PHOTOVOLTAIC MODULES TYPE
SAM60/6
General specifications
Manufacturer
Production site
Cells type
Cells dimension
No. of cells
Glass type and thickness
Junction box
No. of by-pass diodes
Connections
Frame
Sunage S.A.
Switzerland
Monocrystalline silicon
Pseudosquare 156x156mm 3busbars
60
Texturized solar glass 4mm thick
Aluminium junction box IP 67 Safety Class II
3, Schottky type
2 cables 1m long
MC4 compatible connectors
Anodized aluminum
Warranty
Whole product
Power output
10 years
Linear decay ≤ 0.8%/year up to 25 years
Certificates
IEC 61215 Ed.2.0 - EN 61730-1 - EN 61730-2
Mechanical specifications
Height (mm)
Width (mm)
Thickness (mm)
Weight (Kg)
Maximum snow load
Maximum wind speed
Hail
1.658
993
35
22
5.400 Pa
130 Km/h
Ø 25 mm; V= 23 m/sec
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
AA (mm)
35
1.000
993
1.658
1.000
958
grounding hole Ø 4
mounting hole Ø 6 x 12
Tolerance ± 2%
In order to correctly and safely install the modules
please refer to Sunage Installation Manual
** The electrical specifications are measured under STC conditions (1000 W/sqm, 1.5 Air Mass Spectrum, cells
temperature 25°C); the reference module used to set our Sun Simulator has been calibrated by SUPSI University in
calibration tolerance and of the guaranteed performances of the ENDEAS Quick Sun 700A simulator.
Electrical specifications**
Module
Nominal
power
(Wp)
Tolerance
(Wp)
Vmp
(V)
Imp
(A)
Voc
(V)
SAM 60/6 250 Wp
250
+4,9/-0
30,05
8,32
37,50
SAM 60/6 255 Wp
255
+4,9/-0
30,32
8,41
SAM 60/6 260 Wp
260
+4,9/-0
30,61
SAM 60/6 265 Wp
265
+4,9/-0
SAM 60/6 270 Wp
270
+4,9/-0
NOCT: 45°C
Maximum system voltage: 1000 V
Isc
(A)
*Current
Temp.
Coeff. α
(%/°C)
*Voltage
Temp.
Coeff.β
(%/°C)
*Power
Temp.
Coeff. γ
(%/°C)
8,86
0,05
-0,33
-0,42
37,70
8,92
0,05
-0,33
-0,42
8,50
37,92
8,98
0,05
-0,33
-0,42
30,89
8,58
38,15
9,03
0,05
-0,33
-0,42
31,18
8,66
38,42
9,08
0,05
-0,33
-0,42
Operating temperature: - 40 °C + 85°C
* The thermal coefficients refer to Isc,Voc e Pn
Release 5.0 - 11/ 2013