Ethernet over Copper
Transmission Extenders
Ethernet Transmission over
Existing Coaxial or Cat5 Cable
CopperLine is an advanced and
unique technology that extends
Ethernet networks beyond the
100 meter (328 foot) limitation
encountered when using
Cat5 cable for IP Video and IT
specifications. CopperLine is
a cost-saving alternative that
enables you to use existing
coaxial cable and UTP cables
over longer distances.
Choose CopperLine:
• Longest Available
Transmission Distances
• Fixed Data Rate at Maximum
Specified Distance
•
Consumes Less than 2.5 Watts
per Port
• All UTP and Coaxial Cable Models
Support Pass-Through PoE
• Price and Performance –
CopperLine
• Easy extension path – extends Ethernet
Networks beyond 100 m (328 ft) limitation
for CCTV and IT projects
• Saves cost and time – avoids expense of new
Ethernet network equipment
• Switch-selectable LAN rate - optimizes the best
possible rate/distance for each installation
• High data rate – ideal for high bandwidth
requirements of mega-pixel cameras or
multiple IP cameras
• Small package fits inside most camera housings
• Compatible with any LAN device – fully
transparent to Ethernet networks and higher
layer protocols
• Easy to install - no IP address programming or
other network setup required
• LED Indicators provide link status and data rate
• Consumes less than 2.5W per port – can share
power supply with camera
• Supports one or four pairs of UTP wires
• Uses a unique state-of-the-art data
transmission technology
• Meets NEMA TS-1/TS-2 and Caltrans Standards
• Limited lifetime warranty
• Designed and made in the USA
Ethernet over Copper Transmission Extenders
Ethernet over Copper Product Selector
Single Port CopperLine over UTP
NVR
PoE Switch
CLFE1UTP
Multi Port CopperLine over UTP
CLFE16UTP
PoE Switch
NVR
Single Port CopperLine over Coax
CLFE1COAX
PoE Switch
NVR
Multi Port CopperLine over Coax
CLFE16COAX
PoE Switch
NVR
CopperLine 4-Port Switch Extended over UTP or Coax
≤3,000ft (914m) Cat-5
OR
≤5,000ft (1524m) Coax
CLFE16UTP
CLFE16COAX
NVR
PoE Switch
CopperLine Managed High Power Midspan
NVR
Switch
COPPERLINE
CLFE1UTP
CLFE16IPS
CLFE1COAX
Ethernet over Existing Coax or UTP
≤3,000ft
(914m) Cat-5
CLFE1UTP
≤328ft
(100m) Cat-5
PoE Camera
≤3,000ft
(914m) Cat-5
CLFE1UTP
≤328ft
(100m) Cat-5
PoE Camera
CLFE1COAX
≤328ft
(100m) Cat-5
PoE Camera
CLFE1COAX
≤328ft
(100m) Cat-5
PoE Camera
≤5,000ft
(1524m) Coax
≤5,000ft
(1524m) Coax
IP Cameras
CLFE4US1TPC
≤328ft
(100m) Cat-5
≤3,000ft (914m) Cat-5
IP Cameras
CLFE1UTP
Data + Power
PoE Camera
Data +Power
≤5,000ft (1524m) Coax
CLFE1COAX
PoE Camera
MADE IN THE USA | LIFETIME WARRANTY
Ethernet over Copper Transmission Extenders
CopperLine 10/100TX Ethernet over
Unshielded Twisted Pair (UTP)
Part Number
Description
CLFE1UTP
Ethernet over UTP + Pass-through PoE
CLFE4UTP
4 CH Ethernet over UTP + Pass-through PoE
CLFE8UTP
8 CH Ethernet over UTP + Pass-through PoE
CLFE16UTP
16 CH Ethernet over UTP + Pass-through PoE
› T
ransmits individual Ethernet data channels
with Pass-through PoE over standard Cat5 UTP
cable
› E xtends Ethernet up to 3,000 feet (914 m)
over UTP
› E xtended temperature operation from -40C°
to +75C°
› High-data rate, ideal for the high bandwidth
requirements of mega-pixel cameras, multiple
IP cameras systems, and cameras requiring
jumbo frame transmission
COPPERLINE
Ethernet over Existing Coax or UTP
Copperline 10/100TX
Ethernet over coaxial cable
Part Number Description
CLFE1COAX Ethernet over coaxial cable + Pass-through PoE
CLFE4COAX 4 CH Ethernet over coaxial cable + Pass-through PoE
CLFE8COAX 8 CH Ethernet over coaxial cable + Pass-through PoE
CLFE16COAX 16 CH Ethernet over coaxial cable + Pass-through PoE
› Transmits individual Ethernet data channels
with Pass-through PoE over standard 75 ohm
coaxial cable.
› E xtends Ethernet up to 1524 m (5,000 ft)
over coaxial cable
› E xtended temperature operation from
-40C° to +75C°
› E xtended Pass-through PoE meets the
IEEE 802.3af and 802.3at standard for
Power over Ethernet
MADE IN THE USA | LIFETIME WARRANTY
Ethernet over Copper Transmission Extenders
CopperLine Extender Ethernet Switch
Four-Port 10/100TX Aggregation Switch
with Single coaxial cable or UTP Output Port
Part Number
Description
CLFE4US1TPC
4-Port Switch + extended uplink over
coaxial cable or UTP
The ComNet CopperLine™ CLFE4US1TPC is
an unmanaged Ethernet switch that combines
four individual Ethernet data channels over a
single standard 75 ohm coaxial cable or Cat5
UTP cable.
› 4
-port unmanaged switch combines four
individual Ethernet data channels over a
single standard coaxial cable or UTP cable
› E
xtends Ethernet distances: up to 5,000 feet
(1524 m) over coaxial cable; or up to 3000 feet
(914 m) over standard Cat5 UTP
› H
igh Density: High (4) channel count within a
very small package; ideal for those installations
where equipment cabinet space is limited
› C
an be powered using 12 Volts DC or
24 Volts AC
COPPERLINE
Ethernet over Existing Coax or UTP
Copperline High-Power
Mid-Span Injector
Part Number
Description
CLFE8IPS
8-Port, High-Power PoE Midspan Injector
CLFE16IPS
16-Port, High-Power PoE Midspan Injector
The ComNet CopperLine™ CLFE8IPS and
CLFE16IPS are 8- and 16-port high power PoE
midspan power injectors. They meet the
IEEE 802.3af and 802.3at standards and deliver
up to 37W per port without requiring power
management.
› 8 or 16 ports of IEEE 802.3af and IEEE 802.3at
compliant PoE for 10/100/1000 Base-T
networks
› Delivers up to 37W per port simultaneously
on all ports, no power management required
› A
utomatically senses the powered device (PD)
power class
MADE IN THE USA | LIFETIME WARRANTY
Ethernet over Copper Transmission Extenders
Copperline Accessories
Part Number
Description
CLSETUP
PoE Setup Tool
CLESP
Single Port Ethernet Surge Protector
The ComNet CopperLine™ CLESP provides
voltage surge and transient protection for
Ethernet equipment from conditions such as
lighting strikes, power fluctuations or other
transient events.
The CLSETUP provides a simple way to setup
and focus PoE-powered IP cameras, and is an
ideal diagnostic tool for installers working with
both CCTV and IT PoE-based systems.
COPPERLINE
Fiber Optic Video,
Audio and Data
Transmission
Products
ComNet offers a
comprehensive
selection of single and multiple channel video and
data transmission products as well as serial data
and audio transmission products designed to the
specific requirements for Access Control, Intrusion,
Burglar and Fire Alarms and CCTV Surveillance/
Incident Detection and the Intelligent Transportation
Systems (ITS) market.
ComNet manufactures a complete line of in-dome
video and data and Ethernet fiber optic modules for
many of today’s leading CCTV manufacturers.
Technical Support
The ComNet Technical Support and Design Center
provides pre-sale and post-sale support for Ethernet
transmission network and fiber optic system design.
The department is staffed by some of the most highly
experienced, regarded and recognized experts in
the industry.
Our direct Design
Center phone number is
1 (888) 678-9427 or call
1 (203) 796-5300 and ask
for the Design Center, or
contact us by Email at
designcenter@comnet.net.
USA: 3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 1 203 796-5300 | F: 1 203 796-5303
TECH SUPPORT: 1 888 678-9427 | INFO@COMNET.NET
UK: 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY
LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400
F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
For more information on the
complete line of ComNet products
please visit www.comnet.net.
© 2012 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet
Logo,” “CopperLine” and the “CopperLine Logo” are registered trademarks of
Communication Networks. ComNetB8 Rev2 – 06.12