NZQA Expiring unit standard
31 version 6
Page 1 of 3
Title
Connect up, and perform repairs and maintenance on an on-farm
water supply system
Level
2
Credits
2
Purpose
People credited with this unit standard are able to: connect up,
and perform repairs and maintenance for, an on-farm water
supply system.
Classification
Agriculture > Agricultural Resource Maintenance
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to the Health and
Safety in Employment Act 1992, and its subsequent amendments.
2
On-farm procedures refer to the verbal and written instructions to staff on procedures
for water supply installation and maintenance.
Outcomes and evidence requirements
Outcome 1
Connect up an on-farm water supply system.
This unit standard is
Evidence requirements
expiring
Range
one of – trough, sprinkler, tank water supply.
1.1
Tools, equipment, and materials selected are suitable, and used appropriately
for the task.
1.2
Fittings are connected and fitted to fully restore quantity and quality of water
supply.
1.3
Fittings and valves are fitted and adjusted in accordance with on-farm
procedures.
1.4
The surrounding area and equipment used are tidied in accordance with onfarm procedures.
Outcome 2
Perform repairs and maintenance for an on-farm water supply system.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
31 version 6
Page 2 of 3
Evidence requirements
2.1
Routine checks and faults identification for an on-farm water supply system are
carried out in accordance with on-farm maintenance procedures.
faults include but are not limited to – reduced water flow, reduced
pressure, leaks, blockages.
Range
2.2
A leak is located and fittings connected and fitted to fully restore quantity and
quality of supply
This unit standard has been replaced by unit standard
28924
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
23 January 1993
31 December 2018
Review
2
29 September 1995
31 December 2018
Review
3
28 February 1997
31 December 2018
Review
4
25 June 2002
31 December 2018
Review
5
20 May 2008
31 December 2018
This
unit
is2018
6
16
July 2015 standard
31 December
expiring
Consent and Moderation Requirements
(CMR) reference
0052
Review
5
22 August 2008
31 December 2018
Review
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
31 version 6
Page 3 of 3
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016