LPS-100
https://www.gigahertz-optik.de/en-us/product/LPS-100
Product tags:
Gigahertz-Optik GmbH
1/4
Description
LPS-100 Single Channel 100W/14V Lamp Power
Supply
The LPS-100 is a microprocessor-based power supply for the operation of lamps up to 100W
and 14V requiring high resolution controllable with very low noise operating current such as
calibration standard lamps and auxiliary lamps. It is set-up for full remote control operation in
CW mode via its RS232/RS485 interface. Its design includes a high resolution 16 bit digital to
analog converter for precise current control. For lamp filament protection it offers a time
adjustable on/off ramp function. DLL and Labview VI are available.
Specifications
DC input voltage
18VDC - 24VDC
DC input connector
Phoenix MSTB25/2GF (5.00)
Output power LPS100
100W / 0 - 10A / max. 13.5V
Output connector
Phoenix MSTB25/4GF (5.00)
Resolution of output current
0.2mA
Temperature stability
+-0.3mA / °K
Stability
+-1mA (60 minutes after switch on of output current, constant environment) for 8 hours
LED green
blinking slow: DC input voltage present
blinking fast: Current ramp active
continuous: output switched on
LED red
continuous: error condition
Key
output current on / off
Earth connection
at back side
Remote interface
RS232 / RS485: 19200 Bd, 8D, 1S, N
Control input
4VDC – 30VDC, input resistance 20kOhm, opto coupler isolated
Temperature range
operation: 10 - 30°C (with free air flow)
storage: 5 - 50°C
Size:
105mm x 80mm x 45mm
Weight:
500g
CE conformity
the device conforms with the requirements set out in the council directive on the approximation of the
laws of the member states relating to electromagnetic compatibility (89/336/EEC). For the evaluation
regarding electromagnetic compatibility, the following standards were applied: EN 61000-6-2:2001, EN
55011 - Class B, EN61000-3-2
RoHS
compatible
Warranty
12 month
Configurable with
Gigahertz-Optik GmbH
2/4
Produktname
Product
Image
BTH-19
Description
Show product
Bench-top and rack housing for 3HE rack modules.
https://www.gigahertzoptik.de/enus/product/BTH-19
Features: The bench-top housings are available in half, third or
full 19” widths. Power supply modules for (110-230) V, 50/60 Hz
with low DC voltages for both external devices and those within
the housing.
S-SDK-LPS
Software Development Kit for LPS variants (power supply)
https://www.gigahertzoptik.de/enus/product/S-SDK-LPS
Purchasing information
Article-Nr
Modell
Description
Product
101453
LPS-100-RM
Power supply module. Rack-mount housing
101468
LPS-100-BT
Power supply module. Bench-top housing
Software
15298224
Gigahertz-Optik GmbH
S-SDK-LPS
Software Development Kit for the implementation of a LPS or
variants into custom made software
3/4
Contact Person
Gigahertz-Optik GmbH
Tel. +49 (0)8193-93700-0
Fax +49 (0)8193-93700-50
info@gigahertz-optik.de
Gigahertz-Optik GmbH
Powered by TCPDF (www.tcpdf.org)
4/4