Phase_1_Low_Volt_Sub..

RE: Job: Olivet Nazarene University - Reed Hall Phase 1 Submittal No./Rev: ONU Reed Science Phase 1 Low Volt Submittals Description: Phase 1 Low Volt Submittals REVIEWED REVISE AND RESUBMIT REVIEWED AND COMMENTED Checking is only for conformance with the design concept of the project and compliance with the information given in the contract documents. Contractor is responsible for dimension confirmation and correlation at the job site, for information that pertains solely to the fabrication processes or to techniques of construction, and for coordination of the work of all trades involved in the project. ELARA ENERGY SERVICES 30 N. Wolf Road Second Fl - Hillside, IL 60162 BY: C.Harig DATE: 06-10-13 Notes: 1. Revise and Re-submit as indicated in attached list or submittals required. 30 North Wolf Road, Second Floor, Hillside, IL 60162-1900 • Phone: (708) 236-0300 • Fax: (708) 236-0330 Olivet Nazarene University Reed Hall – Phase 1 Material Submittal Review (May 23, 2013) June 10, 2013 CERTIFICATION & WARRANTY: 1. Certified Installation Contractor a. No Submittal 2. 20/Year Installation & Performance Warranty a. No Submittal PRIMARY MATERIAL LIST: (Section 27000 of Specifications) Section 271100 (Communications Equipment Room Fittings) 1. Network Data Rack (Four Post) a. No Exception Taken 2. Vertical Cable Management Section a. No Exception Taken 3. Cable Runway & Associated Items a. No Exception Taken 4. Plywood Backboard a. N/A 5. Ground Bar a. No Exception Taken 6. Cable Management Bracket a. No Submittal 7. Equipment Bonding a. No Submittal 8. Rack Mount Power Strip a. Resubmit with the specified power strip. 9. Uninterruptable Power Supply & External Battery Pack a. Resubmit and include the specified external battery pack. Section 271300 (Communications Backbone Cabling) 1. Fiber Optic Indoor Building Cable (Single-Mode) a. No Exception Taken Olivet Nazarene University – Reed Hall – Ph 1 Page #1 IT Material Submittal Review 2. Fiber Optic Rack Mount Connector Housing (1U) & Adapter Panels a. Enclosure i. No Exception Taken b. Single-Mode Adapter Panels i. No Exception Taken c. “Blank” Panels i. No Submittal 3. “LC” Fiber Optic End Connector a. Single-Mode i. No Exception Taken 4. Fiber Optic Patch Cord a. Provided by ONU IT Section 271500 (Communications Horizontal Cabling) 1. Horizontal Network Cable a. Voice i. No Submittal b. Data i. No Exception Taken c. Wireless Access i. No Exception Taken d. Security (Closed Circuit TV) i. No Exception Taken e. Camera i. No Exception Taken f. “Blackboard” Card Access & Vending i. No Submittal 2. Data Patch Panel a. Resubmit with specified patch panel. 3. Horizontal Cable Management Panel a. No Submittal 4. Wall Faceplates & Associated Modular Jacks a. Drop Location Faceplate i. No Exception Taken b. Wall Phone Drop Location Plate i. No Exception Taken Olivet Nazarene University – Reed Hall – Ph 1 Page #2 IT Material Submittal Review c. Tech Lab Wall Faceplate i. No Submittal d. Voice Outlet i. No Submittal e. Data Outlet i. No Exception Taken f. Wireless Outlet i. No Exception Taken g. Camera Outlet i. No Exception Taken h. Security Outlet (Closed Circuit TV) i. No Exception Taken i. “Blackboard” Card Access / Vending Outlet i. No Submittal j. “Blank” Dust Cover i. No Submittal 5. 110-Jack Panel System a. No Exception Taken 6. UTP Cat-6 Patch Cord a. Provided by Loyola IT 7. Flat Panel Connection Enclosure – A/V & Power a. No Exception Taken Section 271775 (Communications Cable & Jack Identification) 1. Labels a. No Submittal Section - Floor Boxes 1. “Type-F” Floor Box a. No Exception Taken Misc. Material Items Submitted 1. “PM-GS3-24” Patch Panel – (CommScope) a. There are no 24/Jack patch panels specified to be provided. 2. “SNMPWEBCARD” – (Tripp-Lite) a. No Exception Taken Olivet Nazarene University – Reed Hall – Ph 1 Page #3 IT Material Submittal Review 3. “M101SMB-B-246” Surface Mount Box – (CommScope) a. No Exception Taken (End of Section) Olivet Nazarene University – Reed Hall – Ph 1 Page #4 IT Material Submittal Review Olivet Nazarene University Reed Hall – Phase 1 Material Submittal Review (May 23, 2013) June 10, 2013 PRIMARY MATERIAL LIST: (Section 28000 of Specifications) Section 281300 (Access Control) 1. System Controller a. No Submittal 2. Card Reader a. No Submittal 3. Exit Sensor a. No Submittal 4. Magnetic Door Contract a. No Submittal 5. Wire & Cable a. No Submittal Section 281900 (Security Phones) 1. Emergency Wall Phone (EP-1) a. No Exception Taken 2. Emergency Phone Cable a. No Submittal Section 282300 (Video Surveillance) 1. Indoor Video Camera (Type-1) a. No Exception Taken 2. License (Camera Application Software) a. No Submittal 3. Camera Cable a. No Submittal (End of Section) Olivet Nazarene University – Reed Hall – Ph 1 Page #1 IT Material Submittal Review MIC® Tight-Buffered Cable, Riser 12 F, Single-mode (OS2) 223 Corning Cable Systems MIC® Riser Cables are designed for use in riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use 900 μm TBII® Buffered Fibers to enable easy, consistent stripping and facilitate termination. The fibers are surrounded by dielectric strength members and protected by a flame-retardant outer jacket. Corning Cable The all-dielectric cable construction requires no grounding or bonding. MIC Plenum cables are ideal for routing inside buildings, within plenum areas and riser shafts, to the telecommunications rooms and workstations. The MIC Plenum Cables meet the application requirements of the National Electrical Code® (NEC®) Article 770 and are OFNP and FT-6 listed. Features and Benefits 900 µm TBII® Buffered Fibers Easy, consistent stripping Part Number: 012E81-33131-24 All-dielectric construction Requires no grounding or bonding Flame-retardant jacket Rugged and durable Flame-Retardant Outer Jacket Ripcord Dielectric Strength Members Dielectric Strength Members Standards 1 1 Approval and Listings National Electrical Code® (NEC) OFNR, CSA FT-4, ICEA S-83-596 Flame Resistance UL-1666 (for riser and general building applications) 22.88 196683 115 Tight-Buffered Fiber Dielectric Strength Members 0 False Cross Section of Part Number: 012E81-33131-24 Specification Sheets 012E81-33131-24_NAFTA_AEN Page 1 | Revision date 2011-12-13 MIC® Tight-Buffered Cable, Riser 12 F, Single-mode (OS2) Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser Cable Type Tight-Buffered Product Type Distribution Flame Rating Riser (OFNR) Fiber Category Single-mode (OS2) Temperature Range Storage -40 °C to 70 °C (-40 °F to 158 °F) Installation -10 °C to 60 °C (14 °F to 140 °F) Operation -20 °C to 70 °C (-4 °F to 158 °F) Cable Design Central Element Yarn Fiber Count 12 Tight Buffer Color Blue, Orange, Green Tensile Strength Elements / Armoring - Layer 1 Dielectric strength members Tight Buffer Color, Layer 2 Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua Tensile Strength Elements / Armoring - Layer 2 Dielectric strength members Number of Ripcords 1 Outer Jacket Material Flame-retardant Outer Jacket Color Yellow Mechanical Characteristics Cable Max. Tensile Strengths, Short-Term 660 N (150 lbf) Max. Tensile Strengths, Long-Term 200 N (45 lbf) Nominal Outer Diameter 6.3 mm (0.25 in ) Weight 32 kg/km (22 lb/1000 ft) Specification Sheets 012E81-33131-24_NAFTA_AEN Page 2 | Revision date 2011-12-13 MIC® Tight-Buffered Cable, Riser 12 F, Single-mode (OS2) Mechanical Characteristics Cable Min. Bend Radius Installation 95 mm (3.7 in) Min. Bend Radius Operation 32 mm (1.3 in) Fiber Specifications Optical Characteristics (cabled) Fiber Core Diameter 8.2 µm Fiber Type Single-mode Fiber Category OS2 Fiber Code E Performance Option Code 31 Wavelengths 1310 nm / 1383 nm / 1550 nm Maximum Attenuation 0.65 dB/km / 0.65 dB/km / 0.5 dB/km Serial 1 Gigabit Ethernet 5000 m / - / - Serial 10 Gigabit Ethernet 10000 m / - / 40000 m * ITU-T G.652 D compliant Notes: 1) Improved attenuation and bandwidth options available 2) Bend-insensitive single-mode fibers available on request 3) Contact a Corning Cable Systems Customer Service Representative for additional information Ordering Information Order Number 012E81-33131-24 Product Description MIC® Tight-Buffered Cable, Riser, 12 F, Single-mode (OS2) Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Specification Sheets 012E81-33131-24_NAFTA_AEN Page 3 | Revision date 2011-12-13 Product Specifications 1071E LL 4/23 W1000 Material ID: 700212095 GigaSPEED® XL 1071E ETL Verified Category 6 U/UTP Cable, nonplenum, lilac jacket, 4 pair count, 1000 ft (305 m) length, WE TOTE® box Cross Section Drawing Construction Materials Conductor Material Bare copper Insulation Material Polyolefin Jacket Material PVC Separator Material Polyolefin Dimensions Cable Length 305 m | 1000 ft Cable Weight 25.60 lb/kft Diameter Over Jacket 5.893 mm | 0.232 in Jacket Thickness 0.559 mm | 0.022 in Electrical Specifications ANSI/TIA Category 6 dc Resistance Unbalance, maximum 5 % dc Resistance, maximum 7.61 ohms/100 m Mutual Capacitance 5.6 nF/100 m @ 1 kHz Nominal Velocity of Propagation (NVP) 69 % ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 3/3/2011 page 1 of 2 1/11/2012 Product Specifications 1071E LL 4/23 W1000 - Material ID: 700212095 Operating Frequency, maximum 300 MHz Operating Voltage, maximum 80 V Transmission Standards ANSI/TIA568C.2 | CENELEC EN 50288 61 | ISO/IEC 11801 Class E Dielectric Strength, minimum 1500 Vac | 2500 Vdc Environmental Specifications Environmental Space Nonplenum Flame Test Method CMG | CMR Installation Temperature 0 °C to +60 °C (+32 °F to +140 °F) Operating Temperature 20 °C to +60 °C (4 °F to +140 °F) General Specifications Brand GigaSPEED® XL | SYSTIMAX® Cable Component Type Horizontal Cable Type U/UTP (unshielded) Pairs, quantity 4 Jacket Color Lilac Conductor Gauge, singles 23 AWG Conductor Type, singles Solid Conductors, quantity 8 Ordering Note Not available in Europe, the Middle East, or Africa Separator Type Bisector Packaging Type WE TOTE® box Product Number 1071E Mechanical Specifications Pulling Tension, maximum 11 kg | 25 lb Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 3/3/2011 page 2 of 2 1/11/2012 Product Specifications 1071E RD 4/23 W1000 Material ID: 700212020 GigaSPEED® XL 1071E ETL Verified Category 6 U/UTP Cable, nonplenum, red jacket, 4 pair count, 1000 ft (305 m) length, WE TOTE® box Cross Section Drawing Construction Materials Conductor Material Bare copper Insulation Material Polyolefin Jacket Material PVC Separator Material Polyolefin Dimensions Cable Length 305 m | 1000 ft Cable Weight 25.60 lb/kft Diameter Over Jacket 5.893 mm | 0.232 in Jacket Thickness 0.559 mm | 0.022 in Electrical Specifications ANSI/TIA Category 6 dc Resistance Unbalance, maximum 5 % dc Resistance, maximum 7.61 ohms/100 m Mutual Capacitance 5.6 nF/100 m @ 1 kHz Nominal Velocity of Propagation (NVP) 69 % ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 3/3/2011 page 1 of 2 1/11/2012 Product Specifications 1071E RD 4/23 W1000 - Material ID: 700212020 Operating Frequency, maximum 300 MHz Operating Voltage, maximum 80 V Transmission Standards ANSI/TIA568C.2 | CENELEC EN 50288 61 | ISO/IEC 11801 Class E Dielectric Strength, minimum 1500 Vac | 2500 Vdc Environmental Specifications Environmental Space Nonplenum Flame Test Method CMG | CMR Installation Temperature 0 °C to +60 °C (+32 °F to +140 °F) Operating Temperature 20 °C to +60 °C (4 °F to +140 °F) General Specifications Brand GigaSPEED® XL | SYSTIMAX® Cable Component Type Horizontal Cable Type U/UTP (unshielded) Pairs, quantity 4 Jacket Color Red Conductor Gauge, singles 23 AWG Conductor Type, singles Solid Conductors, quantity 8 Ordering Note Not available in Europe, the Middle East, or Africa Separator Type Bisector Packaging Type WE TOTE® box Product Number 1071E Mechanical Specifications Pulling Tension, maximum 11 kg | 25 lb Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 3/3/2011 page 2 of 2 1/11/2012 Product Specifications 1071E YL 4/23 W1000 Material ID: 700211998 GigaSPEED® XL 1071E ETL Verified Category 6 U/UTP Cable, nonplenum, yellow jacket, 4 pair count, 1000 ft (305 m) length, WE TOTE® box Cross Section Drawing Construction Materials Conductor Material Bare copper Insulation Material Polyolefin Jacket Material PVC Separator Material Polyolefin Dimensions Cable Length 305 m | 1000 ft Cable Weight 25.60 lb/kft Diameter Over Jacket 5.893 mm | 0.232 in Jacket Thickness 0.559 mm | 0.022 in Electrical Specifications ANSI/TIA Category 6 dc Resistance Unbalance, maximum 5 % dc Resistance, maximum 7.61 ohms/100 m Mutual Capacitance 5.6 nF/100 m @ 1 kHz Nominal Velocity of Propagation (NVP) 69 % ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 3/3/2011 page 1 of 2 1/11/2012 Product Specifications 1071E YL 4/23 W1000 - Material ID: 700211998 Operating Frequency, maximum 300 MHz Operating Voltage, maximum 80 V Transmission Standards ANSI/TIA568C.2 | CENELEC EN 50288 61 | ISO/IEC 11801 Class E Dielectric Strength, minimum 1500 Vac | 2500 Vdc Environmental Specifications Environmental Space Nonplenum Flame Test Method CMG | CMR Installation Temperature 0 °C to +60 °C (+32 °F to +140 °F) Operating Temperature 20 °C to +60 °C (4 °F to +140 °F) General Specifications Brand GigaSPEED® XL | SYSTIMAX® Cable Component Type Horizontal Cable Type U/UTP (unshielded) Pairs, quantity 4 Jacket Color Yellow Conductor Gauge, singles 23 AWG Conductor Type, singles Solid Conductors, quantity 8 Ordering Note Not available in Europe, the Middle East, or Africa Separator Type Bisector Packaging Type WE TOTE® box Product Number 1071E Mechanical Specifications Pulling Tension, maximum 11 kg | 25 lb Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 3/3/2011 page 2 of 2 1/11/2012 PRODUCT DATA SHEET ADJUSTABLE RAIL QUADRARACK™ AND SERVERRACK KEY FEATURES • The rear mounting rails adjust in depth front-to-rear to match equipment mounting requirements • RMU spaces are marked and numbered on the front mounting rails; flip the mounting rails to change numbering bottom-to-top or top-to-bottom • Includes a Top-Mount Cable Waterfall Tray to manage cables; and (1) 7 RMU T-shaped cable guide which can be snapped onto the front or rear of the rack and aligns with each RMU space • Rack components are bonded together during assembly per TIA-942 • Stability and strength of a welded steel enclosure in an open mounting system • Open design for unrestricted airflow and easy access to equipment and cabling • Self-squaring assembly with welded front and rear frames reduces assembly time • EIA-310-D compliant mounting rails support 19” wide rack-mount equipment • Choose square-punched mounting holes for server equipment or threaded mounting holes for network equipment • Includes a Two Mounting Hole Ground Terminal Block for easy attachment to the telecommunication ground • Bay together easily to create multi-rack configurations • Use with any CPI cabling section • Vertical power strips attach to the side of the rack frame • Support large equipment on heavy-duty four-post shelves or on side-mounted equipment support rails • Side panels are available to cover the ends of the rack and/or cable managers • Ships flat on a pallet APPLICATIONS • The Adjustable Rail QuadraRack™ with EIA standard threaded equipment mounting holes supports large modular network or voice switches, routers and other network equipment in communications equipment rooms • The Adjustable Rail ServerRack with EIA standard square-punched equipment mounting holes supports rack-mount server and data storage equipment in data centers or computer equipment rooms • Use with shelves or rails to support large, heavy computer and data storage equipment RELATED ACCESSORIES • Universal Horizontal Cable Manager • Jumper Trays • Heavy-Duty Equipment Shelves and Rails • Vertical and Horizontal Power Strips • LCD Monitor + Shelf • Keyboard + Tray Top-Mount Cable Waterfall Tray Use to guide patch cords side-to-side or rack-to-rack. Included with every rack. Rear Mounting Rails Adjust in depth front-to-rear to match equipment mounting requirements RMU spaces marked and numbered Flip the mounting rails to change numbering to sTart at the top or bottom of the rack Grounding and Bonding Rack is bonded during assembly and includes a ground terminal block for bonding to the telecommunications ground The Adjustable Rail QuadraRack™ (ARQR) and the Adjustable Rail ServerRack (ARSR) provide a sturdy, feature rich solution for supporting rack-mount network, computer server and data storage equipment in data centers, computer equipment rooms and other IT facilities. Both racks offer the strength and stability of an enclosure in an open four-post mounting system that provides easy access to equipment and cabling. The front and rear frames are welded to speed assembly and increase strength. Four brackets connect the front and rear corners of the frames. Front mounting rails attach to the front frame in a fixed position and align with the front of the rack or can be reversed for recessed mounting to maximize side-to-side airflow through network switches. Rear mounting rails can be adjusted in depth even after the rack has been bolted to the floor and can be extended beyond the rear of the frame by 6” (150 mm). A second set of holes along the sides of the frame lets you add optional side-mounted equipment support rails and vertical power strips that are independent of the mounting rails and use no RMU space. The bottom of the rack is punched for easy floor attachment. Each rack will support up to 2,204 lb (1000 kg) of equipment. The Adjustable Rail ServerRack has square-punched mounting rails that let you change mounting hardware (cage nuts) to match specific computer server and data storage equipment mounting requirements. The Adjustable Rail QuadraRack has threaded mounting holes that speed installation of patch panels, fiber enclosures and network switches. Each RMU is marked and numbered on the front pair of mounting rails making it easy to locate and position equipment. The front pair of mounting rails may be mounted to allow RMU numbering to start at the top or bottom of the rack. Each rack is available in three heights and two depths and includes a Top-Mount Cable Waterfall Tray with adjustable radius drops to allow easy side-to-side routing for patch cords. Use with any CPI cabling section (vertical cable manager) or Cable Guide Kits to organize cables along the sides of the rack. Attach CPI Cable Runway to the top of the rack with J-Bolts, a Cable Runway Elevation Kit or a Cable Runway Mounting Bracket to support overhead premise cables. A side panel option is also available and can be mounted to CPI’s vertical cable management products. See reverse for product specifications and ordering information. Please contact CPI Technical Support for configuration assistance. 800-834-4969 techsupport@chatsworth.com www.chatsworth.com ADJUSTABLE RAIL QUADRARACK™ AND SERVERRACK PRODUCT DATA SHEET SPECIFICATIONS • Four-post frame with threaded or square-punched mounting rails used to support 19” wide rack-mount network, computer server and data storage equipment and shelves • For indoor use only, in environmentally controlled areas; may not be used outdoors, in industrial or harsh environments or in plenum spaces • Includes: - (2) Mounting frames, (4) horizontal braces, (2) front mounting rails, (2) rear mounting rails, (1) top-mount cable tray & (1) 7 RMU cable guide - Assembly hardware - (1) Two Mounting Hole Ground Terminal Block and Antioxidant Joint Compound - Adjustable Rail QuadraRack includes (50) #12-24 screws - Adjustable Rail ServerRack includes (50) #12-24 cage nuts and screws - Order installation hardware separately (P/N 40604-001 or 40604-003 for concrete floors) • Available Sizes: See dimensions and order table • Usable Equipment Space: See dimensions and order table • Equipment Support: - Front equipment mounting rails can be mounted flush to the front of the rack or recessed 2.95” (75 mm) - Rear equipment mounting rails attach at .98” (25 mm ) increments and are adjustable front-to-rear from 15” (380 mm) to “Max Rail Depth” in the order table - 19” wide, EIA-310-D compliant hole pattern, 1-3/4” high (44.45 mm) RMU, Universal hole pattern with 5/8”-5/8”-1/2” (15.9 mm - 15.9 mm - 12.7 mm) vertical hole spacing - Adjustable Rail QuadraRack has threaded #12-24 equipment mounting holes - Adjustable Rail ServerRack has square-punched .375” (9.53 mm) equipment mounting holes - RMU spaces are marked and numbered on the front mounting rails; rails can be mounted with numbers beginning at the top or bottom of the rack • Load Capacity: 2,204 lb (1000 kg) of equipment, evenly distributed over all four corners • Grounding and Bonding: - Rack components are bonded together during assembly per TIA-942 - Two ground connections (two pairs of M6 studs on 5/8” centers) are located at the front and rear of the rack on the bottom center of the frame - One ground terminal block is included with the rack • Certifications: 19” EIA-310-D compliant; UL Listed 60950 • Material: Steel • Construction: Welded front and rear frame, bolted assembly; ships unassembled, flat on a pallet • Finish: Epoxy-polyester hybrid powder coat paint available in black, gray or computer white ORDERING INFORMATION Adjustable Rail QuadraRack™ Description Part Number Rail Style RMU Rack Height (A) Rack Depth (B) Max. Rail Depth (C) 15251-X01 #12-24 Threaded 38 RMU 72” (1800 mm) 23.62” (600 mm) 29.52” (750 mm) 166 lb (75.3 kg) 15251-X03 #12-24 Threaded 45 RMU 84” (2100 mm) 23.62” (600 mm) 29.52” (750 mm) 185 lb (83.9 kg) 15251-X15 #12-24 Threaded 51 RMU 96” (2400 mm) 23.62” (600 mm) 29.52” (750 mm) 206 lb (93.4 kg) 15252-X01 #12-24 Threaded 38 RMU 72” (1800 mm) 35.43” (900 mm) 41.33” (1050 mm) 175 lb (79.4 kg) 15252-X03 #12-24 Threaded 45 RMU 84” (2100 mm) 35.43” (900 mm) 41.33” (1050 mm) 193 lb (87.5 kg) 15252-X15 #12-24 Threaded 51 RMU 96” (2400 mm) 35.43” (900 mm) 41.33” (1050 mm) 215 lb (97.5 kg) Adjustable Rail ServerRack Description Shipping Weight Part Number Rail Style RMU Rack Height (A) Rack Depth (B) Max. Rail Depth (C) 15253-X01 Square-Punched 38 RMU 72” (1800 mm) 23.62” (600 mm) 29.52” (750 mm) 166 lb (75.3 kg) 15253-X03 Square-Punched 45 RMU 84” (2100 mm) 23.62” (600 mm) 29.52” (750 mm) 185 lb (83.9 kg) 15253-X15 Square-Punched 51 RMU 96” (2400 mm) 23.62” (600 mm) 29.52” (750 mm) 206 lb (93.4 kg) 15254-X01 Square-Punched 38 RMU 72” (1800 mm) 35.43” (900 mm) 41.33” (1050 mm) 175 lb (79.4 kg) 15254-X03 Square-Punched 45 RMU 84” (2100 mm) 35.43” (900 mm) 41.33” (1050 mm) 193 lb (87.5 kg) 15254-X15 Square-Punched 51 RMU 96” (2400 mm) 35.43” (900 mm) 41.33” (1050 mm) 215 lb (97.5 kg) X=Color; 1=Gray, 2=White, 7=black. Rails are 19”EIA. Minimum Rail Depth is 15.00” (380 mm). DIMENSIONS Accessories: • Cable Management: Use vertical and horizontal cable managers, sold separately • Power Distribution: Use CPI vertical and rack-mount power strips, sold separately • Seismic Bracing: Use CPI bracing kits, sold separately 2 Shipping Weight ADJUSTABLE RAIL QUADRARACK™ AND SERVERRACK PRODUCT DATA SHEET ACCESSORIES FOR ADJUSTABLE RAIL QUADRARACK AND ADJUSTABLE RAIL SERVERRACK Equipment Support Rail Provides additional support for heavy rack-mount equipment. • Attaches to the side of the Adjustable Rail QuadraRack or ServerRack • Provides a .98”W (25 mm) front-to rear support surface for equipment • Does not interfere with RMU space • Supports 200 lb (90.7 kg) of equipment • Includes assembly and installation hardware • Available in gray, computer white or black Part Number Description Shipping Weight 15285-X01 15285-X02 For 23.62”D (600 mm) Racks For 35.43”D (900 mm) Racks 7 lb (3.2 kg) 11 lb (5.0 kg) X=Color; 1=Gray, 2=White, 7=Black. Do not use with Dual Vertical Power Strip Manager (34595-COX). Top-Mount Cable Waterfall Tray Use at the top of the Adjustable Rail QuadraRack and Adjustable Rail ServerRack to guide patch cords side-to-side or rack-to-rack. • One Top-Mount Cable Waterfall Tray is included with each rack; a second can be added to the rear of the rack • 6”W x 5.2”D (152 mm x 132 mm) with adjustable radius bends that align with the vertical cable manager • Made of steel • Available in gray, computer white or black Part Number Description Shipping Weight 15275-X01 Top-Mount Cable Waterfall Tray 14 lb (6.4 kg) Adjustable Depth Shelf X=Color; 1=Gray, 2=White, 7=Black Support heavy peripheral equipment in the Adjustable Rail QuadraRack or ServerRack. • 19”W x 1 RMU shelf with adjustable depth rear mounting brackets • Supports 200 lb (90.7 kg) of equipment • Solid or vented support surface; 17.68”W (449.1 mm) • Made of steel • Includes assembly hardware • Available in gray, computer white or black Solid Universal Horizontal Cable Manager 19” EIA rack-mount cable manager available in 1 RMU, 2 RMU and 3 RMU, single- and double-sided versions. Use above and below patch panels to guide cables to network ports. Part Number 30139-719 30130-719 30131-719 30529-719 30530-719 30531-719 Description Single-Sided, 1 RMU 4.96”D (126.0 mm) Single-Sided, 2 RMU 5.14”D (130.6 mm) Single-Sided, 3 RMU 5.14”D (130.6 mm) Double-Sided, 1 RMU 11.73”D (297.9 mm) Double-Sided, 2 RMU 11.73”D (297.9 mm) Double-Sided, 3 RMU 11.73”D (297.9 mm) Vented Shipping Weight 2 lb (0.9 kg) 3 lb (1.4 kg) 4 lb (1.8 kg) Part Number Shelf Depth 15245-X01 15245-X02 15245-X03 15245-X04 13.84" (351.5 mm) 20.73" (526.5 mm) 27.62" (701.6 mm) 34.51" (876.6 mm) 15255-X01 15255-X02 15255-X03 13.84" (351.5 mm) 20.73" (526.5 mm) 27.62" (701.6 mm) 34.51" (876.6 mm) Solid Shelf Min./Max. Rail Depth 15.75" (400 mm) - 21.65" (550 mm) 22.64" (575 mm) - 28.54" (725 mm) 29.53" (750 mm) - 35.43" (900 mm) 36.42" (925 mm) - 42.32" (1075 mm) Shipping Weight 10 lb (4.5 kg) 12 lb (5.4 kg) 15 lb (6.8 kg) 18 lb (8.2 kg) Vented Shelf 5 lb (2.3 kg) 6 lb (2.7 kg) 6 lb (2.7 kg) 15255-X04 Color is Black. 15.75" (400 mm) - 21.65" (550 mm) 22.64" (575 mm) - 28.54" (725 mm) 29.53" (750 mm) - 35.43" (900 mm) 36.42" (925 mm) - 42.32" (1075 mm) 10 lb (4.5 kg) 12 lb (5.4 kg) 15 lb (6.8 kg) 18 lb (8.2 kg) X=Color; 1=Gray, 2=White, 7=Black Equipment Mounting Hardware Jumper Trays Additional equipment mounting hardware. Use screws with the Adjustable Rail QuadraRack. Use cage nuts and screws with the Adjustable Rail ServerRack. 19” EIA rack-mount cable management tray available in 3.5” and 6” deep (89 mm and 150 mm) versions. Use above network switches to provide a side-to-side pathway for cables. Part Number Description Shipping Weight Part Number Description Shipping Weight 40605-001 40605-005 12637-001 12638-001 12639-001 Screws, #12-24, 50 Pack, Zinc Screws, #12-24, 50 Pack, Black Cage Nuts/Screws, M6, 25 Pk Cage Nuts/Screws, 10-32, 25 Pk Cage Nuts/Screws, 12-24, 25 Pk 1 lb (0.5 kg) 1 lb (0.5 kg) 1 lb (0.5 kg) 1 lb (0.5 kg) 1 lb (0.5 kg) 12183-719 13183-719 19”W x 2 RMU x 3.5”D (89 mm) 19”W x 2 RMU x 6”D (150 mm) 3 lb (1.4 kg) 4 lb (1.8 kg) Color is Black. Accessory list continued on Page 4 3 ADJUSTABLE RAIL QUADRARACK™ AND SERVERRACK PRODUCT DATA SHEET ACCESSORIES FOR ADJUSTABLE RAIL QUADRARACK AND ADJUSTABLE RAIL SERVERRACK Cable Guide Kit Organize cables as they enter the rack. • 7 RMU T-shaped cable guides snap onto the front or rear of the rack • The openings in between the T-shaped guides align with each RMU on the rack • Available in black Part Number Description Shipping Weight 15286-001 15286-003 15286-015 For 38 RMU Racks For 45 RMU Racks For 51 RMU Racks 5 lb (2.3 kg) 6 lb (2.7 kg) 7 lb (3.2 kg) Each kit includes guides for two corners of the rack. Fixed Equipment Mounting Rail An additional pair of equipment mounting rails like the pair included on the front of the rack. Attach to the rear rack frame to create a solution with two mounting depths — the depth of the rack and the depth of the rear adjustable rails (set between 15”D and the rack depth). • Attaches to the rear rack frame of the Adjustable Rail QuadraRack or Adjustable Rail ServerRack • Includes installation hardware • Available in gray, computer white or black Part Number Description Shipping Weight 15259-X01 15259-X03 15259-X15 15260-X01 15260-X03 15260-X15 Threaded, for 38 RMU Racks Threaded, for 45 RMU Racks Threaded, for 51 RMU Racks Square-Punched, for 38 RMU Racks Square-Punched, for 45 RMU Racks Square-Punched, for 51 RMU Racks 20 lb (9.1 kg) 23 lb (10.4 kg) 26 lb (11.8 kg) 19 lb (8.6 kg) 22 lb (10.0 kg) 25 lb (11.3 kg) Side Panel Used to cover the end of the rack and/or vertical cable managers at the end of a row on the Adjustable Rail QuadraRack or ServerRack. • Solid side panel matches the height and depth of rack • Made of steel • Available in gray, computer white or black X=Color; 1=Gray, 2=White, 7=Black Dual Vertical Power Strip Manager Use to attach two CPI Vertical Power Strips to the Adjustable Rail QuadraRack or ServerRack. • Supports two CPI 66.3”L (1684 mm) Vertical Power Strips side-by-side • Attaches to the side of the rear mounting rail • C-shaped bracket is 4.3”W x 1”D (110 mm x 25 mm) • Includes installation hardware • Available in black Part Number Description Shipping Weight 34595-C02 34595-C08 For 45 RMU Racks For 51 RMU Racks 10 lb (4.5 kg) 11 lb (5.0 kg) Note: Use CPI Vertical Power Strips for cabinets. Do not use with Equipment Support Rail (15285-XXX). Floor Installation Hardware Installation hardware for concrete slab floors. Racks should be attached to the floor. Threaded rod and other hardware is also available. Part Number Description Shipping Weight 40604-001 40604-003 Concrete Floor, 3/8” Hardware Concrete Floor, 1/2” Hardware 1 lb (0.5 kg) 1 lb (0.5 kg) Description Part Number Rack Depth Rack Height Shipping Weight 15270-X01 15270-X02 15270-X03 15270-X04 15270-X05 15270-X06 23.62” (600 mm) 23.62” (600 mm) 23.62” (600 mm) 35.43” (900 mm) 35.43” (900 mm) 35.43” (900 mm) 72” (1800 mm) 84” (2100 mm) 96” (2400 mm) 72” (1800 mm) 84” (2100 mm) 96” (2400 mm) 51 lb (23.1 kg) 57 lb (25.9 kg) 48 lb (21.8 kg) 63 lb (28.6 kg) 71 lb (32.2 kg) 60 lb (27.2 kg) X=Color; 1=Gray, 2=White, 7=Black Vertical Power Strip Distribute power to equipment on the rack. The Vertical Power Strip attaches to the side of the rack frame with included hardware kit. • Rated for 125/250 VAC and 16 AMP • One IEC320 C-20 power inlet and 20 IEC320 C-13 power outlets • 66.3”L (1684 mm), no circuit breaker, power cord not included • Optional power meter displays current use with a three digit digital display Part Number Description Shipping Weight 13179-721 13179-771 Power Strip with no Power Meter Power Strip with Power Meter 13 lb (5.9 kg) 13 lb (5.9 kg) Note: Other options are available. Use CPI Vertical Strips for cabinets. All products quoted are subject to availability based on manufacturing capacity and shipping dates should be considered estimates only. While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products. ©2008 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame and MegaFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, Simply Efficient, TeraFrame and QuadraRack are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. MKT-60020-378 08/08 P R O D U C T D ATA S H E E T EVOLUTION™ CABLE MANAGEMENT K E Y F E AT U R E S • Evolution™ Cable Managers have a distinctive look that matches the CPI TeraFrame™ Family of Cabinets for a single aesthetic in showplace data centers • Organize cables by rack-mount unit; the improved T-shaped cable guide design decreases deflection when loaded with cables, especially important when deploying Cat 6a cabling • Rounded edges on the cable guides and at the top of the cable manager protect cables as they enter or exit the storage space • The door on the vertical manager opens to the right or left with a single knob; the horizontal manager has an easy to use snap-on cover • The rigid vertical manager trough minimizes movement when installed on the end of a row of racks; solid construction with a full rectangular base supports large bundles of heavy cables • Openings in the back of single-sided and middle of double-sided and combination vertical managers allow cables to pass easily front-to-rear • Double-sided vertical managers have Movable Mid-Sections that allow for flexibility in the volume of cable management space provided in the front and rear portions of the cable manager • Various cable management accessories are available to divide the interior space and manage cable slack Movable Mid-Section Move forward, backward, up or down to allocate interior cable management space and position accessories where needed Door Latch Includes doors with a single latch Cable Management Fingers T-shaped plastic cable guides organize cables by rack-mount unit CPI Evolution™ Cable Management provides an engineered solution for managing high-density cabling applications on open two-post and four-post CPI Rack Systems, delivering increased performance to match the demands of data center applications. Featuring easy-to-use doors with styling that complements the CPI TeraFrame™ Family of Cabinets; Evolution™ Cable Management provides innovative interior features to help maximize the capacity and utility of vertical and horizontal cable management. A P P L I C AT I O N S • Create vertical and horizontal pathways for storing and organizing premise cables, patch cords, equipment cords and jumper cords on CPI two-post and four-post open Rack Systems USE WITH • Standard Rack • Universal Rack • QuadraRack™ 4-Post Frame • QuadraRack™ Server Frame • Adjustable QuadraRack™ (AQR) • Adjustable ServerRack (ASR) • Adjustable Rail QuadraRack™ (ARQR) • Adjustable Rail ServerRack (ARSR) R E L AT E D A C C E S S O R I E S • Fiber Segregation Kit • Cable Lashing Bar Kit • Cable Distribution Spools • Movable Mid-Sections • Saf-T-Grip® Reusable Straps Use vertical managers on the sides of racks to manage premise cables, patch cords and jumper cords. Vertical managers include plastic T-shaped cable guides with openings that align with each rack-mount unit on the rack. Rounded edges on the cable guides and the top of the manager protect cables as they enter or exit the interior storage space. On double-sided managers, Movable Mid-Sections allow personalized placement of Cable Distribution Spools and other cable management accessories to effectively route patch cords. Use accessory Fiber Segregation Kits to create a dedicated internal channel for fiber cabling or accessory Cable Lashing Bar Kits to anchor premise cables closer to the mid-sections to increase capacity. The Movable Mid-Sections can also be positioned for a 50/50, 40/60 or 60/40 front/rear split of the internal cable management space to match cabling requirements. The door is secured by a spring-loaded two-point latch controlled by a single knob; simply turn the knob on the right or left side of the door and pull to swing the door open or turn both knobs to remove the door. The door attaches to the base and top of the cable manager, not the cable guides, and opens wider than previous designs for better access to cables. Vertical managers are available in single-sided, double-sided and combination configurations in five widths and three heights to match cabling requirements. Combination managers have cable management fingers in the front and cable rings in the back. Use horizontal managers above and below patch panels and network switches to organize and store cables. Horizontal managers also include plastic T-shaped cable guides to organize patch cords and jumper cords as the cords enter and exit the manager to make individual equipment connections. The snap-on cover matches the door styling on the vertical manager. Swing the cover up or down to access cables; the cover stays in the open position while cabling. Horizontal managers are available in single-sided, 1U, 2U or 3U high configurations for 19 inch EIA-310-D compliant equipment Rack and Cabinet Systems. Combine CPI Evolution Cable Management with two-post and four-post open Rack Systems to create a custom solution that fits your exact needs. See reverse for product details. Contact CPI Technical Support or visit the CPI Website (www.chatsworth.com) for configuration assistance. +1-800-834-4969 techsupport@chatsworth.com www.chatsworth.com EVOLUTION CA BLE MA NA G EMENT P R O D U C T D ATA S H E E T S P E C I F I C AT I O N S • Vertical and horizontal cable managers for open two-post and four-post Rack Systems • For indoor use only, in environmentally controlled areas; may not be used outdoors, in harsh environments or in air-handling spaces • Evolution™ g1 Single-Sided Vertical Manager includes: - Contoured front door with easy-open knobs and vertical center feature in contrasting aluminum finish - Rigid cable manager with 1U spaced plastic T-shaped cable guides (fingers) - Three Fixed Accessory Panels at the back of the cable manager - Three large Cable Distribution Spools and Cable Distribution Spool Spacers included with 10”W (250 mm), 12”W (300 mm) and 15”W (380 mm) managers • Evolution™ g2 Double-Sided Vertical Manager includes: - Contoured front door with easy-open knobs and vertical center feature in contrasting aluminum finish - Rigid cable manager with 1U spaced plastic T-shaped cable guides (fingers) - Rear door with easy-open knobs and all black finish - Three Movable Mid-Sections - Three large Cable Distribution Spools and Cable Distribution Spool Spacers included with 10”W (250 mm), 12”W (300 mm) and 15”W (380 mm) managers • Evolution™ g3 Combination Vertical Manager includes: - Contoured front door with easy-open knobs and vertical center feature in contrasting aluminum finish - Adjustable rear cable rings with spin-open latches on the back side (no rear door/cover) - Three large Cable Distribution Spools and Cable Distribution Spacers included with 10”W (250 mm), 12”W (300 mm) and 15”W (380 mm) managers • Evolution™ Single-Sided Horizontal Manager includes: - Contoured front door with snap-hinges and longitudinal center feature in contrasting aluminum finish - Cable manager with plastic T-shaped cable guides (fingers) - Three 1.25”H x 2.12”W (31 mm x 53 mm) edge-protected oval cable pass-through ports at the rear of the 2U and 3U high cable manager • Ships in a single carton • Sizes: See ordering information at right • Cable Fill: See cable fill table at www.chatsworth.com/cablefill • Material: Steel and aluminum cable manager, plastic T-shaped cable guides • Construction: Welded and riveted body and door • Finish: Black epoxy-polyester hybrid powder coat paint O R D E R I N G I N F O R M AT I O N Part Number Evolution™ g1 Single-Sided Vertical Cable Managers Description H x W x D - in (mm) Shipping Weight lb (kg) 35511-701 72 x 6 x 13.2 (1828 x 150 x 335), Black 51 (23.1) 35511-703 84 x 6 x 13.2 (2133 x 150 x 335), Black 57 (25.9) 35511-715 96 x 6 x 13.2 (2438 x 150 x 335), Black 65 (29.5) 35512-701 72 x 8 x 13.2 (1828 x 200 x 335), Black 54 (24.5) 35512-703 84 x 8 x 13.2 (2133 x 200 x 335), Black 61 (27.7) 35512-715 96 x 8 x 13.2 (2438 x 200 x 335), Black 70 (31.8) 35513-701 72 x 10 x 13.2 (1828 x 250 x 335), Black 60 (27.2) 35513-703 84 x 10 x 13.2 (2133 x 250 x 335), Black 67 (30.4) 35513-715 96 x 10 x 13.2 (2438 x 250 x 335), Black 76 (34.5) 35514-701 72 x 12 x 13.2 (1828 x 300 x 335), Black 65 (29.5) 35514-703 84 x 12 x 13.2 (2133 x 300 x 335), Black 73 (33.1) 35514-715 96 x 12 x 13.2 (2438 x 300 x 335), Black 82 (37.2) 35515-701 72 x 15 x 13.2 (1828 x 380 x 335), Black 74 (33.6) 35515-703 84 x 15 x 13.2 (2133 x 380 x 335), Black 83 (37.6) 35515-715 96 x 15 x 13.2 (2438 x 380 x 335), Black 90 (40.8) Evolution™ g2 Double-Sided Vertical Cable Managers 35521-701 72 x 6 x 24.5 (1828 x 150 x 662), Black 35521-703 84 x 6 x 24.5 (2133 x 150 x 662), Black 83 (37.6) 94 (42.6) 35521-715 96 x 6 x 24.5 (2438 x 150 x 662), Black 107 (48.5) 35522-701 72 x 8 x 24.5 (1828 x 200 x 662), Black 90 (40.8) 35522-703 84 x 8 x 24.5 (2133 x 200 x 662), Black 101 (45.8) 35522-715 96 x 8 x 24.5 (2438 x 200 x 662), Black 116 (52.6) 35523-701 72 x 10 x 24.5 (1828 x 250 x 662), Black 98 (44.5) 35523-703 84 x 10 x 24.5 (2133 x 250 x 662), Black 110 (49.9) 35523-715 96 x 10 x 24.5 (2438 x 250 x 662), Black 125 (56.7) 35524-701 72 x 12 x 24.5 (1828 x 300 x 662), Black 105 (47.6) 35524-703 84 x 12 x 24.5 (2133 x 300 x 662), Black 118 (53.5) 35524-715 96 x 12 x 24.5 (2438 x 300 x 662), Black 134 (60.8) 35525-701 72 x 15 x 24.5 (1828 x 380 x 662), Black 115 (52.2) 35525-703 84 x 15 x 24.5 (2133 x 380 x 662), Black 129 (58.5) 35525-715 96 x 15 x 24.5 (2438 x 380 x 662), Black 147 (66.7) Evolution™ g3 Combination Vertical Cable Managers 35571-701 72 x 6 x 20.2 (1828 x 150 x 513), Black 61 (27.7) 35571-703 84 x 6 x 20.2 (2133 x 150 x 513), Black 68 (30.8) 35571-715 96 x 6 x 20.2 (2438 x 150 x 513), Black 77 (34.9) 35572-701 72 x 8 x 20.2 (1828 x 200 x 513), Black 64 (29.0) 35572-703 84 x 8 x 20.2 (2133 x 200 x 513), Black 72 (32.7) 35572-715 96 x 8 x 20.2 (2438 x 200 x 513), Black 82 (37.2) 35573-701 72 x 10 x 20.2 (1828 x 250 x 513), Black 70 (31.8) 35573-703 84 x 10 x 20.2 (2133 x 250 x 513), Black 78 (35.4) 35573-715 96 x 10 x 20.2 (2438 x 250 x 513), Black 88 (39.9) 35574-701 72 x 12 x 20.2 (1828 x 300 x 513), Black 75 (34.0) 35574-703 84 x 12 x 20.2 (2133 x 300 x 513), Black 84 (38.1) 35574-715 96 x 12 x 20.2 (2438 x 300 x 513), Black 94 (42.6) 35575-701 72 x 15 x 20.2 (1828 x 380 x 513), Black 84 (38.1) 35575-703 84 x 15 x 20.2 (2133 x 380 x 513), Black 94 (42.6) 35575-715 96 x 15 x 20.2 (2438 x 380 x 513), Black 102 (46.3) Evolution™ Single-Sided Horizontal Cable Managers 35441-701 1U x 19” EIA x 8.2 (208), Black 4 (1.8) 35441-702 2U x 19” EIA x 8.2 (208), Black 5 (2.3) 35441-703 3U x 19” EIA x 8.2 (208), Black 6 (2.7) Single-Sided 2 Double-Sided Combination Horizontal EVOLUTION CA BLE MA NA G EMENT P R O D U C T D ATA S H E E T ACCESSORIES Cable Distribution Spools Cable Lashing Bar Kit Cable Distribution Spools provide slack management and strain relief for patch cords and jumper cables inside Evolution™ Vertical Cable Managers. • Three large cable distribution spools are included with each 10”W (250 mm), 12”W (300 mm) and 15”W (380 mm) vertical cable manager, (will not fit in other sizes) • Attaches to the fixed adapter panels on the back of single-sided vertical cable managers and the Movable Mid-Sections inside double-sided vertical cable managers • Spools are 2.75” (69.9 mm) in diameter and 5.9”L (150 mm) and made from black plastic • Each kit includes four spools and mounting hardware Cable Lashing Bar Kit provides tie points for cables inside Evolution Vertical Cable Managers. • Use with any height Evolution Vertical Cable Manager • Attaches to the fixed adapter panel inside vertical cable managers • Use up to six cable lashing bars (front/rear) in 6”W (150 mm) vertical cable managers and up to ten cable lashing bars (front/rear) in 8”W (200 mm), 10”W (250 mm), 12”W (300 mm) and 15”W (380 mm) vertical cable managers • Each kit includes four round .23” (5.7 mm) diameter x 20.6”L (524 mm) steel lashing bars and mounting hardware Shipping Weight lb (kg) Part Number Description 15008-001 Cable Distribution Spools, Black 2 (0.9) Cable Distribution Spool Spacer Kit Part Number Description Shipping Weight lb (kg) 35473-001 Cable Lashing Bar Kit 2 (0.9) Zinc plated, silver colored. The Cable Distribution Spool Spacer Kit is used with the Cable Distribution Spool to offset the spool so that the front edge of the spool is close to the front edge of cable management fingers in the Evolution g2 Double-Sided Cable Managers. • Use in 10”W (250 mm), 12”W (300 mm) and 15”W (380 mm) vertical cable managers; each manager includes three spools and three spacers • Attaches to the Movable Mid-Sections inside double-sided Evolution g2 Vertical Cable Managers • Use one Cable Distribution Spool Spacer with each Cable Distribution Spool when the Movable Mid-Sections in the cable manager are set for a 50/50 front/rear split • Use two Cable Distribution Spool Spacers with each Cable Distribution Spool when the Movable Mid-Sections in the cable manager are set for a 60/40 front/rear split; stack both of the Cable Distribution Spool Spacers on the 60% side • Spacers are 2.8” (71 mm) in diameter x 2.5”H (64 mm) and made from black ABS plastic • Each kit includes eight spacers and mounting hardware Part Number Description Shipping Weight lb (kg) 35505-001 Cable Distribution Spool Spacer Kit 1 (0.5) Cable Divider Bar Kit Cable Divider Bar Kit provides tie points for cables inside Evolution Vertical Cable Managers and divides the interior of the cable manager to create multiple pathways for cables. • Use with any height Evolution Vertical Cable Manager • Attaches to the fixed accessory panels inside vertical cable managers • Each Cable Divider Bar is 5.75”H x 1”W x 20”L (146 mm x 25 mm x 510 mm), welded steel construction consisting of a vertical cable lashing bar and two U-shaped cable dividers • Use side-by-side to create multiple pathways in 10”W (250 mm) or wider cable managers • Each kit includes four Cable Divider Bars and mounting hardware All Other Managers with 50/50 Front/Rear Split 6 (150) 8 (200) 10 (250) 12 (300) 15 (380) 1 1 2 2 2 0 1 1 2 2 Description Shipping Weight lb (kg) 35475-701 Fiber Segregation Kit 6 (2.7) 35503-701 Cable Divider Bar Kit 3 (1.4) Evolution™ Floor Bracket secures the base of Evolution Vertical Cable Managers to the floor when located at the end of a row of equipment racks. • Light-duty, steel bracket with attachment hole sized for 1/4” hardware • Sold in packs of 12, order floor attachment hardware separately Part Number Description Shipping Weight lb (kg) 35506-701 Evolution Floor Bracket, Pack of 12 3 (1.4) Color is black. • Each kit includes two 20.5”H (521 mm) J-shaped steel mounting brackets, eight plastic Fiber Segregation Spools and mounting hardware that create a separate pathway inside the vertical cable manager when assembled and installed • The Fiber Segregation Spools turn 360° with stops at 90° allowing easy access to fiber cables • The assembled bracket is 3.8”W x 4.3”D (97 mm x 109 mm) with a 2.4”W x 4.0”D (61 mm x 102 mm) interior space and includes mounting hardware Part Number Shipping Weight lb (kg) Evolution™ Floor Bracket Fiber Segregation Kit creates a separate pathway for fiber cables and patch cords inside Evolution Vertical Cable Managers. • Use with any height Evolution Vertical Cable Manager • Attaches to the inside single-sided vertical managers • The number of kits allowed per manager depends on the width of the vertical cable manager and the position of the Movable Mid-Section in double-sided managers. See table below: Double-Sided with 60/40 Front/Rear Split Description Color is black. Fiber Segregation Kit Cable Manager Width in (mm) Part Number Color is black. 3 EVOLUTION CA BLE MA NA G EMENT P R O D U C T D ATA S H E E T ACCESSORIES and SER VICE PARTS Solid Rear Panel Evolution g2 Double-Sided Cable Managers shown with Solid Mid Panel (fig.1), Movable Mid-Section (fig. 2) and Solid Rear Panel (fig. 3) Solid Rear Panel encloses the rear of the Evolution g1 Single-Sided Vertical Cable Manager. •Easy installation – hangs from the top of the manager; attaches to the back of the fixed accessory panels with included hardware • Install Cable Distribution Spools and any additional fixed accessory panels before attaching the Solid Rear Panel; does not block attachment of other cable management accessories inside the manager • Sold individually or in pairs; select to match the width and height of the cable manager Height ft (m) 6”W 8”W 10”W 12”W 15”W Shipping (150 mm) (200 mm) (250 mm) (300 mm) (380 mm) Weight lb (kg) Part Number (each) 6 (1.8) 7 (2.1) 8 (2.4) 35501-701 35501-702 35501-703 35501-704 35501-705 35501-706 6 (1.8) 7 (2.1) 8 (2.4) 35501-751 35501-752 35501-753 35501-754 35501-755 35501-756 35501-707 35501-708 35501-709 35501-710 35501-711 35501-712 35501-713 35501-714 35501-715 9 (4.1) 11 (5.0) 12 (5.4) 35501-763 35501-764 35501-765 34 (15.4) 42 (19.1) 46 (20.9) Part Number (Pair) 35501-757 35501-758 35501-759 35501-760 35501-761 35501-762 Figure 1 Figure 2 Figure 3 Color is black. Shipping weights are for 15 inch wide (380 mm) Solid Rear Panels. Movable Mid-Section Kit Solid Mid Panel Solid Mid Panel covers and divides the front and rear of the Evolution g2 Double-Sided Vertical Cable Manager. • Easy installation – nested two-piece assembly telescopes to cover the width of the manager; attaches to the back of the Movable Mid-Sections inside the manager with included hardware • Does not block attachment of additional Moveable Mid-Sections or other cable management accessories inside the manager • Includes one Moveable Mid-Section for 7’H (2.1 m) manager and two for 8’H (1.8 m) manager. • Sold individually or in packs of four; select to match the width and height of the cable manager Height ft (m) 6”W 8”W 10”W 12”W 15”W Shipping (150 mm) (200 mm) (250 mm) (300 mm) (380 mm) Weight lb (kg) Part Number (each) 6 (1.8) 7 (2.1) 8 (2.4) 35497-701 35497-702 35497-703 35497-704 35497-705 35497-706 6 (1.8) 7 (2.1) 8 (2.4) 35497-751 35497-752 35497-753 35497-754 35497-755 35497-756 35497-707 35497-708 35497-709 35497-710 35497-711 35497-712 35497-713 35497-714 35497-715 14 (6.4) 16 (7.3) 18 (8.2) 35497-763 35497-764 35497-765 58 (26.3) 62 (28.1) 70 (31.8) 35497-760 35497-761 35497-762 Color is black. Shipping weights are for 15 inch wide (380 mm) Solid Mid Panels. Solid Side Panel Solid Side Panel covers the side of a Evolution g2 Double-Sided Vertical Cable Manager located at the end of a row of equipment racks. • Easy tool-less installation – hangs from the top of the manager and attaches at the bottom of the manager with included snap-in hardware • Sold individually or in pairs; select to match the height of the cable manager Part Number Description Height - ft (m) Shipping Weight lb (kg) 35502-701 35502-702 35502-703 35502-751 35502-752 35502-753 6 (1.8), Each 7 (2.1), Each 8 (2.4), Each 6 (1.8), 1 Pair 7 (2.1), 1 Pair 8 (2.4), 1 Pair 16 (7.3) 19 (8.6) 21 (9.5) 30 (13.6) 35 (15.9) 39 (17.7) Color is black. Part Number Description Width - in (mm) Shipping Weight lb (kg) 35493-701 For 6 (150) Evolution g2 DoubleSided Vertical Cable Manager 4 (1.8) 35493-702 For 8 (200) Evolution g2 DoubleSided Vertical Cable Manager 5 (2.3) 35493-703 For 10 (250) Evolution g2 DoubleSided Vertical Cable Manager 5 (2.3) 35493-704 For 12 (300) Evolution g2 DoubleSided Vertical Cable Manager 7 (3.2) 35493-705 For 15 (380) Evolution g2 DoubleSided Vertical Cable Manager 8 (3.6) Color is black. Part Number (Pack of 4) 35497-757 35497-758 35497-759 Kit includes three additional Movable Mid-Sections for the Evolution g2 Double-Sided Vertical Cable Manager. • Select to match the width of the cable manager • Includes installation hardware Fixed Accessory Panel Kit Kit includes three additional fixed accessory panels for Evolution g1 Single-Sided Vertical Cable Manager. • Select to match the width of the cable manager • Includes installation hardware Part Number Description Width - in (mm) Shipping Weight lb (kg) 35492-701 For 6 (150) Evolution g1 SingleSided Vertical Cable Manager 3 (1.4) 35492-702 For 8 (200) Evolution g1 SingleSided Vertical Cable Manager 4 (1.8) 35492-703 For 10 (250) Evolution g1 SingleSided Vertical Cable Manager 5 (2.3) 35492-704 For 12 (300) Evolution g1 SingleSided Vertical Cable Manager 6 (2.7) 35492-705 For 15 (380) Evolution g1 SingleSided Vertical Cable Manager 7 (3.2) Color is black. All products quoted are subject to availability based on manufacturing capacity and shipping dates should be considered estimates only. While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products. ©2010 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, MegaFrame, Saf-T-Grip, Seismic Frame, SlimFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, OnTrac, QuadraRack, Simply Efficient and Velocity are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies Rev.4 08/10 MKT-60020-390 P R O D U C T D ATA S H E E T POWER STRIPS for CPI Rack and Cabinet Systems K E Y F E AT U R E S • Distribute power to multiple devices from a single power connection • NEMA style outlets and plugs • Available with thermal circuit breakers to protect circuits from overload • Available with surge-protection to protect equipment from power spikes • Available with local current meters to provide easy current monitoring A P P L I C AT I O N S Basic Power Strips feature optional thermal circuit breakers and surge protection • Power Strips distribute single-phase power to multiple pieces of equipment from a single power connection. USE WITH • CPI Cabinet Systems • CPI Rack Systems R E L AT E D A C C E S S O R I E S • Power Distribution Units (PDUs) • Electronic Locking System (ELS) • Remote Infrastructure Management (RIM-600) System CPI Power Strips provide basic power distribution into racks and cabinets allowing you to share a single power connection with multiple pieces of equipment. CPI Power Strips are available in two configurations: basic and metered. Basic Power Strips feature optional thermal circuit breakers and surge protection. Circuit breakers limit the amount of current available to equipment while surge protection blocks excessive voltage from equipment. Both features are critical with unconditioned line power. Metered configurations include an in-line digital ammeter with display to show the amount of current being used by attached equipment. This feature allows the user to monitor current use and judge the amount of remaining capacity on the power strip before adding a new device to the circuit. Choose vertical or horizontal rack-mount power strips that match the voltage and current rating of the power connection. NEMA-NEMA style plug and outlet combinations are available. See inside for product selection. Contact CPI Technical Support for configuration assistance. +1-800-834-4969 techsupport@chatsworth.com www.chatsworth.com Power Strips for CPI Racks and Cabinets P R O D U C T D ATA S H E E T S P E C I F I C AT I O N S • Single-input, vertical and horizontal rack-mount power strips • For indoor use only, in environmentally controlled areas; may not be used outdoors, in harsh environments or in air-handling spaces • Power Input: - Specific to Power Strip (see order tables) - Stated as maximum rated voltage and current of inlet/plug - 50/60 Hz • Power Output: - Specific to Power Strip (see order tables) - Same voltage/frequency as input • Power Inlet/Plugs: - Specific to Power Strip (see order tables) - NEMA plug, straight or locking • Power Cord: - Attached, 10’L (3.0 m) - Not rated for plenum use • Power Outlet Receptacles: - Specific to Power Strip (see order tables) - NEMA outlets/receptacles • Circuit Protection: - Optional Thermal (T) circuit breakers - Optional Surge Protection - 330 Volt, 720 Joules - UL & c-UL 1449 Recognized rating - Surge suppression active indicator – red LED • Current Metering: - Digital ammeter(s) are included on metered Power Strips - Each ammeter has a 3-digit LED display • Certifications: - Specific to Power Strip - Most Power Strips are UL & c-UL Listed Accessory 60950 - P/Ns 13239-7XX are UL & c-UL Recognized 1363 • Includes Rack/Cabinet Mounting Brackets: - Vertical Power Strips include brackets for attaching the Power Strip to a CPI Rack System or a Cabinet depending on the part number ordered - The Rack System part numbers include one pair of 6.5"D (165 mm) Offset Rack-Mount Brackets that attach to the rack's equipment mounting channels. Each bracket uses 1U of rack-mount space. Other sizes are available as accessories (ordered separately) - The Cabinet part numbers include a bracket that attach the power strip to M-Series MegaFrame® or C-Series SlimFrame® Cabinets and tool-less mounting hardware that can be used to attach the Power Strip to the mounting bracket that is included with the F-Series TeraFrame® or GlobalFrame™ Cabinet or an accessory power manager - Horizontal Power Strips include mounting brackets for 19”EIA rack-mounting • Finish: Black only P L U G & R E C E P TA C L E C O N F I G U R AT I O N S Locking Plugs (Single-Phase) NEMA L5-15P 125VAC/15A 125VAC/20A Straight Plugs NEMA 5-15P NEMA 5-20P 125VAC/15A 125VAC/20A Power Receptacles NEMA 5-15R NEMA 5-20R 125VAC/15A 125VAC/20A NEMA L5-20P DIMENSIONS 1.6” (41 mm) 1.6” (41 mm) 17.1” (436 mm) 1.6” (41 mm) 1.73” (44 mm) 66.3” (1683 mm) 4.5” (114 mm) 38.5” (978 mm) 17.1” (436 mm) 1.73” (44 mm) ACCESSORIES Offset Rack-Mount Brackets Two brackets included in each kit Use Versa-Clamp brackets where additional depth is required over the standard 6.5”D (165 mm) clamp included with vertical power strips for racks systems (RBK). • Versa-Clamp allows rotation of power strip into preferred orientation prior to securing in place • Versa-Clamp allows vertical positioning • Designed to be used in conjunction with 12851 and 12853 series power strips purchased separately Part Number Description Shipping Weight 12847-701 6.5” (165 mm) Offset Bracket Kit* 2 lb (0.9 kg) 12847-702 9.1” (231 mm) Offset Bracket Kit 2 lb (0.9 kg) 12847-703 11.7” (297 mm) Offset Bracket Kit 2 lb (0.9 kg) *Vertical Power Strips for racks systems include 6.5”D (165 mm) mounting brackets Illustration shows 9.1” (231 mm) and standard 6.5” (165 mm) brackets 2 Power Strips for CPI Racks and Cabinets P R O D U C T D ATA S H E E T O R D E R I N G I N F O R M AT I O N Single-Phase, Vertical Power Strips with Versa-Clamp Mounting Brackets for Cabinets1 Inlet Volts Amps Outlets Plug3 5-15P 15 L5-15P 125 Surge Protector Size4 Length in (mm) Basic Metered Part Number2 Qty Type3 10 5-15R - - 38.5 (978) 12850-721 - 10 5-15R 1 x 15A - 38.5 (978) 12850-701 - 10 5-15R 1 x 15A Yes 38.5 (978) 12850-702 - 20 5-15R - - 66.3 (1683) 12848-721 - 20 5-15R 1 x 15A - 66.3 (1683) 12848-701 12848-751 20 5-15R 1 x 15A Yes 66.3 (1683) 12848-702 12848-752 10 5-15R 1 x 15A - 38.5 (978) 12850-703 - 10 5-15R 1 x 15A Yes 38.5 (978) 12850-704 - 20 5-15R 1 x 15A - 66.3 (1683) 12848-703 - 20 5-15R 1 x 15A Yes 66.3 (1683) 12848-704 12848-754 10 5-20R - - 38.5 (978) 12850-723 - 10 5-20R 1 x 20A - 38.5 (978) 12850-705 - 10 5-20R 1 x 20A Yes 38.5 (978) 12850-706 - 20 5-20R - - 66.3 (1683) 12848-723 12848-773 20 5-20R 1 x 20A - 66.3 (1683) 12848-705 12848-755 20 5-20R 1 x 20A Yes 66.3 (1683) 12848-706 12848-756 10 5-20R - - 38.5 (978) 12850-724 - 10 5-20R 1 x 20A - 38.5 (978) 12850-707 - 10 5-20R 1 x 20A Yes 38.5 (978) 12850-708 - 20 5-20R - - 66.3 (1683) 12848-724 12848-774 20 5-20R 1 x 20A - 66.3 (1683) 12848-707 12848-757 20 5-20R 1 x 20A Yes 66.3 (1683) 12848-708 12848-758 5-20P 20 Circuit Breaker (Thermal) L5-20P Note: 1. The part numbers in the order table above include Versa-Clamp Mounting Brackets for CPI ‘s M-Series MegaFrame® and C-Series SlimFrame® Cabinets and tool-less mounting hardware for F-Series TeraFrame® and GlobalFrame™ Cabinet System PDU/power strip mounting brackets. Order Power Strip Bracket Kit (P/N 34434-C01) or other power manager accessory to install the power strips in TeraFrame Cabinets if the cabinet does not include a PDU mounting bracket. 2. There is a different part number for Basic and Metered Power Strips. Metered Power Strips include a single in-line ammeter with digital display. 3. Plugs and outlets are NEMA. LX-XXP means locking plug. Power Strips have a 10’L (3 m) power cord. 4. Power Strips are 1.6"W x 1.6"D (41 mm x 41 mm). Note that Power Strips with 10 outlets are 38.5"L (978 mm). 5. Tool-less mounting hardware is spaced 36.75" (933 mm) apart on 38.5"L (978 mm) power strips and 64.75" (1645 mm) apart on 66.3"L (1683 mm) power strips. 6. 15 Ampere power strips are de-rated to 12 Amperes; 20 Ampere power strips are de-rated to 16 Amperes. Contact CPI Technical Support (800-834-4969) to request other options. 3 Power Strips for CPI Racks and Cabinets P R O D U C T D ATA S H E E T O R D E R I N G I N F O R M AT I O N Single-Phase, Vertical Power Strips with Versa-Clamp Mounting Brackets 2-Post and 4-Post Rack Systems1 Inlet Volts Amps Outlets Plug3 5-15P 15 L5-15P 125 Surge Protector Size4 Length in (mm) Basic Metered Part Number2 Qty Type3 10 5-15R - - 38.5 (978) 12853-721 - 10 5-15R 1 x 15A - 38.5 (978) 12853-701 - 10 5-15R 1 x 15A Yes 38.5 (978) 12853-702 - 20 5-15R - - 66.3 (1683) 12851-721 - 20 5-15R 1 x 15A - 66.3 (1683) 12851-701 12851-751 20 5-15R 1 x 15A Yes 66.3 (1683) 12851-702 12851-752 10 5-15R 1 x 15A - 38.5 (978) 12853-703 - 10 5-15R 1 x 15A Yes 38.5 (978) 12853-704 - 20 5-15R 1 x 15A - 66.3 (1683) 12851-703 - 20 5-15R 1 x 15A Yes 66.3 (1683) 12851-704 12851-754 10 5-20R - - 38.5 (978) 12853-723 - 10 5-20R 1 x 20A - 38.5 (978) 12853-705 - 10 5-20R 1 x 20A Yes 38.5 (978) 12853-706 - 20 5-20R - - 66.3 (1683) 12851-723 12851-773 20 5-20R 1 x 20A - 66.3 (1683) 12851-705 12851-755 20 5-20R 1 x 20A Yes 66.3 (1683) 12851-706 12851-756 10 5-20R - - 38.5 (978) 12853-724 - 10 5-20R 1 x 20A - 38.5 (978) 12853-707 - 10 5-20R 1 x 20A Yes 38.5 (978) 12853-708 - 20 5-20R - - 66.3 (1683) 12851-724 12851-774 20 5-20R 1 x 20A - 66.3 (1683) 12851-707 12851-757 20 5-20R 1 x 20A Yes 66.3 (1683) 12851-708 12851-758 5-20P 20 Circuit Breaker (Thermal) L5-20P Note: 1. The part numbers in the order table above include a 6.5”D (165 mm) Offset Rack-Mount Brasket Kit (P/N 12847-701) for 2-Post and 4-Post Rack Systems. Brackets use 2U. 2. There is a different part number for Basic and Metered Power Strips. Metered Power Strips include a single in-line ammeter with digital display. 3. Plugs and outlets are NEMA. LX-XXP means locking plug. Power Strips have a 10’L (3 m) power cord. 4. Power Strips are 1.6"W x 1.6"D (41 mm x 41 mm). Note that Power Strips with 10 outlets are 38.5"L (978 mm). 5. 15 Ampere power strips are de-rated to 12 Amperes; 20 Ampere power strips are de-rated to 16 Amperes. Contact CPI Technical Support (800-834-4969) to request other options. 4 Power Strips for CPI Racks and Cabinets P R O D U C T D ATA S H E E T O R D E R I N G I N F O R M AT I O N Single-Phase, Horizontal Rack-Mount Power Strips with 19”W EIA Mounting Brackets1 Volts Amps 5-15P 15 L5-15P 125 5-20P Basic Metered - 1U x 1.6 (41) 12816-709 - Type3 8 5-15R - 8 5-15R 1 x 15A - 1U x 1.6 (41) 12816-701 8 5-15R 1 x 15A Yes 1U x 1.6 (41) 12816-703 - 10 5-15R 1 x 15A - 1U x 4.5 (114) - 13239-751 10 5-15R 1 x 15A Yes 1U x 4.5 (114) - 13239-753 8 5-15R - - 1U x 1.6 (41) 12816-710 - 8 5-15R 1 x 15A - 1U x 1.6 (41) 12816-702 - 8 5-15R 1 x 15A Yes 1U x 1.6 (41) 12816-704 - 8 5-20R - - 1U x 1.6 (41) 12816-711 - 8 5-20R 1 x 20A - 1U x 1.6 (41) 12816-705 - 8 5-20R 1 x 20A Yes 1U x 1.6 (41) 12816-707 - 10 5-20R 1 x 20A - 1U x 4.5 (114) - 13239-755 10 5-20R 1 x 20A Yes 1U x 4.5 (114) - 13239-757 8 5-20R - - 1U x 1.6 (41) 12816-712 - 8 5-20R 1 x 20A - 1U x 1.6 (41) 12816-706 - 8 5-20R 1 x 20A Yes 1U x 1.6 (41) 12816-708 - 10 5-20R 1 x 20A - 1U x 4.5 (114) - 13239-756 10 5-20R 1 x 20A Yes 1U x 4.5 (114) - 13239-758 20 L5-20P Size4 HxD in (mm) Qty Outlets Plug3 Surge Protector Circuit Breaker (Thermal) Inlet Part Number2 Note: 1. The Part Numbers in the order table above include Mounting Brackets for 19"W EIA Cabinets or Racks. 2. There is a different part number for Basic and Metered Power Strips. Metered Power Strips include a single in-line ammeter with digital display. 3. Plugs and outlets are NEMA. LX-XXP means locking plug. All Power Strips have a 10’L (3 m) power cord. 4. 15 Ampere power strips are de-rated to 12 Amperes; 20 Ampere power strips are de-rated to 16 Amperes. Contact CPI Technical Support (800-834-4969) to request other options. Front & Rear View P/N 13239-755 Listed on this page ©2011 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, MegaFrame, Saf-T-Grip, Seismic Frame, SlimFrame, TeraFrame, Cube-iT Plus, Evolution, OnTrac, and QuadraRack are federally registered trademarks of Chatsworth Products, Inc. GlobalFrame, Simply Efficient and Velocity are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. Rev.2 03/11 MKT-60020-474 Product Information Sheet UNIVERSAL CABLE RUNWAY Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry standard features you’ve come to expect. With the runway supported every 5’ (1.5 m), maximum load with minimal deflection is 132 lb/ft (59.9 kg). n Made of 3/8” x 1-1/2” x .065” (9.53 mm x 38 mm x 1.65 mm) wall rectangular steel tubing n Cross members welded at 12” (300 mm) intervals n Individually boxed to prevent scratches and damage n Standard length is 9’-11 1/2”/119.5” (3035 mm) n Installation Best Practices includes Runway Elevation Kit Part Number/Color Width (Dim. A)* in (mm) Shipping Weight lb (kg) Gray White Black 10250-104 10250-204 10250-704 4 (100) 18 (8.2) 10250-106 10250-206 10250-706 6 (150) 19 (8.6) 10250-109 10250-209 10250-709 9 (230) 20 (9.1) 10250-112 10250-212 10250-712 12 (300) 25 (11.3) 10250-115 10250-215 10250-715 15 (380) 27 (12.2) 10250-118 10250-218 10250-718 18 (460) 29 (13.2) 10250-124 10250-224 10250-724 24 (610) 32 (14.5) 10250-131 10250-231 10250-731 30 (760) 35 (15.7) 10250-137 10250-237 10250-737 36 (910) 38 (17.2) A Note: Shown in two sections for illustrative purposes, actual product is one piece. +1-800-834-4969 in U.S. & Canada • www.chatsworth.com ©2010 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, MegaFrame, Saf-T-Grip, Seismic Frame, SlimFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, OnTrac, QuadraRack, Simply Efficient and Velocity are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. 7/10 Product Specifications PM-GS3-24 w/Termination Mgt. Material ID: 760062356 GigaSPEED® XL PATCHMAX® GS3 Category 6 U/UTP Copper Patch Panel, 24 port with termination manager l Available for use with the DYMO® labeling solution l This product will move to limited availability July 1, 2012. We expect this product to be obsolete by January 1, 2013. Please contact your local CommScope sales representative for pricing and availability. This product will be discontinued on: 1/1/2013 Replaced By: 360PMGS32U SYSTIMAX 360™ GigaSPEED® XL PATCHMAX® GS3 Category 6 U/UTP Patch Panel, 24 port Dimensions Depth, with cable management 8.13 in Diameter Over Dielectric, maximum 1.168 mm | 0.046 in Diameter Over Dielectric, minimum 0.762 mm | 0.030 in Height 89.66 mm | 3.53 in Width 482.60 mm | 19.00 in Electrical Specifications ANSI/TIA Category 6 Current Rating 1.5 A @ 20 °C 1.5 A @ 68 °F Dielectric Withstand Voltage, RMS, conductive surface 1500 Vac @ 60 Hz Dielectric Withstand Voltage, RMS, contacttocontact 1000 Vac @ 60 Hz Insulation Resistance, minimum 500 MOhm Environmental Specifications Flammability Rating UL 94 V0 Operating Temperature 10 °C to +60 °C (+14 °F to +140 °F) Relative Humidity Up to 95%, noncondensing Safety Standard cUL | UL Storage Temperature 40 °C to +70 °C (40 °F to +158 °F) General Specifications Brand GigaSPEED® XL | PATCHMAX® | SYSTIMAX® Cable Type U/UTP (unshielded) Modules, quantity 4 Product Type Panel Total Ports, quantity 24 Color Black Package, quantity 1 ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/14/2011 page 1 of 2 1/11/2012 Product Specifications PM-GS3-24 w/Termination Mgt. - Material ID: 760062356 Rack Type EIA 19 in Rack Units 1 Mechanical Specifications Conductor Gauge, solid 22 AWG | 24 AWG | 26 AWG Conductor Gauge, stranded 22 AWG | 24 AWG Conductor Type Solid | Stranded (7 strands) Material Type Highimpact, flame retardant, thermoplastic | Powder coated steel Outlet/Module Contact Plating Precious metals Plug Insertion Life Test Plug IEC 606037 compliant plug Plug Insertion Life, minimum 750 times Plug Retention Force, minimum 30 lbf | 133 N Rear Termination Contact Plating Precious metals Rear Termination Type IDC Wiring T568A | T568B Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/14/2011 page 2 of 2 1/11/2012 Product Specifications PM-GS3-48 w/Termination Mgt. Material ID: 760062364 GigaSPEED® XL PATCHMAX® GS3 Category 6 U/UTP Copper Patch Panel, 48 port with termination manager l Available for use with the DYMO® labeling solution l This product will move to limited availability July 1, 2012. We expect this product to be obsolete by January 1, 2013. Please contact your local CommScope sales representative for pricing and availability. This product will be discontinued on: 1/1/2013 Replaced By: 360PMGS32U48P SYSTIMAX 360™ GigaSPEED® XL PATCHMAX® GS3 Category 6 U/UTP Patch Panel, 48 port Dimensions Depth, with cable management 8.13 in Diameter Over Dielectric, maximum 1.168 mm | 0.046 in Diameter Over Dielectric, minimum 0.762 mm | 0.030 in Height 134.37 mm | 5.29 in Width 482.60 mm | 19.00 in Electrical Specifications ANSI/TIA Category 6 Current Rating 1.5 A @ 20 °C 1.5 A @ 68 °F Dielectric Withstand Voltage, RMS, conductive surface 1500 Vac @ 60 Hz Dielectric Withstand Voltage, RMS, contacttocontact 1000 Vac @ 60 Hz Insulation Resistance, minimum 500 MOhm Environmental Specifications Flammability Rating UL 94 V0 Operating Temperature 10 °C to +60 °C (+14 °F to +140 °F) Relative Humidity Up to 95%, noncondensing Safety Standard cUL | UL Storage Temperature 40 °C to +70 °C (40 °F to +158 °F) General Specifications Brand GigaSPEED® XL | PATCHMAX® | SYSTIMAX® Cable Type U/UTP (unshielded) Modules, quantity 8 Product Type Panel Total Ports, quantity 48 Color Black Package, quantity 1 Rack Type EIA 19 in ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/14/2011 page 1 of 2 1/11/2012 Product Specifications PM-GS3-48 w/Termination Mgt. - Material ID: 760062364 Rack Units 2 Mechanical Specifications Conductor Gauge, solid 22 AWG | 24 AWG | 26 AWG Conductor Gauge, stranded 22 AWG | 24 AWG Conductor Type Solid | Stranded (7 strands) Material Type Highimpact, flame retardant, thermoplastic | Powder coated steel Outlet/Module Contact Plating Precious metals Plug Insertion Life Test Plug IEC 606037 compliant plug Plug Insertion Life, minimum 750 times Plug Retention Force, minimum 30 lbf | 133 N Rear Termination Contact Plating Precious metals Rear Termination Type IDC Wiring T568A | T568B Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/14/2011 page 2 of 2 1/11/2012 S110® MODULAR JACK BLOCKS le tib pa m co Multi-pair punch-down tool can be used to reduce termination time 6- and 12-port panels may be detached from stand-off legs before, during or after installation Cable entering through access openings in bases are hidden by designation labels to provide a clean appearance Horizontal cabling is routed to S110 termination in the channel between rows of outlets Modular jacks are IEC 603.7 compliant and have 50 microinches minimum hard gold plating over nickel S110 4-pair connecting blocks feature a “universal” wiring for compatibility with both T568A and T568B wiring configurations Cost effective modular patching solution for small to medium size LANs Modular outlets and S110 terminations are located on front of panels for easy access Also available mounted to S110 Tower which includes cable managers and covers to route and protect horizontal cables for a clean appearance W W W . S I E M O N . C O M 110 PRODUCTS The Siemon modular jack block provides a pre-wired distribution solution for network applications. The modular jack block can be wall mounted and is typically used to connect horizontal cabling to network equipment. connections are made by terminating 4-pair horizontal cables to S110D connecting blocks and by patching to active equipment. S110AB5-50JP ............6-port, T568A/B wiring, with detachable legs height: 45.7mm (1.80 in.), width: 272mm (10.7 in.), depth: 82.8mm (3.26 in.) S110AB5-100JP ..........12-port, T568A/B wiring, with detachable legs height: 91.4mm (3.60 in.), width: 272mm (10.7 in.), depth: 82.8mm (3.26 in.) S110AB5-200JP ..........24-port, T568A/B wiring, with permanent legs height: 183mm (7.20 in.), width: 272mm (10.7 in.), depth: 82.8mm (3.26 in.) S110AB5-300JP ..........36-port, T568A/B wiring, with permanent legs height: 274.3mm (10.8 in.), width: 272mm (10.7 in.), depth: 82.8mm (3.26 in.) Rack Mount Panels: Vertical Mount Panels: S110AB5-50JP ............ 6-port, T568A/B wiring, for mounting on S89 bracket (not included) height: 254.0mm (10.0 in.), width: 85.9mm (3.38 in.), depth: 86.6mm (3.41 in.) (demensions include S89 bracket) S110DB5-24RJP ..........24-port jack panel, on a 19 inch panel, T568A/B wiring, 2 RMS Note: 1 RMS = 44.5mm (1.75 in.) Because we are continuously improving our products, The Siemon Company reserves the right to change specifications and availability without prior notice. S110®and MC® are trademarks of The Siemon Company The Americas Watertown, CT USA Phone (1) 860 945 4200 W W W . S I E M O N . C O M S89B...........................89B mounting bracket S89D ..........................89D mounting bracket For related product information request Spec Sheet(s): MC® 5 Modular Cords (PROD-SS-MOD) Termination Tools (PROD-SS-S78) Europe/Middle East/Africa Surrey, England Phone (44 ) 0 1483 480040 Asia/Pacific Shanghai, P.R. China Phone (86) 21 6390 6778 PROD-SS-10J Rev. H 6/03 S110® Modular Jack Wall Mount Blocks: © 2003 The Siemon Company 110 PRODUCTS O R D E R I N G I N F O R M AT I O N Closet Connector Housing (CCH) 1 rack unit, holds 2 CCH connector panels 133 Designed based on thousands of hours of customer feedback, Corning Cable Systems Closet Connector Housings (CCHs) offer more than two dozen innovative features that make installation and troubleshooting of fiber optic connectivity faster, easier and more cost effective. From fiber and cable routing and strain relief, to port labeling and termination, these housings reduce the risk of error that can disrupt networks. Designed based on Closet Connector Housings (CCHs) provide interconnect or cross-connect capabilities between outside plant, riser or distribution cables and opto-electronics. Like all LANscape Solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules. The units are designed for rack mounting in 19-in (48 cm) racks or optional 23-in (58 cm) equipment racks (1.75-in EIA hole spacing). They are available in rack space options of 1U (two panels, cassettes or modules), 2U (four panels, cassettes or modules), 3U (six panels, cassettes or modules) and 4U (twelve panels, cassettes or modules). The 1U, 2U and 3U options feature a slide -out tray and see-through, removable top covers. The CCH-04U features a clear door, removable front and rear enclosures and a platinum-painted interior for maximum visibility and access. Every CCH housing is shipped complete with strain relief brackets, routing clips and guides, and mounting brackets for proper installation. Documentation labels are provided and components can be added as needed to construct a fiber distribution frame for any application. All housings include a removable tinted polycarbonate front door. All size housings have field-installable lock kits available for both front and rear doors. All CCH housings can also be upgraded for pigtail splicing to full fiber capacity and easy, modular fiber management through the use of CCH Splice Cassettes (CCHCS), or for easy, modular fiber management when using field-installable connectors through the use of CCH Slack Cassettes (CCH-CF). Features and Benefits Interconnect and cross-connect capability Ideal for field connectorization Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Visibility and ease of access for installation, testing and troubleshooting Product Specification CCH-01U_NAFTA_AEN Page 1 | Revision date 2012-04-21 Part Number: CCH-01U Closet Connector Housing (CCH) 1 rack unit, holds 2 CCH connector panels Features and Benefits Internal and external strain-relief options Flexibility for installation and moves, adds and changes (MACs) Accepts panels, modules and cassettes Variety of field termination options Adaptable to use as a modular splice housing Splices are stored and protected in same footprint Standards 1 2 Approval and Listings 9.41 115 1 Meets ANSI/TIA/EIA-568A and 606 1 Specifications General Specifications Application Enterprise Networks, Data Center Mounting Type Rack 19-in, Rack 23-in, Cabinet-mount Product Type Fiber Optic Hardware Design - Hardware Housing Color Black Housing Type CCH Height Unit 1U Locking Availability Front or rear Maximum Number of Panels per Housing 2 Panel or Module Type CCH Splice Tray Options Use CCH Splice Cassette (CCH-CS) Mechanical Characteristics Dimensions (HxWxD) Product Specification CCH-01U_NAFTA_AEN Page 2 | Revision date 2012-04-21 4.4 cm x 48.3 cm x 43 cm (1.75 in x 19 in x 17 in) Closet Connector Housing (CCH) 1 rack unit, holds 2 CCH connector panels Chemical Characteristics RoHS Free of hazardous substances according to RoHS 2002/95/ EG Ordering Information Part Number CCH-01U Product Description Closet Connector Housing (CCH), 1 rack unit, holds 2 CCH connector panels Shipping Information Units per Delivery 1/1 Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Product Specification CCH-01U_NAFTA_AEN Page 3 | Revision date 2012-04-21 Closet Connector Housing (CCH) Panel, LC Adapters Duplex, UPC, 12 F, Single-mode (OS2) 133 Corning Cable Systems Closet Connector Housing Panels (CCH-CP) are offered in a variety of fiber counts for use with LANscape® Solutions hardware products for a “one-size-fits-all” approach. Used with factory-installed or field-installable connectors, these panels provide interconnect or cross-connect capability in a housing at main cross-connects, intermediate cross-connects, telecommunication rooms or work areas. Available with a variety of industry-standard adapter types, the CCH-CP provides an efficient way to securely mate two connectors and offers multimode and single-mode applications. Corning Cable Features and Benefits Universal design approach One-size-fits-all LANscape® Solutions housings Broadest range of fiber count and adapter types Solutions for all needs Part Number: CCH-CP12-A9 Colored icon labeling Easy connector identification 1 1 Specifications 0 General Specifications Application Enterprise Networks, Data Center Product Type Panels & Modules Fiber Category Single-mode (OS2) Design - Hardware Connector Polish UPC Fiber Count 12 Number of Adapters per Panel 12 Specification Sheets CCH-CP12-A9_NAFTA_AEN Page 1 | Revision date 2011-12-18 Closet Connector Housing (CCH) Panel, LC Adapters Duplex, UPC, 12 F, Single-mode (OS2) Design Adapter Adapter Housing Color Blue Adapter Housing Material Composite Adapter Type LC duplex Insert Material Ceramic Chemical Characteristics RoHS Free of hazardous substances according to RoHS 2002/95/ EG Ordering Information Order Number CCH-CP12-A9 Product Description Closet Connector Housing (CCH) Panel, LC adapters, Duplex, UPC, 12 F, Single-mode (OS2) Shipping Information Units per Delivery 1/1 Package Contents CCH Adapter Panel with installation guide Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Specification Sheets CCH-CP12-A9_NAFTA_AEN Page 2 | Revision date 2011-12-18 Closet Connector Housing (CCH) Panel, LC Adapters Duplex, UPC, 24 F, Single-mode (OS2) 133 Corning Cable Systems Closet Connector Housing Panels (CCH-CP) are offered in a variety of fiber counts for use with LANscape® Solutions hardware products for a “one-size-fits-all” approach. Used with factory-installed or field-installable connectors, these panels provide interconnect or cross-connect capability in a housing at main cross-connects, intermediate cross-connects, telecommunication rooms or work areas. Available with a variety of industry-standard adapter types, the CCH-CP provides an efficient way to securely mate two connectors and offers multimode and single-mode applications. Corning Cable Features and Benefits Universal design approach One-size-fits-all LANscape® Solutions housings Broadest range of fiber count and adapter types Solutions for all needs Part Number: CCH-CP24-A9 Colored icon labeling Easy connector identification 1 1 Specifications 0 General Specifications Application Enterprise Networks, Data Center Product Type Panels & Modules Fiber Category Single-mode (OS2) Design - Hardware Connector Polish UPC Fiber Count 24 Number of Adapters per Panel 24 Specification Sheets CCH-CP24-A9_NAFTA_AEN Page 1 | Revision date 2011-12-18 Closet Connector Housing (CCH) Panel, LC Adapters Duplex, UPC, 24 F, Single-mode (OS2) Design Adapter Adapter Housing Color Blue Adapter Housing Material Composite Adapter Type LC duplex Insert Material Ceramic Chemical Characteristics RoHS Free of hazardous substances according to RoHS 2002/95/ EG Ordering Information Order Number CCH-CP24-A9 Product Description Closet Connector Housing (CCH) Panel, LC adapters, Duplex, UPC, 24 F, Single-mode (OS2) Shipping Information Units per Delivery 1/1 Package Contents CCH Adapter Panel with installation guide Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Specification Sheets CCH-CP24-A9_NAFTA_AEN Page 2 | Revision date 2011-12-18 UniCam® High-Performance Connectors, LC APC Single-mode (OS2) 133 Corning Cable Systems UniCam® High-Performance Connectors offer best-in-class optical performance in a fast, easy field-termination solution. These high-precision connectors guarantee exceptional insert loss – 0.1 dB typical/0.5 dB maximum per connector pair for multimode, 0.2 dB typical/0.5 dB maximum per connector pair for single-mode. Installation of an LC, SC, or ST® Compatible Connector can be accomplished in about 45 seconds with the UniCam High-Performance Tool Kit. The lightweight, handheld installation tool and the highperformance cleaver virtually eliminate human variability from installation, ensuring terminations are right, the first time, every time. This kit was designed with consideration for the network installers, from the cleaver, with its integrated fiber scrap bin and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance guaranteed. Every UniCam Connector is guaranteed to meet the published specification at the time of installation or Corning Cable Systems will replace it. Features and Benefits Broad operating temperature (-40° to +75°C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost Minimum insertion loss Optimum optical performance Standards 1 1 Approval and Listings Passed EIA/TIA 568-B.3 Intermateability Connectors are FOCIS compliant with TIA/EIA 60410A and IEC61754-20 19.48 115 0 Specification Sheets 95-200-94_NAFTA_AEN Page 1 | Revision date 2012-03-19 Corning Cable Part Number: 95-200-94 UniCam® High-Performance Connectors, LC APC Single-mode (OS2) Specifications General Specifications Technology No-Epoxy/No-Polish Keyed No Product Type Field-Installable Connectors Corning Logo Yes Packaging Single Pack Fiber Category Single-mode (OS2) Temperature Range Operation -40 °C to 75 °C exceeding EIA/TIA 568-B.3 (-40 °F to 167 °F exceeding EIA/TIA 568-B.3) Design - Connector A Connector Type LC APC Ferrule Ceramic Housing Material Composite Housing Color Green Boot Color Green Mechanical Specifications - Connector A Durability ≤ 0.2 dB change by 500 rematings, FOTP-21 Tensile Strength Jacketed Cable 44 N, change ≤ 0.2 dB, FOTP-6 (10 lb, change ≤ 0.2 dB, FOTP-6) Tensile Strength 900µ Cable 2.2 N, change ≤ 0.2 dB, FOTP-6 (0.5 lb, change ≤ 0.2 dB, FOTP-6) Temperature Cycling ≤ 0.3 dB IL, -40° to +75°C, 21 cycles Nominal Fiber Outer Diameter 125 µm Specification Sheets 95-200-94_NAFTA_AEN Page 2 | Revision date 2012-03-19 UniCam® High-Performance Connectors, LC APC Single-mode (OS2) Optical Specifications - Connector A Insertion Loss, Typical 0.4 dB Insertion Loss, Max. 0.75 dB Reflectance ≤ -40 dB Polish APC Chemical Characteristics RoHS Free of hazardous substances according to RoHS 2002/95/ EG Ordering Information Part Number 95-200-94 Product Description UniCam® High-Performance Connector, LC APC, Single-mode (OS2), ceramic ferrule, logo, single pack, green housing, green boot Shipping Information Units per Delivery 1/1 Package Contents Connector, trigger, crimp band, boot (900 µm), boot (3.0 mm), boot (2.0 mm) Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Specification Sheets 95-200-94_NAFTA_AEN Page 3 | Revision date 2012-03-19 Tripp Lite 1111 West 35th Street Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: saleshelp@tripplite.com Model #: SU2200RTXL2UA SmartOnline 2.2kVA On-Line Double-Conversion UPS, 2U Rack/Tower, 110/120V NEMA outlets Highlights 2200VA / 2.2kVA / 1600 watt on-line double-conversion 2U rack/tower UPS 110/120V +/-2% output at 50/60Hz, high efficiency economy mode option Expandable runtime, Hot-swap batteries; 19 in / 48.3cm installed depth USB, RS232 & EPO ports; support for SNMP/WEB card options Front panel status LEDs with detailed load and battery metering 2 independently switchable output load banks NEMA 5-20P input; L5-20R & 5-15/20R outlets Description 2200VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 19 inches. Expandable battery runtime with optional BP48V24-2U (limit 1) and BP48V60RT-3U (multi-pack compatible) external battery packs. Full-time sine wave 110 or 120V output with +/-2% voltage regulation. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 150V. Highly efficient operation in optional economy mode saves BTU heat output and energy costs. NEMA 5-20P input plug. NEMA 5-15/20R and NEMA L5-20R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two-bank PDU switching supports load shedding and remote reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000connected equipment insurance; extended warranty and service contracts available. Package Includes SU2200RTXL2Ua On-line Double-Conversion UPS System PowerAlert Software and cabling Mounting hardware for 4 post rack enclosures Instruction manual Features SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions conditions Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types Corrects line voltage conditions as low as 65V and as high as 150V back to selectable 110/120V (+/-2%) values Standard internal battery set offers 14 min. runtime at half load (800W) and 4.5 min. at full load (1600W) Automatic restart after power outages that drain batteries and shutdown UPS immediately provide AC power to equipment when power returns Extended runtime available with optional BP48V24-2U (limit 2 w/48VDCSPLITTER) or BP48V60RT3U (no limit) external battery packs Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches Ships with all mounting accessories for 4 post rackmount installation Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation Optional 2-9USTAND accessory enables small-footprint upright tower placement Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage setpoints Built-in Emergency Power Off (EPO) interface with cable NEMA 5-20P input plug; NEMA 5-15/20R & NEMA L5-20R output receptacles Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has 3 outlets) Front panel LEDs offer current monitoring and battery charge level information UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required Single line TEL/DSL or network ethernet line surge suppression 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance Specifications OUTPUT Output Volt Amp Capacity (VA) 2200 Output kVA capacity (kVA) 2.2 Output Watt Capacity (watts) 1600 Output kW capacity 1.6 Output power factor 0.7 Crest Factor 3:1 Nominal Output Voltage(s) Supported 110V; 120V Nominal Voltage details 120V default Frequency compatibility 50 / 60 Hz Frequency compatibility details Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start Output voltage regulation (line mode) +/- 2% Output voltage regulation (Economy line mode) +/- 10% Output voltage regulation (Battery mode) +/- 2% Built-in UPS output receptacles 6 5-15/20R outlet(s); 1 L5-20R outlet(s) Built-in controllable switched load banks Two switchable three-outlet 5-15/20R load banks Basic PDU options PDUNV (1U / 2 C19, 12 C13 outlets); PDU1420T (0U / 14 5-15/20R outlets); PDU40TDUAL (0U / 40 5-15/20R outlets) Metered PDU options PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R outlets); PDUMV40 (0U / 32 5-15/20R outlets) Switched PDU options PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMV20NET (0U / 24 5-15/20R outlets) External PDU redundancy options *ATS switch options PDUMH20AT & PDUMH20ATNET support dual UPS and hot-swappable UPS configurations Output AC waveform (AC mode) Sine wave Output AC waveform (battery mode) Pure Sine wave INPUT Rated input current (at maximum load) 16A Nominal Input Voltage(s) Supported 110V AC; 120V AC UPS input connection type 5-20P Input circuit breaker 30A UPS Input cord length (ft.) 10 UPS Input cord length (m) 3 UPS input cord length details (m) Built-in Recommended Electrical Service 20A 120V BATTERY Full load runtime (minutes) 4.5 min. (1600w) Half load runtime (minutes) 14 min. (800w) Expandable battery runtime Extended runtime supported via optional external battery packs External battery pack compatibility BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible) Expandable runtime description BP48V24-2U (limit 2 w/ 48VDCSPLITTER) DC system voltage (VDC) 48 Battery recharge rate (included batteries) Less than 6 hours from 10% to 80% Replacement battery cartridge (internal UPS battery replacement) RBC94-2U Battery Access Front panel battery access door Battery replacement description Hot-swappable, user replaceable sealed, flame retardant, non-spillable batteries VOLTAGE REGULATION Voltage regulation description Online, double-conversion power conditioning Overvoltage correction 2% output voltage regulation during overvoltages to 150 Undervoltage correction 2% output voltage regulation during undervoltages to 80 Severe undervoltage correction 2% output voltage regulation during undervoltages to 65 (under 70% load only) LEDS ALARMS & SWITCHES LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in rack/tower formats Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch Switches 2 switches control off/on power status and alarm-cancel/self-test operation SURGE / NOISE SUPPRESSION UPS AC suppression joule rating 570 UPS AC suppression response time Instantaneous UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet EMI / RFI AC noise suppression Yes PHYSICAL Installation form factors supported with included accessories 4 post 19 inch rackmount (mounting rail kit included) Installation form factors supported with optional accessories 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND) Primary form factor Rackmount UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 19 UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 8.9 x 44.4 x 48.3 Installed whole system total rack space height (rack spaces) 2U Secondary form factor Tower (requires 2-9USTAND) Installed whole system dimensions in secondary form factor (height x width x depth / inches) 17.5 x 3.5 x 19 UPS dimensions in secondary form factor (height x width x depth / cm) 44.4 x 8.9 x 48.3 UPS / Power Module weight (lbs) 47.4 UPS / Power Module weight (kg) 21.5 UPS Shipping dimensions (height x width x depth / inches) 9.8 x 20.2 x 24 UPS Shipping dimensions (height x width x depth / cm) 24.8 x 51.4 x 61 Shipping weight (lbs) 57.3 Shipping weight (kg) 26 UPS housing material Steel Cooling method Fan ENVIRONMENTAL Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC mode BTU / hr. (full load) 812.9 AC economy mode BTU / hr. (full load) 347.2 Battery mode BTU / hr. (full load) 885.6 AC economy mode efficiency rating (100% load) 94% Audible Noise < 45dB at 1m COMMUNICATIONS Communications interface USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface Network monitoring port description Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications PowerAlert software Included Communications cable USB and DB9 cabling included WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer time No transfer time (0 ms.) in online, double-conversion mode Low voltage transfer to battery power (setpoint) 80V (100% load), 65V ( High voltage transfer to battery power (setpoint) 150 SPECIAL FEATURES Cold Start (startup in battery mode during a power failure) Cold-start operation supported High availability UPS features Automatic inverter bypass; Hot swappable batteries Green & high efficiency features High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy mode operation CERTIFICATIONS UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI) WARRANTY Product Warranty Period (U.S., Canada & Puerto Rico) 2-year limited warranty Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance Related Items Optional Products Product Type Related Model Description Qty. Extended Warranties WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models, 2200-3000VA 1 Extended Warranties WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models, 2200-3000VA or less 1 External Battery Packs BP48V24-2U BP48V242U - External Battery Pack for UPS System 1 External Battery Packs BP48V60RT-3U External Battery Pack and Cable. 3U, Expandable, Blue 2-Point Connector 1 Power Cables P007-006 6-ft. Heavy-Duty 14AWG Power cord (IEC-320-C13 to NEMA 5-15P) 1 Power Cables P007-010 10-ft. Heavy-Duty 14AWG Power cord (IEC-320-C13 to NEMA 5-15P) 1 Power Cables P044-06I 6-inch 12AWG Heavy Duty Power Adapter cord (NEMA-L5-20R to NEMA-5-20P) 1 Power Cables P049-010 10-ft. 12AWG Heavy Duty Power cord (IEC-320-C19 to NEMA 5-20P) 1 Power Distribution PDU1220 Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking equipment 1 Power Distribution PDUB20 Dual source Power Distribution Unit / PDU with Manual Transfer Switch enables Hot-swappable UPS Replacement in Critical Network Applications 1 Power Distribution PDUMH20 Metered PDU / Power Distribution Unit- Safe, reliable power distribution with digital current meter 1 Power Distribution PDUMH20AT Metered PDU with ATS - Power Distribution Unit with dual-input Auto Transfer Switching 1 Power Distribution PDUMH20ATNET Switched, Metered PDU with ATS - Power Distribution Unit with dual-input Auto Transfer Switching, individual outlet control and SNMP network interface 1 Power Distribution PDUMNH20 Monitored PDU / Power Distribution Unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 Power Distribution PDUMNV20 Monitored PDU / Power Distribution Unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 Power Distribution PDUMV20 Metered PDU / Power Distribution Unit - Safe, reliable power distribution with digital current meter 1 Power Distribution PDUMV20NET Switched, Metered PDU with Remote Monitoring - 0U Vertical Rackmount Power Distribution Unit for Networks with Individually Switchable Outlets, Current Metering, Remote Monitoring and Control 1 Power Distribution PDUNV Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking equipment 1 Power Distribution PDUV20 Safe, reliable power distribution for critical networking equipment 1 Rackmount/Wallmount Kits 2POSTRMKITWM Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems 1 Shutdown Cable Kits AS400CABLE KIT Power Management Tools - UPS Communication Cable Kit for System i / AS400 / iSeries Servers 1 SNMP Accessories ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched PDU.) 1 SNMP Accessories SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1 Tower Stands 2-9USTAND Enables Tower Placement of Rackmount UPS Systems 1 UPS Accessories MODBUSCARD For remote monitoring and control via MODBUS protocol 1 UPS Accessories RELAYIOCARD Programmable Relay I/O Card 1 More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=2950. Copyright © 2011 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products. Tripp Lite 1111 West 35th Street Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: saleshelp@tripplite.com Model #: SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. Highlights NEW firmware version 12.04.0052 now available! - supports SNMPv3 Internal SNMP/Web management accessory card Simple installation and setup Data Logging Event Logging Flash Upgradeable Scheduling Email Notification NOTE: Existing 12.04.0048, 12.04.0049 and 12.04.0051 cards can be upgraded to the new firmware to provide SNMPv3 support Description Tripp Lite's SNMPWEBCARD allows network users to operate any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS as a managed device on the network. Enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a web browser. Provides remote viewing of site electrical data, UPS status information and self-test logs. Supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. Optional ENVIROSENSE module provides remote temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom devices. NEW firmware version 12.04.0052 now available! - supports SNMPv3. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier. Existing 12.04.0048, 12.04.0049 and 12.04.0051 cards can be upgraded to the new firmware to provide SNMPv3 support. Applications Ideal for remote management and control of UPS and power data in LAN/WAN racks, computer rooms and datacenter environments Package Includes SNMPWEBCARD Quick Start Installation Guide Configuration Cable Software CD including Owner's Manual & MIB files Cover Plates (secures card in UPS system's SNMP accessory slot) Features NEW firmware version 12.04.0052 now available! - supports SNMPv3 - Existing 12.04.0048, 12.04.0049 and 12.04.0051 cards can be upgraded to the new firmware to provide SNMPv3 support Makes any slot-equipped Tripp Lite UPS a managed device on the network, controllable using SNMP network management platforms or a web browser Web interface provides remote viewing of current site electrical data, UPS self-test and alert logs, as well as logged power events such as blackouts, brownouts, overvoltages, and other electrical problems Offers the ability to control UPS output power and remote reboot of locked network devices without interrupting power to other loads when used with any Tripp Lite UPS equipped with load management receptacles DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned via permanent IP addresses 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network Real-time clock support maintains the time of day and date even if the UPS is shut down NTP (Network Time Protocol) support gives the card the ability to receive automatic updates to its real-time clock from a NTP server 2-tier level access allows an administrator and a guest to log into the web browser for monitoring and/or management of slot-equipped Tripp Lite UPS systems Multiple user support allows for viewing by a number of users at the same time Full Telnet access gives you the ability to remotely monitor and manage your UPS system via a TELNET session Optional SSL (Secure Socket Layer) security setting provides the capability to create an encrypted connection to the card via a web browser Offers the ability to shut down remote operating systems through your networks. (Supported operating systems must have Power Alert 12 installed. SeePowerAlert section for software support) Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification sent to them as a result of a site electrical or UPS problem. Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP RoHS Compliant 2-year product warranty Specifications OVERVIEW Model Type Hardware WARRANTY Product Warranty Period (U.S., Canada & Puerto Rico) 2-year limited warranty Related Items Optional Products Product Type Related Model Description Qty. Environmental Monitoring ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched PDU.) 1 Extended Warranties WEXT3-SNMP 3-Year Extended Warranty - For All SNMP Products 1 Extended Warranties WEXT5-SNMP 5-Year Extended Warranty - For All SNMP Products 1 More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=3968. Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products. Product Specifications MGS400-270 Material ID: 700206733 GigaSPEED® XL MGS400 Series Category 6 U/UTP Information Outlet, gray Dimensions Depth 30.48 mm | 1.20 in Height 20.32 mm | 0.80 in Width 20.32 mm | 0.80 in Electrical Specifications ANSI/TIA Category 6 Contact Resistance Variation, maximum 20 mOhm Contact Resistance, maximum 100 mOhm Current Rating 1.5 A @ 20 °C 1.5 A @ 68 °F Dielectric Withstand Voltage, RMS, conductive surface 1500 Vac @ 60 Hz Dielectric Withstand Voltage, RMS, contacttocontact 1000 Vac @ 60 Hz Insulation Resistance, minimum 500 MOhm Environmental Specifications Flammability Rating UL 94 V0 Operating Temperature 10 °C to +60 °C (+14 °F to +140 °F) Relative Humidity Up to 95%, noncondensing Safety Standard cUL | UL Storage Temperature 40 °C to +70 °C (40 °F to +158 °F) General Specifications Brand GigaSPEED® XL | SYSTIMAX® Cable Type U/UTP (unshielded) Color Gray Product Type Outlet Package, quantity 1 Mechanical Specifications Conductor Gauge, solid 22 AWG | 24 AWG | 26 AWG Conductor Gauge, stranded 22 AWG | 24 AWG Conductor Type Solid | Stranded (7 strands) Material Type Copper alloy | High impact, flame retardant, thermoplastic Outlet/Module Contact Plating Precious metals Plug Insertion Life Test Plug IEC 606037 compliant plug Plug Insertion Life, minimum 750 times ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 2/18/2011 page 1 of 2 1/11/2012 Product Specifications MGS400-270 - Material ID: 700206733 Plug Retention Force, minimum 30 lbf | 133 N Rear Termination Contact Plating Precious metals Rear Termination Type IDC Wiring T568A | T568B Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 2/18/2011 page 2 of 2 1/11/2012 Product Specifications MGS400-361 Material ID: 700206675 GigaSPEED® XL MGS400 Series Category 6 U/UTP Information Outlet, violet Dimensions Depth 30.48 mm | 1.20 in Height 20.32 mm | 0.80 in Width 20.32 mm | 0.80 in Electrical Specifications ANSI/TIA Category 6 Contact Resistance Variation, maximum 20 mOhm Contact Resistance, maximum 100 mOhm Current Rating 1.5 A @ 20 °C 1.5 A @ 68 °F Dielectric Withstand Voltage, RMS, conductive surface 1500 Vac @ 60 Hz Dielectric Withstand Voltage, RMS, contacttocontact 1000 Vac @ 60 Hz Insulation Resistance, minimum 500 MOhm Environmental Specifications Flammability Rating UL 94 V0 Operating Temperature 10 °C to +60 °C (+14 °F to +140 °F) Relative Humidity Up to 95%, noncondensing Safety Standard cUL | UL Storage Temperature 40 °C to +70 °C (40 °F to +158 °F) General Specifications Brand GigaSPEED® XL | SYSTIMAX® Cable Type U/UTP (unshielded) Color Violet Product Type Outlet Package, quantity 1 Mechanical Specifications Conductor Gauge, solid 22 AWG | 24 AWG | 26 AWG Conductor Gauge, stranded 22 AWG | 24 AWG Conductor Type Solid | Stranded (7 strands) Material Type Copper alloy | High impact, flame retardant, thermoplastic Outlet/Module Contact Plating Precious metals Plug Insertion Life Test Plug IEC 606037 compliant plug Plug Insertion Life, minimum 750 times ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 2/18/2011 page 1 of 2 1/11/2012 Product Specifications MGS400-361 - Material ID: 700206675 Plug Retention Force, minimum 30 lbf | 133 N Rear Termination Contact Plating Precious metals Rear Termination Type IDC Wiring T568A | T568B Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 2/18/2011 page 2 of 2 1/11/2012 Product Specifications MGS400-123 Material ID: 700206691 GigaSPEED® XL MGS400 Series Category 6 U/UTP Information Outlet, yellow Dimensions Depth 30.48 mm | 1.20 in Height 20.32 mm | 0.80 in Width 20.32 mm | 0.80 in Electrical Specifications ANSI/TIA Category 6 Contact Resistance Variation, maximum 20 mOhm Contact Resistance, maximum 100 mOhm Current Rating 1.5 A @ 20 °C 1.5 A @ 68 °F Dielectric Withstand Voltage, RMS, conductive surface 1500 Vac @ 60 Hz Dielectric Withstand Voltage, RMS, contacttocontact 1000 Vac @ 60 Hz Insulation Resistance, minimum 500 MOhm Environmental Specifications Flammability Rating UL 94 V0 Operating Temperature 10 °C to +60 °C (+14 °F to +140 °F) Relative Humidity Up to 95%, noncondensing Safety Standard cUL | UL Storage Temperature 40 °C to +70 °C (40 °F to +158 °F) General Specifications Brand GigaSPEED® XL | SYSTIMAX® Cable Type U/UTP (unshielded) Color Yellow Product Type Outlet Package, quantity 1 Mechanical Specifications Conductor Gauge, solid 22 AWG | 24 AWG | 26 AWG Conductor Gauge, stranded 22 AWG | 24 AWG Conductor Type Solid | Stranded (7 strands) Material Type Copper alloy | High impact, flame retardant, thermoplastic Outlet/Module Contact Plating Precious metals Plug Insertion Life Test Plug IEC 606037 compliant plug Plug Insertion Life, minimum 750 times ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 2/18/2011 page 1 of 2 1/11/2012 Product Specifications MGS400-123 - Material ID: 700206691 Plug Retention Force, minimum 30 lbf | 133 N Rear Termination Contact Plating Precious metals Rear Termination Type IDC Wiring T568A | T568B Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 2/18/2011 page 2 of 2 1/11/2012 Product Specifications M10LW-262 Material ID: 108258468 Wall Mount Telephone, one port white l Available for use with the DYMO® labeling solution Dimensions Depth 7.37 mm | 0.29 in Height 71.37 mm | 2.81 in Weight 0.04 kg | 0.08 lb Width 122.17 mm | 4.81 in Environmental Specifications Safety Standard cUL | UL General Specifications Color White Mount Type Flush Total Ports, quantity 1 Product Type Flush mount modular faceplate Application Used with MSeries modular information outlet Package, quantity 1 Mechanical Specifications Material Type Highimpact, flame retardant, ULrated 94 V0, thermoplastic Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/9/2011 page 1 of 1 1/11/2012 Product Specifications M13LE-262 Material ID: 108333113 LE Type Flush Mounted Faceplate, three port white Dimensions Depth 8.38 mm | 0.33 in Height 72.14 mm | 2.84 in Weight 0.04 kg | 0.09 lb Width 122.17 mm | 4.81 in Environmental Specifications Safety Standard cUL | UL General Specifications Color White Mount Type Flush Total Ports, quantity 3 Product Type Flush mount modular faceplate Application Used with MSeries modular information outlet Package, quantity 1 Mechanical Specifications Material Type Highimpact, flame retardant, ULrated 94 V0, thermoplastic Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/2/2011 page 1 of 1 1/11/2012 Product Specifications M14LE-262 Material ID: 108333162 LE Type Flush Mounted Faceplate, four port white l Available for use with the DYMO® labeling solution Dimensions Depth 8.38 mm | 0.33 in Height 72.14 mm | 2.84 in Weight 0.04 kg | 0.08 lb Width 122.17 mm | 4.81 in Environmental Specifications Safety Standard cUL | UL General Specifications Color White Mount Type Flush Total Ports, quantity 4 Product Type Flush mount modular faceplate Application Used with MSeries modular information outlet Package, quantity 1 Mechanical Specifications Material Type Highimpact, flame retardant, ULrated 94 V0, thermoplastic Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/6/2011 page 1 of 1 1/11/2012 Product Specifications M20AP-262 Material ID: 107067928 M20 Dust Cover for MSeries Faceplates and Outlets, white Environmental Specifications Flammability Rating UL 94 V0 Operating Temperature 10 °C to +60 °C (+14 °F to +140 °F) Safety Standard cUL | UL Storage Temperature 40 °C to +70 °C (40 °F to +158 °F) General Specifications Color White Product Type Cover Package, quantity 100 Mechanical Specifications Material Type Highimpact, flame retardant, thermoplastic Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/13/2011 page 1 of 1 1/11/2012 Product Specifications M101SMB-B-246 Material ID: 107984007 M101 Type Surface Mount Box, single port ivory Dimensions Depth 32.77 mm | 1.29 in Height 57.40 mm | 2.26 in Weight 0.04 kg | 0.08 lb Width 30.99 mm | 1.22 in Environmental Specifications Safety Standard cUL | UL General Specifications Mount Type Surface Product Type Surface mount box Application Used with MSeries modular information outlet Color Ivory Package, quantity 1 Total Ports, quantity 1 Mechanical Specifications Material Type Highimpact, flame retardant, ULrated 94 V0, thermoplastic Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: 6/24/2011 page 1 of 1 1/14/2012 OUTDOOR EMERGENCY PHONES VOIP-500 – Single Button Native VoIP Emergency Phone Description The VOIP-500 Series Phone is an outdoor-rated, ADA-compliant hands-free Voice over IP (VoIP) Emergency Phone for use in locations such as: parking facilities, college campuses, medical centers, and industrial parks. Features • • • • • • • • • • • • • • • Exceptional sound clarity during conversation (over 90dB, configurable) and paging (over 100dB, configurable) Unit can be paged remotely by security as part of Talk-A-Phone’s WideArea Emergency Broadcast System (requires WEBS Contact® software) Ethernet connectivity and full IP compatibility with existing routers and LAN infrastructure Additional Layer 2 switch Ethernet port to connect other devices (e.g. IP Video Cameras) Supports standard SIP protocol Configuration and firmware upgrades through Web GUI Power over Ethernet (PoE, 802.3af), 12V DC, 24V AC/DC Cast metal raised letter and Braille signage for ADA compliance Vandal resistant stainless steel faceplate 1.5" diameter metal button painted with UV-resistant finish Auxiliary inputs and outputs to integrate with CCTV, LED Blue Lights, Scream Alert®, Gates and other Access Points Talk-A-Phone’s VOIP-500 Series Phone has tested compatible with Cisco UCM 7.1 and UCM 8.6. The Cisco Compatible logo Three LED indicators for hearing impaired (call placed, call signifies that Talk-A-Phone’s product has undergone interoperability testing by Talk-A-Phone together with Cisco and received, help on the way) a third-party test house based on testing criteria set by Cisco. Talk-A-Phone is solely responsible for the support and warranty Built-in auto-dialer can dial six numbers: if first number doesn't of its product. Cisco makes no warranties, express or implied, with respect to Talk-A-Phone’s product or its interoperation with answer or is busy, dials next number the listed Cisco product(s) and disclaims any implied warranties of merchantability, fitness for a particular use, or against Auto-answer allows security to monitor and initiate calls with infringement. Emergency Phone Automatically inform the attendant of emergency phone location via recorded message Specifications Construction: Dimensions: Weight: Storage Temperature: Operating Temperature: Relative Humidity: Protection: Mounting: Communication: Digit Capacity: Call Control Signaling: 12 gauge (2.8mm) #4 brushed stainless steel faceplate Front Panel: 9.5 (241) W x 11.75 (298) H in (mm) Back Box: 6.4 (163) W x 9.75 (248) H x 2.71 (69) D in (mm) 8 lbs (3.6 kg) -40º F to +149º F (-40º C to +65º C) -40º F to +131º F (-40º C to +55º C) Up to 95% non-condensing Circuit board conformal coated Flush mount (surface mount options available) Full Duplex 2-way hands-free communication Up to 30 digits, including pauses, for each of six phone numbers SIP (RFC3261 compliant) NOTE: Not all features of the VOIP-500 Series Phone are available when used in conjunction with analog telephony adaptor devices or with Public Switched Telephone Network (PSTN). For example, the round robin dialing feature (See "VOIP-500 Configuration and Operation Manual", Section 4.5.1) and voice message functionality (See "VOIP-500 Configuration and Operation Manual", Section 4.7) of the VOIP-500 Series Phone may not operate as described in the manual when used in conjunction with equipment such as a Model VOIP-1-2-4-8 interface, 3rd party gateways, and/or PSTN interfaces such as T1, PRI, or loopstart trunks. Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com. All prices and specifications are subject to change without notice. Talk-A-Phone, WEBS, WEBS Contact and Scream Alert are registered trademarks of Talk-A-Phone Co. Cisco, the Cisco logo, and Cisco Systems are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All rights reserved. VOIP-500 – Single Button Native VoIP Emergency Phone Audio Codecs: Power: Auxiliary Contacts: Network: Programming: Configuration: G.711 PCM a-Law @ 64kbps, G.711 PCM u-Law @ 64kbps, G.729a, G.723.1a Nominal: +12VDC (500mA), +24VAC/DC (300mA), or PoE (+36VDC - 57VDC, 150mA) Max: +12VDC (800mA), +24VAC/DC (500mA), or PoE (+36VDC - 57VDC, 250mA) NOTE: if not connecting PoE, a dedicated line regulated power supply required. 3 Aux Inputs: dry contact, 10mA @ 8VDC 3 Aux Outputs: dry contact, 120mA @ 120VAC/DC 10/100 BaseT Ethernet, RJ45 connectors, Cat 5e or better Non-volatile Flash Memory programming and configuration through Web GUI Static IP address provisioning and DHCP client. Monitoring via Syslog application Options & Accessories "TO CALL" Casting: Faceplate Camera: Use Model VOIP-500C for a button that reads TO CALL instead of EMERGENCY Add “3” to model number to add a color pinhole camera mounted discreetly behind the faceplate. Dimensional Diagram All dimensions are in inches and are provided for reference only. Rev. 6/25/2012 Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • info@talkaphone.com • www.talkaphone.com. All prices and specifications are subject to change without notice. Talk-A-Phone, WEBS, WEBS Contact and Scream Alert are registered trademarks of Talk-A-Phone Co. All rights reserved. EMERGENCY PHONE MOUNTS MS-400 – Flush Mounting Sleeve Description The MS-400 is a mounting sleeve box for flush mounting 100 or 400 Series Talk-A-Phone Emergency Phones. Features • • • Allows for easy mounting of Emergency Phone Conduit entry from bottom or back Extra space included for modular RJ11 Specifications Construction: Dimensions: Weight: Conduit Entry: Cold Rolled Steel 8.6(218) W x 11.25(286) H x 3(76) D in(mm) 3.6 lbs. (1.6 kg) 0.875” hole on back and bottom for 0.5" conduit. 1.125" punch out on back for 0.75" conduit CSA Certified to UL Standard 60950 Compliance: Dimensions All dimensions are in inches Tolerance = ±0.01 in. Copyright 2009 Talk-A-Phone Co. All rights reserved. Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714-3804 Phone 773.539.1100 • Fax 773.539.1241 • info@talkaphone.com • www.talkaphone.com All prices and specifications are subject to change without notice. Talk-A-Phone, Talk-A-Lert, Scream Alert and WEBS are registered trademarks of Talk-A-Phone Co. Rev. 12/29/09 IQeye Alliance-pro H.264 Megapixel IP Dome Camera Features > > > > > > > > > > > > Resolutions up to 5 MP H.264 Main profile + MJPEG Compression 60 fps @ 720p, 30 fps @ 1080p, 10 fps @ 5 MP Remote Zoom and Focus for Easy Installation* Continuous Analog Video Output Two-Way Audio True Day/Night Movable IR Filter exacqVision® Edge and Agent Vi® Compatible On-Camera Storage IP66/NEMA 4 Outdoor Enclosure Direct-to-Storage (DTS) 5 Year Warranty (3 years on auto-focus models) The Alliance-pro is a full featured, multi-megapixel H.264 Main Profile vandal dome camera. With support for up to 5MP resolutions, this camera provides multiple, individually configured H.264 and simultaneous MJPEG streams. Designed with the installer in mind, installation is quick and easy thanks to the remote motorized zoom and focus* (eliminating the need for manual focus adjustments at the camera), a hinged pivoting shroud, and 3-axis gimbal. Dimensions 5.8” 146.2 mm 3.88” 98.6 mm Side (without back box) Top The Alliance-pro can be installed virtually anywhere using Power-over-Ethernet or AC or DC power and supports a movable IR filter for true day and night operation as well as controls for optimizing video for any lighting condition. Two-way audio allows for interactive communication between the camera and monitoring site. The external on camera micro SDHC memory expansion port in combination with IQrecorder, or DirectTo-Storage recording, make the Alliance-pro a flexible stand-alone platform ideal for motion based recording or remote monitoring. *With A2 & A3 lens options 5.42” 137.6 mm Side (with backbox) 33122 Valle Road San Juan Capistrano, CA 92675-4853 USA toll free within US 877.850.0805 phone +1.949.369.8100 fax +1.949.369.8105 www.iqeye.com IQeye Alliance-pro H.264 Megapixel IP Dome Camera Specifications Video Network Compression Supported Protocols TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP, H.264 ProfileMain DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP Sensor 1/3” CMOS, 1/2.5” CMOS for 5 MP multicast, SNMP, FTP, SMTP, Telnet, CIFS JPEG Compression Quality Settings User Configurable Password Protection Secure Multi-level H.264 and MJPEG Shutter SpeedAuto/Programmable/Fixed Image Settings Saturation, Contrast, Brightness, Sharpness, Lightgrabber™ II, IQnightlight Exposure User Configurable White BalanceAuto/Programmable Backlight CompensationAuto IR Range 800 to 940 nm Features Virtual Cameras User Configurable Windows Motion Detection User Configurable Windows Input/Output Input Power Power over Ethernet 802.3af Class 1, Class 2 (NX) 24 VAC, 12-24 VDC Power Consumption < 3.4 W (typical) < 5.2W NX (typical) AC Lighting 50 Hz/60 Hz Selectable Network Interface RJ45 10Base-T/100Base-TX Physical I/O 1 input, 1 output Audio I/O Mic in/Line in, Line out On Camera Storage Micro SD Class 6+ A class 10 or better SDHC memory card is required when edge server applications are running on the camera. Time Lapse Recording User Configurable Event Based Recording User Configurable Flip and Rotate 180, Horizontal, Vertical Misc Focus & Zoom Assist* Auto focus varifocal lenses w/ remote zoom & one-touch focus Vandal Resistance Rating IK10 Analog Video Service Port & Continuous Approvals FCC, CE, UL, cUL (NTSC / PAL) Audio Support Two-way G.711 PCM 8 kHz Temperature Range -4˚F to 122˚F, -20˚C to 50˚C -22˚F to 122˚F, -30˚C to 50˚C (NX) Analytics Ready Yes Weight (grams) 746 g (NI), 1186 g (NE), 1193 g (NX) IQapps and Utilities IQaccess, IQrecorder, IQfinder, IQevent, IQmanager, Direct-to-Storage (DTS) Warranty 5 years (3 years on auto-focus lens models) System Integration exacqVision® Edge, Agent Vi® (SW Licence Required) Lens Options A2 Auto Focus Wide Angle Lens 1/3” ɸ14, 9-22mm, F1.5, IR A3 Auto Focus Wide Angle Lens 1/2.7” ɸ14, 3-8mm, F1.5, IR B5 Wide Angle Lens 1/3” M14, 3-13 mm, F1.4, IR B6 Wide Angle Lens 1/2.5” M14, 3.3-12 mm, F1.4, IR Accessories IQAE-BOX IQA-WM IQA-SS IQ800-PMA *With A2 & A3 lens options Ingress Protection Rating IP66, NEMA 4 (NE/NX) Back Box Wall Mount Adaptor Alliance-pro Sun Shield Pole Mount Adaptor Product Configurations Part Number Maximum Resolution Maximium Frame Rate Minimum Illumination IQA30Nx-B5 SD480p - 720 x 480 30 fps Color: 0.1 lux, B/W: <0.05 lux IQA31Nx-A2, IQA31Nx-A3, IQA31Nx-B5 HD720p - 1280 x 720 60 fps Color: 0.1 lux, B/W: <0.05 lux IQA32Nx-A2, IQA32Nx-A3, IQA32Nx-B5 HD1080p - 1920 x 1080 30 fps Color: 0.2 lux, B/W: <0.05 lux IQA33Nx-B5 3.6 MP - 2560 x 1440 3.1 MP - 2048 x 1536 16 fps 20 fps Color: 0.3 lux, B/W: <0.05 lux IQA35Nx-A3, IQA35Nx-B6 5 MP - 2560 x 1920 10 fps Color: 0.3 lux, B/W: <0.05 lux I - Internal/Indoor 051613 E - External/Outdoor X - Extreme Temperature Outdoor ©2011 IQinVision. IQinVision and the IQinVision logo are trademarks or registered trademarks of IQinVision, registered in the U.S. and other countries. All other trademarks are the property of their respective owners. All rights reserved.

Phase_1_Low_Volt_Sub..

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib