INNOTEC-Netzgeräte GmbH
Homepage: www.innotec-ps.com
E-Mail: info@innotec-ps.com
Company profile
The company INNOTEC-Netzgeräte GmbH develops, produces and sells power supplies for
research, education and industrial applications. The main focus is laid on custom specific solutions
up to about 1500W output power. INNOTEC-Netzgeräte GmbH is for over 20 years working in this
business and has a large range of experience in developing of power supplies.
Based on a functional specification document of the customer we develop an optimal on the
customers needs focused power supply. We offer linear and/or switch-mode solutions. The power
supplies can be produced ether in house including end-testing or through the customer at en
external manufacturer later. Our production is under production surveillance of UL, VDE and ETL
regarding our production of medical approved power supplies.
Development: INNOTEC-Netzgeräte GmbH creates together with the customer a functional
specification document. Based on the complexity of the product there are made functional models
and/or prototypes for approval of the final product through the customer. We are performing a
various of tests including EMC (incl. Line and field conducted noise), safety, functional and
specification tests. Finally all the required documentation for the production of the power supplies
is created, including test procedures for the final testing. In the end of the development phase, we
can guide the customer to get approvals like UR, UL, VDE, ETL end so on.
Power range: We can produce power supplies up to 5000V, up to 100A and up to 1500W output
power. We realising special functions as there are arbitrary controls, special measurement
methods and analogue or digital control of the power supplies.
Production: We produce single units for research labs and up to serial products of some 1000
units. The printed circuit boards can be in SMT and/or THT technique. 100% of the produced units
are laid under a final test and burn-in.
Services: We also offer an order development including the development work, creating the
production documentation and if it is requested also guiding the customer to get approvals for the
products. We can also do order production including printed board assembling, mounting, cable
confection and final testing for electronic devices and assemblies.
Specials: Based on the long experience (over 20 years) in business of developing and producing
power supplies, we are also able to implement special functions like redundant measurements,
limit value monitoring, measurements in critical environments, current measurements from some
pA up to some 100A.
INNOTEC-Netzgeräte GmbH
Lochfeldstraße 30, D-76437 Rastatt / Deutschland
Charles Vogt, Business executive
E-Mail: c.vogt@innotec-ps.de, Handy: +49 176 102 240 13
INNOTEC-Netzgeräte GmbH
Lochfeldstrasse 30
D-76437 Rastatt / Deutschland
Telefon: 07222 - 820 366
Telefax: 07222 - 820 367
Ust.-Id.-Nr.: DE 162 850 994
Geschäftsführung:
Charles Vogt, Dipl.-Ing. HTL
AG Rasttt, HRB-Nr. 521494
Bank:
VR-Bank in Mittelbaden, Iffezheim
BLZ: 665 623 00, Kto.-Nr. 19801
A set samples of custom specific power supplies
INT5200
Output values: 5200Vdc
Specials: Output current measurement down to
< 1µA
Alarm setting (0 – 100µA) for the
output current with short response
time (<2ms)
Digital readout of the output current
Several protection and alarm
functions
INT320-40
Output values: 40Vdc / up to320W
Specials: Optimised for high efficiency, in case
of a bad thermal management aound
the power supply
Very compact and a high power
density
Wide input voltage range and PFC,
resonance converter
SWR500
Output values: 0 – 60V / 0 – 30A
up to 500W
Specials: External control and read-back of the
output voltage and current
External ON/OFF control
Sense lines to compensate the
voltage losses on the output lines
OEM product for mounting in a
custom electric cabinet
BDC300
Input values: 8 – 15Vdc
Output values: 14 – 17Vdc / up to 300W
Specials: To supply measurement systems in
cars with charge control for specific
batteries
µC-controlled charger and status
monitoring
External ON/OFF control
Temperature controlled fan
2 von 2