January 23, 2016
Darryl Hudson
68 Bluegrass Drive
Aiken, SC 29803
(803) 649-6641
darryl@HudsonsCustomMachining.com
http://www.HudsonsCustomMachining.com
The following is a partial list of items I have in stock. I am adding to this list almost daily. If you
don't see what you need please email, call, or write with questions.
BRUSH CAPS AND BRUSHES:
Various brush caps and brushes in stock, call or write for specifics. Custom orders with few days
notice. Items below normally in stock:
BRUSH CAPS PRICE ORDER #
***Also search for brush caps under manufacturer’s name. Not all brush caps are listed here.***
Breezer, 8” stationary ………………………………$24.00/pr.# BBC01
Dayton, type 22……………………………………..$24.00/pr.# DBC01
Diehl, tab foot/ornate base…………………………$24.00/pr.# DBC02
Eck, 8” stationary tab base………………………….$33.00 pr.# EBC1
Emerson, Duplex Gyro Fan…………………………$44.00 pr.# EBC2
Emerson, Northwind 44…………………………….$40.00/pr. # ENBC2
Emerson, Northwind 450……………………………$40.00/pr. # ENBC1
Fidelity, 8” wire yoke mount………………………..$24.00/pr.# FBC01
Ft. Wayne, 8” ball motor “Woods System”…………$24.00/pr.# FW01
GE, DC all brass, blk delrin w/ steel spring guide pin$65.00/pr.# GEBC02
GE, DC, blk delrin w/ protruding brass pin………..$55.00/pr.# GEDC03
GE, BMY DC, blk delrin w/ no protruding pin…….$40.00/pr.# GEDC04
Hamilton Beach, models 30 & 33………………….$24.00/pr.# HBBC1
Hamilton Beach, model 27………………………….$24.00/pr.# HBBC2
Hamilton Beach, model 25…………………………$24.00/pr# HBBC3
Hamilton Beach, model 18………………………….$24.00/pr.# HBBC4
Hamilton Beach, model 10………………………….$24.00/pr.# HBBC5
Hunter, (GE) 220V DC, SMY, & Loop Handle osc. $40.00/pr.# GEBC01
Jandus, all brass…………………………………….$24.00/pr.# WHBC1
Marelli, 12” round ball motor w/ flowers, tab base….$60.00/pr.# MBC05
Menominee, clamshell type 150 &164……………..$24.00/pr.# MBC04
Menominee, 8” stat., 4 cast struts, early type motor$35.00/pr.# MBC06
MESCO, ball motor brush caps, 110V DC ball motor$50.00/pr.# MBC03
Myers, malt mixer brush cap……………………….$40.00/pr# MMBC1
Mysto, (Gilbert), fits 6” model w/ open front cage…$50.00 pr.# GMBC1
Peerless, 10" front osc………………………………$22.00/pr. # PBC01
Peerless, 110V DC motor, Style EE127…………….$55.00/pr.# PBC02
Peerless, Style AA18 motor…………………………$60.00/pr.# PBC03
R&M/Western Electric Tank Motors……………….$40.00/pr. # RMBC1
R&M, 8” DC motor w/ open exposed commutator…$55.00/pr.# RMBC8
R&M, 8” List #2835, 32V………………………….$24.00/pr.# RMBC2
R&M, List # 6000, AC/DC model………………….$45.00/pr.# RMBC3
R&M, List # 1500 & 1505………………….……….$55.00/pr.# RMBC7
R&M, 6” brass & brass, List # 2800…………………$50.00/pr.# RMBC6
R&M, 10” five blader, List #2610…………………..$45.00/pr.# RMBC4
R&M, 10” B/S, List # 2203…………………………$45.00/pr.# RMBC5
Western Electric, tank motor (by Westinghouse)…..$40.00 pr.# RMBC1
Westinghouse, all brass……………………………..$24.00/pr. # WHBC1
BRUSH CAPS (cont.)PRICEORDER #
***Also search for brush caps under manufacturer’s name. Not all brush caps are listed here.***
Westinghouse, 10” Style #2728540, DC model…….$24.00 pr.# WHBC4
Westinghouse, gyro………………………………….$24.00/pr. # WHBC1
Western Electric, Tank Motor (by Westinghouse)…..$40.00 pr.# RMBC1
Westinghouse, all brass……………………………..$24.00/pr. # WHBC1
Westinghouse, 10” Style #2728540, DC model…….$24.00 pr.# WHBC4
Westinghouse, gyro………………………………….$24.00/pr. # WHBC1
Westinghouse, DC tank motor, brass, 5/16-18 thread$50.00/pr.# WHBC5
Westinghouse, DC tank motor, blk. delrin, no thread$40.00/pr.# WHBC7
Westinghouse, vane oscillator……………………….$24.00/pr.# WHBC2
Westinghouse, Whirlwind, (½” head dia)style 98926B$24.00/pr.# WHBC3
Westinghouse, Whirlwind, (5/16” head dia.)……….$24.00/pr.# WHBC6
FEET, RUBBER:
STEM DIA.STEM LENGTHFOOT DIA.FOOT THKNESS PRICE ORDER #
.250" (1/4”).250" (1/4”).500" (1/2”).218" (7/32”).60 ea. # FR01
.281" (9/32”).218" (7/32”).562" (9/16”).157" (5/32”).70 ea. # FR02
.312" (5/16”).250" (1/4”).625" (5/8”).312" (5/16”).70 ea. # FR03
.375" (3/8”).375" (3/8”).750" (3/4”).125" (1/8”).70 ea. # FR04
.406" (13/32”).312" (5/16”).625" (5/8”).093" (3/32”).70 ea. # FR05
.500" (1/2”).281" (9/32”).750" (3/4”).125" (1/8”).70 ea. # FR06
FEET, OTHER REPLACEMENT:PRICEORDER #
Dayton, tab base, blk delrin foot insert w/ rubber pad……$35.00/set of 3# FR11
Eck, Hurricane replacement feet, blk. Delrin w/ rubber pad $38.00/set of 4# FR09
Emerson, replacement rubber feet for step base fans………$5.00/set of 4# ERF7
GE, A-23 two bulb model heater feet, blk. Delrin………$25.00/set of 4# GEA23A
GE, pedestal fan feet (delrin), C’bored hole for screw…………$28.00/set of 4# FR07
Menominee, bank teller replacement feet, rubber, 5/8” OD………….$1.50 ea.# FR12
Menominee, feet, 8” tab base, blk. Delrin w/ rubber pad……$35.00/set of 3# FR10
R&M, lollipop replacement feet, blk. Delrin w/ rubber pad……$35.00/set of 3# FR08
GROMMETS, PRESS IN:
PRICE ORDER #
GE, pancake, 1903-07, pwr. cord, black Delrin………………………$ 8.00 # GEPC10
GE, pancake, 1903-07, pwr. cord, ebony wood (as orig.)…………$13.50 # GEPC11
GE, pancake, 1903-07, head wire, black Delrin……………………$10.00 # GEPC12
GE, pancake, 1903-07, head wire, ebony wood (as orig.)…………$16.00 # GEPC13
GROMMETS, RUBBER:
Note: The following grommets have a groove width of 1/16" and will fit stamped steel type fans.
GROOVE WIDTH GROOVE DIAHOLE SIZETHK.O.D. PRICE
.062" (1/16”).250" (1/4”).125" (1/8”).218".343"$0.50 ea # 062250
.062" (1/16”).375" (3/8”).250" (1/4”).187".500"$0.50 ea# 062375
.062" (1/16”).437" (7/16”).250" (1/4”).187".625"$0.50 ea# 062437
.062" (1/16”).500" (1/2”).375" (3/8”).281".687"$0.60 ea # 062500
.062" (1/16”).562" (9/16”).437" (7/16”).250".750"$0.70 ea# 062562
ORDER #
GROMMETS, RUBBER (cont.):
Note: The following grommets have a groove width of 1/8" to 3/16" and will fit cast iron type fans.
GROOVE WIDTHGROOVE DIA. HOLE SIZETHK.O.D. PRICE ORDER #
.125" (1/8”).312" (5/16”)
.187" (3/16”) .250".437" $0.60 ea # 125312
.125" (1/8”).406" (13/32”).265" (17/64”).375".625" $0.60 ea# 125406
.125" (1/8”).437" (7/16”).250" (1/4”) .250".625" $0.60 ea# 125437
.125" (1/8”).500" (1/2”).312" (5/16”).375".750" $0.60 ea# 125500
.125" (1/8”).531" (17/32”).375" (3/8”).500".750"$1.75 ea# 125531
.125" (1/8”).562" (9/16”).312" (5/16”).375".812" $0.70 ea # 125562
.156" (5/32”).375" (3/8”).281" (9/32”) .343".625" $0.70 ea # 156375
.187" (3/16”).500" (1/2”).250" (1/4”) .437".625" $1.25 ea # 187500
GROMMETS, SCREW-IN:PRICEORDER #
Emerson, large…………………………………………………………$ 6.00# ESG1
Emerson, small………………………………………………………..$ 8.00# ESG2
Menominee, large…………………………………………………..…$ 6.00# MSG1
Menominee, small……………………………………………………..$ 8.00# MSG2
R&M, tank motor, large……………………………………………….$ 6.00# RMSG1
R&M, tank motor, small………………………………………………$ 8.00# RMSG2
Westinghouse, tank motor, large……………………………………..$ 6.00# WHSG1
Westinghouse, tank motor, small…………………………………….$ 8.00# WHSG2
MISCELLANEOUS PARTS:PRICEORDER #
Adams Bagnall, oil cup for wire mount (not GE type motor)……$30.00 ea.# ABOC1
Adams Bagnall, C frame, arm to slot guide screw…………………$55.00 ea.# ABJ01
Breezer, brush caps for 8” stationary fan……………………………$24.00 pr.# BBC01
Carleton, oil cup for 6” fan…………………………………………….$30.00 ea.# COC1
Carleton, oil cup for 8” Ball Motor………………………………….$33.00 ea.# CBMO1
Carleton, 8” ball motor oil cup holder (screws into motor housing
under shaft)…………………………………………………..………..$45.00 ea.# CBM02
Carleton, motor stud, for 8” ball motor……………………………$28.00 ea.# CBM03
Century, S3 gearbox shaft w/ ball detents, model 152…………$128.50 ea.# CGS01
Century, oil cup (complete w/ wick tube & spring) for model #351$50.00 ea.# COA1
Century, oiler (compl assy w/ wick,tube & spring) for S3 model…..$95.00 ea.# COA2
Colonial, arm to wheel shoulder screw for tab base, LH thread..$30.00 ea. #CSS01
Commandaire, arm/wheel shoulder screw for 10” cat#2405, LH thread$16.00 ea.# CSS02
Commandaire, arm/neck shoulder screw for 10” cat# 2405……$16.000 ea.# CSS03
Dayton, brush caps for 8" tab base, Type 22 model………………$24.00 pr.# DBC01
Dayton, tab base, blk delrin foot insert w/ rubber pad…………$35.00/set of 3# FR11
Diehl, Aristocrat 10”, arm to wheel shoulder screw, steel……$20.00 ea.# DSS03
Diehl, bearing for ornate tab base, barrel-shaped O.D……………$40.00 ea.# DB01
Diehl, brush caps for 1906 tab foot/ornate base fan……………$24.00 pr.# DBC02
Diehl, oil cup for 1906 tab foot/ornate base fan……………………$36.00 ea.# DOC1
MISCELLANEOUS PARTS (cont.):PRICEORDER #
Diehl, oil cup holder/bushing for ornate tab base fan, c.1906……$44.00 ea.# DOC2
Diehl, Pullman coach car 8" fan oiler, complete……………………$88.00 ea.# DPC01
Diehl, Pullman coach car 10" fan oiler complete…………………$88.00 ea.# DPC02
Diehl, Pullman coach car oiler screw, fits above shaft, brass……$18.00 ea.# DOS1
Diehl, Pullman coach car yoke to motor shoulder screw, brass…$22.00 ea.# DSS01
Diehl, Style #F16512 shoulder screw, brass………………………$15.50 ea.# DSS02
Eck, brush caps for 8” stationary tab base fan……………………$33.00 pr.# EBC1
Eck, Hurricane osc. front bearing (AC model-blue tag)……………$40.00 ea.# EOB1
Eck, Hurricane, osc. rear bearing (AC model-blue tag)……………$40.00 ea.# EOB2
Eck, Hurricane osc. front bearing (DC model-red tag)……………$40.00 ea.# EOB3
Eck, Hurricane, osc. rear bearing (DC model-red tag)………………$40.00 ea.# EOB4
Eck, Hurricane stationary front bearing (AC model-blue tag)………$40.00 ea.# ESB1
Eck, Hurricane stationary rear bearing (AC model-blue tag)………$40.00 ea.# ESB2
Eck, Hurricane grease cup, complete……………………….……$105.00 ea.# ECK03
Eck, Hurricane osc., pinion gear, steel……………………………$145.00 ea.# EHPG1
Eck, Hurricane, replacement feet, Delrin w/ rubber pad……………$38.00 set# FR09
Edison, pwr. cord terminal hex locknut, brass……………………$10.00 ea.# TAE01
Edison, pwr. cord terminal thumb nut, knurled brass………………$18.00 ea.# TAE02
Edison, oiler drain plug thumbscrew, knurled brass (6 blade models)..$18.00 ea.# TAE03
Emerson, tripod (EI1) Oil Reservoir & Cap…………………………$110.00 ea.#ETOR1
Emerson, 1010 screw, fits rear motor housing, brass………………$20.00 ea.#ESS14
Emerson, 1500/11644 back motor housing screw for rear end of shaft$20.00 ea.# EMHS4
Emerson, 1500/11644 front rotor keeper, for front end of hollow shaft$16.50 ea.# EFRK1
Emerson, 1500/11644 pwr. term. binding post thumb nut, blk Delrin
w/ brass thread insert……………………………………..$37.00 pr.# EBPK1
Emerson, 1500/11644 rotor keeper shaft & washer………………$14.00 ea.# ERKS1
Emerson, 14644 back motor housing screw for rear end of shaft,
brass, slotted…………………………………………..$20.00 ea.# EMHS1
Emerson, 14644 brass rotor keeper, fits front of hollow shaft……$17.50 ea.# ERK1
Emerson, 14646 front rotor keeper, fits front end of hollow shaft $20.00 ea.# EHSC1
Emerson, 19646 back motor housing screw for rear end of shaft,
brass, slotted……………………………………………….$20.00 ea.# EMHS2
Emerson, 21646 osc. connecting arm link…………………………$40.00 ea.# EOA1
Emerson, 21666 osc. arm to wheel shoulder screw…………………$20.00 ea.# ESS1
Emerson, 26646 rear motor housing bearing plug, LH thread….$27.50 ea.# EMHS3
Emerson, 27645 osc. Arm to wheel shoulder screw………………$20.00 ea.#ESS11
Emerson, 73646 osc. arm to wheel shoulder screw………………$20.00 ea.# ESS2
Emerson, 29645 osc arm to wheel shoulder screw………………$20.00 ea.# ESS10
Emerson, 29646 osc. arm to wheel shoulder screw………………$20.00 ea.#ESS12
Emerson, acorn nuts, hex brass, set of 4……………………….$30.00/set of 4# EAN1
Emerson, arm to collar shoulder screw……………………………….$18.00 ea.# ESS8
Emerson, blade hub/rotor leather seal, fits 8" & 9” fans…………$ 3.00 ea.# ERS1
Emerson, blade hub/rotor leather seal, fits 12" & 16" fans…………$ 3.00 ea.# ERS2
Emerson, ceiling fan switch key, fits CF14, CF20, CF24, etc…….$75.00 ea.# ECF01
Emerson, ceiling fan key yoke, female part key fits into…………$45.00 ea.# ECF02
Emerson, ceiling fan lead oil seals, fits early Emersons c.'97-'10 $3.00 ea.# ECF03
Emerson, centrifugal switch insulator…………………………………$ 8.50 ea.# ECSI
Emerson, Duplex Gyro Fan brush caps……………………………….$40.00 pr.# EBC2
Emerson, Duplex Gyro Oiler, brass, complete w/ spring & wick…$75.00 ea.# EGF01
Emerson, fiber washers, rotor/hollow shaft………………………$00.33 ea. # EFW1
Emerson, Golden Jubilee, shoulder screw, arm to wheel…………$ 17.50 ea.# ESS3
MISCELLANEOUS PARTS (cont.):
PRICE
ORDER #
Emerson, hex bushing, LH thread, fits rear, guides worm shaft…$20.00 ea. # EHB1
Emerson, Jr arm to wheel shoulder screw……………………………$20.00 ea.# ESS9
Emerson, lever osc. arm to wheel top shoulder screw…………$22.00 ea. # ESS4
Emerson, lever osc. bottom left link shoulderless screw ………$16.00 ea. # ENS1
Emerson, lever osc. lower connecting link, to neck………………$25.00 ea. # EOA2
Emerson, lever osc. pinion gear, next to worm gear………………$25.00 ea.# EG01
Emerson, lever osc. top link shoulder screw………………………$20.00 ea. # ESS5
Emerson, Northwind 44 brush caps…………………………………$40.00 pr.# ENBC2
Emerson, Northwind 450 brush caps……………………………$40.00 pr. # ENBC1
Emerson, Northwind 450 shoulder screws, arm to wheel………$ 16.50 ea. # ESS6
Emerson, replacement rubber feet for step base fans………$ 5.00/set of 4 # ERF7
Emerson, screw-in grommet, large………………………………….$ 6.00 ea. # ESG1
Emerson, screw-in grommet, small………………………………….$ 8.00 ea. # ESG2
Emerson, Silver Swan (pedestal model) osc. link……………….$30.00 ea. # EOA3
Emerson, Silver Swan osc. link shoulder screw…………………$20.00 ea. # ESS7
Emerson, Silver Swan osc. drive shaft………………………………$50.00 ea.# ESDS1
Emerson, Silver Swan (pedestal) osc. drive shaft, steel, hex $50.00 ea.# ESDS2
Emerson, switch lever knob……………………………………………$28.00 ea.# ESK1
Emerson, switch screw & retaining nut (square nut)………………$32.00 ea.#ESS13
Emerson, tripod base pwr. term. binding post screw…………….$42.00/pr.# EBPK2
Emerson, tripod cage to motor screw, steel…………………………$14.00 ea.# ETS1
Emerson, yoke mount neck set screw, brass, goes into side of ball on
top of base, square threads…………………………………$24.00 ea.# ENS2
Eskimo, oil cup for 16” cob web cage w/ 3 prop cast alum blade$35.00 ea.# EOC1
Fueton-Bell Co., brush caps & brush holder, for Cyclone mixer…$85.00/pr.# FBBC1
FIBER WASHERS: Various sizes in stock, call for sizes and price.
MISCELLANEOUS PARTS (cont.) : PRICEORDER #
Fidelity, brush caps for 8” B/B wire yoke model…………………$24.00/pr.# FBC01
Fidelity, collar, spacer, small, brass…………………………………$20.00 ea.# FOC03
Fidelity, collar, spacer, large, brass…………………………………$20.00 ea.# FOC04
Fidelity, neck stub, brass, connects to arm………………………$28.00 ea.# FOC02
Fidelity, oiler, 12” lever osc., open gear model, 2 pc. oiler
complete w/ spring & wick……………………………..….$88.00 ea.# FOC07
Fidelity, pin, steel, to fit gear to shaft………………………………$11.00 ea.# FOC06
Fidelity, shoulder screw and hex nut, brass, for osc. link……….$28.00/set# FOC05
Ft. Wayne, brush caps, for 8” Woods system ball motor fan……….$24.00 pr.# FW01
Ft. Wayne, motor nuts, for 8” Woods system ball motor fan………..$9.00 ea.# FW02
GEARS: Custom made with some info. Various gears in stock, list on request. Call with specs for
price.
MISCELLANEOUS PARTS (cont.)
PRICE
ORDER #
GE, 1909 sidewinder, bull gear, large brass, 48 tooth……….$150.00 ea. # GESG1
GE, 1909 sidewinder, front bearing…………………………………$28.00 ea.# GEB01
GE, 1909 sidewinder, rotor shaft, pressed into your rotor……….$80.00 ea.# GERS1
GE, 1909 sidewinder, shoulder screw, lever linkage screw
(please define which one when ordering)…………………$28.00 ea. # GESS3
GE, 1909 sidewinder, shoulder screw for 48 tooth brass gear…..$28.00 ea.# GESS6
GE, 1909 sidewinder, shoulder screw for 48 tooth brass gear;
this one takes a 10-32 nut……………………………………...$28.00 ea.# GESS7
MISCELLANEOUS PARTS (cont.):
PRICE
ORDER #
GE, 1909 sidewinder, small pinion gear, 9 tooth………………$45.00 ea. # GESG2
GE, 1909 sidewinder, track ball for lever/fork…………………….$24.00 ea.# GETB1
GE, 1909 sidewinder, transmission engagement knob, brass……$95.00 ea.# GETK1
GE, 1909 sidewinder, transmission shaft w. dbl detent…………$125.00 ea.# GETS1
GE, 1909 sidewinder, yoke to neck screw, holds yoke to stem of neck..$ 28.00 ea.# GESN1
GE, 75423 loop handle osc. arm to wheel shoulder screw,
special RH thread………………………………………….…….$16.00 ea.# GESS1
GE, 75423 loop handle osc. arm to wheel shoulder screw,
special LH thread……………………………………………..$20.00 ea.# GESS2
GE, 75423/75425 motor screw, special thread, brass…………….$12.00 ea.# GEBS3
GE, 75423 loop handle rear bearing, (fixed, not self-aligning type),
for cast motor & base……………………………..…………….$45.00 ea.# GECB1
GE, 75423 gearbox wormshaft bushing, brass, large dia. set screw$25.00 ea.# GESS11
GE, #78X233 arm to wheel shoulder screw……………………….$20.00 ea.#GESS12
GE, A-23 two bulb heater replacement feet……………….$20.00/set of 4# GEA23A
GE, bearing set, front/rear………………………………………….$50.00 pr. # GESB1
GE, BMY bearing, front or rear, please specify when ordering….$35.00 ea.# GEBMB
GE, big motor oil cup, brass…………………………………………$33.00 ea.# GEBOC
GE, brush caps, for DC motor loop hndl osc., blk. Delrin w/ brass pin$55.00/pr.# GEDC03
GE, brush cap, for BMY DC fan motor, blk. Delrin w/ no pin……$40.00 pr.# GEDC04
GE, brush cap, for SMY DC and Loop Handle fan motor………$40.00 pr.# GEBC01
GE, brush cap, for all brass fans, blk delrin w/ steel spring guide pin$65.00 pr.# GEBC02
GE, cage to strut screws, 1/4-24 X 1/2, brass roundhead ……$ 9.00 ea. # GEBS1
GE, coin-op set screw for timing mechanism……………………$10.00 ea.# GESS4
GE, DC ball motor above bearing screw, brass………………….$20.00 ea.# GEDC02
GE, kidney osc. arm to wheel shoulder screw, steel…………….$24.00 ea.# GESS5
GE, oiler for DC ball motor model…………………………………$90.00 ea.# GEDC01
GE, 1894 Lynn Works Pancake, set screw for blade…………..$20.00 ea.#GELWP1
GE, 1894 Lynn Works Pancake Oiler, brass (not nickel plated).$90.00 ea.#GELWP2
GE, 1897 pancake, acorn nut, brass, not slotted………………$ 8.00 ea.# GEPC26
GE, 1897 pancake, oiler, complete w/ spring & wick…………..$95.00 ea.# GEPC25
GE, pancake acorn nuts, not slotted………………………….$ 8.00 ea. # GEPC07
GE, pancake acorn nuts, slotted………………………………..$ 9.50 ea. # GEPC08
GE, 12” pancake bearing…………………………………………$35.00 ea. # GEPC09
GE, 16” pancake front bearing, tapered OD…………………….$35.00 ea.# GEPC18
GE, 16” pancake rear bearing, tapered OD………………………$35.00 ea. # GEPC19
GE, 16” pancake bearing for the England made model by
GE Ltd., Wooten, England (different than USA model)……$40.00 ea.# GEPC16
GE, pancake, bearing screw, brass,
fits above bearing on front motor snout, 5/16-18 thread…$15.00 ea.# GEPC15
GE, pancake, bearing screw, brass,
fits above bearing on front motor snout, ¼-20 thread…….$14.00 ea.# GEPC23
GE, pancake, bushing, for base switch…………………………$12.00 ea.# GEPC24
GE, pancake grease cup, 1899 model, mounts above shaft…$75.00 ea.# GEPC21
GE, pancake grommet, 1903-1907 pwr cord, blk. Delrin………$10.00 ea.# GEPC10
GE, pancake grommet, '03-'07 pwr cord, ebony (as original). $14.00 ea. # GEPC11
GE, pancake grommet, 1903-1907 head wire, blk. Delrin………$10.00 ea.# GEPC12
GE, pancake grommet, 1903-'07 head wire, ebony (as original)$16.00 ea.# GEPC13
GE, pancake hex nuts, brass……………………………………$ 4.50 ea. # GEPC04
GE, pancake oil cups…………………………………………….$35.00 ea. # GEPC01
GE, pancake oil cup holder………………………………………$55.00 ea. # GEPC02
GE, pancake oil return slingee, brass (returns oil to the oiler). $40.00 ea. # GEPC29
GE, pancake oiler, complete with wick and spring……………$90.00 ea. # GEPC03
MISCELLANEOUS PARTS (cont.):
PRICE ORDER #
GE, pancake oiler for 16” “Made in England” model
by GE Ltd. of England, complete……………………………$90.00 ea.# GEPC17
GE, pancake rotor shaft, 5/16” dia., pressed/pinned to your rotor$65.00 ea.# GEPC22
GE, pancake rotor shaft, 3/8” dia., pressed/pinned to rotor $65.00 ea.# GEPC27
GE, pancake switch pointer holder (1903-08)……………………$20.00 ea.#GEPC30
GE, pancake switch shaft, steel, for 5 speed models
$50.00 ea. # GEPC28
GE, pancake terminal insulators, blk. Delrin w/ square hole……$35.00 pr.# GEPC14
GE, pancake terminal lug, threaded both ends w/ square mid section…$40.00 ea.# GEPC20
GE, pancake terminal thumb nuts……………………………….$14.00 pr. # GEPC05
GE, pedestal replacement feet, blk. Delrin, C'bored for screw……$45.00 set # FR07
GE, quiet blade oil cup, cat. # 55x165, polished SST looks like chrome$44.00 ea.# GEOC2
GE, set screw for early blade (special thread)…………………$10.00ea. # GEPC06
GE, star osc. neck swivel "star" knob, brass……………………$40.00 ea. # GESK1
GE, star osc. arm to wheel "star" knob, brass……………………$40.00 ea.# GESK2
GE, star osc. gearbox top star shaped knob for osc. engagement $40.00 ea.# GESK3
GE, star osc. connecting arm bushing (with flange)……………$24.00 ea.# GECAB1
GE, star osc., connecting arm bushing (without flange)………$24.00 ea.# GECAB2
GE, star osc. oil cup, brass…………………………………………$30.00 ea.# GEOC1
GE, star osc., screw, for strut to motor……………………………$ 9.00 ea.# GESS8
GE, star osc., screw, for cage clip (cage to strut)…………………$ 9.00 ea.# GESS9
GE, star osc. and brass bell crank osc gearbox cover screw….$12.00 ea.# GESS10
GE, strut to motor screw, 1/4-24 X 5/16” brass fillet head………$ 9.00 ea.# GEBS2
GE, Vortalex arm to wheel shoulder screw, LH thread………… $20.00 ea.# GEVS1
GLASS BEAD BLASTING: Call for my quote to strip your parts clean for professional looking
finishes.
MISCELLANEOUS PARTS (cont.)PRICEORDER #
Hamilton Beach, brush caps, fits #30 and 33 mixers/motors $24.00 pr.# HBBC1
Hamilton Beach, brush caps, fits #27 malt mixers/motors………$24.00 pr.# HBBC2
Hamilton Beach, brush caps, fits #25 mixers/motors……………$24.00/pr.# HBBC3
Hamilton Beach, brush caps, fits #18 mixers/motors……………$24.00/pr.# HBBC4
Hamilton Beach, brush caps, fits #10 mixers/motors…………….$24.00/pr.# HBBC5
Hamilton Beach, brush sleeve & insulator for #10 malt mixer $45.00/ea.# HBBS1
Hamilton Beach, replacement rubber feet for malt mixers….$5.00/set of 4# HBRF1
Hamilton Beach, oiler, for fan motor and home motor……………$80.00 ea.# HBO1
Hamilton Beach, motor mount screw for model #30 malt mixer…$30.00 ea.#HBMS1
Hunter, (by GE) brush caps for DC SMY, and Loop Handle osc…$40.00 pr.# GEBC1
Hunter/Century, arm to wheel shoulder screw, LH thread………$22.00 ea.# HSS01
Hunter, 5211 AdaptAir Ceiling Fan Blade Iron Screw, odd thread$25.00 ea.# HSS02
Hunter/Tuerk, switch housing nut, 7/8” dia. w/ 5/8” thread……$35.00 ea.# HTSHN
Jandus, all brass brush caps………………………………………$24.00 pr.# WHBC1
Lake Breeze, 16” Model A, bearing adjusting screw & nut………$45.00 ea.# LB001
Manhattan, #3 battery fan, oiler, complete w/ spring and wick,
ready to install……………..……………………………..$55.00 ea.# MBFO1
Manhattan, #3 battery fan, thumbscrew, for pwr. terminal……….$14.00 ea.# MBF02
Marelli, brush caps for 10” 220 V AC/DC yoke mount….$24.00 pr.# MBC01
Marelli, brush caps, 12” ball motor w/ flowers cast motor, tab base$60.00 pr.# MBC05
Marelli, brush caps, 360 degree oscillator…………………………$50.00 pr.# MBC07
MISCELLANEOUS PARTS (cont.):
PRICE ORDER #
Marelli, brush holder assembly for 10” universal 220V AC/DC.$85.00 pr.# MBC02
Marelli, oiler for dbl. head model, complete w/ spring & wick, $85.00 ea.# MOC01
Martinot, brush components, for star gear/pin drive osc……….$140.00 pr.# MAR01
Menominee, 8" ball motor bearing…………………………………$35.00 ea.# MBMB1
Menominee, 8" tab base neck shoulder screw and nut…………$32.00 set# MNSN1
Menominee, 8" tab base oiler plug, knurled brass………………$24.00 pr.# MOP01
Menominee, 12” ball motor, acorn nut, for strut to motor………$ 8.00 ea.# MBMB2
Menominee, bank teller fan brush caps, knurled brass……………$40.00 pr.# MBT01
Menominee, bank teller fan brush guides, brass…………………$22.00 ea.# MBT02
Menominee, bank teller fan feet, 5/8" OD……………………….$ 1.50 ea. # FR12
Menominee, 8” tab base feet, blk delrin w/ rubber pad…..$30.00 set # FR10
Menominee, bearing (front) for 12” snowflake fan,………………$35.00 ea.# MSB1
Menominee, bearing (rear) for 12” snowflake fan…………………$35.00 ea.# MSB2
Menominee, brush caps for clamshell type 150 & 164……………$24.00 pr.# MBC04
Menominee, 8” stat., 4 cast struts, early type motor……………$35.00/pr.# MBC06
Menominee, grease cup for clamshell motor, mounts over shaft$30.00 ea.# MGC01
Menominee, grommet, screw-in, large………………………………$ 6.00 ea.# MG01
Menominee, grommet, screw-in, small………………………………$ 8.00 ea.# MG02
Menominee, motor nut for vertical switch model, brass……………$ 9.00 ea.#MVS2
Menominee, shoulder screw for osc. arm to wheel connection….$30.00 ea.# MSS1
Menominee, shoulder screw (and hex nut) for osc. arm/neck base$30.00 ea.# MSS2
Menominee, tab base switch "ball shaped" knob, brass,
for early 9" w/ vert. switch knob………………………$40.00 ea.# MSK1
Menominee, feet for tab base, ½" tall, tapered, (set of 3)……$35.00/set of 3# MTF1
Menominee, feet for vert. switch tab base model w/ screws $55.00/set of 3#MVS1
Menominee, neck adjust screw for vertical switch model, knurled.$36.00 ea.#MVS3
Mysto, A.C. Gilbert, brush cap, fits 6” fans w/ open front cage$ 25.00 ea.#GMBC1
MESCO, ball motor brush caps, for 110V DC ball motor…………$50.00/pr.# MBC03
Myers, brush caps for malt mixer…………………………………$40.00/pr.#MMBC1
OIL CUPS: Custom made for your model fan, approx. $25.00 ea. (price may vary per complexity
of cup)
MISCELLANEOUS PARTS (cont.)PRICEORDER #
Peerless, bearing for Style OP3 motor…………………………………$40.00 ea.#PB01
Peerless, bearing for Style AA18 motor………………………………..$45.00 ea.#PB02
Peerless, brush caps, for 10” front osc……………………………$24.00/pr.# PBC01
Peerless, brush caps, for 110V DC motor, style EE127………….$60.00 pr.# PBC02
Peerless, brush caps for Style AA18 motor………………………….$60.00 pr.#PBC03
Peerless, arm to wheel shoulder screw, early tab base model. $33.00 ea. # PSS01
Peerless, arm to wheel shoulder screw, for tab base model $33.00 ea.# PSS02
Peerless, brush sleeve for Style AA18 motor……………………$55.00 ea.#PBS01
Peerless, oscillating wheel, aluminum, for 10” rear oscillator, B/S $52.00 ea.# POW1
Richmond Portable Battery Fan, oiler, complete w/ spring and wick,
ready to install…………………$55.00 ea.# RBFO1
Richmond Portable Battery Fan, rear shaft spacer……………….$10.00 ea.# RBF02
R&M, 8” model fiber switch lever…………………………………..$90.00 ea.#RMSL1
MISCELLANEOUS PARTS (cont.): PRICE ORDER #
R&M, arm to wheel shoulder screw for gearback tank motor……$20.00 ea.# RMSS2
R&M, arm to wheel shoulder screw for 12” osc., List #7804……$20.00 ea.# RMSS3
R&M, arm to wheel shoulder screw for List #23004,
for 12” overlapping blade model………………………….$20.00 ea.# RMSS1
R&M, brush cap for 8" List #2835 (32V)…………………………….$24.00 pr.# RMBC2
R&M, brush cap for List #6000 AC/DC model…………………….$45.00 pr.# RMBC3
R&M, brush cap for 10” five blader, List #2610……………………$45.00/pr.# RMBC4
R&M, brush caps for Tank Motor…………………………………….$35.00/pr# RMBC1
R&M, brush caps for 10” List #2203……………………………….$45.00 pr.# RMBC5
R&M, brush cap, 6” brass & brass, List # 2800………………….$50.00 pr.# RMBC6
R&M, brush cap for 8” DC model w/ open exposed commutator.$55.00 pr.#RMBC8
R&M, brush caps for DC Gearback Tank Motor osc………………$55.00/pr# RMBC7
R&M, flag badge, .010” (for 12” & 16” models)……………………$45.00 ea.# RMFB1
R&M, flag badge, .015” (for 12” & 16” models)……………………$45.00 ea.# RMFB2
R&M, front bearing for List #2242 30V DC Navy fan……………$30.00 ea.# RMB01
R&M, lollipop neck brush holder block (insulator)………………$60.00 ea.# RMBHB
R&M, lollipop feet, Delrin w/ rubber pad…………………………$28.00/set of 3# FR08
R&M, lollipop top bearing race………………………………………$85.00 ea.# RMBR1
R&M, oil cup for List #1404………………………………………….$30.00 ea.# RMOC1
R&M, Gearback Tank osc. wheel, steel (this is the one w/ the
spring tensioner)……………………………………………..$55.00 ea.#RMDS2
R&M, Gearback Tank osc. wheel drive shaft, (spring tension model)$50.00 ea.# RMDS1
R&M, Tank motor grease cup w/ plunger, brass, mounts above shaft$42.00 ea.# RMGC1
R&M, Gearback Tank osc. adjusting thumb wheel for osc. engagement$20.00 ea.# RMTW1
R&M, screw in grommet for tank motor, large………………………$6.00 ea.# RMSG1
R&M, screw in grommet for tank motor, small…………………….$8.00 ea.# RMSG2
RotoBeam, Yoke Thumbnut (holds cage upright), polished alum.$50.00 ea.#RBYT1
Sami, cannonball motor, brush inspection plug, brass……………$95.00 pr.# SAM01
Sami, cannonball motor, yoke friction washer, brass……………$45.00 ea.# SAM02
Sami, cannonball motor, screw for bottom plate…………………$14.00 ea.# SAM03
Sami, cannonball motor, screw for cage to strut…………………$14.00 ea.# SAM04
SPRINGS: for Oil Cups, custom wound, many sizes in stock,
let me know make/model…………………………….……$7.50 ea.# SCWO
MISCELLANEOUS PARTS (cont.)
PRICE
Toledo, candy scale leveling screw, brass
ORDER #
$50.00 ea.#TLS1
Trojan, all brass, oil cup, brass……………………………………$35.00 ea.#TOC01
Trojan, pancake bearing……………………………………………$35.00 ea. # TPCB1
Trojan, oil slingee, fits front snout of motor to catch oil, brass…$62.00 ea.# TPCS1
Tuerk, ceiling fan motor, grommet……………………………………$8.00 ea.# TCFG1
PLUGS, VINTAGE BAKELITE: Old style vintage, NOT REPROS ***Call for availability-supply is
dwindling for some styles***
Note: I recently acquired a large supply of NOS bakelite plugs, still in the original box with the
cardboard insulators. There are Eagle, General Electric, and Rodale brand plugs. My part
number below for these plugs is #VP06. Please specify which brand you’d like if you have a
preference when ordering #VP06.
Bakelite, black, half sphere, no neck, fluted or smooth………$call or email # VP01
Bakelite, brown, round w/ flared neck…………………………$call or email # VP02
Bakelite, brown, flat tee shape w/ straight neck……………….$4.00 ea. # VP03
Bakelite, ivory, flat tee shape w/ straight neck……………………$4.00 ea. # VP04
Rubber, black, heater type w/ straight neck………………………$4.00 ea. # VP05
Bakelite, brown, 1/2 sphere w/ scalloped or fluted sides, NOS $8.00 ea.# VP06
Bakelite, ivory, flared neck……………………………………………..$5.00 ea.# VP07
Bakelite, ivory, flat, no neck……………………………………………$4.00 ea.# VP08
Bakelite, brown, flat tee shape w/ flared neck………………………$4.00 ea.# VP09
Bakelite, ivory, flat tee shape w/ flared neck…………………………..$4.00 ea.# VP10
Bakelite, brown, flat, no neck………………………………………….$4.00 ea.# VP11
Bakelite, ivory, 1/2 sphere w/ scalloped sides, no neck, NOS……..$10.00 ea.# VP12
Porcelain, prongs turned “inline” (these fit some of the early screw in
attaching plugs)…………………………………………….$sold out# VP13
MISCELLANEOUS PARTS (cont.)
PRICE ORDER #
Veritys, ball motor osc., rear bearing, for “The Orbit” 16” osc……$32.00 ea.# VBE01
Veritys, ball motor osc., front bearing, for “The Orbit” 16” osc…$32.00 ea.# VBE02
Western Electric, all brass oil cup…………………………………$30.00 ea.# WEOC2
Western Electric, all brass oil cup holder…………………………$40.00 ea.# WHOC3
Western Electric, all brass oiler complete w/ wick………………$85.00 ea.# WHOC4
Western Electric, Bi polar oil cup, brass…………………………$35.00 ea.# WEOC1
Western Electric, bi polar rear bearing cap, brass………………$35.00 ea.# WERBC
Western Electric, bi polar strut screw, threaded ends w/ hex $24.00 ea. # WESS1
Western Electric, bi polar strut screw cap, slotted....................$11.00 ea. # WESS2
Western Electric, brush caps for tank motor……………………..$40.00/pr# RMBC1
Westinghouse, all brass brush caps……………………………….$24.00 pr. # WHBC1
Westinghouse, all brass brush holder/insulator…………………$50.00 ea.# WHBH2
Westinghouse, all brass oil cup……………………………………$30.00 ea.# WHOC2
Westinghouse, all brass oil cup holder……………………………$40.00 ea.# WHOC3
Westinghouse, all brass oiler complete w/ wick…………………$65.00 ea.# WHOC4
Westinghouse, dbl lever arm to neck shoulder screw, brass.....$20.00 ea.# WHSS5
Westinghouse, dbl lever arm to yoke shoulder screw, brass......$20.00 ea.# WHSS4
Westinghouse, brush caps for 10” Style #2728540 DC model…$24.00 pr.# WHBC4
Westinghouse, brush caps, for DC tank motor, polished brass..$50.00 pr.# WHBC5
Westinghouse, brush caps, for DC tank motor, no thread; pinned..$40/pr.# WHBC7
Westinghouse, cage clip screw for tank motor/dbl lever,………$10.00 ea.# WHS01
Westinghouse, dbl lever, wheel shoulder screw…………………$24.00 ea. # WHSS1
Westinghouse, dbl lever, arm shoulder screw…………………$20.00 ea. # WHSS2
Westinghouse, gyro, brush caps…………………………………$24.00 pr. # WHBC1
Westinghouse, gyro, brush holder assembly……………………$40.00 pr. # WHBH1
Westinghouse, pancake oiler, brass, complete w/ spring/wick$ 85.00 ea.# WHPC01
Westinghouse, pancake, bearing………………………………$45.00 ea.# WHPC02
Westinghouse, pancake vertical switch knob,.......................$40.00 ea.#WHPC03
Westinghouse, rear bearing cap for 1917 type osc., brass,
threaded & knurled………………………………$30.00 ea.# WHRB1
Westinghouse, Rotaire, geared ball detent shaft, steel w/ brass collar$145.00 ea.#WHRS1
Westinghouse, stamped steel motor end bell/stator screw, steel $ 3.50 ea.# WHSS3
Westinghouse, strut to motor screw for tank motor/dbl lever, choose
brass or steel………………………………….……$9.00 ea.# WHS02
Westinghouse, tank motor, acorn nut, brass, rounded version…$7.00 ea.# WHAN1
Westinghouse, tank motor oil cup, brass……………………..$30.00 ea.# WHOC1
Westinghouse, switch lever knob, tank motor, vane, dbl lever $30.00 ea.# WHSLK1
Westinghouse, switch cover (insulator), for tank motor, vane, dbl lever$15.00 ea.# WHSC1
Westinghouse, tank motor/vane screw-in grommet (large)…….$ 6.00 ea.# WHSG1
Westinghouse, tank motor/vane screw-in grommet (small)……$ 8.00 ea.# WHSG2
Westinghouse, tank motor/dbl lever yoke to motor shoulder screw brass$20.00 ea.# WHYS1
Westinghouse, vane osc., bushing, for vane rod bottom………$22.00 ea.# WHVB1
Westinghouse, vane osc., bushing, for cage top loop……………$22.00 ea.# WHVB2
Westinghouse, vane osc. brush caps……………………………$24.00 pr. # WHBC2
Westinghouse, vane osc., brush guide/insulator…………………$24.00 pr.# WHVB3
Westinghouse, vane Stops, 3 pc. Assy. (as orig.) steel & brass $110.00 pr.# WHVS1
Westinghouse, vane Stops, all one piece brass……………………$65.00 pr.# WHVS2
Westinghouse, Whirlwind brush caps, style 98926 B (1/2” head dia.)..$24.00 pr.# WHBC3
Westinghouse, Whirlwind brush caps (5/16” head dia.)…………$24.00/pr.# WHBC6
Westinghouse, Whirlwind oil cup, brass…………………………$30.00 ea.# WHOC5
White Cross (Lindstrom-Smith), oiler w/ nipple, brass…………$45.00 ea.# WCOC1
WICK MATERIAL:
White, 1/8" dia………………………………………………………….$3.50/ft. # WWM1
White, 3/16" dia………………………………………………………$4.00/ft. # WWM2
White, 1/4" dia……………………………………………………….$4.50/ft. # WWM3
MISCELLANEOUS PARTS (cont.) PRICEORDER #
Zeigler Electric Co., brush holder insulators, candlestick bipolar….$24.00 pr.# ZE01
Zeigler Electric Co., brush clamp terminal lug, candlestick bipolar..$22.00 ea.# ZE02
Zeigler Electric Co., power term. lug, brass, candlestick bipolar..$60.00 ea.# ZE03
Darryl Hudson
68 Bluegrass Drive, Aiken, SC 29803
(803) 649-6641
darryl@HudsonsCustomMachining.com
Ordering Information
Please complete the form below. Show Quantity, Description, Part number, and Price. Orders
under $50.00 please add $6.80 for priority postage. Orders over $50.00 please add $13.45 for
priority postage. Payment must accompany order in the form of a personal check, money order,
or cash. No credit cards. No Paypal. Please make check payable to: Darryl Hudson,
68 Bluegrass Drive, Aiken, SC 29803. If you are not 100% satisfied with any of my products,
please let me know and I will refund your money or swap it out, which ever you prefer. If you like
my products please tell others about them. If you do not like my products please tell ME!
Thank You.
QTYDESCRIPTIONPART NO.PRICE
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
Total for goods________
Shipping Charges________
Total________
Name: _____________________________________________________________
Address: ___________________________________________________________
City: ______________________________________________________________
State: __________________________Zip: ________________________________
Phone:_________________________Email:_______________________________