Mounting flange
BF 12-F
Dimensions
24
16
8
18
30
12
12
4.2
4
Dead stop
7.8
4.1
14
Model number
BF 12-F
Mounting flange with dead stop, 12 mm
Features
Technical data
General specifications
Inside diameter
• Black plastic housing with dead stop
for all cylindrical sensors with M12
thread
Mechanical specifications
• Easy sensor replacement via fixing
flap in the top of the fixing flange
Notes
• Embeddable sensors lie flush with
the surface of the fixing flange
• The cap of a non-embeddable sensor
protrudes through the fixing flange.
This allows non-embeddable sensors
to be easily mounted on metal surfaces.
Ambient temperature
Material
-25 ... 85 °C (248 ... 358 K)
Polycarbonate (PC), black
Installation
• Position the mounting bracket on the desired place
• Mark the position of drilling holes in the mid section of the oblong holes
• Drill the mounting holes through the surface
• Screw on the mounting bracket slightly via the lateral oblong holes by using suitable M4
screws
• Stick the sensor through the mounting bracket and fix the sensor by the lid on the upper
part of the bracket
• Adjust the bracket and make the final positioning
• Fix the mounting bracket finally with the screws
Release date: 2005-09-28 14:40 Date of issue: 2005-09-28 107459_ENG.xml
• max. 8 mm range of adjustment is
provided for the positioning of the
flange by means of the elongated
holes on the side
12 mm
Ambient conditions
Subject to reasonable modifications due to technical advances.
Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
1