335 TEC SPEC CYLINDER-BED SEWING MACHINE FOR INDUSTRY AND HANDICRAFT Quality and efficiency are the hallmarks of this cylinder-bed sewing machine. AREAS OF APPLICATION This cylinder-bed sewing machine can be used for: Leather accessories Leather wear Upholstery Shoes It is suitable for: Working on tubular or pre-attached articles Standard sewing work on leather ware, bags and leather craft articles Binding of shoes and leather ware with leather, imitation leather or textile Piping work on bags, suitcases and upholstery Details TECHNICAL INFORMATION Stitch type 301 (lockstitch) Max. sewing speed 2800/s.p.m. Max. stitch length 6 mm (N) Model B Clearance under the sewing foot max. 14 mm Top feed stroke 7 mm Clear work space 265 mm Clear work height 115 mm Cylinder bed dia 51 mm Cylinder bed circumf. approx. 165 mm Needle system 134-35 Needle thickness 80-100 Thread type synth. 40/3 Balance wheel eff. dia 80 mm Working air pressure 6 bar Net weight (head) approx. 32 kg Net weight (head in carton) approx. 54 kg SPECIAL FEATURES Excellent sewing quality with high performance and sewing reliability Precise and consistent stitch setting on all materials Very neat bindings, even inside and outside curves thanks to the moving binder tape is held close to thebinding edge Fewer bobbin changes when using G-version (large hook) Equipped with finger-guard, belt-and take-up lever guards as standard ADDITIONAL EQUIPMENT & WORK AIDS -900/52 Thread trimmer (electro-mechanically controlled) -910/98 Automatic presser-foot lifter (electro pneumatically activated) -913/52 Automatic needle positioner in connection with electronic motor for machines -925/03 Maintenance unit for pneumatically controlled work aids AVAILABLE SUBCLASSES -2/27 For leather craft work Small- size part set (smooth surfaced sewing parts) Edge guide mounted on the cylinder bed -6/01 For general seaming work with standard part set -17/01-650/03 For binding operations, 90 tape in-feed, attachment mounted on retractable bracket. MA 1245 / MA 1246 General Information Features & Additions Technical Data Downloads SINGLE- AND DOUBLE NEEDLE LOCKSTITCH FLAT BED SEWING MACHINE WITH UNISON FEED The incredible four- for closing- and fancy seams – for decorative- and rope stitching SPECIAL FEATURES High traction due to unison feet. Even feed motion without any ply-shift of individual layers. Large vertical rotary hook with 60% more bobbin thread capacity than other standard-sized hooks. Automatic hook lubrication. Efficient hook protection against thread jamming due to standard built-in overload coupling (M). Rugged and durable. The high top feed lift (7 mm) allows trouble-free sewing of thick materials and an easy sewing over cross seams. Easy to service. Easy loading and unloading – even of bulky material – due to a high fabric clearance of 14 mm. SUBCLASSES AND ADDITIONAL EQUIPMENT -900/56 Thread trimmer Back tacking system 911/97* -925/03 Air filter / pressure regulator -6/07 Special part set for seams with particularly bulky cross seams stitch length max 6 mm, available for machines with or without thre CN 900/56 -6/07 Same as -6/07 CN, but stitch length 8 mm CN8 -17/01650/03 Part set for binding, without binder (for machines without P) CN -40/01 Piping part set for piping size 5 mm, device for the manufacture and simultaneous insertion of piping between two plies of fabric, CN x on retractable carrier 5.0 TECHNICAL INFORMATION Stitch type 301 (lock stitch) Max. sewing speed 2800 s.p.m. Top feed lift 7 mm Fabric clearance max. 14 mm Needle System 134-35 Needle Size (Nm in 1/100 mm) 110-180 Balance Wheel 80 mm eff. dia Motor power 0.37 / 0.55 kW Clear workspace 270 mm x 115 mm Bedplate dimensions 518 mm x 177 mm Net weight of head approx. 46 kg Gross weight approx. 54 kg Carton box dimensions 77 x 62 x 38 cm The machine is equipped as standard with finger guard, belt- and take-up lever guards. Structural figures, weight and dimensions subject to alteration. Automatic Hook Standard Supply Program presser Four-motion- Thread trimmer drop-feed (P) -900/56 protection device (M) foot/lifter / backtacking system -911/97 * 1245-6/01 CLPMN 1245-6/01 CLPMN8 1245-6/01 CLMN8 1245-6/01-900/56 CLPMN 1245-6/01-900/56 CLPMN8 1245-6/01-900/56-911/97 CLPMN