NZQA Expiring unit standard
10129 version 6
Page 1 of 3
Title
Demonstrate knowledge of a clamshell die cutter in the corrugated
packaging industry
Level
2
Credits
5
Purpose
People credited with this unit standard are able to demonstrate
knowledge of a clamshell die cutter in the corrugated
packaging industry, and of dies used on the clamshell die
cutter.
Classification
Fibreboard Packaging > Corrugated Case Converting
Available grade
Achieved
Explanatory notes
1
All workplace practices must meet any applicable and recognised codes of practice,
and documented workplace health, safety, and environmental procedures for
personal, product, workplace health, safety, and environmental matters, and the
obligations required under current law including the Health and Safety in Employment
Act 1992, Hazardous Substances and New Organisms Act 1996, Resource
Management Act 1991, Privacy Act 1993 and their subsequent amendments.
2
Workplace practices refer to the documented procedures for the machine and/or
workplace.
3
Assessments may be undertaken at any clamshell die cutter, whether hand fed or
hopper fed.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of a clamshell die cutter in the corrugated packaging industry.
Evidence requirements
1.1
The main components of the clamshell die cutter are identified, and their
functions and purpose are described in terms of the machinery used in the
workplace.
Range
Competenz
SSB Code 101571
components may include but are not limited to – die attachment
points, cutting plate against which die cutting is made, adjustment
and setting components, feed mechanisms.
NZQA Expiring unit standard
10129 version 6
Page 2 of 3
1.2
Adjustments available are demonstrated in accordance with workplace
practices and equipment configuration.
1.3
Die rubbering requirements for different production tasks are described in terms
of workplace practices and job requirements.
Range
durometer, width, height, style, position.
Outcome 2
Demonstrate knowledge of dies used on the clamshell die cutter.
Evidence requirements
2.1
Rule types for different production tasks are described.
Range
2.2
cutting, creasing, perforating.
The requirements for handling and storing dies are explained in terms of
workplace practices.
Replacement information
This unit standard and unit standard 10138 have been
replaced by unit standard 27790.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
18 February 1998
31 December 2015
Revision
2
27 March 2001
31 December 2015
Review
3
28 February 2006
31 December 2015
Rollover
4
12 December 2008
31 December 2015
Review
5
20 September 2012
31 December 2019
Rollover
6
10 December 2015
31 December 2019
Consent and Moderation Requirements (CMR) reference
0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Competenz
SSB Code 101571
NZQA Expiring unit standard
10129 version 6
Page 3 of 3
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Competenz
SSB Code 101571