CableLabsSpecification Engineering Change (EC) Form
Project
EC TRACKING INFORMATION (Blue fields to be completed by CableLabs only)
DOCSIS
N Identifier CBI2.0-N-14.1139-1
Status
Affected Specification
ECR Date
ECO Date
ECN Date
ECN Effective Date
CM-SP-CBI2.0-I06-131003
3/5/2014
Comment Period End Date 3/19/2014
SEVERITY
3/19/2014
Comment Period End Date 4/2/2014
Non-Critical
4/2/2014
111
Critical
Cert Wave No
Overall Type of Change (Tech/Edit/Both) Technical
Version
1
CHANGE TYPE
Minor
Major
TO OBTAIN LATEST ISSUED SPECIFICATION WORD VERSION, CLICK HERE :
https://www.cablelabs.com/doczone/docsis/requirements/specs/current/issued/
TO SUBMIT EC, EMAIL COMPLETED FORM TO: docsis_ec@cablelabs.com
SPECIFICATION DOCUMENT DETAILS
Document EC is written against: CM-SP-CBI2.0 Issued Version # I-06
AUTHOR INFORMATION
Primary Author
Email
Company
Additional Contributors
First Karthik Last Sundaresan
k.sundaresan@cablelabs.com
CableLabs
Chris Donley, Garey Hassler ( CableLabs)
Title of EC
Date sent to CableLabs
Use 64 bit field for Byte Count and Packet Count parameters
2/28/14
Country
Phone
USA
3036613895
ENGINEERING CHANGE DOCUMENT DETAILS
EC REVISION HISTORY
Date of revised EC
Brief description of revision
DETAILED PROPOSED CHANGES
Sections Affected
REQs Affected
Table 3
No
Test Plans Affected
No
OTHER RELATED ENGINEERING CHANGES (LIST ALL THE APPLY)
The following EC(s) are recommended to be processed in conjunction with this document:
EC#
Title of EC
Affected Document
NOTE! IMPORTANT EC AUTHOR INSTRUCTIONS:
For an ECR to advance to ECO status:
- Requirements Affected section of the embedded DOCSIS-SpecDetailChange.docx must be completed.
- If applicable, the embedded TestPlanDetailChanges.docx must be completed.
For an ECO to advance to ECN status:
- If applicable, compiled MIB files and final Schema docs must be attached before requested changes can
move to ECN status and noted as attachments in the table directly below.
DOCSIS_Spec-TestPlan_EC-Form_10-2013.docx
1 of 2
In submitting the Engineering Change Request ("ECR"), the Author(s) [primary author, additional authors, and contributors], individually and as
an authorized representative of the Company, agrees that if CableLabs incorporates this ECR in whole or in part into the relevant Specification,
all intellectual property in the ECR shall be licensed royalty free, and without confidentiality, under the terms of the "Data Over Cable Service
Interface Specifications License Agreement" ("Contribution Agreement"). CableLabs may disclose the content of this ECR to CableLabs'
members and such others as is necessary for the development of CableLabs' specifications. Questions about the Authors' licensing of
intellectual property in this ECR submission may be directed to legal@cablelabs.com.
This Engineering Change has the following file(s) attached.
Type of Attachment(s) (Visio, Word, txt,
.yang, etc.)
File Name of Attachment(s)
DETAILED DESCRIPTION OF PROBLEM:
Packet Data Summary Report (PDSR) message is triggered based on a configurable timer. If this timer is not set
appropriately the Byte Count and Packet Count counters could overflow, resulting in inaccurate reporting of these
parameters once the timer expires.
Modify CBIS to specify: Use 64 bit field for Byte Count and Packet Count parameters.
CHANGE DETAILS FOR THE SPECIFICATION:
Complete Engineering Change details for the specification is contained in the following embedded file:
EChange_CBI2.0-13.
1139-1.docx
CHANGE DETAILS FOR THE TEST PLAN (ATP):
Complete Engineering Change details for the test plan is contained in the following embedded file:
DOCSIS-TestPlanDet
ailChanges.docx
End of Request
Additional Instructions to EC Author
Embed_Doc_TrkChg_
Instr.docx
DOCSIS_Spec-TestPlan_EC-Form_10-2013.docx
2 of 2
In submitting the Engineering Change Request ("ECR"), the Author(s) [primary author, additional authors, and contributors], individually and as
an authorized representative of the Company, agrees that if CableLabs incorporates this ECR in whole or in part into the relevant Specification,
all intellectual property in the ECR shall be licensed royalty free, and without confidentiality, under the terms of the "Data Over Cable Service
Interface Specifications License Agreement" ("Contribution Agreement"). CableLabs may disclose the content of this ECR to CableLabs'
members and such others as is necessary for the development of CableLabs' specifications. Questions about the Authors' licensing of
intellectual property in this ECR submission may be directed to legal@cablelabs.com.