Audio, Playback
Click on: Settings, and choose your setting options
Then click on: Setup and choose your setting options
To Balance Speakers:
Go to IDT Audio, select Setup
Laptop speakers: Sound, “Speaker + Dual Headphones”
Should have green check mark and say: Working
Select: Playback, Recording or Sounds
Double-click for settings
Go to Control Panel + open IDT Audio, Playback
Click on: Settings, and choose all settings
Then click on: Setup and choose all settings
Headphone settings:
Go to Control Panel + open IDT Audio
“Independent Dual Headphones”
For Playback
Settings
Check: set as default
Bass Management – have set at the maximum
Optimize Bass Routing – have it selected (button turns green)
Independent Dual Headphones is the middle one
Sound Mixing for Headphones
Go to Control Panel + open Sound
Select Independent Dual Headphones + double-click on it
To adjust base: Go to Enhancements + check Bass Boost + Low Frequency Protection, + then go down to Settings and try different settings.
Same for Headphone Virtualization and Loudness Equalization
Go to Control Panel + open IDT Audio, Playback
In left-hand column, select: Equalization, and choose settings
Download