Technical Specification Sheet
January, 2002
Systems Integration
APOGEE FLN Integration: Siemens Building
Technologies, Inc. Variable Frequency Drive
Management Network (Facility Campus Ethernet TCP/IP)
Insight
Workstation
MBC
Building Level Network
System 600
APOGEE Automation
C
DO25 NO
NC
C
DO26 NO
NC
C
DO27 NO
NC
C
DO28 NO
NC
C
DO29 NO
NC
C
DO30 NO
NC
C
DO31 NO
NC
C
DO32 NO
NC
9
10 DI5
11
12 DI6
13
14 DI7
15
16 DI8
DI1 12
DI2 34
DI3 56
DI4 78
25 +
17 + AO13 26 18 27 +
19 + AO14 28 AO10 20
29 +
21 + AO15 30 AO11 22
31 +
23 + AO16 32 AO12 24
-
AO9
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
53 + 24 VDC
54
55 SENSOR
56 SUPPLY
49
50
51
52
SHIELD
AI17
AI18
AI19
AI20
33 +
34 35 +
36 37 +
38 39 +
40 -
AI21
AI22
AI23
AI24
41 +
42 43 +
44 45 +
46 47 +
48 STATUS
MODEM
SCU
MBC
BLN
TX
BATT
EXP
TX
BLN
RX
EXP
RX
MEC
Floor Level Network
System 600
RX
TX
1
2
4
5
6
LED 8
7
8
LED 9
LED 6
3
LED 7
LED 5
LED 2 LED 3
TX
LED 4
s
9
I
Hand
Fm
O
Auto
P
10 11 12 13 14 15 16
GW0896R1
SED2
PE
Siemens Building
Technologies
SED 2 Drive
Figure 1. System Architecture.
Siemens Building Technologies, Inc.
Document No. 127-0527
Page 1 of 2
Notes on System Architecture
Benefits
The Siemens Building Technologies SED 2 Series
Variable Frequency Drives (VFD) are connected to the
APOGEE Floor Level Network (FLN) in order to look as
if they were standard APOGEE Floor Level devices (for
example, Terminal Equipment Controller). Siemens
Building Technologies’ FLN protocol is installed on the
VFDs allowing direct communication between the MBC
and the VFDs.
Loading the SED 2 points into APOGEE allows ease of
controlling the VFD without the need to hard wire
physical I/O points. From the Insight Workstation, an
operator can view and change VFD parameters.
Because only one front-end workstation is needed, the
customer saves in equipment purchases. Additional
savings are incurred through reduced maintenance costs
and reduced training needs. Increased employee
productivity and efficiency is also achieved.
Functionality
The Siemens Building Technologies VFD transmits
informational points, control parameters, PI
(Proportional, Integral) parameters, and fault information
to APOGEE. It also allows commanding of certain digital
and analog parameters.
Keys to Success
Your local Siemens Building Technologies branch
representative should be sure that the Siemens FLN
protocol option is ordered and installed in the VFD. In
order to minimize troubleshooting, the VFD should be
commissioned prior to start up of the communications.
Products Supported
Siemens Building Technologies Variable Frequency
Drive Models supported with the FLN interface include:
•
SED 2 with FLN Protocol Option
If there are any questions regarding the Siemens
Building Technologies VFD, contact your local Siemens
Building Technologies branch representative.
For more information, visit www.sbt.siemens.com.
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design
improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners.
© 2002 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Printed in the U.S.A.
Document No. 127-0527
Page 2 of 2