Klean-Lock Cleanroom Series
4’ Corner Mount Luminaires with T5, T5HO, T8 and LED Sources
Certified for ISO 3-9, 209E Class 1-100,000 Cleanspaces
LED
FLUORESCENT
Project
Fixture Type
Cat. Number
Approved By
SPECIFICATIONS
Housing: CRS or type 304 stainless steel or aluminum construction.
HOSE DOWN
3-9
3&4
Door Frame: One-piece 18 gauge CRS or 20 gauge type 304 stainless steel door frame with 90° bevelled edges.
Door frame suspended from housing by two 8” stainless steel aircraft cables. Door frame sealed to housing with NSF
gasket and secured with flush mounted stainless steel captive fasteners.
1700
PSI
NSF
Reflector: Full reflector panel white powder coat finished (minimum reflectivity 92%).
FOOD ZONE
Lens: High durability .135” thick acrylic with inverted P12 prismatic pattern. Sealed to Door with NSF listed RTV
silicone. See “Options” for other choices.
Sources: T5, T5HO, T8 and LED (Fluorexscent lamps supplied by others.)
Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt).
LED drivers are commercially available high efficiency and dimmable programmable drivers with 0-10v control.
Suitable for through wiring.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options
for white powder coated stainless.
Installation: Four .312” holes for corner mounting. Two 1/2” trade size flattened and silicone sealed knockouts for
wiring.
Listings: ETL and UL Listed for Wet Location. Dust and water resistance rated IP-66. NSF -C2 listed for food zone.
Suitable for use in FDA & USDA inspected facilities. Rated at 1700 PSI Hosedown.
5/10 Year Warranty: The driver(s), ballast(s), LED’s and EM packs are covered by a five (5) year warranty. The remaining
fixture is covered by a ten (10) year warranty. See warranty statement at kurtzon.com for complete details.
Installation
InstallationDetail
Detail
(Top
(Top&&Rear)
Rear)
(4)
(4).312”
.312”Holes
Holes
(2)
(2).875”
.875”KO's
KO's
7.50”
7.50”
3.75”
3.75”
36.0”
36.0”
48.125”
48.125”
Series Profile
Material
Size
Source: Fluorescent OR LED
KL
1: CRS Hsg. & CRS Door
2: CRS Hsg. & SS Door
3: SS Hsg. & SS Door
4: AL Hsg. & SS Door
40: 4’ Housing
1, 2 or 3/T8: F32T8
1, 2 or 3/T5: F28T5*
1 or 2/T5HO: F54T5HO*
COR:
Corner
Delivered lumens
and input wattage
2/LEDR30: 3000K CCT, 4500 lm, 76W
2/LEDR35: 3500K CCT, 4500 lm, 76W
2/LEDR40: 4000K CCT, 4500 lm, 76W
2/LEDR50: 5000K CCT, 4500 lm, 76W
Voltage
120V
277V
UNV*
347V*
Options
FF: Fuse & Holder
FD: Double Fuse & Holders
2/EB: Two Ballasts, (Two Circuits)
EBPRS: Program Rapid Start Ballast
EBDIM: Electronic Dimming Ballast
HLO: High Light Output Ballast*
EM: 1100 lm LED Battery Pack
1/EM: 1 Lamp Battery Pack (700L)
2/EM: 1 or 2 Lamp Battery Pack (1400L)*
CRM: Custom Row Mounting*
TP: Stainless Steel Tamperproof Fasteners
WHT: White 430 Finished Stainless Steel
PxL: Programmed to User Specified Lumen Value.◊
PxW: Programmed to User Specified Wattage Value.◊
A19: .156” Prismatic P19 Pattern Clear Acrylic
Note: Not all options are compatible with every option. Ex: EBPRS is not Compatible with EBL. *Consult factory for multiple options marked.
KL
KL
COR
40
ORDERING INFORMATION
ORDERING INFORMATION
___V
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.