NZQA Expiring unit standard
7205 version 6
Page 1 of 3
Title
Set spools for spool axminster carpet weaving
Level
3
Credits
16
Purpose
This unit standard is for people working in the carpet
manufacturing industry. People credited with this unit standard
are able to demonstrate knowledge of spool setting, and
prepare spools and yarn for pattern lines.
Classification
Textiles Manufacture > Carpet Manufacture
Available grade
Achieved
Entry information
Critical health and
safety prerequisites
Persons credited with this unit standard must not have colour
vision deficiencies in any part of the visible colour spectrum.
Explanatory notes
1
Plant safety practices and procedures comply with Health and Safety in Employment
(HSE) Act 1992, and workplace procedures.
2
Workplace productivity and quality requirements are met.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of spool setting.
Evidence requirements
1.1
Spool setting equipment is explained in terms of its function and use.
Range
1.2
setting machine, spool, setting table, length counter, reed, clamp,
spool drive.
Setting pattern is described in terms of its structure.
Range
rows, tuft placement, tuft colour.
Outcome 2
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
7205 version 6
Page 2 of 3
Prepare spools and yarn for pattern lines.
Evidence requirements
2.1
Spool set-up is carried out in accordance with workplace safety procedures.
2.2
Yarn is loaded on setting table in sequence required by pattern.
2.3
Reed is threaded according to row on pattern.
2.4
Spool is loaded according to work instruction and pattern.
Range
2.5
end breaks mended, supply cheeses maintained, loaded to
required length, clamp applied, ends cut cleanly.
Completed spool is identified and stacked according to workplace requirement.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
28 May 1996
31 December 2019
Revision
2
16 November 1998
31 December 2019
Revision
3
10 October 2001
31 December 2019
Revision
4
12 August 2004
31 December 2019
Rollover and
Revision
5
26 March 2007
Review
6
19 May 2016
31 December 2019
31 December 2019
Consent and Moderation Requirements (CMR) reference
0030
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
7205 version 6
Page 3 of 3
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016