DSL-604+ Wireless ADSL Router
Product Features:
DSL-604+
1 ADSL Port, 802.11b+ WLAN, 4-port 10/100 Mbps Switch
Supports T1.413 issue 2, G.dmt, G.lite and G.hs standards
IPoA, PPPoA, 1483 Bridged Ethernet, 1483 Routed Ethernet,
PPPoE Support
NAT/DHCP
RIP1, RIP2 & Static Routing Support
PAP and CHAP authentication protocols
Built-in Firewall
Support MAC, IP Filtering
64, 128-bit WEP Wireless Encryption
Web-based, Telnet management
SNMP management agent base MIB
Hardware Installation
4 RJ-45 Fast Ethernet Switch Ports
RESET
Power
1 RJ-11 ADSL
Line Port
Status=Blinking WLAN=Blinking
ADSL Link=Steady ON
1.
Connect your PC to Ethernet Port of Router
2.
Plug-in Power Adapter
3.
Insert ADSL Line in to ADSL port
Ethernet=Steady ON
User Configuration
Configure Your PC to Fetch IP Address
Automatically from DHCP Server
(DSL-604+).
By Default DHCP Server is Enabled.
Enter ISP Primary & Secondary DNS
Servers.
Please Note the NEW Etisalat DNS:
213.42.20.20
195.229.241.222
NOTE: The Default IP Address of Router is 192.168.0.1.
And DHCP Server is Enabled.
Web Access
Access Router
Configuration by
Typing
http://192.168.0.1
In Web-Browser’s
Address Bar
Key-in
User Name/Password
as admin/admin
IP Configuration
Configuration Ethernet IP Address Change IP Address
As Per LAN
The Router’s Default IP address is 192.168.0.1 & Mask 24.
PPPoA Configuration
Configuration Multiple PVC Configuration
VPI: 0
VCI: 50
Encapsulation: PPPoA LLC
User Name: <INet UN>
Password: <INet Password>
Authentication: <PAP>
COD: Enable
PPPoA LLC
Public IP
Status
To Save
If Router is Connected to Internet “PPP Information” will show
Public IP address & Gateway assigned to Router by ISP
Wireless Configuration
Configuration Wireless Configuration The Router Offers 22Mps
Wireless Speed, 128-bit WEP
Encryption & MAC Filtering.
Wireless ID
There are total 13Channels.
The default Channel is 6.
Deny/ Allow
With Default Wireless Configuration D-Link Wireless Users Do Not
Need To Configure Their Systems
DHCP Configuration
Configuration DHCP Configuration on LAN Add
Pri. DNS: 213.42.20.20
Sec. DNS: 195.229.241.222
By Default DHCP Server is Enabled.
And Just need to add ISP Primary & Secondary DNS Server entries.
ISP DNS
NAT Configuration
Configuration NAT Configuration NAT Functions Should be
Enabled to allow Address
Translations for Public IP
Finally Save Changes & Reboot the router
Enabled