Application
A decorative cylinder for surface, wall or pendant mount to compliment recessed
downlights of the same aperture and performance.
PRODUCT DATA
SERIES C6SMHT4
REFLECTOR: Two-piece reflector optics consists of an upper reflector in specular
Alzak® for maximum light output. Lower parabolic reflector provides 45° cutoff to lamp
image and is available in specular Alzak as well as a variety of diffused and specular hues.
Frosted lens eliminates striations in beam and enhances visual comfort. Optional clear
lens is available. Lens remains captive during re-lamping process. Upper reflector and
lens are removable for cleaning purposes.
6” Aperture 8” x 16” Cylinder T4 Metal Halide Lamp
HOUSING: The cylindrical housing is heavy gauge aluminum and finished to an
architectural grade. The standard exterior finish is matte white, powder coat paint. The
cylinder can be surface mounted, wall mounted or suspended by pendant.
ELECTRONIC BALLAST: Solid state electronic ballast is thermally protected.
ELECTRICAL: Universal voltage, 120/277 volt input.
SOCKET: 4 KV rated G8.5 Bi Pin socket.
LAMP DATA: T4 ceramic metal halide.
Lamp
Watts Base Life Hrs. Lumens
CDM70/T4
CDM35/T4
CDM20/T4
70
39
20
G8.5
G8.5
G8.5
6,000
9,000
7,5,00
6,400
3,300
1,700
Wall Mount
Inside lamp, initial lumens
MOUNTING:
(Specify when ordering.)
Ceiling (Surface) Mount –
Provided with mounting holes for securement to 4" octagon junction box.
Ceiling Mount
Pendant Mount – Swivel mount canopy allows cylinder to hang plumb up to 30° sloped
ceiling stem 3/8" IPS (specify length) canopy adds 1.5" to overall length. Standard finish
white powder coat. Specify Pendant Kit as follows:
EXAMPLE:
PK 24 W
Swivel Pendant Kit
Stem Length in inches (add 1.5" for canopy)
White Finish (W), Black (B), or Bronze (Z)
Catalog Number –
For Damp
Locations
C6SMHT4______________________________________________________
Manufactured and tested to
UL#1598 and CSA standards.
Note: Suitable for damp location.
/
AHTF41____________________________________
Reflector
Example: C6SMHT470E4MD
Example: AHTF41NDSCLPF
Fixture Series
Lamp/Wattage
Type/Voltage
Beam Distribution
Surface
C6SMHT4
70
Input Voltage
MD–Med. (46°)
Pendant
C6PMHT4
Wall
C6WMHT4
39
20
Options
E4 120/277 V ND–Narrow (33°) F=Fuse
Electronic
WD–Wide (52°)
Trim
Trim Finish w/polished flange
AHTP61Nd – Narrow Distribution (Micro Prismatic Lens)
AHTP61Md– Medium Distribution (Micro Prismatic Lens)
AHTP61Wd– Wide Distribution (Micro Prismatic Lens)
SCLPF– Soft Specular Clear “Alzak”
with Polished Flange
For white painted flange, drop “PF” from Catalog #.
For other finishes, consult reflector section.
Suffix #
Black Cylinder Housing.......................... – B
Bronze Cylinder Housing....................... – Z
Fixture Type
Job Reference/Location
Lamp Type
Approval
All products are manufactured in accordance with U.L. standard 1598.
Suitable for use in damp locations. All Pathway® products meet or
exceed requirements as established by the National Electrical Code.
Specifications subject to change without notice.
Alzak® is a registered trademark of Alcoa.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com
SERIES C6SMHT4 - 6" Aperture - 8" x 16" Cylinder T4 Meal Halide Lamp
Wall Mount – Standard bracket protrudes 4.5" from wall (specify others) mounts to 4"
octagon junction box.
SF15.55
CBUACN