www.weg.net
CFW11
CFW11
Drive
Data is subject to change without notice.
APG2010.indd 41
WEG Automation - Products and Solutions
A-41
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
WEG is launching a new generation of inverters with state-of-the-art
technology for three-phase induction motor control. Aimed at
increasing the productivity for its customers, this new line offers the
following innovations:
g
g
g
CFW11
g
g
g
g
g
g
g
g
g
g
lug and play philosophy (connect and use) enables quick and
P
easy installation of accessories and options.
USB for microcomputer connection for using SUPERDRIVE
programming and monitoring software as well as updating inverter
firmware.
Human-Machine Interface (HMI) with backlit graphic display and softkeys, greatly facilitates inverter programming and operation.
DC link inductors (symetrically connected to positive and negative
DC link terminals) enable compliance with IEC61000-3-12 standard
requirements regarding harmonics, (no need for external line reactance)
Intelligent thermal management enables full protection of IGBTs,
monitoring of heatsink and internal air temperature.
Automatic control of the heatsink fan with speed sensor (additional
protection) and easily detachable from the unit for cleaning and
maintenance.
Normal Duty and Heavy Duty ratings to adapt optimally to all kinds
of loads.
Protection with failure and alarm warnings.
Motor overload protection in compliance with IEC 60947-4-2/UL 508 C.
Memory card built into the standard product allows user to create
functions without the need to use an external PLC (soft-PLC via
IEC61131-3 programming software)
Guided start-up simplifies initial user programming.
Real time clock
TRACE / SCOPE function to assist with the start-up and system
diagnostics.
Mounting Options
A-42
APG2010.indd 42
1-800-ASK-4WEG
Data is subject to change without notice.
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
Plug and Play
The CFW11 frequency inverter incorporates Plug and Play technology automatically
recognizing and configuring accessories and options used, enabling easy installation and
safe operation while eliminating manual configuration.
Accessories
Description
Slot
IOA-01
14-bit analog input; 2 digital inputs; 2 14-bit analog outputs in voltage and current;
2 open collector type digital outputs
1
IOB-01
2 isolated analog inputs; 2 digital inputs; 2 analog isolated outputs in voltage and current;
2 open collector type digital outputs
1
IOC-01 (*)
8 digital inputs and outputs
1
IOD-01 (*)
8 - 120VAC - digital inputs
1
IOE-01 (*)
6 - PT100 or KTY 84 - thermistor inputs
1
ENC-01
Interface for incremental encoder 5 to 12Vdc, 100kHz (1) with repeater
2
ENC-02
Interface for incremental encoder 5 to 12Vdc, 100kHz(1)
2
RS485-01
Interface for RS-485 serial communication (modbus)
3
RS232-01
Interface for RS-232C serial communication
3
CAN interface (CANopen, DeviceNet); RS-485
3
CAN interface (CANopen, DeviceNet)
3
Profibus DP interface
3
CAN/RS485-01
CAN-01
PROFIBUS DP-01 (*)
CFW11
Name
PLC functions; IEC programming; electronic gear box
9 digital inputs; 3 relay outputs; 3 digital outputs
PLC11-01 (*)
14-bit analog input; 2 analog outputs with 14-bit resolution
1, 2 and 3
2 encoder interfaces; RS-485 MODBUS-RTU; CAN
(CANopen, DeviceNet, CANopen master/slave)
PROFIBUS DP-05
Profibus DP interface
4
Devicenet-05
Devicenet 4 interface
4
EtherNetIP-05 (*)
Ethernet IP interface
4
HMID - 01
Blind cover for slot HMI
-
RHMIF - 01
Frame for remote HMI
-
KN1A - 01
Conduit kit for size A
-
KN1B - 01
Conduit kit for size B
-
KN1C - 01
Conduit kit for size C
-
Options••
g
g
g
Safety stop in compliance with EN 954 - 1 / category III
External control feed with 24 Vdc
RFI filter in compliance with EN 61800 - 3 (internal)
** Factory ordered
Data is subject to change without notice.
APG2010.indd 43
WEG Automation - Products and Solutions
A-43
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
CFW11
A-44
APG2010.indd 44
1-800-ASK-4WEG
Data is subject to change without notice.
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
Superdrive Programming Software
CFW11
Programming software for PC (USB connection), Windows™
environment for parametrization, command and monitoring
of CFW11 inverters.
Human/Machine Interface
Left soft key: function
defined by the text in the display
Right soft key: function defined by
the text in the display.
Monitoring Modes
Data is subject to change without notice.
APG2010.indd 45
WEG Automation - Products and Solutions
A-45
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
(NEMA1/IP21 Frame size A, B, C – NEMA1/IP20 Frame Size D)
380…480V
CFW11
200…240V
Motor
Volts
ND
HD
ND
HD
CATALOG NUMBER
HP
HP
Amps Amps
INPUT POWER SUPPLY: SINGLE OR THREE PHASE - 200…240V
1.5
1.5
6
5
CFW110006B2ON1Z
2
2
7
7
CFW110007B2ON1Z
INPUT POWER SUPPLY: SINGLE PHASE - 200…240V
3
3
10
10
CFW110010S2ON1Z
INPUT POWER SUPPLY: THREE PHASE - 200…240V
2
1.5
7
5.5
CFW110007T2ON1Z
3
2
10
8
CFW110010T2ON1Z
4
3
13
11
CFW110013T2ON1Z
5
4
16
13
CFW110016T2ON1Z
7.5
6
24
20
CFW110024T2ON1Z
10
7.5
28
24
CFW110028T2ON1Z
12.5 10
33.5
28
CFW110033T2ON1Z
15 12.5
45
36
CFW110045T2ON1Z
20
15
54
45
CFW110054T2ON1Z
25
20
70
56
CFW110070T2ON1Z
30
25
86
70
CFW110086T2ON1Z
40
30
105
86
CFW110105T2ON1Z
50
40
142
115
CFW110142T2ON1Z
60
50
180
142
CFW110180T2ON1Z
75
60
211
180
CFW110211T2ON1Z
50
40
142
115
CFW110142T2ON1DBZ
60
50
180
142
CFW110180T2ON1DBZ
75
60
211
180
CFW110211T2ON1DBZ
INPUT POWER SUPPLY: THREE PHASE - 380…480V
2
2
3.6
3.6
CFW110003T4ON1Z
3
3
5
5
CFW110005T4ON1Z
4
3
7
5.5
CFW110007T4ON1Z
6
6
10
10
CFW110010T4ON1Z
7.5
6
13.5
11
CFW110013T4ON1Z
10
7.5
17
13.5
CFW110017T4ON1Z
15
10
24
19
CFW110024T4ON1Z
20
15
31
25
CFW110031T4ON1Z
25
20
38
33
CFW110038T4ON1Z
30
25
45
38
CFW110045T4ON1Z
40
30
58.5
47
CFW110058T4ON1Z
50
40
70.5
61
CFW110070T4ON1Z
60
50
88
73
CFW110088T4ON1Z
75
60
105
88
CFW110105T4ON1Z
100
75
142
115
CFW110142T4ON1Z
150 100
180
142
CFW110180T4ON1Z
175 150
211
180
CFW110211T4ON1Z
75
60
105
88
CFW110105T4ON1DBZ
100
75
142
115
CFW110142T4ON1DBZ
150 100
180
142
CFW110180T4ON1DBZ
175 150
211
180
CFW110211T4ON1DBZ
200
150
211
242
CFW110242T4ON1Z*
250
200
242
312
CFW110312T4ON1Z*
300
250
312
370
CFW110370T4ON1Z*
350
300
370
477
CFW110477T4ON1Z*
400
350
477
515
CFW110515T4ON1Z*
500
450
515
601
CFW110601T4ON1Z*
600
500
560
720
CFW110720T4ON1Z*
Frame
Size
Dynamic
Braking
DIMENSIONS
HxWxD
App. Shpg. Wt.
(lbs.)
List Price
Multiplier
Symbol
A
A
YES
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
19.9
20.8
$1,370
$1,430
V1
V1
A
YES
12.04 x 5.71 x 8.94
20.8
$1,510
V1
A
A
A
A
B
B
B
C
C
C
D
D
E
E
E
E
E
E
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
13.82 x 7.45 x 8.94
13.82 x 7.45 x 8.94
YES
13.82 x 7.45 x 8.94
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
19.82 x 11.81 x 12
19.82 x 11.81 x 12
NO USE CFW11 26.6 x 13.2 x 14.1
XXXXT2ON1D26.6 x 13.2 x 14.1
BZ BELOW
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
YES
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
19.9
19.9
20.8
21.2
28.5
28.5
28.5
44.1
45
49.2
115.9
120.2
150
150
150
150
150
150
$1,350
$1,410
$1,440
$1,542
$2,020
$2,201
$2,900
$3,310
$4,400
$6,600
$7,222
$9,000
$10,590
$13,750
$19,600
$12,114
$16,719
$23,219
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
A
A
A
A
A
B
B
B
C
C
C
D
D
E
E
E
E
E
E
E
E
F
F
F
F
G
G
G
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
13.82 x 7.45 x 8.94
YES
13.82 x 7.45 x 8.94
13.82 x 7.45 x 8.94
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
19.82 x 11.81 x 12
19.82 x 11.81 x 12
26.6 x 13.2 x 14.1
NO USE CFW11
26.6 x 13.2 x 14.1
XXXXT2ON1D26.6 x 13.2 x 14.1
BZ BELOW
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
YES
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
19.9
20.3
20.3
20.8
21.2
28.5
29.8
31.3
45.9
52.9
54.9
119.5
122.8
150
150
150
150
150
150
150
150
$1,469
$1,500
$1,556
$1,790
$1,880
$2,300
$2,720
$3,873
$4,300
$5,400
$6,030
$7,500
$8,900
$10,650
$12,500
$17,500
$21,000
$13,600
$15,900
$23,115
$27,020
$23,000
$29,366
$31,314
$41,027
$43,970
$50,088
$59,330
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
V1
NO, use
external
module
NO, use external
module
48.6 x 16.9 x 14.2
267
48.6 x 16.9 x 14.2
48.6 x 16.9 x 14.2
48.6 x 16.9 x 14.2
50.0 x 21.1 x 16.8
50.0 x 21.1 x 16.8
50.0 x 21.1 x 16.8
271
277
287
420
425
441
*NEMA 1 Kit fir frame size F and G is available fir free under request when purchased together wuth a CFW11 frame size F or G.
A-46
APG2010.indd 46
1-800-ASK-4WEG
Data is subject to change without notice.
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
DESCRIPTION
I/O Exp Modules
Encoder Modules
CATALOG NUMBER
List Price
Multiplier Symbol
IOA Module for CFW11: 2 analog inputs (14 bits, voltage or current); 2 digital inputs; 2 alalog outputs (14 bits, voltage or current); 2 digital outputs (open-collector)
IOA-01
$1,000
V1
IOB Module for CFW11: 2 isolated analog inputs (12 bits, voltage or current);
2 digital inputs; 2 isolated alalog outputs (11 bits, voltage or current); 2 digital
outputs (open-collector)
IOB-01
$500
V1
Incremental encoder module, 5 to 12 VDC at 100 kHZ, with encoder signal repeater
ENC-01
$400
V1
Incremental encoder module, 5 to 12 VDC at 100 kHZ, without encoder signal
repeater
ENC-02
$400
V1
RS-485 serial communication module (Modbus-RTU)
RS485-01
$200
V1
RS-232C serial communication module (Modbus-RTU)
RS232-01
$150
V1
RS232C serial commuication module with DIP-switches for microcontroller’s flash
memory programming
RS232-02
$180
V1
CAN/RS485-01
$480
V1
CAN-01
$390
V1
Profibus DP interface module - Anybus card*
PROFDP-05
$1,100
V1
DeviceNet interface module - Anybus card*
DEVICENET-05
$1,100
V1
Ethernet/IP interface module - Anybus card*
CAN and RS-485 communication module (CANopen / Modbus / DEVICENET)
Communication
Modules
PLC & Flash
Memory Modules
Keypad
Accessories and
Remote Keypad
Cables
CAN interface module (CANopen / DEVICENET)
ETHERNET/IP-05
$1,100
V1
RS-232 serial communication module (Modbus-RTU)
RS232-05
$250
V1
RS-485 serial communication module (Modbus-RTU)
RS485-05
$300
V1
PLC functions; Ladder programming; electronic gear box; 9 digital inputs; 3 drycontact digital outputs; 3 open-collector digital outputs; 1 analog input (14 bits); 2
analog outputs (14 bits); 2 encoder interfaces; RS-485 Mobus-RTU interface; CAN
interface (CANopen, CANopen master/slave)
PLC11-01
$1,876
V1
Flash Memory Module for CFW11
MMF-01
$59
V1
CFW11 keypad
HMI-01
$304
V1
Frame for keypad remote assembly
RHMIF-01
$57
V1
Blank cover for keypad slot
HMID-01
$45
V1
1m (3.3ft) remote keypad cable
IHM-CAB-RS-1M
$47
V1
2m (6.6ft) remote keypad cable
IHM-CAB-RS-2M
$52
V1
3m (10ft) remote keypad cable
IHM-CAB-RS-3M
$57
V1
5m (16ft) remote keypad cable
IHM-CAB-RS-5M
$65
V1
IHM-CAB-RS-7.5M
$76
V1
Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and legends (22mm) replaces CFW-REM
CSW-SP3PBS
$460
Z5
Remote Station-includes Start PB, Stop PB, 1-NC and 1-NO contact block, Potentiometer 5k and legends (30mm) replaces CFW-REM
CSW30-SP3PBS
$535
Z5
7.5m (25ft) remote keypad cable
IHM-CAB-RS-10M
$88
V1
Conduit Kit for frame size A
KN1A-01
$69
V1
Conduit Kit for frame size B
KN1B-01
$82
V1
Conduit Kit for frame size C
KN1C-01
$94
V1
KIP21D-01
$100
V1
Power Cables Shielding Kit for frame size A
PCSA-01
$40
V1
Power Cables Shielding Kit for frame size B
PCSB-01
$42
V1
Power Cables Shielding Kit for frame size C
PCSC-01
$45
V1
10m (33ft) remote keypad cable
Conduit Kit
IP21 Kit for frame size D
Shielding Kit
CFW11
Options and Accessories
*Anybus card goes in slot 4 and allows the user to combine the PLC11 board with DeviceNet or Profibus or Ethernet/IP.
Data is subject to change without notice.
APG2010.indd 47
WEG Automation - Products and Solutions
A-47
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
CFW11
Technical Data
200...240V: +10% ...-15% of rated voltage
Supply
380...480V: +10% ...-15% of rated voltage
Supply frequency
50/60Hz, +/-2Hz
Output frequency
0 to 300Hz
Vector with encoder
Types of control
Vector sensorless
V V W: voltage vector
V/F (scalar)
Ambient temperature
CFW11
Humidity
Altitude
-10 ...50ºC
up to 60º with output current reduction (2%/ºC above 50ºC)
5 to 90% without condensation
0 to 1000m
Up to 4000m without current reduction (1%n for each 100m above 1000m)
Dynamic braking (available in all standard models)
Braking methods
Optimal braking
DC braking
Efficiency
Degree of protection
Possibility of flange mounting
Overload
Analog inputs
Greater than 97%
IP21 for models with A, B and C sizes
IP20 / NEMA1 for models with D size
Available in all standard models, rear part of heatsink with IP54 degree of protection
Normal Duty: 110%, 60s
Heavy Duty: 150%, 60s
1 differential, resolution 12 bits, 0 to 10V/(0)4 to 20mA
1 differential, resolution 11 bits + signal, 0 to +/- 10V/(0)4 to 20mA
Analog outputs
2 isolated, resolution 11 bits, 0 to 10V/(0)4 to 20mA
Digital inputs
6 optoisolated, bi-directional, 24Vdc
Relay outputs
3 reverse contact outputs (NO/NC), 240Vac/1A
Motor thermistor
PTC/PT100/KTY84, use 1 analog output programmed for contstant current + 1 analog input programmed for voltage
Supply + 24Vdc available for user
24Vdc +\-20%, 500ma
IEC 60146 – Semiconductor convertors
UL508C – Safety for power conversion equipment
EN 50178 – Electronic equipment for use in power installations
EN 61800-2 – General requirements adjustable speed electrical power drive systems
Norms
EN 61800-5-1 – Safety requirements adjustable speed electrical power drive systems
E N 61800-3 – EMC product standard including specific test methods adjustable speed electrical power drive
systems
EN 60204 – Electronic equipment of machines
RoHS and WEEE Guidelines
A-48
APG2010.indd 48
1-800-ASK-4WEG
Data is subject to change without notice.
6/18/10 8:40 AM
www.weg.net
Variable Frequency Drives
Communication Options & Superdrive
Profibus, Modbus and Device Net
Description
Catalog Number
List Price
Multiplier
Symbol
$37
V1
$301
V1
SUPERDRIVE KIT - CFW08 (KCS-CFW08 - RS232 PC Cable + CD Software)
KSD-CFW08
$97
V1
SUPERDRIVE KIT - CFW09 (KCS-CFW09 - RS232 PC Cable + CD Software)
KSD-CFW09
$156
V1
SUPERDRIVE G2 KIT - SSW06
KSDG2-SSW06
$62
V1
SUPERDRIVE G2 KIT - SSW07 (KRS-232-SSW07 + CAB-RS-3 + CD Software)
KSDG2-SSW07
$225
V1
MIW-02
$221
V1
417102506
$900
V1
RS-232/485 Converter (mounted externally)
RS-485 Kit for PC
CFW11
SUPERDRIVE
SUPERDRIVE+USB
SUPERDRIVE Software G2
SUPERDRIVE Software + USB Cable
Communication Options
The table below shows the hardware options required to provide WEG VFD’s and Soft Starters
with different serial communications or networking capabilities.
RS-232
RS-485
Profibus-DP
DeviceNet
Modbus-RTU
CFW08
KCS-CFW08
KCS-CFW08
MIW-02
KCS-CFW08
MIW-02
MFW-01/PD
KCS-CFW08
MIW-02
MFW-01/DN
KCS-CFW08
MIW-02
CFW09
Standard
Exp. Boards
KFB-PD
KFB-DN
Exp. Boards
DEVICENET-05 - Slot 4
CAN/RS-485-01 - Slot 3
CAN-01 - Slot 3
RS485-01 08
RS232-01 Slot 3
CFW11
-
-
PROFDP-05
Slot 4
SSW05
Standard
MIW-02
MIW-02
MFW-01/PD
MIW-02
MFW-01/DN
MIW-02
MFW-01/MR
SSW06
NO
NO
KFB-PDSSW06
KFB-DN-SSW06
KRS-485
SSW06
SSW07
See SSW07 Accessories
“RS-485 Kit for PC” is required when SUPERDRIVE communicates with a multi drive RS-485
network. It is composed of a RS-232/RS-485 converter and a cable to connect to PC.
Superdrive
WEG Superdrive is a windows based software program that allows serial (RS - 232 or RS - 485)
communication between a PC and all WEG Soft Starters and Variable Frequency Drives. Superdrive is
an excellent programming, documentation, and troubleshooting tool for WEG Soft Starters and VFD’s.
Superdrive is available for free download at www.wegelectric.com.
Hardware accessories may be required depending on the Soft Starter or VFD line.
Standard Features
g Online and Offline Soft Starter or VFD programming
g Command and Monitoring
g Parameter set storage in a computer file format
Data is subject to change without notice.
APG2010.indd 49
WEG Automation - Products and Solutions
A-49
6/18/10 8:40 AM
USACFW1009
Please contact your authorized distributor: