ADEO
T5
Architectural Recessed Luminaire
2X2 SHALLOW
Project Name
Date
Catalog Number
Type
CONSTRUCTION Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector.
Wiring access available on top of housing.
OPTICS Captive and hinged center satine curved, co-extruded acrylic lens with ribbed side channels evenly illuminates
the side reflector giving the appearance of a fully lensed luminaire.
ELECTRICAL T5: Program start 120/277 volt integral electronic ballast with less than 10% THD. Standard single
circuit. Each ballast provided with disconnects to meet luminaire disconnect code requirement.
MOUNTING Designed to install into acoustical grid and inaccessible ceilings. Specify G1, G9 or GS for acoustical grid
ceiling. Specify FL or S for inaccessible ceilings. Grid retention clips integral to housing. Consult factory for detailed
installation instructions.
FINISH Powder-coat white painted finish on exposed trim.
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
Side View
YEAR
WARRANTY
1-3/4”
1-3/4”
24"
24"
LFL
YEAR
WARRANTY
LFL
Convertible
LED
Satine Lens (A)
Baffle (B)
Baffle with
Satine Lens (BF) Linear Slot (L)
LAMP OPTIONS
Convertible
LFL
LED
Convertible
LFL
Round Perf (R)
YEAR
Sample
Catalog #: AS22A-2T5-G1-120-1C-W
WARRANTY
___-
AS22__-
2T5-
1 T5 / T5HO
HOUSING
LAMPS
MOUNTING
___-
__-
2 T5 / T5HO
3 T5 / T5HO
VOLTAGE
CIRCUITING
Adeo 2x4 (AD24)
2T5- (2) 14W T5
Side View
LED
Convertible
Convertible
Acoustical
Grid Ceiling
LED
LFL
G1- 1” Ceiling Grid
48"
G9- 9/16” Ceiling Grid
GS- Screw Slot Ceiling Grid
Inaccessible Ceiling
LAMP OPTIONS
FL- Standard Flange
(Separate Flange Kit)
1 T5 / T5HO
LFL
W-
Convertible
FINISHLED
LED
____
Convertible
LFL
OPTIONS
Adeo Shallow 2x4 (AS24)
120- 120 V
277- 277 V
1
24" 347- 347 V2
UNV- UNV
(120/277)
YEAR
WARRANTY
LFL
Convertible
LED
L U M I N A I R E S P E C I F I C AT I O N
AS22A- Adeo
Shallow 2X2
Recessed with
Satine Lens
AS22R- Adeo
Shallow 2X2
Recessed with
Round Perf
AS22L- Adeo
Shallow 2X2
Recessed with
Linear Slot
AS22B- Adeo
Shallow 2X2
Recessed with
internal Baffle
AS22BF- Adeo
Shallow 2X2
Recessed Satine
Lens, internal Baffle
LED
2 T5 / T5HO
Adeo 1x4 (AD14)
2-7/8”
1-3/4”
W- Matte
White
24"
Side View
1C- Single Circuit,
2-7/8”Normal 1-3/4” QS- Quick Ship2
1D- Single Circuit Dimming5
TW- Through-Wired3
48"
1E- Single Circuit with
SW- Step Switching5
5
Emergency Circuit
DSM- Daylight Sensor Master - Sensor
Included4,5
DSS- Daylight Sensor Satellite - Sensor
Not Included4,5
GLR- Internal Fast-Blow Fuse
AR- Air Return
3 T5 / T5HO
CP- Chicago Plenum
FW6- 6’, 18-gauge, Flex Whip
FW12-12’,1x4
18-gauge,
Adeo Shallow
(AS14)Flex Whip
AM- Antimicrobial Paint
2-7/8”
1-3/4”
12"
12"
Side View
Side View
2-7/8”
1-3/4”
48"
48"
1Consult factory for 347 volt ballast. 2Quick Ship includes universal voltage, G1, G9, or GS mounting only, white finish, Chicago Plenum, single (1C) circuit. 3Individual fixtures are through-wired for
LAMP
OPTIONS
continuous pattern. Fixtures cannot be joined. 4See back page
for ordering
information. Requires 0-10 volt dimming. 5Some Adeo configurations will not accommodate all options. Consult factory.
1 T5 / T5HO
®
2 T5 / T5HO
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting® December 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
ADEO Shallow 2x2
667
814
737
445
500
610
553
334
333
407
368
223
167
203
184
111
Test #: 203589
Part #: AS22A-2T5
Total Luminaire Efficiency: 90.0%
Test #: 203595
Part #: AS22B-2T5
Total Luminaire Efficiency: 87.5%
M O U N T I N G D E TA I L
G1 (1”Ceiling Grid) Mounting Options
1” Ceiling Grid with
Standard Tile
1” Ceiling Grid with
Tegular Tile
Test #: 203698
Part #: AS22BF-2T5
Total Luminaire Efficiency: 84.5%
G9 (9/16”Ceiling Grid) Mounting Options
9/16” Ceiling Grid with
Standard Tile
9/16” Ceiling Grid
with Tegular Tile
APPLICATION: Daylight sensor is a turn key solution for lighting control. Integral
sensor is wired to the 0-10 volt dimming ballast at the factory. No additional wiring is
required by the contractor.
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and presence
of daylight. Sensor can control up to 20 dimming ballasts. Sensor is factory calibrated
to 45 footcandles (fc), adjustable by 1/3 to 3 times the default setting by rotating the
aperture.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section of
the part number when ordering Integral Daylight Sensor. Daylight Sensor Master (DSM)
includes the fixture with sensor and dimming ballast. Controls DSS units. Daylight
Sensor Satellite (DSS) includes the fixture with a sensor compatible dimming ballast
only. Must be used in conjunction with a DSM unit. (0-10v) dimming must be utilized.
(Sample Catalog #: AS22A-2T5-G1-120-1C-W-DSM)
Screw Slot Ceiling Grid
9/16” Ceiling Grid with
Tegular Tile (fixture flush
with tile)
APPLICATION: Air Return is an alternative method
for allowing air to access the plenum. Optional Air
Return slots are located on side panels. Slots are
evenly spaced for most efficient air flow into plenum with minimal distraction
to fixture appearance.
TECHNICAL: Air Return component is integral to the fixture housing. Made
of 20 gauge cold rolled steel painted. Slot size is .50” x .06” and spaced .12”
apart from each other.
ORDERING INFORMATION: Specify Air Return in the options section of
the part number. (Sample Catalog #: AS22A-2T5-G1-120-1C-W-AR)
LAMP AND BALLAST MAINTENANCE
REMOVING BALLAST SCREWS:
Remove (2) screws holding the ballast tray. Be sure to hold tray while
removing the screws.
OPENING THE LENS: Locate notch on the
fixture endcap. Pull down on the notched
side to release the lens. Lens swings open.
(2) #8-32
Screws
Lamps
Notched endcap
Captive Lens
®
GS (Screw Slot Grid) Mounting Options
AIR RETURN
INTEGRAL DAYLIGHT SENSOR
ACCESSING THE LAMPS:
Lamps are accessible once lens
is open. Lens remains captive
to fixture housing during lamp
maintenance.
Test #: 203601
Part #: AS22R-2T5 and AS22L-2T5
Total Luminaire Efficiency: 64.1%
REMOVING BALLAST
TRAY: Gently pull on
socket and ballast
tray will release from
housing. Ballast is fully
accessible.
Ballast Tray
Ballast
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting® December 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.