Aftermarket Vibration
Monitoring System (AVMS)
For Industrial Gas Turbines up to 15 MW
Answers for Energy
Siemens Energy is a world leader in industrial gas turbines for power generation
and mechanical drive applications. As part of the comprehensive portfolio of
customer services activities, Siemens Industrial Turbomachinery Ltd can offer a
Vibration Monitoring System for our fleet of small gas turbines.
Maintaining Customer Operations
The Aftermarket Vibration Monitoring System has been
designed to fulfil the need for a cost effective monitoring
system to replace existing units. The AVMS is built around
a series of specially configured vibration monitoring
systems. The proven technology in a compact, cost
effective unit enables these vibration monitoring systems
to be utilized for both aftermarket and new product lines.
The AVMS is based on the ENTEK XM Series of vibration
monitoring modules. These XM units are capable of
monitoring signals from a wide variety of sensors. The
XM modules are of a compact size and fit directly to a
35mm terminal rail, which makes the system capable of
replacing most other systems without the need for
additional cabinet space.
Options
Additional master and slave relay units - A
maximum of twelve additional relays can be catered
for in the AVMS. This allows for replacement of hard
wired shutdown systems.
Optional connection to a PLC controller - As an
alternative to the analogue outputs, the AVMS may be
connected to a PLC by a DeviceNet™ fieldbus
communication link.
Replacement probes.
Obsolescence
Health &
Safety
Customer Benefits
Compact modules - These units are capable of
replacing most other systems with out the
requirement for additional cabinet space.
Pre-installed software configuration - Software is
pre-installed which means that the customer is only
required to connect the input and analogue outputs
in order to use the AVMS.
Cost
Reduction
Benefit by
Mods & Ups
Reliability
Performance
Environment
Digital signal sensing and processing - This gives a
product which is both reliable and predictable.
www.siemens.com/energy
Published by and copyright © 2013:
Siemens AG
Energy Sector
Freyeslebenstrasse 1
91058 Erlangen, Germany
Siemens Energy, Inc.
4400 Alafaya Trail
Orlando, FL 32826-2399, USA
For more information, please contact
our Customer Support Center.
Phone: +49 180 524 70 00
Fax:
+49 180 524 24 71
(Charges depending on provider)
E-mail: support.energy@siemens.com
www.siemens.com/energy
Energy Service Division
LCN 2013 - F33.17 LN
Printed on elementary chlorine-free
bleached paper.
All rights reserved. Trademarks mentioned in
this document are the property of Siemens AG,
its affiliates, or their respective owners.
Subject to change without prior notice.
The information in this document contains
general descriptions of the technical options
available, which may not apply in all cases.
The required technical options should
therefore be specified in the contract.