ADEO 2X4
Adeo 2x2 (AD22)
LED
Architectural Recessed Luminaire
Installation
Instructions
Year LED
Warranty
LFL
Convertible
LED
Project Name
Date
Catalog Number
Type
CONSTRUCTION Formed 20 gauge cold rolled steel housing. Highly
reflective die-formed white painted reflector.
Side View
Wiring access available on top of housing.
3”
OPTICS Captive and hinged center satine curved, co-extruded
acrylic lens with ribbed side channels evenly illuminates
3”
the side reflector giving the appearance of a fully(76.2mm)
lensed luminaire.
(76.2mm)
ELECTRICAL Electronic,
120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
24" (609.6mm)
24" (609.6mm)
for dimming.
Staggered
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
Lamps
R9≥19, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000 hours.
MOUNTING Designed to install into acoustical grid and inaccessible ceilings. Specify G1, G9 or GS for acoustical
grid ceiling. Specify FL for inaccessible ceilings. Grid retention clips integral to housing. Consult factory for detailed
installation instructions.
Staggered
FINISH Powder-coat white painted finish on exposed trim.
Lamps
WARRANTY Adeo LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS UL and cUL Listed, LO, MO, and HO lumen packages are IC Rated, approved for dry/damp location unless
otherwise noted.
YEAR
WARRANTY
Adeo 2x4 (AD24)
LED
Convertible
LFL
Side View
Convertible
LED
3”
(76.2mm)
YEAR
WARRANTY
LFL
LFL
24" (609.6mm)
Convertible
AD24A- Adeo 2X4
Recessed with
Satine Lens
3”
(76.2mm)
48" (1219.2mm)
LED
LFL
L U M I N A I R E S P E C I F I C AT I O N
HOUSING
LFL
Convertible
LED
AD24A-
LED
Convertible
Sample Catalog #: AD24A-40LO-G1-120-1C-W
____-
__-
___-
__-
W-
___
COLOR/LUMENS
MOUNTING
VOLTAGE
CIRCUITING
FINISH
OPTIONS
Adeo 1x4 (AD14)
YEAR
WARRANTY
120- 120 V
277- 277 V
347- 347 V
UNV- UNV
3”
(120-277)
(76.2mm)
Acoustical 12"
Grid
Ceiling
30K Color Temperature Lumen Options
(304.8mm)
LFL
LED
30LO- 30K, 3,052 lumens (33.6 watts)
G1- 1” (25.4mm)Convertible
Ceiling Grid
Convertible
LED (14.3mm) Ceiling
LFLGrid
30MO- 30K, 3,659 lumens (40.8 watts)
G9- 9/16”
30HO- 30K, 5,025 lumens (47.0 watts)
GS- Screw Slot Ceiling Grid
30VHO- 30K, 7,282 lumens (73.4 watts)
Inaccessible Ceiling
35K Color Temperature Lumen Options
FL- Standard Flange
35LO- 35K, 3,205 lumens (33.6 watts)
(Separate Flange Kit)
35MO- 35K, 3,843 lumens (40.8 watts)
35HO- 35K, 5,180 lumens (47.0 watts)
35VHO- 35K, 7,507 lumens (73.4 watts)
40K Color Temperature Lumen Options
40LO- 40K, 3,286 lumens (33.6 watts)
40MO- 40K, 3,940 lumens (40.8 watts)
40HO- 40K, 5,300 lumens (47.0 watts)
40VHO- 40K, 7,680 lumens (73.4 watts)
Custom Output
CL______- Specify color temp. and desired lumens. (i.e. CL356500)
CW____- Specify color temp. and desired wattage. (i.e. CW4065)
W- Matte
White
Side View
1C- Single Circuit, Normal
48" (1219.2mm)
1D- Single Circuit Dimming3
1B- Single Circuit with a
Battery Pack3
1E- Single Circuit with
Emergency Circuit3
QSTWARCPFW6FW12AMDSM-
3”
(76.2mm)
Quick Ship4
Through-Wired1
Air Return
Chicago Plenum
6’, 18-gauge, Flex Whip
12’, 18-gauge, Flex Whip
Antimicrobial Paint
Daylight Sensor Master
(sensor included)2
DSS- Daylight Sensor Satellite
(sensor not included)2
(Specify lumens/watts between standard offering listed above.
Lumens are specified per color temp.)
1
Individual fixtures are through-wired for continuous pattern. Fixtures cannot be joined. 2See back page for ordering information. Requires 0-10 volt dimming. Must specify 1D in circuiting.
configurations will not accommodate all options. Consult factory. 4Quick Ship includes universal voltage, G1, G9, or GS mounting only, white finish, Chicago Plenum, and single circuit (1C).
3
Some Adeo
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
ADEO 2x4 LED
1095
1767
2562
821
1325
1922
548
884
1281
274
442
641
Test #: ILT85407
Part #: AD24A-35LO
Lumens per watt: 95
Total Delivered Lumens: 3205
Test #: ILT85408
Part #: AD24A-35HO
Lumens per watt: 110
Total Delivered Lumens: 5180
Test #: ILT85409
Part #: AD24A-35VHO
Lumens per watt: 102
Total Delivered Lumens: 7507
M O U N T I N G D E TA I L
G1 (1”Ceiling Grid) Mounting Options
1” Ceiling Grid with
Standard Tile
1” Ceiling Grid with
Tegular Tile
G9 (9/16”Ceiling Grid) Mounting Options
9/16” Ceiling Grid with
Standard Tile
INTEGRAL DAYLIGHT SENSOR
APPLICATION: Daylight sensor is a turn key solution for lighting control. Integral
sensor is wired to the 0-10 volt dimming driver at the factory. No additional wiring is
required by the contractor.
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and presence
of daylight. Sensor can control up to 20 drivers. Sensor is factory calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the default setting by rotating the aperture.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section
of the part number when ordering Integral Daylight Sensor. Daylight Sensor Master
(DSM) includes the fixture with sensor and driver. Controls DSS units. Daylight Sensor
Satellite (DSS) includes the fixture with a sensor compatible driver only. Must be used
in conjunction with a DSM unit. (0-10v) dimming must be utilized. (Sample Catalog #:
AD24A-35MO-G1-120-1D-W-DSM)
9/16” Ceiling Grid
with Tegular Tile
GS (Screw Slot Grid) Mounting Options
Screw Slot Ceiling Grid
9/16” Ceiling Grid with
Tegular Tile (fixture flush
with tile)
AIR RETURN
APPLICATION: Air Return is an alternative method
for allowing air to access the plenum. Optional Air
Return slots are located on side panels. Slots are
evenly spaced for most efficient air flow into plenum with minimal distraction
to fixture appearance.
TECHNICAL: Air Return component is integral to the fixture housing. Made
of 20 gauge cold rolled steel painted. Slot size is .50” x .06” and spaced .12”
apart from each other.
ORDERING INFORMATION: Specify Air Return in the options section of
the part number. (Sample Catalog #: AD24A-35MO-G1-120-1C-W-AR)
OPENING THE LENS
OPENING THE LENS: Locate notch on the fixture
endcap. Pull down on the notched side to release
the lens. Lens swings open.
(2) #8-32
Screws
Lamps
Notched endcap
Captive Lens
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
Ballast Tray
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
Ballast
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Side View
24"
ADEO 2X4
4-3/8”
Side View
Project Name
4-3/8”
T8
Architectural Recessed Luminaire
2”
24"
LAMP
OPTIONS
2”
24"
1, 2 Biax
Catalog Number
Date
1, 2, 3 T8
Type
CONSTRUCTION Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector.
LAMP Wiring
OPTIONS
access available on top of housing.
1, 2 Biax
1, 2, 3 T8
OPTICS Captive and hinged center satine curved, co-extruded acrylic lens with ribbed side channels evenly illuminates
the side reflector giving the appearance of a fully lensed luminaire.
ELECTRICAL Instant start 120/277V electronic ballast with less than 10% THD. Standard single circuit. Each ballast
provided with disconnects to meet luminaire disconnect code requirement.
MOUNTING Designed to install into acoustical grid and inaccessible ceilings. Specify G1, G9 or GS for acoustical grid
ceiling. Specify FL or S for inaccessible ceilings. Grid retention clips integral to housing. Consult factory for detailed
installation instructions.
Adeo 2x4 (AD24)
FINISH Powder-coat white painted finish on exposed trim.
Side View
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
4-3/8”
Adeo 2x4 (AD24)
Side View
4-3/8”
24"
LFL
YEAR
WARRANTY
LFL
Satine Lens (A)
Baffle (B)
L U M I N A I R E S P E C I F I C AT I O N
Linear Slot (L)
LFL
LAMP OPTIONS
LFL
1 T8
LAMP OPTIONS
Baffle with
Satine Lens (BF)
2 T8
2 T8
3 T8
Sample Catalog #: AD24A-2T8-G1-120-1C-W
LFL
AD24__-
___-
__-
___-
HOUSING
LAMPS
MOUNTING
VOLTAGE
3 T8
YEAR
WARRANTY
Round Perf (R)
1 T8
48"
Convertible
LED
Convertible
LED
4-3/8”
2”
LED
Convertible
LED
Convertible
24"
YEAR
WARRANTY
Convertible
__-
Adeo 1x4 (AD14)
CIRCUITING
W-
LED
FINISH
LED
Convertible
___
LFL
OPTIONS
4-3/8”
AD24A- Adeo 2X4
Recessed with
Satine Lens
AD24R- Adeo 2X4
Recessed with
Round Perf
AD24L- Adeo 2X4
Recessed with
Linear Slot
AD24B- Adeo 2X4
Recessed with
internal Baffle
AD24BF- Adeo
2X4 Recessed
Satine Lens with
internal Baffle
YEAR
WARRANTY
Adeo 1x4 (AD14)
1T8- (1) 32W T8
2T8- (2) 32W T8
3T8- (3) 32W T8
LFL
Convertible
LED
120- 120 V
277- 277 V
347- 347 V1
4-3/8”
2
UNV- UNV (120/277)
Convertible
12"
Acoustical
G1- 1” Ceiling
SideGrid
View
G9- 9/16” Ceiling Grid
GS-4-3/8”
Screw Slot Ceiling Grid
Inaccessible Ceiling
FL- Standard Flange
(Separate Flange Kit)
S- Surface
Mount
LAMP
OPTIONS
LEDCeiling
Grid
LFL
48"
(See surface mount specification
sheet for dimensions)
1 T8
2 T8
12" W- Matte
White
Side View
4-3/8”
1C- Single Circuit, Normal
2C- Dual Circuit, Normal3
1D- Single Circuit Dimming8
2D- Dual Circuit Dimming3,8
OPTIONS
1E- SingleLAMP
Circuit2”with
Emergency Circuit4,8
1B- Single Circuit with a
1 T8
Battery Pack4,8
2B- Dual Circuit with a
Battery Pack3,4,8
QS- Quick Ship5
48" TW- Through-Wired6
SW- Step Switching8
2”
DSM- Daylight Sensor Master Sensor Included7,8
DSS- Daylight Sensor Satellite Sensor Not Included7,8
2 T8
GLR- Internal Fast-Blow Fuse
AR- Air Return
CP- Chicago Plenum
FW6- 6’, 18-gauge, Flex Whip
FW12-12’, 18-gauge, Flex Whip
AM- Antimicrobial Paint
1Consult factory for 347 volt ballast. 2Not available for use with a battery pack. 3Dual circuit available for 2 (side-by-side) and 3 (inboard/outboard) lamp configurations. 4Emergency circuit or battery
pack to be on center lamp with 3 lamp configurations. 5Quick Ship includes universal voltage, G1, G9, or GS mounting only, white finish, Chicago Plenum, single (1C) and dual circuit (2C). 6Individual
fixtures are through-wired for continuous pattern. Fixtures cannot be joined. 7See back page for ordering information. Requires 0-10 volt dimming. 8Some Adeo configurations will not accommodate all
options. Consult factory.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting® December 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
ADEO 2x4 (T8)
1598
1823
1674
1006
1199
1367
1254
754
799
911
836
503
400
456
418
251
Test #: 203624
Part #: AD24A-2T8
Total Luminaire Efficiency: 85.4%
Test #: 203632
Part #: AD24B-2T8
Total Luminaire Efficiency: 84.1%
Test #: 203689
Part #: AD24BF-2T8
Total Luminaire Efficiency: 80.2%
Test #: 203640
Part #: AD24R-2T8 and AD24L-2T8
Total Luminaire Efficiency: 58.1%
M O U N T I N G D E TA I L
G1 (1”Ceiling Grid) Mounting Options
1” Ceiling Grid with
Standard Tile
1” Ceiling Grid with
Tegular Tile
G9 (9/16”Ceiling Grid) Mounting Options
9/16” Ceiling Grid with
Standard Tile
INTEGRAL DAYLIGHT SENSOR
APPLICATION: Daylight sensor is a turn key solution for lighting control. Integral
sensor is wired to the 0-10 volt dimming ballast at the factory. No additional wiring is
required by the contractor.
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and presence
of daylight. Sensor can control up to 20 dimming ballasts. Sensor is factory calibrated
to 45 footcandles (fc), adjustable by 1/3 to 3 times the default setting by rotating the
aperture.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section of
the part number when ordering Integral Daylight Sensor. Daylight Sensor Master (DSM)
includes the fixture with sensor and dimming ballast. Controls DSS units. Daylight
Sensor Satellite (DSS) includes the fixture with a sensor compatible dimming ballast
only. Must be used in conjunction with a DSM unit. (0-10v) dimming must be utilized.
(Sample Catalog #: AD24A-1T8-G1-120-1C-W-DSM)
9/16” Ceiling Grid
with Tegular Tile
GS (Screw Slot Grid) Mounting Options
Screw Slot Ceiling Grid
9/16” Ceiling Grid with
Tegular Tile (fixture flush
with tile)
AIR RETURN
APPLICATION: Air Return is an alternative method
for allowing air to access the plenum. Optional Air
Return slots are located on side panels. Slots are
evenly spaced for most efficient air flow into plenum with minimal distraction
to fixture appearance.
TECHNICAL: Air Return component is integral to the fixture housing. Made
of 20 gauge cold rolled steel painted. Slot size is .50” x .06” and spaced .12”
apart from each other.
ORDERING INFORMATION: Specify Air Return in the options section of
the part number. (Sample Catalog #: AD24A-1T8-G1-120-1C-W-AR)
LAMP AND BALLAST MAINTENANCE
(2) #8-32
Screws
OPENING THE LENS: Locate notch on the
fixture endcap. Pull down on the notched
side to release the lens. Lens swings open.
Lamps
REMOVING BALLAST SCREWS:
Remove (2) screws holding the ballast tray. Be sure to hold tray while
removing the screws.
Notched endcap
ACCESSING THE LAMPS:
Lamps are accessible once
lens is open. Lens remains
captive to fixture housing
during lamp maintenance.
®
Captive Lens
REMOVING BALLAST
TRAY: Gently pull on
socket and ballast
tray will release from
housing. Ballast is fully
accessible.
Ballast Tray
Ballast
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting® December 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
ADEO 2X2
LED
Architectural Recessed Luminaire
Installation
Instructions
Year LED
Warranty
LFL
Project Name
Date
Catalog Number
Type
CONSTRUCTION Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector.
Wiring access available on top of housing.
OPTICS Captive and hinged center satine curved, co-extruded acrylic lens with ribbed side channels evenly illuminates
the side reflector giving the appearance of a fully lensed luminaire.
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
for dimming.
Staggered
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
Lamps
R9≥19, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000 hours.
MOUNTING Designed to install into acoustical grid and inaccessible ceilings. Specify G1, G9 or GS for acoustical
grid ceiling. Specify FL for inaccessible ceilings. Grid retention clips integral to housing. Consult factory for detailed
installation instructions.
Staggered
FINISH Powder-coat white painted finish on exposed trim.
Lamps
WARRANTY Adeo LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS UL and cUL Listed, LO, MO, and HO lumen packages are IC Rated, approved for dry/damp location unless
otherwise noted.
YEAR
WARRANTY
Adeo 2x2 (AD22)
LED
Convertible
Convertible
LED
Side View LED
Convertible
LFL
YEAR
WARRANTY
LFL
3” Convertible
LED
(76.2mm)
24" (609.6mm)
LFL
24" (609.6mm)
LED
Convertible
Convertible
LED
LFL
L U M I N A I R E S P E C I F I C AT I O N
AD22AHOUSING
3”
(76.2mm)
LFL
Sample Catalog #: AD22A-35MO-G1-120-1C-W
____-
__-
___-
__-
W-
____
COLOR/LUMENS
MOUNTING
VOLTAGE
CIRCUITING
FINISH
OPTIONS
Adeo 2x4 (AD24)
AD22A- Adeo 2X2
Recessed with
Satine Lens
30K Color Temperature Lumen Options
30LO- 30K, 2,264 lumens (22.7 watts)
30MO- 30K, 3,538 lumens (36.0 watts)
30HO- 30K, 4,539 lumens (49.2 watts)
35K Color Temperature Lumen Options
35LO- 35K, 2,333 lumens (22.7 watts)
35MO- 35K, 3,647 lumens (36.0 watts)
35HO- 35K, 4,679 lumens (49.2 watts)
40K Color Temperature Lumen Options
40LO- 40K, 2,387 lumens (22.7 watts)
40MO- 40K, 3,731 lumens (36.0 watts)
40HO- 40K, 4,787 lumens (49.2 watts)
120277347UNV-
YEAR
WARRANTY
LFL
Convertible
LED
LED
24" (609.6mm)
Convertible
120 V
277 V
347 V
UNV
Side View
(120-277)
3”
(76.2mm)
3”
(76.2mm)
48" (1219.2mm)
LFL
Acoustical Grid Ceiling
G1- 1” (25.4mm) Ceiling Grid
G9- 9/16” (14.3mm) Ceiling Grid
GS- Screw Slot Ceiling Grid
Inaccessible Ceiling
FL- Standard Flange
(Separate Flange Kit)
W- Matte
White
1C- Single Circuit, Normal
1D- Single Circuit Dimming3
1B- Single Circuit with a
Battery Pack3
1E- Single Circuit with
Emergency Circuit3
Adeo 1x4 (AD14)
QS- Quick Ship4
TW- Through-Wired1
AR- Air Return
CP- Chicago Plenum
FW6- 6’, 18-gauge, Flex Whip
FW12- 12’, 18-gauge, Flex Whip
AM- Antimicrobial Paint
DSM- Daylight Sensor Master
(sensor included)2
DSS- Daylight Sensor Satellite
Custom Output
CL______- Specify color temp. and desired lumens. (i.e. CL354000)
CW____- Specify color temp. and desired wattage. (i.e. CW4040)
(sensor not included)2
Side View
3”
(76.2mm)
(Specify lumens/watts between standard offering listed above.
Lumens are specified per color temp.)
12" (304.8mm)
3”
(76.2mm)
48" (1219.2mm)
1
Individual fixtures are through-wired for continuous pattern. Fixtures cannot be joined. 2See back page for ordering information. Requires 0-10 volt dimming. Must specify 1D in circuiting.
configurations will not accommodate all options. Consult factory. 4Quick Ship includes universal voltage, G1, G9, or GS mounting only, white finish, Chicago Plenum, and single circuit (1C).
3
Some Adeo
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
ADEO 2x2 LED
791
1228
1577
593
921
1188
396
614
788
198
307
394
Test #: ILT85401
Part #: AD22A-35LO
Lumens per watt: 103
Total Delivered Lumens: 2333
Test #: ILT85402
Part #: AD22A-35MO
Lumens per watt: 101
Total Delivered Lumens: 3647
Test #: ILT85403
Part #: AD22A-35HO
Lumens per watt: 95
Total Delivered Lumens: 4679
M O U N T I N G D E TA I L
G1 (1”Ceiling Grid) Mounting Options
1” Ceiling Grid with
Standard Tile
1” Ceiling Grid with
Tegular Tile
G9 (9/16”Ceiling Grid) Mounting Options
9/16” Ceiling Grid with
Standard Tile
INTEGRAL DAYLIGHT SENSOR
APPLICATION: Daylight sensor is a turn key solution for lighting control. Integral
sensor is wired to the 0-10 volt dimming driver at the factory. No additional wiring is
required by the contractor.
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and presence
of daylight. Sensor can control up to 20 drivers. Sensor is factory calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the default setting by rotating the aperture.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section
of the part number when ordering Integral Daylight Sensor. Daylight Sensor Master
(DSM) includes the fixture with sensor and driver. Controls DSS units. Daylight Sensor
Satellite (DSS) includes the fixture with a sensor compatible driver only. Must be used
in conjunction with a DSM unit. (0-10v) dimming must be utilized. (Sample Catalog #:
AD22A-35MO-G1-120-1D-W-DSM)
9/16” Ceiling Grid
with Tegular Tile
GS (Screw Slot Grid) Mounting Options
Screw Slot Ceiling Grid
9/16” Ceiling Grid with
Tegular Tile (fixture flush
with tile)
AIR RETURN
APPLICATION: Air Return is an alternative method
for allowing air to access the plenum. Optional Air
Return slots are located on side panels. Slots are
evenly spaced for most efficient air flow into plenum with minimal distraction
to fixture appearance.
TECHNICAL: Air Return component is integral to the fixture housing. Made
of 20 gauge cold rolled steel painted. Slot size is .50” x .06” and spaced .12”
apart from each other.
ORDERING INFORMATION: Specify Air Return in the options section of
the part number. (Sample Catalog #: AD22A-35MO-G1-120-1C-W-AR)
OPENING THE LENS
OPENING THE LENS: Locate notch on the fixture
endcap. Pull down on the notched side to release
the lens. Lens swings open.
(2) #8-32
Screws
Lamps
Notched endcap
Captive Lens
TrayEast 42nd Avenue, Suite 50 Denver, CO
Pinnacle Architectural LightingBallast
12655
Ballast
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
ADEO 2X2
T8 and Biax
Architectural Recessed Luminaire
Project Name
Date
Catalog Number
Type
CONSTRUCTION Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector.
Wiring access available on top of housing.
OPTICS Captive and hinged center satine curved, co-extruded acrylic lens with ribbed side channels evenly illuminates
the side reflector giving the appearance of a fully lensed luminaire.
ELECTRICAL Standard 55W Biax: Program start 120/277 volt integral electronic ballast with less than 15% THD. T8:
Instant start 120/277V electronic ballast with less than 10% THD. Standard single circuit. Each ballast provided with
disconnects to meet luminaire disconnect code requirement.
AdeoMOUNTING
2x2 (AD22)Designed to install into acoustical grid and inaccessible ceilings. Specify G1, G9 or GS for acoustical
grid ceiling. Specify FL or S for inaccessible ceilings. Seismic clips integral to housing. Consult factory for detailed
Adeo 2x2 (AD22)
installation instructions.
FINISH Powder-coat white painted finish on exposed trim.
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
YEAR
WARRANTY
4-3/8”
24"
LAMP OPTIONS
LFL
4-3/8”
LFL
YEAR
WARRANTY
Side View
Convertible
LED
2”
24"
24"
LED
Convertible
LFL
LAMP OPTIONS
1, 2 Biax
LED
1, 2, 3 T8
1, 2 Biax Convertible 1, 2, 3 Convertible
T8
LED
Satine Lens (A)
Baffle (B)
Baffle with
Satine Lens (BF)
Linear Slot (L)
LFL
Round Perf (R)
YEAR
WARRANTY
L U M I N A I R E S P E C I F I C AT I O N
Sample Catalog #: AD22A-2T8-G1-120-1C-W
AD22__-
____-
__-
___-
__-
Convertible
HOUSING
LAMPS
MOUNTING
VOLTAGE
CIRCUITING
FINISH
AD22A- Adeo 2X2
Recessed with
Satine Lens
AD22R- Adeo 2X2
Recessed with
Round Perf
AD22L- Adeo 2X2
Recessed with
Linear Slot
AD22B- Adeo 2X2
Recessed with
internal Baffle
AD22BF- Adeo
2X2 Recessed
Satine Lens with
internal Baffle
1BX551T82T83T8-
(1) 55W Biax
(1) 17W T8
(2) 17W T8
(3) 17W T8
120- 120 V
277- 277 V
347- 347 V1
2
UNV- UNV
YEAR
WARRANTY
LFL
Convertible
LED
Convertible
Acoustical Grid Ceiling
G1- 1” Ceiling Grid
G9- 9/16” Ceiling Grid
GS- Screw Slot Ceiling Grid
Inaccessible Ceiling
FL- Standard Flange
(Separate Flange Kit)
S- Surface Mount
(See surface mount specification
sheet for dimensions)
W-
LED
LED
____
Convertible
LFL
OPTIONS
W- Matte
White
(120-277)
LED
LFL
LFL
1C- Single Circuit, Normal
2C- Dual Circuit, Normal3
1D- Single Circuit Dimming8
2D- Dual Circuit Dimming3,8
1E- Single Circuit with
Emergency Circuit4,8
1B- Single Circuit with a
Battery Pack4,8
2B- Dual Circuit with a
Battery Pack3,4,8
QS- Quick Ship5
TW- Through-Wired6
SW- Step Switching (T8)8
DSM- Daylight Sensor Master - Sensor
Included (T8, 1BX55) 7,8
DSS- Daylight Sensor Satellite - Sensor
Not Included (T8, 1BX55)7,8
GLR- Internal Fast-Blow Fuse
AR- Air Return
CP- Chicago Plenum
FW6- 6’, 18-gauge, Flex Whip
FW12-12’, 18-gauge, Flex Whip
AM- Antimicrobial Paint
1Consult factory for 347 volt ballast. 2Not available for use with a battery pack. 3Dual circuit available for 2 (side-by-side) and 3 (inboard/outboard) lamp configurations. 4Emergency circuit or battery pack
to be on center lamp with 3 lamp configurations. 5Quick Ship includes universal voltage, G1, G9, or GS mounting only, white finish, Chicago Plenum, single (1C) and dual circuit (2C). 6Individual fixtures are
through-wired for continuous pattern. Fixtures cannot be joined. 7See back page for ordering information. Requires 0-10 volt dimming. 8Some Adeo configurations will not accommodate all options. Consult
factory.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting® December 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
ADEO 2x2 (T8, BIAX)
761
856
786
463
571
624
589
347
381
428
393
232
190
214
196
116
Test #: 203621
Part #: AD22A-2T8
Total Luminaire Efficiency: 85.3%
Test #: 203629
Part #: AD22B-2T8
Total Luminaire Efficiency: 83.1%
Test #: 203686
Part #: AD22BF-2T8
Total Luminaire Efficiency: 79.2%
Test #: 203637
Part #: AD22R-2T8 and AD22L-2T8
Total Luminaire Efficiency: 57%
M O U N T I N G D E TA I L
G1 (1”Ceiling Grid) Mounting Options
1” Ceiling Grid with
Standard Tile
1” Ceiling Grid with
Tegular Tile
G9 (9/16”Ceiling Grid) Mounting Options
9/16” Ceiling Grid with
Standard Tile
INTEGRAL DAYLIGHT SENSOR
APPLICATION: Daylight sensor is a turn key solution for lighting control. Integral
sensor is wired to the 0-10 volt dimming ballast at the factory. No additional wiring is
required by the contractor.
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and presence
of daylight. Sensor can control up to 20 dimming ballasts. Sensor is factory calibrated
to 45 footcandles (fc), adjustable by 1/3 to 3 times the default setting by rotating the
aperture.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section of
the part number when ordering Integral Daylight Sensor. Daylight Sensor Master (DSM)
includes the fixture with sensor and dimming ballast. Controls DSS units. Daylight
Sensor Satellite (DSS) includes the fixture with a sensor compatible dimming ballast
only. Must be used in conjunction with a DSM unit. (0-10v) dimming must be utilized.
(Sample Catalog #: AD22A-1T8-G1-120-1C-W-DSM)
9/16” Ceiling Grid
with Tegular Tile
GS (Screw Slot Grid) Mounting Options
Screw Slot Ceiling Grid
9/16” Ceiling Grid with
Tegular Tile (fixture flush
with tile)
AIR RETURN
APPLICATION: Air Return is an alternative method
for allowing air to access the plenum. Optional Air
Return slots are located on side panels. Slots are
evenly spaced for most efficient air flow into plenum with minimal distraction
to fixture appearance.
TECHNICAL: Air Return component is integral to the fixture housing. Made
of 20 gauge cold rolled steel painted. Slot size is .50” x .06” and spaced .12”
apart from each other.
ORDERING INFORMATION: Specify Air Return in the options section of
the part number. (Sample Catalog #: AD22A-1T8-G1-120-1C-W-AR)
LAMP AND BALLAST MAINTENANCE
(2) #8-32
Screws
OPENING THE LENS: Locate notch on the
fixture endcap. Pull down on the notched
side to release the lens. Lens swings open.
Lamps
REMOVING BALLAST SCREWS:
Remove (2) screws holding the ballast tray. Be sure to hold tray while
removing the screws.
Notched endcap
ACCESSING THE LAMPS:
Lamps are accessible once
lens is open. Lens remains
captive to fixture housing
during lamp maintenance.
®
Captive Lens
REMOVING BALLAST
TRAY: Gently pull on
socket and ballast
tray will release from
housing. Ballast is fully
accessible.
Ballast Tray
Ballast
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting® December 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.