25316 version 1
Page 1 of 3
Complete documentation, and log and report information, for a gas
industry organisation
Level
2
Credits
3
Purpose
This unit standard is for people working, or intending to work, in the gas
industry.
People credited with this unit standard are, for a gas industry organisation,
able to: locate, explain, and complete documentation; and log and/or report
information.
Subfield
Gas Industry
Domain
Gas Marketing, Business and Administration
Status
Registered
Status date
22 May 2009
Date version published
22 May 2009
Planned review date
31 December 2014
Entry information
Open.
Accreditation
Evaluation of documentation by NZQA.
Standard setting body (SSB)
NZ Motor Industry Training Organisation (Incorporated)
(MITO)
Accreditation and Moderation Action Plan (AMAP) reference
0114
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Performance of the elements of this unit standard must comply with relevant site
requirements and the Health and Safety in Employment Act 1992.
2
Definitions
Company procedures refer to the documented methods for performing work activities
and include health and safety, environmental, quality management requirements and
site requirements. They may refer to manuals, codes of practice, or policy
statements.
 New Zealand Qualifications Authority 2016
25316 version 1
Page 2 of 3
Material Safety Data Sheet (MSDS) refers to an informational document provided by
the manufacturer regarding the safety and handling procedures and precautions for
materials used in the workplace.
PPE refers to personal protective equipment.
Elements and performance criteria
Element 1
Locate and explain documentation for a gas industry organisation.
Range
includes – incident reports, hazard identification, PPE check sheet, work orders;
may include but is not limited to – vendor information, forms, standard operating
procedures, MSDS, topographical maps, alignment sheets, purchase orders,
work permits, plant release, maintenance checklist.
Performance criteria
1.1
Documentation is located and interpreted in accordance with site requirements
and company procedures.
1.2
Documentation is explained in terms of its purpose.
Element 2
Complete documentation for a gas industry organisation.
Performance criteria
2.1
Documentation is completed in accordance with company procedures.
Range
leave form, incident reports;
may include but is not limited to – timesheet, work order, PPE
check sheet.
Element 3
Log and/or report information for a gas industry organisation.
Performance criteria
3.1
Information is logged and/or reported in accordance with its function and
company procedures.
Range
leave form, incident reports;
may include but is not limited to – timesheet, work order, PPE
check sheet.
 New Zealand Qualifications Authority 2016
25316 version 1
Page 3 of 3
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the NZ Motor Industry Training Organisation (Incorporated) (MITO)
info@mito.org.nz if you wish to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016