FP Series Parking/Roadway Area Light
FEATURES Housing/Optics/Lens Die cast aluminum
housing with flush doorframe and rounded edges are
standard with bronze, black or white polyester powder
coat paint. Other colors available upon request. The
16” and 23” housings can be rotated. The 16” and 23”
housings come standard with Type III distribution. Ideally
suited for roadway applications, parking areas or building
mounted security lighting. The 16” and 23” housings have
mounting knockouts on three sides that allow the housing
to be rotated 90 degrees either right or left. A clear,
tempered glass lens is held securely in a hinged die cast
doorframe. Complete silicon gasketing around the lens
frame and at mounting points provide a watertight seal.
LAMPS
50 to 1000W
12” housing: 50- 150W medium base lamp
16” housing: 70- 400W mogul base lamp
70, 100W Induction
23” housing: 400- 1000W mogul base lamps
EPA Ratings Because of its unique design, lower EPA levels
are obtained, resulting in lower pole costs. EPA Ratings are
listed on page 256.
MOUNTING OPTIONS Refer to page 253 for a
complete description of mounting options.
Ballast All fixtures come standard with a CWA, 4-Tap or
480V ballast. All units are supplied with a 36” SOW 16/3
cord. If no voltage is specified, cord is connected to highest
Voltage.
The FP Series is ideally suited for roadway
applications, parking areas or for building-mounted
security lighting. Units feature a sleek square design
with rounded edges in either a 12”, 16” or 23” die
cast aluminum housing.
FP Series Ordering Information
SERIES
MOUNTING
FPS = 12” 8 = Without
FPM = 16” Mounting
FPL = 23”
LIGHT SOURCE
FPS, FPM & FPL
LAMP
FPS Only
05 = 50W PSMH, HPS
5 = HPS
8 = PSMH (Enclosed)
VOLTAGE
FPS
1 = 120V
2 = 277V
07 = 70W PSMH, HPS 3 = 208V
10 = 100W PSMH, HPS 4 = 240V
15 = 150W PSMH, HPS
FPS & FPM
FPM Only
1 = Induction
FPL Only
4 = MH (1000W only;
enclosed)
FPM Only
07 = Induction
10 = Induction
17 = 175W PSMH
20 = 200W PSMH
25 = 250W PSMH, HPS
32 = 320W PSMH
35 = 350W PSMH
FPS, FPM & FPL
M = 4-Tap (120, 208, 240, 277V 60Hz, Tapped @ 277)
5 = 480V (150W and greater only)
M5 = 5-Tap (120, 208, 240, 277, 480VAC Tapped @ 480V; 1000W MH only)
Photocell Option (must replace M with 1, 2, 3, or 4 voltage for 4-Tap Ballasts):
1 = 120V
2 = 277V
FPM and FPL
3 = 208V
40 = 400W PSMH, HPS 4 = 240V
Dimensions
75 = 750W PSMH
87 = 875W PSMH
99 = 1000W PSMH,
MH, HPS
FPS
FPM
FPL
FPL Only
(Enclosed only)
OPTIONS
Fusing
(X)F = Single Fuse (specify voltage: 1 = 120V; 2 = 277V)
(X)J = Dual Fuses (specify voltage: 3 = 208V; 4 = 240V; 5 = 480V)
Q = Quartz Standby, UL Listed, Lamp included
P = T wist + Lock Photocell; NEMA receptacle and Sensor. (FPM and FPL only; specify
voltage)
WT* = White Housing
BK* = Black Housing
*Custom Colors Available: Consult factory for pricing and delivery
Lamp Included
ACCESSORIES
WG-12 = 12” FPS Wire Guard
VS-12 = 12” FPS Polycarbonate Vandal Shield
WG-16 = 16” FPM Wire Guard
VS-16 = 16” FPM Polycarbonate Vandal Shield
WG-23 = 23” FPL Wire Guard
VS-23 = 23” FPL Polycarbonate Vandal Shield
WBR23¹ = 23” FPL Wishbone Mount for 4” Round Pole
WBS23¹ = 23” FPL Wishbone Mount for 4” Square Pole
Mounting Accessories
MA1 = 1-1/2” Close Pole Mount
MA2 = 6” Extended Pole Mount
MA5 = 12” Extended Pole Mount
1
Fixture FixtureFixture Approx.
Length Width Depth Ship Wt.
12.4”
12.4” 5.25”
18 lbs.
16.4”
16.4”
7.0”
33 lbs.
23.4”
23.4” 10.25” 68 lbs.
W
L
See page 253 for restrictions.
D
MA1
1-1/2” Close Pole Mount
800 523-3602
MA2
6” Extended Pole Mount
www.simkar.com
MA5 12” Extended Pole
Mount
WB
Wishbone Mount
SPECIFICATIONS SUBJECT TO CHANGE.
Outdoor 243