MAX 10 FPGA

advertisement
Confidential Material
MAX 10 FPGAs - Overview
Tom Schulte
Low Cost Product Marketing
5/9/2014
Innovation Leader Across the Board
PLDs
Lowest Cost,
Lowest Power
FPGAs
FPGAs
Cost/Power Balance Mid-range FPGAs
SoC & Transceivers SoC & Transceivers
FPGAs
Optimized for
High Bandwidth
PowerSoCs
High-efficiency
Power Management
RESOURCES
Embedded Soft and
Hard Processors
Design
Software
Development
Kits
Intellectual
Property (IP)
 Industrial
 Computing
 Enterprise
2
Low Cost Families – Altera Continues Focus & Investment
More performance,
features, or density
Cyclone V
SoC
Next
Generation
Cyclone V
Cyclone IV
Cyclone III
Cyclone II
Cyclone®
MAX 10
MAX® II
2000
MAX V
2013
Future
In Design
Product Planning
3
MAX 10 FPGAs: Revolutionizing Non-Volatile Integration


4
FPGA Capabilities

Up to 50,000 Logic Elements

Analog Block with ADC

Internal SRAM

PLLs

DSP Blocks

External Memory Interface (e.g. DDR3)

Dual Image Configuration

Nios II Embedded Processor

LVDS, PCI, and 30+ other I/O Standards

Design Security

Sleep Mode
Non-volatile Features

Instant-On

User Flash Memory

Voltage Regulator

Internal Oscillator
MAX 10 FPGAs Simplify FPGA Systems
Traditional FPGA
MAX 10 FPGAs
Vsupply
Vsupply
LDO
LDO
LDO
3.3V
1.2V
2.5V
3.3V
Dual Image
Configuration
Device
Traditional
FPGA
3.3V I/O
Dual Image
Configuration Memory
(Up to 50k LE)
MAX 10 FPGA
3.3V I/O
(Up to 50k LE)
Analog
ADC
Standard
Configuration Time
5
Analog
Analog Block
Instant-On
Configuration
MAX 10 FPGAs Increase Capabilities of CPLD Systems
External Memory
Interface
Analog
Analog
User Flash
3.3V
I/O
(Nios code)
3.3V I/O
CPLD
MAX 10 FPGA
DSP
Single
Image
Single
Image
Dual
Image
CPLD
MAX 10 FPGAs
240 – 8,000
2,000 – 50,000
Single
Dual
DSP
No
Yes
DDR3 SDRAM
No
Yes
Analog Block w/ADC
No
Yes
Embedded Processor
No
Nios II
Logic Elements
Instant-On Images
6
Block
MAX 10 vs. Prior Family – Higher Single Chip Integration
Feature
MAX V CPLDs
MAX 10 FPGAs
180 nm
55 nm
2,000 LE’s
50,000 LE’s
Single Image
Dual Image, AES
User I/O
271
Up to 500
User Flash Memory
8 Kb
Up to 512 Kb
-
Embedded RAM, DSP,
ADC, PLL
No
Yes
Process Technology
User Logic (max.)
On-chip Configuration
On-chip hard IP blocks
Remote System Upgrade
Lowering System Cost &
Increasing Reliability
7
MAX 10 FPGA - Floorplan

DSP
Blocks
Main Architecture Modules
 Logic array
 On-chip RAM & FLASH
RAM Blocks
Analog
Blocks
 DSP blocks
Config.
Flash
 Up to two analog blocks
User
Flash
 Up to eight I/O banks
Control
Block
 Up to four PLL’s
 Oscillator & Clocks
 Soft IP functionality
 Nios® II 32-bit processor, Ethernet
MAC, PCIe MAC, Video IP Suite,
etc.
8
Logic Array External
Blocks
Memory
Interfaces
PLL’S
MAX 10 FPGA – Family Plan
Block
User
18x18
Internal
Memory Flash 1
PLLs
Mults
Config.
(Kb)
(Kb)
External
RAM
I/F
Device
LEs
10M02
2,000
108
96
16
1, 2
Single
-
Yes 2
10M04
4,000
189
128
19
1, 2
Dual
1, 1
Yes 2
10M08
8,000
378
256
24
1, 2
Dual
1, 1
Yes 2
10M16
16,000
549
256
45
1, 4
Dual
1, 1
Yes 3
10M25
25,000
756
256
61
1, 4
Dual
2, 1
Yes 3
10M40
40,000
1,260
512
125
1, 4
Dual
2, 1
Yes 3
10M50
50,000
1,638
512
144
1, 4
Dual
2, 1
Yes 3
Notes:
1. Additional User Flash may be available, depending on configuration options.
2. SDR SDRAM or SRAM only.
3. SDR SDRAM, SRAM, DDR3, DDR2, or LPDDR2.
4. ADC blocks available on die but may not be available in low pin count packages.
9
ADC 4,
TSD
Preliminary and subject to change without notice.
MAX 10 FPGA - Feature Set Options
Feature Set
C: Compact
F: Flash
A: Analog
Yes
Yes
Yes
Dual Image
w/Remote System Upgrade
-
Yes
Yes
Analog Features Block
-
-
Yes
Single Image
“C”
“F”
Three Feature Set Variants
To Order From
10
“A”
Package Plan & Available I/O (Dual Power Supply: 1.2V/2.5V)
Product
Line
10M02
10M04
10M08
10M16
10M25
10M40
10M50
“D”
“D”
“D”
“D”
“D”
“D”
“D”
81-WLCSP
36-WLCSP
2
3x3mm
4x4mm2
0.4mm Pitch 0.4mm Pitch
C (27)
C/F (56)
-
256-FBGA
17x17mm2
1.0mm Pitch
324-UBGA
15x15mm2
0.8mm Pitch
C/F/A (178)
C/F/A (178)
C/F/A (178)
C/F/A (178)
C/F/A (178)
C/F/A (178)
C (160)
C/F/A (246)
C/F/A (246)
C/F/A (246)
-
Note: Selected items = Pro-active automotive p/n rollout.
Other product line/package combinations available upon request & sufficient ROI.
484-FBGA
672-FBGA
2
23x23mm
27x27mm2
1.0mm Pitch 1.0mm Pitch
C/F/A (250)
C/F/A (320)
C/F/A (360)
C/F/A (360)
C/F/A (360)
C/F/A (380)
C/F/A (500)
C/F/A (500)
Preliminary and subject to change without notice
C: Compact
F: Flash
Bare
Die
WLCSP
xBGA
A: Analog
U = 0.8mm ball spacing
F = 1.0mm ball spacing
Wide Variety of Sizes & Available I/O
11
Package Plan & Available I/O (Single Power Supply: 3.3V)
Product
Line
10M02
10M04
10M08
10M16
10M25
10M40
10M50
“S”
“S”
“S”
“S”
“S”
“S”
“S”
144-EQFP
16x16 mm2
0.4 mm Pitch
C (101)
C/F/A (101)
C/F/A (101)
C/F/A (101)
C/F/A (101)
C/F/A (101)
C/F/A (101)
153-MBGA
8x8mm2
0.5mm(1)
C (112)
C/F/A (112)
C/F/A (112)
-
Notes:
1 – “Easy PCB” utilizes 0.8mm PCB design rules
2 - Items in blue = Pro-active automotive p/n’s.
Others available upon request & sufficient ROI.
169-UBGA
11x11mm2
0.8mm
C (130)
C/F/A (130)
C/F/A (130)
C/F/A (130)
-
Preliminary and subject to change without notice
C: Compact
F: Flash
A: Analog
Bare
Die
EQFP
xBGA
M = 0.5mm ball spacing
U = 0.8mm ball spacing
Single Supply Option for
Simplicity & Convenience
12
MAX 10 FPGA Ordering Information
Family
Optional
Suffix
10M: MAX 10 FPGA
ES
G = RoHS 6
P = Leaded
ßß = Special
processing
10M 16 x x u484 i 7 x ßß
Product
Line
02: 2K LE’s
04: 4K LE’s
08: 8K LE’s
16: 16K LE’s
25: 25K LE’s
40: 40K LE’s
50: 50K LE’s
Speed
Power
Supply
S: Single Voltage
D: Dual Voltage
Feature
Option
C: Compact features
F: Flash features
A: Analog features
Package Type
& Ball Count
V: Wafer level chip-scale
E: EQFP
M: MBGA
U: UBGA
F: FBGA
36, 81
144
153
169, 324
256, 484, 672
13
6, 7, 8
6 = fastest,
8 = slowest
Grade /
Temperature
C: Commercial (TJ = 0°C to +85°C)
I: Industrial
(TJ = -40°C to +100°C)
A: Automotive (TJ = -40°C to +125°C)
MAX 10 FPGA I/O Standard Support
I/O Standard
Single-Ended
External Memory
Interfaces
(& Voltage
Referenced I/O)
LVDS
14
Variant
LVTTL/LVCMOS 3.3V
LVTTL/LVCMOS 3.0V
LVTTL/LVCMOS 2.5V
LVTTL/LVCMOS 1.8V
LVTTL/LVCMOS 1.5V
LVTTL/LVCMOS 1.2V
PCI
Schmitt Trigger (RX only)
SSTL2 Class I
SSTL2 Class II
SSTL18 Class I
SSTL18 Class II
SSTL15 Class I
SSTL15 Class II
SSTL15
SSTL135
HSUL12
HSTL18 Class I
HSTL18 Class II
HSTL15 Class I
HSTL15 Class II
HSTL12 Cass I
HSTL12 Class II
Dedicated LVDS (RX/TX) 3
Dedicated Mini-LVDS (TX) 3
Dedicated RSDS (TX) 3
Dedicated PPDS (TX) 3
External Resistor LVDS (TX)
External Resistor Mini-LVDS (TX)
External Resistor RSDS (1R) (TX)
External Resistor RSDS (3R) (TX)
External Resistor PPDS (TX)
LVPECL (RX only)
BLVDS (RX/TX)
Toggle Rate 1 (MHz)
250
250
250
250
200
250
200
250
250
300
300
300
300
300
300
200
300
300
300
300
200
200
830/800 Mbps
380 Mbps
340 Mbps
420 Mbps
600 Mbps
380 Mbps
170 Mbps
342 Mbps
420 Mbps
830 Mbps
830/475 Mbps
Max Strength
2 mA
16 mA
16 mA
12 mA
8 mA
8 mA
12mA/50 W
16 mA/25 W
12mA/50 W
16 mA/25 W
12mA/50 W
16 mA/25 W
34 W
34 W
34 W
12mA/50 W
16 mA/25 W
12mA/50 W
16 mA/25 W
12 mA/50 W
14 mA/25 W
16 mA
Load
10 pF
10 pF
10 pF
10 pF
10 pF
10 pF
10 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
7 pF
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
6 pF 2
Application
General purpose
General purpose
General purpose
General purpose
General purpose
General purpose
General purpose
General purpose
DDR1
DDR1
DDR2
DDR2
DDR3
DDR3
DDR3
DDR3L
LPDDR2
DDR2+/QDR2+/RLDRAM2
DDR2+/QDR2+/RLDRAM2
DDR2+/QDR2/QDR2+/RLDRAM2
DDR2+/QDR2/QDR2+/RLDRAM2
General purpose
General purpose
Notes:
1.
Toggle rate (maximum) assumes max.
drive strength, fastest slew rate setting
for the specified load, and fastest speed
grade (–c6).
2.
Measured on a single pin, not pair.
3.
Only available on the bottom I/O banks
(Bank3, Bank4).
3 Early Access Programs for MAX 10 FPGA
2013
2014
Jul.
Aug.
Sept.
Oct.
Nov.
Dec.
Jan.
Feb.
Mar.
Apr.
May
Jun.
Jul.
Aug.
Sept.
Oct.
Nov.
Dec.
#1 - EIP
Rev.
MAX 10 FPGA
Device Handbook
13.1
#2 - ESP
Rev.
Rev.
14.0
14.1
#3 - EDP
Early Information Program
Early Software Program
Early Device Program










 Limited # of customers
 ES and/or EAP device shipments
 10M04, 08, 40, and 50 ES p/n’s
 Early .POF / .SOF support
Unlimited # of customers
Monthly bulletins
Advanced Info. Brief
Preliminary handbook
Other “specials”
15
Limited # of customers
Hidden S/W in v13.1 (10M08 only)
Production S/W in v14.0 (all devices)
Compilation & early timing
EPE
MAX 10 FPGAs Summary

MAX 10 FPGAs revolutionize non-volatile integration
 Single-chip, non-volatile solution with the smallest footprint
 Only dual-persona single-ship, non-volatile solution
 Integrated ADC and other system-cost saving hard IP
 Up to 95% dynamic power savings via sleep mode
 Ideal for both datapath and control plane applications
MAX 10
FPGA
Devices
FPGA
16
Non-Volatile
What’s Next?

1H 2014
Early Information Program

2H 2014
Devices & Dev Kits Shipping
Would you sign-up for monthly
email updates on MAX 10 FPGAs
(with valid NDA)?
17
Confidential Material
Back-Up Information
MAX 10 FPGA M153 Package – “Easy PCB” Footprint
Intentionally created gaps in ball grid
array to allow space for PCB traces
and/or through-hole via’s.
8mm
Goal: “Easy” PCB board design
1. Use 0.8mm pitch design rules
instead of 0.5mm rules.
• 2 layer signal breakout (SMD on
both component and PCB)
• 3 mil line/space
• 16 mil PTH
• Shared P/G PTH
2. Avoiding use of blind or buried via’s.
0.5mm
8mm
3. Minimize the number of PCB layers
needed to route to all device pins.
Note: Altera recommended PCB layout (preliminary) in 4Q 2013
19
Click to return to page 13
Thank You
Download