SIVACON 8PS system LX - Flexible power distribution up

advertisement
© Siemens AG 2010
SIVACON 8PS system LX Flexible power distribution
up to 6300 A
SIVACON 8PS busbar trunking systems
High efficiency and through to flexible SIVACON power distribution for buildings and
industry from 800 A to 6300 A.
Greater cost-effectiveness
The system can be mounted in any position, thus offering easy and ideal planning
options. Various conductor configurations
enable safe and fast installation as well as
flexible expansion of the system LX, saving
both costs and time.
7
Increased safety
The system design offers protection
against adverse environmental conditions
as well as guaranteed protective conductor
protection due to the aluminum enclosure
and high short-circuit strength, thus guaranteeing continuous operational safety.
Highlights
7
Improved safety through type-tested
switchgear and controlgear assemblies
(TTA) according to IEC/EN 60439-1 and
IEC/EN 60439-2
7
Transport of high currents with low
voltage drop through the sandwich
construction
7
High protection in contaminated and
moist environments through IP55
7
Reliable fire protection through tested
fire barrier
7
Flexiblet through versatile conductor
configurations
7
High communication capability
The communication-capable busbar trunking system LX allows the consumption recording, remote switching and monitoring
of your power distribution.
7
Answers for infrastructure.
© Siemens AG 2010
System LXA/LXC up to 6300 A
Overview
Technical specifications
8PS LX
4
4
1
6
6
2
NSV0_01246
5
3
1 Trunking unit
4 Tap-off unit
2 Junction unit
5
3 Feeder unit
Distribution board connection
6 Accessories
Rated insulation voltage Ui
V AC/DC 1000
Rated operational voltage Ue
V AC
690
IP54/IP55
Degree of protection according to
IEC/EN 60529
Rated current Ie
A
800 ... 63001)
Rated peak withstand current Ipk
kA
... 255
Rated short-time withstand current
Icw
kA
... 150
3, 4, 5, clean Earth,
optionally 200% N conductor
Number of active conductors
Fire load
kWh/m
Max. 16.6
Fire load per tap-off point
kWh/m
2.9
Position of tap-off points
m
0.5 each on both sides
Tap-off unit
A
... 1250
Connection system
Bolt-type terminal block
with bolt-type shearing
screw head
Communication capability
instabus EIB,
AS interface
Conductor material
Insulated Al / Cu busbars
Enclosure material
Varnished Al
1)
6300 A upon request
Components
Straight trunking units
• 0.5 m to 3.0 m length
• Or without fire protection, can be optionally installed on-site
• Tap-off points on one or both sides
• 3-, 4-, 5- and 6-conductor systems with 200% N and clean Earth.
Tap-off units *)
• Pluggable up to 630 A with circuit breaker switches or fuse
switch disconnectors
• Can be connected via bolt-type terminal block from 800 A to
1250 A with circuit breaker.
Feeder units
• For connections to transformers and generators
• Type-tested connections to SIVACON power distribution boards
(S4, S8)
• Connections to cables.
Optional equipment
• Fixing bracket for horizontal and vertical fixing
• End flanges.
Junction units
• L-, Z- and T-shaped trunking unit enclosures.
* According to DIN EN 50110-1 (VDE 0105-1); please always ensure compliance with national regulations/standards
The information provided in this brochure contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as
a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice.
All product designations may be registered trademarks or product names of Siemens AG or
supplier companies whose use by third parties for their own purposes may violate the rights
of the owner.
© Siemens AG 2010 • PDF only: (E10003-E38-10T-G2111-7600) • PI 0410 En
Siemens AG
Industry Sector
Building Technologies Division
Postfach 10 09 53
93009 REGENSBURG
GERMANY
www.siemens.com/busbar
Download