Bakery | Food Zone | FP Series
Daily high pressure washdown.
Strong chemical sanitizers.
Cool damp operations.
Regular USDA inspections.
NSF required.
High light levels (50 fc, 540 lux).
Cold lamp starts.
Low light output and color shift.
Condensation and Corrosion.
NSF required.
Refrigeration Costs.
Daily high pressure washdown.
Strong chemical sanitizers.
Cool and wet conditions.
Regular USDA inspections.
NSF required.
High light levels (50 fc, 540 lux).
High temperatures (up to 200F).
Hazardous Locations .
Heat Enbrittlement of lens.
NSF required.
High light levels (50 fc, 540 lux).
Color Rendering, High CRI.
Top relamping and servicing.
HD1700 and IP-66 for water resistance.
Stainless Steel exposure.
Designed for walkable ceiling systems.
Meets USDA and FDA requirements.
NSF Food Zone Listed.
High temperature construction.
Haz. Loc. dust tight classified.
Stainless and Aluminum.
NSF Non-Food Zone.
Reduced Heat, No infrared
80 Color Rendering Index.
Low temperature ballasts.
High power LEDs.
Stainless and aluminum.
NSF Non-Food Zone.
Reduced heat, no infrared.
HD1700 and IP-66 for water resistance.
Stainless Steel construction.
Low temperature with EBL option.
Meets USDA and FDA requirements.
NSF Food Zone Listed.
Highest Efficiency troffers.
FP-F/TR Series Best in cleanroom and food zone features combined with top access.
WET LOCATION
209E
1
Bio Safety Levels
FED STD 209E
CLASS 1
ISO
3
ISO 14644-1
CLASS 3
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
NSF
FOOD ZONE
1700
PSI
Hosedown
KL Series- One piece overlapping doorframe
KL-F-2-2X4 Shown
WET LOCATION
209E
1
Bio Safety Levels
FED STD 209E
CLASS 1
ISO
3
ISO 14644-1
CLASS 3
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
NSF
FOOD ZONE
1700
PSI
Hosedown
WET LOCATION
ISO
5
ISO 14644-1
CLASS 5
209E
1
Bio Safety Levels
FED STD 209E
CLASS 1
IP
55
IEC 60529
Bio-Safety
BSL
3 & 4
NSF
FOOD ZONE
FP-D Series Provides a durable surface mount food zone choice
FP-D-2-40 Shown
FP-S Series- Extreme corrosion and moisture resistance
FP-S-3-2X4 Shown
WET LOCATION
209E
1
Bio Safety Levels
FED STD 209E
CLASS 1
ISO
3
ISO 14644-1
CLASS 3
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
NSF
FOOD ZONE
1700
PSI
Hosedown
Food Processing Series
1x4, 2x2 and 2x4 High Efficiency Sealed Luminaires
NSF listed, Certified for ISO-3, 209E Class 1 Cleanspaces
Specifications:
Housing: One piece, seam welded, hole free
20-gauge CRS, stainless steel or aluminum construction. Each are only 4.5 inches tall.
Door Frame: One-piece overlapping style
18-gauge CRS , 20-gauge type 304 stainless steel or aluminum door frame with 90° hinged to housing with two stainless steel cables. Secured by captive stainless steel screws.
Sources: T5, T5HO, T8 and high efficiency LED arrays (Lamps supplied by others.)
Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).
Lens: High durability .135” thick virgin acrylic with
P12 prismatic pattern inverted. Sealed to door with
NSF listed RTV silicone. See “Options” for other choices.
Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.
Installation: Grid: Standard luminaires accommodate 1.0” & 1.5” and some 2.0” T-Bar Grid.
Installation: Surface: Four .312” dia. mounting
Flange Section View holes and a removable gasketed wiring access plate.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro gasket with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage
(120-277 volt). LED drivers are commercially available high efficiency and dimmable with 0-10v control. Suitable for through wiring.
Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all recessed housings. Stainless steel doorframes and surface housings are satin polished unless option
WHT is chosen.
Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-66. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities. Certified ISO-14464-1 classes 3 to
9 Fed. Std. 209E Class 1. See “Options” for Class I, Div.
2 Groups A, B, C & D Listing (X12) & Class 1, 2 & 3 Div.
2 & 3 Groups A, B, C, D, F & G Listing (X22). Bio-Safety levels 3 & 4. Rated for 1700 PSI hosedown.
4.5”
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Optional Standard
WET LOCATION
ISO
3
ISO 14644-1
CLASS 3
209E
1
Bio Safety Levels
FED STD 209E
CLASS 1
IP
66
IEC 60529
Bio-Safety
BSL
3 & 4
NSF
NON FOOD ZONE
25
Year
Warranty
NSF
C-2 FOOD ZONE
Grid Section View
4.5”
Surface Section View
4.8”
Ordering Information
: (Example: FP-F-4-1x4-2/T5-UNV-FF)
FP - - - - / - -
Series Installation Type Material
FP F = Flange
G = Grid
S = Surface
1 = CRS Hsg. & CRS Door
2 = CRS Hsg. & SS Door
3 = SS Hsg. & SS Door
4 = AL Hsg. & SS Door
5 = AL Hsg. & AL Door
6 = CRS Hsg. & AL Door
Size Source
Qty/Type
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
2x4 = 2’x4’ Housing
Fluorescent
1, 2 or 3/T8 = F32T8
1, 2 or 3/T5 = F28T5*
1 or 2/T5HO = F54T5HO*
LED Arrays
Voltage Options
120V
277V
347V*
UNV*
1 or 2/LEDR30 = 4400L 3000k CCT
1 or 2/LEDR35 = 4400L 3500k CCT
1 or 2/LEDR40 = 4400L 4000k CCT
2, 3, 4 or 6/T5 = F14T5
2, 3, 4 or 6/T5HO = F24T5HO*
2, 3, 4 or 6/T8 = F17T8
1 or 2/T8U6 = T8 6” U-Lamp
2 or 3/T8U1 = T8 1.6” U-Lamp
2, 3 or 4/BX = PL-L, BX 40W*
2 or 3/LEDR30 = 2200L 3000k CCT
2 or 3/LEDR35 = 2200L 3500k CCT
2 or 3/LEDR40 = 2200L 4000k CCT
2, 3, 4 or 6/T8 = F32T8
2, 3, 4 or 6/T5 = F28T5*
2, 3, 4 or 6/T5HO = F54T5HO*
2 or 3/LEDR30 = 4400L 3000k CCT
2 or 3/LEDR35 = 4400L 3500k CCT
2 or 3/LEDR40 = 4400L 4000k CCT
FF = Fuse & Holder
FD = Two Fuses & Holders
2/EB = Two Ballasts, (Two Circuits)*
EBL = -20°F Electronic Ballast*
EBPRS= Program Rapid Start Ballast*
1/EM = 1 Lamp Battery Pack (700L)*
2/EM = 2 Lamp Battery Pack (1300L)*
H/EM = 1 Lamp Hazardous Battery Pack
WHT= White Finished Stainless Steel Door & Hsg.
LEX = .125” Prismatic Polycarbonate
A19= Prismatic P19 Pattern Clear Acrylic
HIA= High Impact P12 Pattern Acrylic
TG= Prismatic (C73) Tempered Glass
X12= Class I, Div. 2, groups A, B, C, D listing.*
X22= Class 2, Div. 2 & 3, groups A, B, C, D, F & G listing.* (Not available in Surface Mounted)
SW= Sealed Wireway (contact Kurtzon for details)
† = SS Hsg. not available with 6/T5HO
* Note: Not all options are compatible with other options. Consult factory for additional lamp choices & options marked "*".
Food Processing Series
8 Lamp Sealed High Bay Luminaires for Pendant or Surface Installation
ISO-5, 209E Class 100 Cleanspaces
Specifications:
Housing: Optimized for water shedding, one piece 20 ga. welded stainless steel or aluminum. Seam welded seams.
Door Frame: One piece 20-gauge aluminum or type 304 stainless steel one piece inset door frame hinged to housing with 2 stainless steel cables. Secured by captive stainless steel screws. Hose Down 1700 PSI optional.
Lens: Clear .125” thick virgin acrylic set in
NSF silicone sealant.
Electrical: Standard two, four lamp instant start ballasts for T8. Electronic less than 10%
THD high performance instant start universal voltage (120-277 volt). See options for other choices.
Reflector: High reflectance white (92% refl.) white polyester powder coatings over steel.
Lamps: T8 or T5HO type. Lamps are supplied by others unless specified below.
Gaskets: NSF listed closed microcellular extruded one piece SealPro gasket seals door frame to housing. Oil and solvent resistant gasket system.
Installation: Pendant, Y-Cable or Chain mount systems available. Power entry through sealed access plate knockouts on rear of fixture at center.
Finish: White polyester powder coating over steel, and aluminum housings. Rated
1000hr Salt spray corrosion protection over steel. Stainless steel housings and door frames are satin polished.
Listings: UL & CUL listed for wet locations.
IP-65 water and dust protection. Federal
Standard 209E, ISO 14644-1 Class 5, Cleanroom rated class 100. NSF Non-Food zone.
NSF Food Zone for stainless steel construction. (NSF Listing pending).
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Standard
WET LOCATION
209E
100
Bio Safety Levels
FED STD 209E
CLASS 100
ISO
5
ISO 14644-1
CLASS 5
Bio-Safety
BSL
3 & 4
IP
65
IEC 60529
NSF
NON FOOD ZONE
25
Year
Warranty
30”
Optional
NSF
C-2 FOOD ZONE
4.45”
2 ”
Uplight
Option
30”
48”
Ordering Information:
Example: FP-HB-3-40-8/T5HO-120V-CA-CP5-15P
FP - HB - - 40 - - - -
Series Installation Type Material
FP HB
= Sealed
Highbay
40 = 30”x48” Housing
Size Lamps Voltage Elect. Options General Options
1 = CRS Hsg. & CRS Door
2 = CRS Hsg. & SS Door
3 = SS Hsg. & SS Door ‡
4 = AL Hsg. & SS Door
5 = AL Hsg. & AL Door
6 = CRS Hsg. & AL Door
6 or 8/T8 = F32T8 32W T8 (G13) 0°F Starting
6 or 8/T5 = F28WT5 28W T5 (G5)* 0°F Starting
6 or 8/T5HO = F54WT5 54W T5HO (G5)* -20°F Starting
120V
277V
347V*
UNV*
TP = Stainless Steel Tamperproof Fasteners
WHT = White Finished Stainless Steel
HD1700 = 1700 psi Hosedown
HIA = .140" P12 High Impact Acrylic
CP = .
125" Clear Smooth Polycarbonate
LEX = .125" P12 Prismatic Polycarbonate
OCC = Wet Location Occupancy Sensor
Lz = Lamps Provided (“z”= lamp details)
UPL= 5% Uplight, Sealed Lenses (2)
Cord Options
CPx = Six Foot Cord and Plug(**)
LCPx = Six Foot Locking Cord and Plug(**)
FF = Fuse & Holder
FD = Double Fuse & Holders
2/EB = Two Ballasts, (Two Circuits)
EBL = -20°F Electronic Ballast
EBPRS = Program Rapid Start Ballast
EBDIM = Electronic Dimming Ballast
HLO = High Light Output Ballast (>1.15 BF)*
1/EM = 1 Lamp Battery Pack (700L)
2/EM = 1 or 2 Lamp Battery Pack (1400L)*
*
Note: Not all options are compatible with every option. Consult factory for additional
Lamp options & options marked "*".
**
Note: Cord and plug options are not water tight connections. A sealed cord bushing is provided at the fixture when a cord is specified.
Replace the "x" above with the NEMA cordset designation. 5-15P is standard for 120v and
7-15P is for 277v. For wet locations cordsets and other cord options please contact the factory.
‡ Only #3 material is NSF Food Zone. All other materials are non-food zone.
Food Processing Series
2’ , 4’ and 8’ Acrylic Food Zone Wraps Luminaires for Surface Installation
NSF listed, IP-55 Rated, Wet Location
Specifications:
Housing: Double channel housing of
20-gauge CRS, type 304 stainless steel or aluminum construction.
End Caps: Precision stamped 20-gauge type
304 stainless steel end caps secured to housing with standard stainless steel fasteners or optional hub assembly.
Gasket: Closed cell extruded SealPro™ NSF
Listed gasketing. Resists grease and solvents.
Reflector: High reflectance white powder coat finished (min. reflectivity 88%).
Lens: (Standard) Smooth surface .125" White/
Opal high impact blend virgin acrylic. Linear clear prismatic polycarbonate optional (LPx )
Sources: T5, T5HO, T8 and high efficiency LED arrays (Lamps supplied by others.)
Electrical: Standard ballast - Electronic less than
10% THD high performance instant start (0°F) universal voltage (120-277 volt). See options for other choices.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish.
See Options for white powder coated stainless.
Installation: Four .312” debossed holes for surface mounting. One .875” (1/2” trade-size) flattened and silicone sealed knockout located on back of housing for wiring. See below for other mounting and supply entry options. Rows: Joiner bands provided for continuous row mounting (See
Option: CRM). Please specify number of fixtures in each run.
Listings: UL and CUL Listed for Wet Location.
Rated IP-55 dust and water resistance. NSF Listed for Food, Splash and Non-Food zones.
Profile “A”
3.7"
Profile “B
5.5"
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Standard
WET LOCATION
HOSE DOWN
85
PSI
RATED
IP
55
IEC 60529
NSF
C-2 FOOD ZONE
25
Year
Warranty
Optional
Hazardous Location
Class 1 Division 2
4.50"
6"
FP-A-1 FP-B-4
9.00"
8"
2.6"
4.00"
Profile “C” Profile “D”
Ordering Information:
Example: FP-LPD-3-40-4/T8-UNV-FF
FP - - - - -
Series Lens Profile Material Size
FP
(Blank)= Opal Arcylic
LP= Linear Prismatic
(Clear Polycarbonate)
1 = CRS External & Internal
2 = SS Ext. & CRS Internal
3 = SS External & Internal
4 = AL Ext. & CRS Internal
A = 1 or 2 Lamps
1 LED Array
B = 2 Lamps
2 LED Arrays
C = 2 Lamps ◊
2 LED Arrays
D = 3-4 Lamps
2 LED Arrays
20 = 2' Housing
40 = 4' Housing
80 = 8' Housing
Lamps Voltage
Qty/Type
120V
277V
347V*
UNV
T8 = F17T8 (G13)
T5 = F14WT5 (G5)
T5HO = F24WT5 (G5)
1, 2 or 3/LEDR35 = 2200 Lumen Array(s)
1, 2 or 3/LEDR40 = 2200 Lumen Array(s)
1 or 2/T8 = F32T8 (G13)
1 or 2/T5 = F28WT5 (G5)
1/T5HO = F54WT5 (G5)
1, 2 or 3/LEDR35 = 4400 Lumen Array(s)
1, 2 or 3/LEDR40 = 4400 Lumen Array(s)
2, 4, 6 or 8/T8 = F32T8 (Tandem)
2, 4, 6, or 8/T5HO = F54WT5HO (Tandem)
-
FP-LPC-3 FP-D-1
Options
FF = Fuse & Holder
FD = Double Fuse & Holders
2/EB = Two Ballasts, (Two Circuits)
EBL = -20°F Electronic Ballast
EBPRS= Program Rapid Start Ballast
EBDIM= Electronic Dimming Ballast
HLO= High Light Output Ballast*
1/EM = 1 Lamp Battery Pack (700L)
2/EM = 1 or 2 Lamp Battery Pack (1400L)*
CRM = Custom Row Mounting*
TP = Stainless Steel Tamperproof Fasteners
SSH = Stainless Hubs (2) for Feed Thru Supply
HD85 = 85 P.S.I. Hosedown*
WHT= White Finished Stainless Steel
PMB= Pendant Mount Bracket
* Note: Not all options are compatible with every option. Ex: EBPRS is not Compatible with EBL. Consult factory for multiple options marked "*". ‡ Housings made of CRS or
Aluminum are NSF Non-Food Zone.
◊ Not available in 8 foot size.
Food Processing Series
4’ Corner Mount Luminaires with T5, T5HO, T8 and LED Sources
Certified for ISO-3, 209E Class 1 Cleanspaces
Specifications:
Housing: One-piece, seam welded, hole-free 20-gauge CRS or type 304 stainless steel or aluminum construction.
Door Frame: One-piece 18 gauge CRS or 20 gauge type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8" stainless steel aircraft cables. Door frame National Sanitation
Foundation (NSF) gasketed to housing and secured with 12 captive flush mounted stainless steel fasteners.
Reflector: Full reflector panel white powder coat finished (minimum reflectivity 88%).
Lens: High durability .135" thick virgin acrylic with inverted P12 prismatic pattern.
Sealed to Door with NSF listed RTV silicone. See "Options" for other choices.
Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)
Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially available high efficiency and dimmable with 0-10v control. Suitable for through wiring.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish.
See Options for white powder coated stainless.
Installation: Four .312" holes for corner mounting. Two .875" flattened and silicone sealed knockouts for wiring. See Options for Continuous Row
Mounting (CRM), Custom Corners (CC) and Custom Blank Fillers (CBF).
Listings: UL and CUL Listed for Wet Location. Dust and water resistance rated IP-66. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E Class
1. See "Options" for Class I, Div. 2 Groups A, B, C & D Listing (X12). Bio
Safety levels 3 & 4. Rated at 1700 PSI Hosedown.
7.50”
3.75”
7.50”
FP
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Cross Section
7.50”
36.0”
48.125”
8.44”
Installation Detail
(Top & Rear)
(4) .312” Holes
(2) .875” KO's
Ordering Information:
KL - COR - - - - -
Series Installation Type
KL COR = Corner
40 = 4’ Housing
Material
1 = CRS Hsg. & CRS Door
2 = CRS Hsg. & SS Door
3 = SS Hsg. & SS Door
4 = AL Hsg. & SS Door
Size Source Voltage
120V
277V
347V*
UNV*
1, 2 or 3/T8 =
1, 2 or 3/T5
1 or 2/T5HO
F32T8
= F28T5*
= F54T5HO*
1 or 2/LEDR30 = 4400L 3000k CCT
1 or 2/LEDR35 = 4400L 3500k CCT
1 or 2/LEDR40 = 4400L 4000k CCT
Options
FF = Fuse & Holder
FD = Double Fuse & Holders
2/EB = Two Ballasts, (Two Circuits)
EBL = -20°F Electronic Ballast
EBPRS= Program Rapid Start Ballast
EBDIM= Electronic Dimming Ballast
HLO= High Light Output Ballast*
1/EM = 1 Lamp Battery Pack (700L)
2/EM = 1 or 2 Lamp Battery Pack (1400L)*
GG = N.S.F. Listed Gasketing
CRM = Custom Row Mounting*
TP = Stainless Steel Tamperproof Fasteners
WHT= White Finished Stainless Steel
Standard
WET LOCATION
NSF
ISO
3
ISO 14644-1
CLASS 6
ISO 14644-1
CLASS 3
1
FED STD 209E
CLASS 1
C-2 FOOD ZONE
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
Kurtzon Lighting / Innovtors in Lighting Since 1898
* Note: Not all options are compatible with every option. Ex:
EBPRS is not Compatible with EBL. Consult factory for multiple options marked "*".
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164
Website - www.kurtzon.com
© 2013
Food Processing Series
Screwless Door Frame with T5, T5HO, T8 and LED Sources
NSF listed, Certified for ISO-3, 209E Class 1 Cleanspaces
Specifications:
Housing: One piece, seam welded, hole free 20-gauge CRS or stainless steel construction.
Door Frame: One-piece 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8"" stainless steel aircraft cables. Secured by 6 captive stainless steel torsion springs. Lockup system provides 1700 PSI hose down water resistance.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™ with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 88%)
Lens: High durability .135" thick virgin acrylic with inverted P12 prismatic pattern. Sealed to Door with NSF listed RTV silicone. See "Options" for other choices.
Lamps: Select lamp options listed below. Lamps supplied by others.
Electrical: Standard ballast - Electronic less than 10% THD high performance instant start universal voltage (120-277 volt). See options for other choices.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options for white powder coated stainless.
Installation: Four .312" holes for surface mounting. Flanged fixtures use yoke system for support. Grid fixtures are compatible with 1.0 and 1.5” T-Grid systems. At least two .875" flattened and silicone sealed knockouts for wiring. See below for mounting options.
Listings: UL and CUL Listed for Wet Location. Dust and water resistance rated
IP-65. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E Class 1. Bio Safety levels 3 & 4.
Ordering Information: (Example: KL-F/EZ-1-1x4-2/T5-UNV-FF)
FP - /EZ - - - / -
Series Installation Type Material
FP S/EZ = Surface †
F/EZ = Flange
G/EZ = Grid (1 & 1.5”)
Size Source
1 = CRS Hsg. & CRS Door
2 = CRS Hsg. & SS Door
3 = SS Hsg. & SS Door
4 = AL Hsg. & SS Door
Voltage
120V
277V
347V*
UNV*
-
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
Fluorescent LED Arrays
1, 2 or 3/T8 = F32T8
1, 2 or 3/T5 = F28T5*
1 or 2/T5HO = F54T5HO*
1 or 2/LEDR30 =
1 or 2/LEDR35 =
1 or 2/LEDR40 =
4400L 3000k CCT
4400L 3500k CCT
4400L 4000k CCT
2, 3, 4 or 6/T5 = F14T5
2, 3, 4 or 6/T5HO = F24T5HO*
2, 3, 4 or 6/T8 = F17T8
1 or 2/T8U6 = T8 6” U-Lamp
2 or 3/T8U1 = T8 1.6” U-Lamp
2, 3 or 4/BX = PL-L, BX 40W*
2 or 3/LEDR30 = 2200L 3000k CCT
2 or 3/LEDR35 = 2200L 3500k CCT
2 or 3/LEDR40 = 2200L 4000k CCT
FP
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Cross Section
Cross Section
Yoke (Standard)
24.0” x 48.0”
4.50”
4.50”
5.0”
Options
FF = Fuse & Holder
FD = Two Fuses & Holders
2/EB = Two Ballasts, (Two Circuits)*
EBL = -20°F Electronic Ballast*
EBPRS= Program Rapid Start Ballast*
1/EM = 1 Lamp Battery Pack (700L)*
2/EM = 2 Lamp Battery Pack (1300L)*
WHT= White Stainless Steel Door & Hsg.
LEX = .125” Prismatic Polycarbonate
A19= Prismatic P19 Pattern Clear Acrylic
HIA= High Impact P12 Pattern Acrylic
TG= Prismatic (C73) Tempered Glass
† = SS Hsg. not available with 6/T5HO
2x4 = 2’x4’ Housing 2, 3, 4 or 6/T8 = F32T8
2, 3, 4 or 6/T5 = F28T5*
2, 3, 4 or 6/T5HO = F54T5HO*
2 or 3/LEDR30 = 4400L 3000k CCT
2 or 3/LEDR35 = 4400L 3500k CCT
2 or 3/LEDR40 = 4400L 4000k CCT
* Note: Not all options are compatible with other options. Consult factory for additional lamp choices & options marked "*".
Standard
WET LOCATION
NSF
ISO
3
ISO 14644-1
CLASS 6
ISO 14644-1
CLASS 3
1
FED STD 209E
CLASS 1
C-2 FOOD ZONE
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
Kurtzon Lighting / Innovtors in Lighting Since 1898
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164
Website - www.kurtzon.com
© 2013
Food Processing Series
2x2 LED Top Access Highbay Luminaires for IMP Installation
Certified for ISO-3, 209E Class 1 Cleanspaces
Specifications:
Housing: Three piece, welded, hole free 20-gauge CRS stainless steel or aluminum construction. Electrical section is secured by latches for easy installation and servicing.
Trim Frame: One-piece 18-gauge CRS or type 304 stainless steel trim frame is not removable the room side for a sure seal. Trim Frame secured to the housing by 12
#12-24 screws installed from above. The seal is rated for 1700 PSI hose down (HD-
1700). All hardware is consealed for cleanability.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™ with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Heat Sink: Extruded aluminum high efficiency finish. Located on the fixture top.
Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 91%)
Lens: High durability .125" thick virgin acrylic with standard clear flat (no prisms) finish. See options for inverted high impact P12 prismatic pattern. All lenses are sealed to trim frame with NSF listed RTV silicone.
LEDs: Four Philips Fortimo Series HBMt 6000-54w-757 high brightness arrays that consist of 40 Luxeon LXA7-PW57 LEDs. CRI is rated at >70 for good color recognition. Commercial available arrays provides obsolesnece protection.
Electrical: Standard driver(s) - Electronic less than 20% THD high performance constant current programable and dimmable (0-10v). High power factor rated
>.95, with a supply voltage: 120-277 50-60hz and zero (0) off state power. Integral thermal protection feedback system allows assurance of long LED life and a 5 year manufacturer warranty. The remaining parts carry a 25 year Kurtzon warranty. See warranty statement for details.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel trim finish. See Options for white finished stainless trim.
Installation: Two .875" supply entrances for conduit connection. See below for mounting options.
Listings: ETL Listed for Wet Location. Dust and water resistance rated IP-66. NSF
-C2 listed for food zone.‡ Suitable for use in FDA & USDA inspected facilities. Certified ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1.
FP
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Ordering Information:
FP - IMP - - 2x2 - 4/LEDT657 - -
Series Installation Type Material
FP IMP = Recessed
Insulated Metal Panel
1
2
= CRS Hsg. & Trim ‡
= CRS Hsg. & SS Trim
2x2 = 2'x2’ Housing
Size Lamps Voltage
120V
277V
347V
UNV
4/LEDT657 = 6000 Lumen arrays 5700K CCT
Options
FF = Fuse & Holder
FD = Two Fuses & Holders
LEX = .125” Prismatic Polycarbonate
A19= Prismatic P19 Pattern Clear Acrylic
HIA= High Impact P12 Pattern Acrylic
WHT= White Finished Stainless Steel
Standard
NSF
ISO
3
ISO 14644-1
CLASS 6
ISO 14644-1
CLASS 3
1
FED STD 209E
CLASS 1
C-2 FOOD ZONE
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
Kurtzon Lighting / Innovtors in Lighting Since 1898
Input Ratings
Volts: 120-277
Amps: 2.0 (@120v)
.898 (@ 277v)
Watts: 231.8 (@120v)
231.1
* Note: Not all options are compatible with every option. Consult factory for multiple options marked "*". ‡ Trims made of CRS are NSF
Non-Food Zone.
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164
Website - www.kurtzon.com
© 2013
Klean Lock Advanced Clean Space Series
2x2 and 2x4 Top Relamp with T5, T5HO and T8 Sources
Certified for ISO-3, 209E Class 1 Cleanspaces
Specifications:
Housing: One piece, seam welded, hole free 20-gauge CRS construction. Gasketed top cover allows all services from above. Fully white powder coated.
Door Frame: One-piece 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8"" stainless steel aircraft cables. Secured by 12-14 captive stainless steel screws.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™ with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 88%)
Lens: High durability .135" thick virgin acrylic with inverted P12 prismatic pattern.
Sealed to Door with NSF listed RTV silicone. See "Options" for other choices.
Lamps: Select lamp options listed below. Lamps supplied by others.
Electrical: Standard ballast - Electronic less than 10% THD high performance instant start universal voltage (120-277 volt). See options for other choices.
Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all housings. Stainless steel doorframes are satin polished unless option WHT is chosen.
Flange Installation: Adjustable toggle arm mounting standard. Four .875” flattened and silicone sealed knockouts for wiring.
5.75"
Grid Installation: Suitable for 1.0 and 1.5” T-bar grid systems. Four .875" flattened and silicone sealed knockouts for wiring.
Listings: UL and CUL Listed for Wet Location. Dust and water resistance rated IP-
65. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities.
Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E. Class 1. Bio Safety Levels 3 & 4. Rated at 1700 PSI Hosedown.
Ordering Information:
FP - /TR - - - - -
FP
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
24.5" x 49.25"
23.9"
24.0"
Series Installation Type Material Size Lamps Voltage
FP F/TR = Flanged
G/TR = Grid
1 = CRS Hsg. & CRS Door
2 = CRS Hsg. & SS Door
(For top and bottm relamp)
120V
347V*
UNV*
2x2
2x4
= 2'x2’ Housing
= 2'x4’ Housing
2, 3, 4 or 6/T8 = F17T8 17W T8 (G13)
1 or 2/T8U6 = F32T8/U/6 (6” U-Lamp, G13)
2 or 3/T8U1 = F31T8/U (1.625” U-Lamp, G13)
2, 3 or 4/BX = 40-Watt Biax (2G11)
2, 3 or 4/T5 = F14WT5 14W T5 (G5)
2, 3, 4 or 6/T5HO = F24WT5 24W T5HO (G5) †
2, 3, 4 or 6/T8 = F32T8 32W T8 (G13)
2, 3 or 4/T5 = F28WT5 28W T5 (G5)
2, 3, 4 or 6/T5HO = F54WT5 54W T5HO (G5)
Options
FF = Fuse & Holder
FD = Double Fuse & Holders
2/EB = Two Ballasts, (Two Circuits)
EBL = -20°F Electronic Ballast
EBPRS = Program Rapid Start Ballast
EBDIM = Electronic Dimming Ballast
HLO= High Light Output Ballast*
1/EM = 1 Lamp Battery Pack (700L)
2/EM = 1 or 2 Lamp Battery Pack (1400L)*
GG = N.S.F. Listed Gasketing
TP = Stainless Steel Tamperproof Fasteners
WHT = White Finished Stainless Steel
Standard
WET LOCATION
NSF
ISO
3
ISO 14644-1
CLASS 6
ISO 14644-1
CLASS 3
1
FED STD 209E
CLASS 1
C-2 FOOD ZONE
Bio-Safety
BSL
3 & 4
IP
66
IEC 60529
Kurtzon Lighting / Innovtors in Lighting Since 1898
* Note: Not all options are compatible with every option. Ex:
EBPRS is not Compatible with EBL. Consult factory for multiple options marked "*".
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164
Website - www.kurtzon.com
© 2013
2x2 and 2x4 Luminaires for Flange/Drywall or Grid Installation
Certified for ISO-3, 209E Class 1 Clean Spaces
Fully seam welded housing provides rigidity even with large access window.
Fully NSF gasketed for a sure fixture seal.
A handle and mechanical stop built into top cover prevent fixture damage.
The same great door frame and listings as found on the regular FP series.
Continuous piano hinged top cover easily released for servicing.
Lamps and ballasts may be changed from above or below .
1x4, 2x2 and 2x4 Luminaires for Flange/Drywall, Grid or Surface Installation
Certified for ISO-3, 209E Class 1 Clean Spaces
Continuously maintains seal pressure.
Smooth washable surfaces.
NSF listings for Food
Zone standard.
Optional stainless steel available for highly corrosive environments.
Great for BSL-3 and 4 spaces.
No tools needed for servicing.
No screws to loose or be left untightened.
23000 Lumen Output Replaces HID systems while saving up to half the energy.
Latches: Four (4) stainless steel rotary cam latches secure housing to base creating a tight seal.
Heat Sink: Large extruded aluminum fins remove heat from fixture.
Top Cover: Removable for servicing
Efficient: 99 lumens per watt and fully dimmable and programmable drivers. More than 23000 delivered lumens. LM-79 certified tests.
Installation: Designed specifically for 4 inch IMP walkable ceilings common among refrigerated facilities. Designed to reduce labor and increase safety.
Driver(s): Programmable and dimmable (0-10V) provides the highest energy savings. Standard
Factory 5 year warranty from Philips Advance.
LEDs: Four (4) 6000 lumen arrays paired with thermal feedback controls provide assurance of long life and high performance while using only
231 watts.
High Performance : More than 23000 delivered lumens. LM-79 certified tests.
Healthcare Facilities
Brochure
Hazardous Locations & Lighting Applications include:
Vol. II
Quality Since 1898
1
Quality Since 1898
Daylight Series / Round Domes
Kurtzon Lighting www.Kurtzon.com
Quality Since 1898 www.Kurtzon.com
Indoor Sports Lighting
Innovators in
Lighting Since 1898 www.Kurtzon.com
Receive your copy of any of these brochures from your local sales representative or call the number below.
Chicago, IL 60608
1.800.837.8937
www.kurtzon.com
©1/2013