NZQA Expiring unit standard
1047 version 10
Page 1 of 3
Title
Hand paint letters and graphics
Level
3
Purpose
Credits
40
This unit standard is for people in the signmaking industry.
People credited with this unit standard are able to: prepare to
hand paint letters and graphics; hand paint letters and
graphics; and finish clean-up tasks.
Classification
Graphic Arts > Signmaking
Available grade
Achieved
Explanatory notes
1
Company practices refer to behavioural norms or procedures generally accepted, but
not necessarily documented, within the company.
2
All work practices shall meet the requirements of relevant legislation, including Health
and Safety in Employment Act 1992, Resource Management Act 1991, and the
requirements of industry codes of practice and documented enterprise procedures in
respect to health, safety, and environmental matters.
Outcomes and evidence requirements
This unit standard is
Prepare to hand paint letters and graphics.
expiring
Evidence requirements
Outcome 1
1.1
Proposed layout is to client specifications.
1.2
Material selected complies with brief specifications.
Range
examples include but are not limited to – brush type,
transparencies, paint type, thinners, medium rule, straight edge,
knife, lead pencil, eraser, colours, quantities, substrate.
1.3
Substrate preparation is consistent with requirements for application of lettering
and graphics.
1.4
Requirements for access equipment are identified and availability arranged as
per job schedule.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1.5
1047 version 10
Page 2 of 3
Hand support tools selected are consistent with requirements of job
specification.
Range
examples include but are not limited to – mahl stick, rest, bridge.
Outcome 2
Hand paint letters and graphics.
Evidence requirements
2.1
Setting out method selected for lettering and graphics is compatible with job
specifications and requirements of substrate.
Range
examples include but are not limited to – pencil, charcoal, crayon,
chalk, adhesive tape, marker, overhead projection lines, tracings,
scale drawings, pounce.
2.2
Lettering is legible and complies with specifications.
2.3
Paint type selected is compatible with substrate.
2.4
Application of paint follows set out of lettering and graphics and provides even
coverage with minimum brush marks.
Range
examples include but are not limited to – corners, inside and
outside curves, straight edges.
Outcome 3
Finish clean-up tasks.
This unit standard is
Finished sign is cleaned without damage to substrate, letters, and graphics.
expiring
Even, complete coverage with protective coating compatible with paint type and
Evidence requirements
3.1
3.2
substrate selected is achieved where specified.
3.3
Equipment is cleaned and stored in accordance with company practices.
3.4
Work site is cleaned and waste removed according to contract requirements.
Replacement information
This unit standard has been replaced by unit standard
27579.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1047 version 10
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
27 April 1995
31 December 2014
Review
2
25 March 1996
31 December 2014
Revision
3
31 January 1997
31 December 2014
Revision
4
9 March 1999
31 December 2014
Revision
5
12 December 2000
31 December 2014
Review
6
16 December 2003
31 December 2014
Rollover and
Revision
7
23 January 2009
31 December 2014
Review
8
19 January 2012
31 December 2014
Reinstatement
9
16 April 2015
31 December 2019
Rollover
10
10 December 2015
31 December 2019
Consent and Moderation Requirements (CMR) reference
0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
This unit standard is
Requirements for consent to assessexpiring
and an outline of the moderation system that applies
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016