Instrument Transducers Sapfir-22M, Sapfir-22MT, Sapfir-22-Ex-M Purpose Transducers of Sapfir series are designed for continuous conversion of all kinds of liquid and gas pressure into unified current output signal in controlling systems including explosive manufacture. Design version corresponds to explosion protection. The transducers can be used in devices designed for conversion of liquid level values, liquid or gas flow rate. Design version IP 65 corresponds to ГОСТ 14254. Other climatic design versions are made on request and correspond to ГОСТ 15150. The transducers are proof against the relative humidity of ambient air: 98% at 35°C and lower temperatures without condensation of moisture for all climatic versions, except T; 100% at 35°C and lower temperatures without condensation of moisture for the climatic version T. Main Technical Characteristics Each converter may be adjusted to any upper measurement limit that is preset for the chosen model. Lower measurement limit is zero. On customers request the transducers can be manufactured with units of pressure: kgf/m2, kgf/cm2, bar. Upper measurement limit Absolute pressure: Overpressure: Rarefaction: Pressure difference: Pressure-rarefaction: 0.025 - 160 bar (0.360 - 2321.00 psi) 0.0016 - 1000 bar (0.023 - 14500.00 psi) 0.01 - 1 bar (0.145 - 14.50 psi) 0.01 - 160 bar (0.145 - 2321.00 psi) 0.0008 - 1 bar (0.0116 - 145 psi) rarefaction 0.0008 - 24 bar (0.0116 - 348.1 psi) overpressure Limits of allowable basic error expressed in per cent, must not exceed Transducers with LCD indicator: ± 0,15 and ± 0,25 Transducers with upper measurement limits or the sum of upper measurement limits: from 1 kPa (0.01 bar) to 100 MPa (1000 bar) ± 0,25 from 0,4 kPa(0.004 bar) to 100 MPa (1000 bar) ± 0,5 from 0,16 kPa (0.0016 bar) to 0,25 kPa (0.0025 bar) ±1 Limiting values of output signals and DC supply voltage depending on link connection and explosion protection. Output signal, mA Supply voltage, V Link connection 0 – 5; 5 – 0 4 – 20; 20 – 4 (36±0,72) 15 – 42 four-wires four-wires,two-wires Version of explosion protection н/в, ВН н/в, ВН 4 – 20; 20 – 4 24 two-wires Ex Power consumption of the transducers for the transducers with output signal 4 – 20 mA or 20 – 4 mA: for the transducers with output signal 0 – 5 mA or 5 – 0 mA: no more than 0,8 V·A no more than 0,5 V·A