FL2 SERIES
WLS LIGHTING SYSTEMS
FLOODLIGHT
SPECIFICATIONS
HOUSING - Housing is one-piece, die-cast aluminum ensuring weather-tight construction.
DOOR FRAME - The one-piece, die-cast aluminum lens frame is hinged and secured to the
housing with four captive screws.
LENS / GASKET - One-piece, high impact, flat clear tempered glass lens. The lens frame
features a continuous silicone gasket for maximum sealing to the housing.
SOCKET - Porcelain mogul-base sockets feature nickel-plated lamp grip screws.
LIGHT SOURCES - Pulse Start Metal Halide, Full Spectrum, Induction, and High Pressure
Sodium. Clear lamp is supplied as standard.
BALLASTS - CWA high-power factor type ballast. All ballast types are designed for -20°
operation.
REFLECTORS / DISTRIBUTION PATTERNS - Available reflectors include Standard
Reflector (SR), Type 5 (V), Cutoff Light Distribution (COD), Dimpled Reflector (DIM), Forward
Throw (FP), and Wide Angle (WA).
REFLECTORS/DISTRIBUTION PATTERNS
FINISH - Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process.
The DuraGrip finish withstands extreme weather changes without cracking or peeling, and
is guaranteed for five full years. Standard colors include bronze, black, platinum plus, buff,
graphite, satin verde green, metallic silver and white. Custom colors available upon request.
MOUNTING - Stamped two-piece bracket complete with hardware. Also available with
liquid tight connector and 3’ of U.L. Listed 16/3 STW cord, one end blunt cut, opposite end
jacket stripped 6”, leads stripped 1/2”. Ring terminal on green wire. Also available with
slipfitter, external mount slipfitter, extruded mounting arm, yoke mount and direct pole
mount.
DIMENSIONS
10 1/4 "
(254mm)
23 3/4””
(584mm)
24”
(584mm)
Approved By:
Project Name:
Location:
Date:
P.O. Box 100519
Fort Worth, TX 76185
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
09 Rev. 4/09
FL2 SERIES
FLOODLIGHT
ORDERING INFORMATION
SERIES
FL2
DISTRIBUTION
SR - Standard
Reflector
5 - Type V
COD - Cutoff
Distribution
DIM - Dimpled
Reflector
FP - Forward Throw
WA - Wide Angle
Reflector
WA - Wide Angle
Reflector
5 - Type V
FL2
WB
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
LAMP
LIGHT
WATTAGE
SOURCE*
400W
HPS - High Pressure
Sodium
PSMH - Pulse Start Metal
Halide
1000W
MH - Metal Halide
HPS - High Pressure
Sodium
PSMH - Pulse Start Metal
Halide
775W
FS - Full Spectrum
200W
IND - Induction
250
LENS
PSMH
FG - Flat Clear
Tempered
Glass
LINE
LUMINAIRE
VOLTAGE
FINISH
480V
MT - Multi Tap 2
TT - Tri-Tap 3
FG
MT
BRZ - Bronze
BLK - Black
PLT - Platinum Plus
MSV - Metallic
Silver
WHT - White
CC - Custom Color
BRZ
OPTIONS
ACCESSORIES
PC - Photocell with
Twist Lock
Receptacle
SF - Slipfitter
ESF - External
Slipfitter
SFC - Slipfitter
Cover
EMA - Extruded
Mounting
Arms
YK - Yoke Mount
DPM - Direct Pole
Mount
NO - No Options
GS - Glare Shield
PS- Polycarbonate
Shield
WG - Wire Guard
BAF - Baffle
TF - Top Frame
SC - Safety Cable
SF - Single Fusing
DF - Double Fusing
NA - No Accessories
NO
NA
(EXAMPLE ORDER)
ORDER:
WLS-FL2FOOTNOTES:
* In accordance with the 2007 Energy Independence and Security Act (EISA), fixtures will
no longer be available in Probe Start Metal Halide with wattages from 150 watts through
500 watts for new installations. Replacement parts for existing fixtures are still available.
1 - Specify line voltage.
2 - MT - Multi Tap is shipped standard unless otherwise specified. (Multi Tap consists of 120V, 208V,
240V, and 277V. Multi Tap is pre-wired for highest voltage. Alternate voltages will require field re-wiring.
3 - TT- Tri-Tap consists of 120V, 277V, and 347V. Tri-Tap is pre-wired for highest voltage.
Alternate voltages will require field re-wiring.
GS - Glare Shield
SF - Slipfitter
ESF - External Slipfitter
PS - Polycarbonate Shield
SFC - Slipfitter Cover
Approved By:
Project Name:
Location:
Date:
P.O. Box 100519
Fort Worth, TX 76185
800.633.8711
WG - Wire Guard
EMA - Extruded Mountign Arm
Fax: 817.735.4824
BAF - Baffle
YK - Yoke Mount
DPM - Direct Pole Mount
www.wlslighting.com
09 Rev. 3/09