NZQA Expiring unit standard 2550 version 9 Page 1 of 3 Title Use hand tools for joinery and related trades Level 2 Credits 6 Purpose People credited with this unit standard are able to use hand tools to perform a process, and maintain hand tools for joinery and related trades. Classification Joinery > Stairs and Other Joinery Trade Skills Available grade Achieved Explanatory notes 1 All workplace practices must comply with current legislation, codes of practice, and documented site safety procedures for personal, product, and worksite safety. 2 Legislation and regulations relevant to this unit standard include but are not limited to – Health and Safety in Employment Act 1992; Health and Safety in Employment Regulations 1995. 3 There will be a specific range of hand tools for each trade which is obtainable from the Joinery Industry Training Organisation. Trades that might use this unit standard include but are not limited to – joinery, kitchen manufacturing, laminate fabrication, component machining. Outcomes and evidence requirements Outcome 1 Use hand tools to perform a process in joinery and related trades. Evidence requirements 1.1 The hand tools are selected for their specified use in accordance with workplace practice. 1.2 The hand tools are used to perform the activity or process in accordance with workplace practice. Outcome 2 Maintain hand tools in joinery and related trades. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 2550 version 9 Page 2 of 3 Evidence requirements 2.1 Cutting edges and points are maintained to manufacturer’s specifications. 2.2 Tools are maintained in working order, and are free of rust, and dirt, in accordance with workplace practice. 2.3 Damaged and broken tools are repaired or replaced where applicable in accordance with workplace practice. Replacement information This unit standard and unit standard 17138 have been replaced by unit standard 28227. This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below. Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 16 August 1995 31 December 2016 Review 2 16 August 1995 31 December 2016 Revision 3 21 October 1997 31 December 2016 Revision 4 20 December 1999 31 December 2016 Revision 5 16 June 2005 31 December 2016 Review 6 23 January 2009 31 December 2016 Review 7 24 October 2014 31 December 2016 Rollover 8 17 September 2015 31 December 2020 Rollover 9 15 October 2015 31 December 2020 Consent and Moderation Requirements (CMR) reference 0073 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 2550 version 9 Page 3 of 3 Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016