Matsuura Kikai Seisakusho Co., Ltd.
Company Overview
Corporate Philosophy
Company History
The Main Equipment
Business
Performance & Products
Company Overview
Name
Matsuura Kikai Seisakusho Co., Ltd.
Address
Headquarters
2-5-62 Minami-Tamiya
Tel
088-632-1056
Tokushima City Japan
Fax
088-632-5764
Foundation
1961
Establishment 1981
The Capital
\10,000,000
Employees
30
CEO
Main
Customer
YOSHIHIKO MATSUURA
JTEKT Corporation/NHK(Nihon Housou Kyoukai)
Matsuura Kikai Seisakusho Co., Ltd. works on conforming of the quality control
system for International Organization for Standardization (ISO). In September,
2000 the International Standard of the quality management system (ISO9001: 2000)
is acquired to our company. The system has been operated as the main quality control
system since then.
Corporate Philosophy
All the machines are supporting our daily life. They are the tools that are needed for everyone to spend
vividly daily life. All the staffs are doing their business with the universal idea in their mind every day.
Our company works on the metal mold design & process, equipment design & process, FA (Factory
Automation) system development, and also develops the broadcasting support system. Today, the technical
improvement is very fast developed; every member of us is learning the new technology every day in order to
correspond with the developing ages.
For customer of the ordering and using of our products, also the families of our staffs always feel richness of
the life. That is the wish of our company.
Company History
It was established as personal business that works in metal
fitting to tools, precise processing by Mr. Shinyichi. Matsuura
since 1961 at North Tamiya Tokushima city. The name of the
company was Touhou Kikai Seisakusho Co.
In July 1981, the company was moved to 2-5-62 Minami-Tamiya
Tokushima City 770-0004。 As a corporate business the name was
changed to Matsuura Kikai Seisakusho Co. And the CEO is Mr.
Yoshihiko Matsuura. In the May 1991, one more factory（Oujing
Factory） was established at 63-5 Oujing-Cyo Tokushima City.
And the design and the assembly department are established.
In October, 1992, It changed the name to Matsuura Kikai Seisakusho
Co. Ltd.
In September, 1997, The DNC communication software which is made
by our company Is certificated by creation law.
In September, 1999, the moving relay system is certificated by creation low.
In September, 2000, "ISO9001" Certification is certificated for our company.
In October 2000, the Tokushima new business grand prize; Communication
Technology Prize is received by our company.
In June, 2003, Industrial Prize was received
by our company from Tokushima Newspaper.
In May, 2006, "Thesis prize" was received from
Japan Design Society.
Main Equipment
Name
NC turning machine
MC
Cylinder grinding M/C
Wire cutting machine
Cylinder grind machine
grinding machine
Forming grind machine
Flat surface grinding
Drilling machine
Milling cutter
Circularity Measuring
Qt’y
3
3
1
1
2
3
1
3
1
1
1
instrument
instrument 1
3D /CAD/ Instrument
1
3 D measuring machine 1
Jig grinding machine
1
Maker
Okuma
Toyoda
Toyoda
Mitsubishi
Toyoda Sucyoda Inner
Ymada.
Okamoto
Okamoto
Yoshida
Ymazaki
Tokoyo Seimitsu
Shape measuring
Mitsutoyo Co., Ltd.
Mitsutoyo Co., Ltd.
Waida Co., Ltd.
Business content
Mechanical design, Manufacture,
Part processing
In the Matsuura Kikai Seisakusho Co., Ltd., from the technology section to
each project, design, and manufacture section, the accumulation of the
technology practice and experience are done repeatedly every day. We hope
that all the products are made by our company for the customer with the
high quality and safety performance. We consider that the equipment is the
same as food. For the customer's various requests, we do the best
design
with flexible and wide view consideration.
Business content
Mechanical design, Manufacture,
Part processing
In order to pursue the advanced technology
is easy to be used, our company executes all
the flow procedures of machine manufacture
that is dealt with to processing of parts, the
design of the main body of a machine and
construction of a producing system.
In the part processing technology which
influences the performance of the machine,
the precision and correctness are always
noticed. Since the machine assembly is
related with the productivity we are
continuing to improve the tact time shorter
in 0.1 second unit.
Moreover, the laborsaving machines have
been offered not only in Japan but also
to overseas. Some of them are exported to
North America, China, France,
Czechoslovakia, Thailand, and Malaysia etc..
Performance & Products
News car one-touch transmitter control system
Altitude data is added to a Japanese map and a transmission
point is discovered quickly.
The antenna angle can be rectified smoothly with an
inclination sensor according to the calculation of the theoretical
electric field intensity and the received electric field intensity.
The optimal transmission point of the car can be registered
with the GPS, speed sensor, and a gyroscope.
Delivery place :NHK Tokushima, Kitakyusyu, Hiroshima, Okayama, Matsue,
Yonago, Shimonoseki, Saga, Fukuyama, Tottori, Maebashi
Performance & Products
Transmission-via-satellite navigator
The azimuth and elevation angle of communications satellite can be displayed on
the monitor in real time from the present relay vehicle.
The most optimal position and direction of the relay vehicle can be understood.
Moreover, the place of the relay vehicle can be shown on the displaying map with
the prospect map function according to the skyscraper or geographical feature
data.
Delivery place:
NHK Technological bureau
Performance & Products
Urgent image sending-out equipment
This is sending-out equipment that can transmit the static picture and movie
that are taken by mobile phone with HDSDI. The exclusive software is requested
for the past format memory since the difference form of portable career.
But this sending-equipment is different from the past portable career, the picture
of the data list in memory can be red and shown on the monitor directly by easy
operation. The Hi-Vision can be attained with HDSDI output.
Delivery place:
NHK Oita
Performance & Products
InputOutput-4ch A/D board
The azimuth of the antenna platform is
controlled independently and automatically
without the outside PC.
The DC motor system is controlled with the
microcomputer and A/D board that is
developed by our company.
The processing speed and control are
improved by compact size and precision
measurement sensor.
Performance & Products
Helicopter auto- trailing antenna platform
FPU antenna direction automatic
adjustment system
Delivery place: Private sector television
Performance & Products
In addition, many communication facility control software have been
developed.
1. Moveable satellite capture support system
2. Heavens top camera control support
system
3. Relay navigation system
The control system is used not only by
sensor and PC control but also by A/D
board in order to make it easy to use
and become more compact.
Delivery place: NHK Kitakyusyu, Fukuoka, Oita, Maebashi