Optimizing availability and storage costs – with clever spare parts logistics Service Solutions Instrumentation, Controls & Electrical Corrective Maintenance Spare Parts Logistics ensures secure global supply of spare parts and maximum availability. The three-pillar concept allows for efficient spare parts storage in accordance with the customer's wishes. This dramatically reduces expenditure to maintain the customer's own stocks. Your Benefits ■ Lower up-front investment through reduction of onsite store ■ Asset optimization ■ Lower costs as a result of optimized storage, with a reduction in capital tied up and cost-efficient management of stores ■ Availability assured through the immediate provision of spare parts in the event of a (threatened) plant stoppage The Task When a defective component in an electrical, field or I&C system causes or threatens to trigger a plant stoppage, the operator must be confident that the spare parts urgently needed will be made available quickly. An extensive local store is therefore often maintained, involving considerable effort and expense yet without fully ruling out the risk of spare parts being unavailable. optimization to as little as 15 percent of their original volume. This in turn leads to a reduction in capital tied up and significantly lower consequential costs, since unnecessary and obsolete spare parts are not retained. On the other hand, the central store contains critical spare parts that are needed less frequently. A network of logistics partners ensures that these types of spare can reach any corner of the globe in the shortest possible time - under normal circumstances within the next working day, or as an immediate emergency delivery if required. The optimized spare parts logistics system guarantees exemplary response times, especially for rarely-needed spare parts. The operator's own extensive stock of spare parts on site then becomes more or less superfluous. Spare parts logistics – suitable stock levels tailored to meet all spare parts requirements. Our Solution The spare parts concept is based on three pillars: a strategic on-site store, a centrally managed Siemens store, and rapid and efficient logistics. The strategic on-site store is stocked in close consultation with the operators. This ensures that the critical spare parts are stored where they will also be needed in an emergency. The benefit is a significant reduction in the cost of initially filling the customer's own store, the contents of which can be reduced following Answers for energy. Published by and copyright © 2012: Siemens AG, Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany For more information contact service4plants.energy@siemens.com www.siemens.com/energy/service4plants Siemens Energy, Inc. Instrumentation, Controls, & Electrical 1345 Ridgeland Parkway, Suite 116 Alpharetta, GA 30004, USA SVCM3_FS_SP-Logis_e_V4-0 Order no. E50001-G230-A140-X-4A00 Printed in Germany Dispo 05401, c4bs-Nr. 7820 Printed on elementary chlorine-free bleached paper. All rights reserved. Trademarks mentioned in this document are the property of Siemens AG, its affiliates, or their respective owners. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which may not apply in all cases. The required technical options should therefore be specified in the contract.