NZQA Expiring unit standard
2535 version 9
Page 1 of 3
Title
Manufacture and install shop fixtures and fittings
Level
5
Credits
15
Purpose
People credited with this unit standard are able to: set out shop
fittings and fixtures; machine and assemble components for
shop fittings and fixtures in timber and laminate; and install
shop fittings and fixtures.
Classification
Joinery > Stairs and Other Joinery Trade Skills
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
This unit standard is
Evidence requirements
expiring
1.1
The shop fittings and fixtures
are identified from the working drawings.
Set out shop fittings and fixtures.
1.2
The site conditions are measured and documented in accordance with
workplace practice.
1.3
The quantity of material needed is calculated and an order is placed in
accordance with workplace practice.
1.4
The shop fittings and fixtures are set out to conform to the working drawings.
Outcome 2
Machine and assemble components for shop fittings and fixtures in timber and laminate.
Evidence requirements
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2535 version 9
Page 2 of 3
2.1
Components are machined to conform to the set-out in accordance with
workplace practice.
2.2
The fittings and fixtures are assembled on or off-site to conform to the working
drawings.
Outcome 3
Install shop fittings and fixtures.
Range
includes but is not limited to – timber, laminate, pre-finished metal or plastic.
Evidence requirements
3.1
The fittings and fixtures are attached and finished in accordance with the
specifications.
3.2
The units are assembled in accordance with the manufacturer’s specifications.
3.3
The units are installed to the requirements of the specifications.
3.4
Protective measures to ensure workplace safety are employed in accordance
with workplace practice.
Replacement information
This unit standard, unit standard 2522, unit standard
2539, unit standard 25159, unit standard 25602, and unit
standard 25604 have been replaced by unit standard
28224.
This unit standard is
expiring
Status information and last date for
assessment for superseded versions
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Process
Version
Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Review
2
16 August 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Revision
4
21 October 1997
31 December 2018
Revision
5
20 December 1999
31 December 2018
Revision
6
16 June 2005
31 December 2018
Review
7
23 January 2009
31 December 2018
Review
8
24 October 2014
31 December 2018
Rollover
9
17 September 2015
31 December 2018
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2535 version 9
Page 3 of 3
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016