9941 version 5
Page 1 of 4
Carry out the repair, restoration, and structural alteration of fibrereinforced composite boats
Level
4
Credits
20
Purpose
People credited with this unit standard are able to: establish job requirements
for the repair, restoration, and structural alteration of boats; prepare boats for
the required work; carry out the required work; and prepare boats for handing
over to clients.
Subfield
Boating Industries
Domain
Boatbuilding
Status
Registered
Status date
7 May 1997
Date version published
20 March 2009
Planned review date
31 December 2012
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
 New Zealand Qualifications Authority 2016
9941 version 5
Page 2 of 4
Special notes
1
Company procedures – the documented procedures for the machine and/or worksite.
2
The following apply to the performance of all elements of this unit standard:
a All required equipment must be set up, started up, operated, and shut down in
accordance with company procedures.
b All work practices must meet recognised codes of practice and documented
worksite health and safety procedures (where these exceed code) for personal,
product, and worksite health and safety, and must meet the obligations required
under the Health and Safety in Employment Act 1992, and subsequent and
delegated legislation.
c All work practices must meet recognised codes of practice and documented
worksite environmental procedures (where these exceed code) for personal,
product, and worksite environmental matters, and must meet the obligations
required under the Resource Management Act 1991, and subsequent and
delegated legislation.
d All work practices must meet documented worksite quality management
requirements. These include documentation of activities, events, and decisions.
e All communications made in relation to this unit standard must be made in
accordance with company procedures for content, recipient, timing, and method.
3
‘Boats’ are defined as complete boats, or major sub-components or ancillary systems
including: hull and decks; mast, spars and rigging; major interior joinery modules.
4
This unit standard can be assessed on job.
Elements and performance criteria
Element 1
Establish job requirements for the repair, restoration, and structural alteration of boats.
Performance criteria
1.1
Job specifications are obtained and verified in accordance with company
procedures.
1.2
Boat is examined to determine the nature and extent of work required according
to job specifications, and anomalies are reported in accordance with company
procedures.
Range
1.3
work – repair, restoration, structural alteration, and combinations.
Existing defects and damage not subject to the specified work are identified and
communicated in accordance with company procedures.
 New Zealand Qualifications Authority 2016
9941 version 5
Page 3 of 4
Element 2
Prepare boats for the required work.
Performance criteria
2.1
Materials and tools required for the job are selected and obtained in accordance
with job specifications.
2.2
Support is provided for boats so that they remain stable, and their original
shape is retained, throughout the work.
2.3
Protection is provided for existing equipment, fittings, furnishings, and surfaces
in accordance with job specifications.
Range
protection in situ, protection by removal and safe storage,
electrical protection.
Element 3
Carry out the required work.
Performance criteria
3.1
Parts to be repaired are disassembled according to job specifications.
3.2
Joint types are examined, repaired, and replaced according to job
specifications.
3.3
Broken components are examined, repaired, and replaced according to job
specifications.
3.4
Replacement components and materials are selected and installed according to
job specifications.
Element 4
Prepare boats for handing over to clients.
Performance criteria
4.1
Surfaces and finishes are reinstated according to job specifications.
4.2
Protected items are reinstated and checked according to job specifications.
4.3
Action is taken in accordance with company procedures in the event of
unforeseen circumstances which prevent the achievement of job specifications.
 New Zealand Qualifications Authority 2016
9941 version 5
Page 4 of 4
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016