CURRICULAM VITAE
VENKAT RAMANA GUPTA. P
Email: gupta25mech@gmail.com
Phone: +919543762491(Tamil Nadu)
+917506203522(Mumbai)
OBJECTIVE
To be a catalyst in a growing organization in promoting and optimizing
the overall growth of the concern that I am part of by virtue of my domain
Expertise customer care.
WORK EXPERIENCE:
1) Designation
: QC -welding inspector.
Organization
: BSI Steels,Qatar.
Duration
: May 2013 – May 2014.
Projects carried out :
Al bahadir-American maintenance hangar –QA 370
ALBADER Construction & Steel Works – QA378
Qatar Petroleum -QA 301 - CCC – GL
Ducto MC – Connell Do well (Qatar) LIC - QA376
Qatar Petroleum - Seashore Engg & Contracting WLL- QA382
Gulfmar Limited Company - IQ 317
HX Steel international Engg – QA -384
System inseat Ltd Sti – Houbora Breeding Station – QA 388
Gulf Panel –QA 399
2) Designation
: QC-ENGINEER (MULTI DISCIPLINE)
Organization
: Prathab Enterprises, India.
Clint
: NTPL-TUTICORIN THERMAL POWER PROJECT
Durations
: JUNE2010-APRIL2013.
Projects carried out : 2X500 MW (CIRCUTLATING FLUIDIZED BED COMBUSTION)
EDUCATION
2010
2007
B.E. degree in Mechanical Engineering, Mookambigai College of
Engineering, Pudukottai.
Affiliated to Anna University and secured an aggregate of FIRST
CLASS.
DME in Mechanical Engineering, SRINIVASA College of
Engineering, Pudukottai.
Affiliated to STATE BOARD and secured an aggregate of FIRST
CLASS.
Page 1 of 4
JOB RESPONSIBILITY IN BSI STEELS:





Responsible for the mobilization of production planning and material management
of work at site, with proper safety and quality measures, to meet the requirement
of progress of project.
Monitoring quality systems (AWS D1.1) & compliance with pre set standards,
troubleshooting and maintaining requisite documents to ensure complete inprocess quality & improvement in process capabilities.
Doing fit up inspection and welding inspection. In accordance to the drawing
specification and relevant codes.
Implementation and monitoring of QCP, method statements.
Implementation of Procedures, ITP & Method statement requirements in fabrication
and erection.

Monitoring Welding Progress, Weld Visual inspection of Pre fabrication.

Control Weld quality as per QC plan, Procedures and Standard. Maintain QC records.

Witnessing / inspection of fit up, welding.



Witnessing / inspection of Test heads and welder’s qualification test.
Welder performance monitoring and course correction based on RT reports.
Maintaining record of welder qualification, calibration of welding machine and
electrode ovens.
Before welding, performing fit-up inspection for proper root gap, groove angle,
root angle, root face, and checking the preheat temperature.
During welding, performing In-process inspection welding inspection such as
preheat and inter-pass temperature and proper cleaning between the weld beads.
After welding, doing the final visual inspection and marking for repair and
rectification.




Co-coordinating with external inspection agency as per requirement in site. Arranging
for conduct of MPT & UT for bevels and Weld joints as per ITP procedure.





Maintaining of welding, welder, calibration log on daily basis.
Monitoring and controlling of welding consumables.
Coordinating with client inspection team and project management team.
Knowledge in studying of structural Fabrication &Erection Drawings.
Plant and equipment are in a safe condition and adequate for the job.
Page 2 of 4
JOB RESPONSIBILITY IN PRATHAB ENTERPRISES:
 Established standard inspection procedure and launched the concept of quality to all








the members in the working environment resulting in remarkable increase in
productivity.
To receive the approved drawing from the Bharath Heavy Electricals limited (BHEL)
Engineering Dept
Material identification, welding consumable verification, visual inspection,
Dimensional check, welder qualification, welder training and performance monitoring.
Review of QC plan, co-ordinations, supervising, monitoring fabrication, installation,
inspection and quality control of elector static precipitator, pressure vessel
and
structural work, Stage inspection, final inspection & visual inspection.
Dimensions, tolerances, preparation, fit-up and alignment are in accordance with the
Approved drawings and standards.
Reviewing of NDT Reports and recommendation for repairs, liaising with client.
Man power planning and material Handling.
Co-ordination with client
Ensure all the documents are kept updated and are traceable.
ADDITIONAL QUALIFICATION
 CSWIP 3.1 – WELDING INSPECTOR
 WELDING TECHNOLOGY- INDIAN WELDING
SOCIETY
 CERTIFIED ASNT Level II
Ultrasonic testing (UT)
Radiography testing (RT)
Magnetic particle testing (MT)
Penetrate testing (PT)
COMPUTER SKILLS
Languages
: BASIC
Packages
: MS-OFFICE
Design Software
: AUTOCAD.
Page 3 of 4
PERSONAL DETAILS
Name
: P.Venkat ramana guptha
Father’s Name
: V.Prakasam
Gender
: Male
Marital Status
: Single
Nationality
: Indian
Pass port no
: H8847738 in India
Pass port issue date
: 04/08/2010
Pass port expiry
: 03/08/2020
Language Known
: English, Tamil, Telugu, Hindi.
Email ID
: gupta25mech@gmail.com
Address
: 39, Mudaliyuar Street, Woraiyur, Trichy,
Tamil Nadu - 620 003
Date of Birth
: 25-09-1988
DECLARATION
I hereby declare that the information furnished above is
true to the best of my knowledge.
Yours sincerely,
Place : TRICHY
P.VENKAT RAMANA GUPHA
Page 4 of 4