HOME
BUSINESS
INDUSTRY
1
The Lite-2GP
LITE 2GP
GSM/GPRS
After an actualization and
preceding the
PSTN
SMS
configuration, the JR Lite2GP communicator is able
ETHERNET IP
to make the bidirectionality
Ethernet
by GPRS or Ethernet with
PSTN
any control panel of the
LITE 2GP-IP
market with modulation
Ethernet
Bell 103 or V21, this
GSM/GPRS
function is only available
PSTN
SMS
from the 5.25 firmware
version.
2
Features
Phone communicator for alarm panel
The Lite-2GP range of ATS enable to
Programming through the JR E-light software
users to substitute a traditional alarm
2 zones + 2 outputs
systems with PSTN communication by
SMS remote control
an IP base and/or by a wireless
network, without have to improve or
Bidirectionality with any other control panel on the
market if you have the V21 or Bell 103.
(DSC, Ademco,Honeywell, Paradox,Bosch, Risco,
Network NX-8/NX-4, Texecom, Aritech,Pyronix or
Napco).
change the alarm system.
The system ATS LITE2-G is the only
eauipment which, quickly and costeffectively, offer an access to any alarm
system to the alternatif network, such
as GSM, GPRS et Ethernet.
3
Rules
The equipment was made to comply with all safety rules in accordance with
the European directives :
2004/108/EC
General directive of electromagnetic compatibility
2006/95/EC
Directive of low tension.
99/5/CE
Directive R&TTE
EN 60950-1
Equipement of information technology. Safety.
TBR21
Access to the PSTN.
EN 50 131-1
Grade 2
EN301489-1
Requirements for intruder alarm systems.
EN50136
Alarm transmission system.
electromagnetic compatibility norms( CEM) for radioelectric
equipments and services.
4
Tecnicals features
Environmental class
Operating Temperature
Operating Humidity
Power card
Class II
de -10 à +40 C ̊
0…75% without condensation
9...15VDC - 500mA
Dimensions
Length
Width
Depth
weight(approximate)
Antenna
5 cm
11 cm
5 cm
200 g
Performance
Frequency
2.15dBi
900/1800Mhz
Average consumption
PCB
GSM Module
Ethernet Plug-in
With activated GSM calls
With input GSM calls + ringer
45mA
15mA
40mA
300mA
500mA
Zone RFL
Normal
Tamper
Sorties (Collecteur ouvert)
2K2Ω
820 Ω
O1
O2
Negative / 100mA
Negative / 100mA
5
Working mode for control panel
1
Control panel bidirectionality software: Makes a bidirectional connection request to the
phone number of the control panel.
2
Com0com: forward this request to the Com2log Vmodem Server by its virtual ports COM.
3
Com2log Vmodem Server: receive the request.
4
Com2log Vmodem Server: communicate via the local network with the JR-Log-MCP to ask
a connexion with the control panel which have this number.
6
5
JR-Log-MCP :Receive the request from the Com2log Vmodem Server.
6
JR-Log-MCP : Check in its data base the subscriber number corresponding to the telephone
number required. When you will find the subscriber number, ask that the CS-LT-2G / CS-4G
establish a direct bidirectional connexion with the software Com2log Vmodem server.
7
CS-LT-2G / CS-4G : Receive the request from the JR-Log-MCP.
8
CS-LT-2G / CS-4G : establish a bidirectional communication from the alarm central to the établit
Com2log Vmodem Server.
9
Com2log Vmodem Server : receive the connexion from the CS-LT-2G / CS-4G. From there, the
bidirectional connection is established between the alarm central of the user and the bidirectional
software of the brand of the control panel.
7
Working mode for installers
8
1
Control panel bidirectionality software : Makes a bidirectional connection request to the
phone number of the control panel.
2
Com0com: Forward this request to the Com2log Vmodem Server by its virtual ports COM.
3
Com2log Vmodem Server: receive the request.
4
Com2log Vmodem Server: communicate through internet with the JR-Log-MCP (situated in
the control panel which make the maintenance of its facilities) to ask a connexion with the
control panel which have this number.
5
Agent: Observes the window with the SMS request on the computer where the Com2log
Vmodem Server is installed.
6
Agent: Sends the SMS requested to the phone number of the CS-LT-2G / CS-4G.
7
CS-LT-2G / CS-4G: Receive the request from the JR-Log-MCP.
8
CS-LT-2G / CS-4G: establish a bidirectional communication from the alarm central to the
établit Com2log Vmodem Server.
9
Com2log Vmodem Server: receive the connexion from the CS-LT-2G / CS-4G. From there,
the bidirectional connection is established between the alarm central of the user and the
bidirectional software of the brand of the control panel.
9
C/ Rosselló 52-54
E-08029 Barcelona, España
Telf. +34 934948440
Fax. +34 934102221
jrsecurity@jrsecurity.com
www.jrsecurity.com
10