HL18 Haz-Lock Series 2 x 2 H.I.D. Luminaires for Recessed Flange Installation (400-Watt Max) Class I, Division 2, Group A, B, C, D. Project: Specifications: Fixture Type: Housing: Lapped and spot welded 20-gauge CRS or stainless steel construction. National Sanitation Foundation (NSF) Listed gasketing material provided to seal housing flange to ceiling structure. Cross Section Door Frame: One-piece type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8” stainless steel aircraft cables. Door frame gasketed to housing and secured with 12 captive flush mounted stainless steel fasteners. See Options for 85 PSI rating (HD-85). 16.0” Reflector: Die-formed semi-specular aluminum reflector. Vertical lamp, Type V distribution. Lens: Inverted .156” C73 tempered glass lens silicone sealed in door frame and secured with continuous stainless steel lens retention system. Lamps: See lamp options listed below. Lamps supplied by others. Mogul base sockets standard. See Options for medium base sockets (MBS). Electrical: CWA high power factor, open core and coil ballast standard. See Options for encapsulated ballast. Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all CRS housings. Stainless steel doorframes are satin polished unless option WHT is chosen. Installation Detail Ceiling Cutout TO U T Installation: Adjustable toggle arm mounting system is standard. Meyers Hub (ST-1) provided for field drilling. CU 23.75” 23.0” N EW SI ZE � � Listings: UL and CUL Listed for Wet Location and Hazardous Locations, Class I, Division 2, Groups A, B, C & D. IBEW Union Label. Note: This fixture is not for T- Grid installation. 23.75” � 23.0” � Ordering Information: HL - F Series Installation Type - - Material - Size - Lamps Voltage HL F = Flange 1 = CRS Hsg, & CRS Door 120V 2 = CRS Hsg. & SS Door 277V 3 = SS Hsg. & SS Door 347V 541 = 2’ x 2’ Housing 150PMH = 150-Watt Pulse Metal Halide 175MH = 175-Watt Metal Halide 250PMH = 250-Watt Pulse Metal Halide 250MH = 250-Watt Metal Halide 400PMH = 400-Watt Pulse Metal Halide 400MH = 400-Watt Metal Halide Options H/FF =KTK Fuse & Holder H/FD = Two KTK Fuses & Holders MBS = Medium Base Socket ENC = Encapsulated Ballast GG = N.S.F Listed Gasketing HD1700 = 1700 P.S.I. Hosedown PF = Plaster Frame WHT = White Finished Stainless Door * Note: Quartz restrike is not available for Hazardous Locations. Consult Factory for other standby or emergency lighting options. Kurtzon Lighting / Quality Since 1898 Website - www.kurtzon.com Morris Kurtzon, Incorporated 1420 South Talman Avenue, Chicago, Illinois 60608 773/277-2121 FAX 773/277-9164 © 2008