PROJECT INFORMATION
LUXTRAN™
Job Name
Fixture Type
LTD SERIES
Catalog Number
Approved by
PRODUCT FEATURES:
»»Surface mount; ceiling or wall – 12"×24"
(30.48 cm × 60.96 cm)
»»Tool-less door access/removal
SPECIFICATIONS:
HOUSING: .100" (.254 cm) thick aluminum alloy. Type III anodized finish. All external stainless steel hinges, latches, mounting and fastening hardware are isolated from aluminum with acetyl resin
shims and bushings for superior corrosion protection.
REFLECTOR: Fabricated aluminum. Type III, medium cut-off distribution.
DOORFRAME: 16-gauge type 304 stainless steel. One piece, seam-welded, lapping construction. Four (4) stainless steel quarter-turn rotary pull latches secure the door frame to housing. Two (2)
stainless steel pin and socket style take-off hinges allow for complete door removal. Door frame is suspended from the housing via two (2) removable stainless steel aircraft cables.
LENS: .250" (.64 cm) thick clear tempered glass, sealed to perimeter ledge of lens frame aperture with silicone sealant, and secured to door frame with continuous lens retention system.
GASKET: One piece closed cell extruded silicone gasket seals door frame to housing.
ELECTRICAL: 480 VAC, 60Hz input power. Shock absorbing Mogul socket. Ballast starting temperature to –20°C. Quick connects for ballast and lamp socket. Power is supplied to the luminaire by a
3-wire, 600VAC, 20A rated electrical harness consisting of a reverse service, waterproof female plug and 6 feet of SOOW cable. An accompanying reverse service, waterproof male receptacle is installed
to the back of the fixture housing, and wired to the fixture electrical gear tray. The female plug and male receptacle are pin-and-sleeve style, with a thermoplastic body.
INSTALLATION: Two (2) 14-gauge type 304 stainless steel mounting brackets, mechanically fastened to housing, secure luminaire to 1-5/8" (4.13 cm) suspended strut. Strut by others.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. Rated to 4G in vertical axis.
IP65
4G
ORDERING INFORMATION (Ex: LTD1224-1-250S-1-480)
Model
LTD1224
Lamp Quantity
1
Lamp Quantity
1
One
Lamp Type
Ballast Quantity
Lamp Type
250S250 Watt HPS
400S400 Watt HPS
Ballast Quantity
1
One
1
Voltage
480
Voltage
480 480 Volts
DIMENSIONAL DATA
END VIEW
DOOR GASKET DETAIL
14.13"
35.89 cm
11.26"
28.60 cm
SIDE VIEW
25.13"
63.83 cm
9.50"
24.13 cm
26.32"
66.85 cm
16.40"
41.66 cm
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
LTD1224-120915