PRESS RELEASE
May 2014
NEW HYSTER® FORKLIFT FOR METAL INDUSTRY
Hyster has launched a new 16-18 tonne capacity forklift series for tough metal
processing environments and storage applications.
"The metal industry has many unique handling challenges" says Norbert Brünell,
Senior Product Strategy Manager Big Trucks. "With a long load centre and 3.75m
wheelbase, the Hyster 16-18 tonne forklifts are a tough solution for handling hot
ingots, cold slabs or lengthy pipes."
The new Hyster® H16XM-12 provides 16,000kg lift at a 1,200mm load centre, while
the H16XM-9 offers a 900mm load centre. Similarly, for heavier 18,000kg
applications, Hyster has launched the H18XM-7.5 and H18XM-9 and all models are
available with specific metal industry customisations.
Hot steel handling
The first products to be handled by a forklift truck in the metal production process are
slabs, blooms, ingots and coils as they are casted, leaving the process at
approximately 900°C.
The load-sensing hydraulic system is set with industry leading cooling performance
so that the oil temperature stays below 90°C, even while running a full production at
45°c ambient temperature. This helps to prevent the hoses from becoming brittle and
prolongs the life of all components involved. When running at even higher ambient
temperatures there is a protection system that first warns the driver and will go into
de-rate to avoid overheating.
"Heat from direct contact with the product or from radiation seriously affects the front
of a forklift truck," says Norbert. "We have developed a series of options for the new
16-18 tonne models to protect the truck when handling heavy molten steel products."
PRESS RELEASE
Heat resistant hoses and hose sleeves help prevent hoses from drying out and
leaking, and a chainless Monomast option helps to overcome increased wear
associated with chains drying out in the heat. A heat shield extends the life of
cylinder seals, there is a front screen protection option and the Hyster carriage
features wear pads rather than roller bearings which would otherwise dry out and fail.
"For challenging foundry environments Hyster has one of the toughest heat
protection packages in the world to ensure that the forklift maintains a low cost of
operation and reliability throughout its life time," he says.
Storing slabs, blooms, billets or ingots
The strong Hyster mast design is an essential feature in typical metal storage sites
which are mostly unpaved and bumpy, and can sometimes cause "load bouncing"
when transporting long and heavy loads. The strong design and robust quality of the
Hyster truck, mast and carriage also helps when slab flipping and in other high shock
loads.
To overcome dust problems in steel yards there is the option to extend the precleaner air intake to get less polluted air as standard pre-filters are sometimes not
enough. There is an optional Hyster automatic greasing to push the dirt out and the
operator benefits from pressurized Vista cab with separate, easy to clean air filter.
Handling coils (steel band), wire coils, pipes, tubes and structural steel
There are multi-purpose, integral or hook-type, side-shift, fork positioning carriages
with a range of different "quick disconnect" fork and front-end attachments available
including rounded forks, grab clamps, C-hooks, pipe stabilisers, coil rams, long rams
or magnets.
Significant fuel savings
The new trucks have been developed using the latest technology from Hyster,
making it possible to achieve up to 25% fuel savings for metal customers, depending
on the specific application. The powerful and efficient 125kW (168hp) Cummins QSB
6.7 does not need a DPF or SCR system to meet the Stage IIIB emissions
legislations.
PRESS RELEASE
Hyster 16-18 tonne forklifts feature two operating modes. ECO-eLo mode optimises
fuel by reducing the maximum engine speed and uses smart throttle control to avoid
over-fueling the engine. HiP High Performance Mode is the standard operating
mode.
Accurate load sensing hydraulics
In addition to the Cummins engine technologies and ZF transmissions, Hyster has
optimised performance with cooling on demand and load sensing hydraulics (power
on demand) and other features. Operators benefit from accurate control with an “egg
shell” landing, helping to prevent damage such as coil bands snapping or saddle
damage.
"The hydraulic system is highly efficient delivering oil flow only when required. This
means it saves fuel, it runs quieter and helps extend the life of major components,"
he says. "In fact, the oil and filters last longer, and hoses, seals and components
wear less, prolonging their working life".
The high-performance power train is also highly reliable, featuring engine and
transmission protection, and the oil-immersed (wet) disc brakes help further support
a total lower cost of operation.
The mast is rigid and tough, yet offers enhanced visibility for the operator, giving a
clear view of the forks and load. Load-sensing power steering provides low-effort
operation and the smooth auto-shift transmission enhances operator comfort by
virtually eliminating jerk and provides true inching capability.
Part of the latest generation of the Hyster Big Trucks featuring the Hyster “Vista” cab,
the new trucks offer an outstanding range of standard ergonomic features, plus
excellent all-round visibility, to ensure ease of operation. For example, the steer tyres
are always visible which can help to prevent collision with coils or rails.
"For the driver, there is easy access, convenient controls and a spacious cab
providing a comfortable working environment in all weathers to increase and sustain
productivity," says Norbert.
PRESS RELEASE
Noise levels are reduced on the outside and cabin interior noise is among the lowest
in the industry, helping to enhance driver alertness and productivity.
"This truck is not only good for the operator, manager and financial controller, it is
easier to service and has longer service intervals," he adds. "It is an excellent
example of the power and strength that defines the Hyster brand."
All Hyster products are supported worldwide by a network of highly trained dealers
providing expert, responsive local service.
Visit www.hyster.eu.
ENDS – 953 Words
NOTES TO EDITORS
Hyster is one of the leading global brands of materials handling equipment offering over 140
models of counterbalance trucks, warehouse and container handling equipment. The
company invests heavily in research and development to ensure Hyster® products are at the
forefront of the materials handling industry providing maximum dependability and low costs of
ownership for demanding operations everywhere.
Hyster Company is part of NACCO Materials Handling Group, Inc. (NMHG), a wholly owned
subsidiary of Hyster-Yale Materials Handling, Inc. (NYSE:HY). Hyster-Yale Materials
Handling, Inc. and its subsidiaries, headquartered in Cleveland, Ohio, employ approximately
5,100 people worldwide, with 1360 in the EMEA region.
Visit www.hyster.eu for further information.
Issued on behalf of Hyster Europe by:
MOLOKINI MARKETING LTD
Press/Advertising contact : Nik Webb, Tel: +44 (0) 1903 207408
nik@molokini.co.uk | www.molokini.co.uk