Price/Proposal No. 65– Disk Dated 5-01-2011
Prices and specifications subject to change without notice.
Marvel Manufacturing Company, Inc.
3501 Marvel Drive., Oshkosh, WI 54902
Phone (800) 472-9464 (920) 236-7200
Fax (920) 236-4156
Web Site: www.marvelsaws.com
Hercules S330/3-HV
STANDARD SPARTAN MODEL Hercules S330/3 SWIVEL HEAD, HIGH SPEED, HORIZONTAL,
METAL CUTTING BANDSAW WITH 3 H.P., 60 DEGREE MITER CUTTING, and HYDRAULIC VISE.
Capacity @ 90°: 12” H x 18” W Rectangle (300 x 460 mm), 13” Round (330mm)
Capacity @ 45°: 11” H x 12” W Rectangle (280 x 300 mm), 13” Round (330mm)
Capacity @ 60°: 11” H x 8” W ( 280 x 203 mm), 9.5” Round (240mm)
Blade: 13’ 6” L x 1” W x .035” T (4115 x 27 x 0.9 mm)
Blade Tension: Manual tension (30,000 psi) provides consistent square cutting accuracy.
Speed Range: Blade speed is variable through a precision balanced step pulley and heavy-duty worm gear
transmission. Blade speeds are 90, 140, 220 and 320 SFPM. The broad speed range allows for optimum cutting of
a large variety of materials.
Hydraulic Down Feed: Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting.
Settings are made at the operator’s control station.
Hydraulic Frame Return: The saw frame is raised hydraulically using a push button mounted on the
operator’s control panel.
Motors: Blade Drive: 3 H.P. (1.5kW). Hydraulic Pump: 1/2 H.P. (0.375kW) Coolant Pump Motor: 1/8
H.P. (0.09 kW). Machines are available with either 230 or 460 volt, 3 ph., 60 Hz. Electrics. Voltage must
be specified on original order. (208 volt requires a boost transformer part number V10/SP2095 for
$1,645.00 additional).
Blade Guides: Carbide Blade Guides provides reduced vibration, heat and blade stress providing
longer blade life and accuracies of + .002 per inch of cut material.
Chip Brush: Powered from the drive wheel of the saw, the brush changes speed with the blade to
assure that chips are being removed from each gullet, improving cutting performance and blade life.
Vise Jaw: Hydraulic vise design clamps and holds the work piece securely. The vise is operated by a
selector switch located on the operator’s control panel. Maximum vise opening is 18” (460 mm).
Swivel: The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum
miter cutting capability. The pivot shaft has sealed bearings for maintenance free operation, while a
pointer and angle scale (-60o TO + 45o ) make setup fast and easy. Stops are provided at -60 and +45
degrees.
Operators Control Panel: Operation of the machine is safe and convenient from the stand alone
operator’s control console. Control Voltage is 110V.
PRICE: Complete machine, ready to operate, including motors and controls…………$ 11,860.00
Machine Weight: 1800 lbs.
Machine Dimensions: 86.5” W x 82.5” L x 53.25” H
S330/3/HV - Page 2.
Other Standard Features:





16” Diameter Cast Iron Blade Wheels
30.5” Work Height
Built in Coolant System
6 Gallon Coolant Tank
Guide Arm with Dove Tail Slide
MATERIAL HANDLING CONVEYORS:
Extension Roller Table: S330/F055 5’ (1.5 m) long. Table is constructed from 3” x 4.1 lb./ft.
Channel with five 2.5” (63mm) diameter ball bearing rollers on 12” Centers and two track stands.
Track sections can be used on either the loading or discharge side of the machine.
PRICE……………………………………………………………………..………...……$
525.00
WARRANTY: Marvel Manufacturing Company, Inc. warrants to the original user for a period of TWO (2)
years from date of factory shipment, that every new Spartan metal sawing machine is free from defect in
material and workmanship. During that period, we will, at our option, repair or replace any part which,
upon examination, we find defective. Warranty coverage is for parts only. This warranty will not apply
to alterations or modifications made upon Spartan metal sawing machines without our written consent, or
to machines which have been subject to willful abuse.
Prices: F.O.B. Factory. All prices contained herein are subject to change without notice and are further
subject to an increase equal to the amount of any Federal, State or Local Tax that may be imposed.
Marvel Manufacturing Company, Inc.also reserves the right to make design changes and/or modifications
on machines without prior notice.
No officer, employee, representative or agent is authorized to bind the company to acceptance of any
order in the field. All orders are subject to acceptance by the company at its home office in Oshkosh,
Wisconsin. Delivery dates given are estimates only, based on prevailing conditions and available
information, and are subject to conditions and contingencies beyond our control.
Marvel Manufacturing Company, Inc. • 3501 Marvel Drive • Oshkosh, WI 54902 • U.S.A.
Phone: (920) 236-7200 (800) 472-9464 Fax: (920) 236-4156
www.marvelsaws.com
Sales & Service Centers/Warehouses
OSHKOSH, WI • 1 800 472-9464 • FAX: 1 920 236-4156
FT. WORTH, TX • 1 817 535-2183 • FAX: 1 817 531-1163
LONGVIEW, WA • 1 360 575-9917 • FAX: 1 360 575-9706
BIRMINGHAM, AL • 1 205 916-2828 • FAX: 1 205 916-2827
District Sales Managers and Technical Specialists in Major Cities