TA INSTRUMENTS
Thermal Analysis
Accessories, Parts, & Consumables
W ORLDWIDE P RICE L IST
Effective January, 2008
L OC AL O FFICES
• New Castle, DE USA
+1-302-427-4000
• Lindon, Utah USA
+1-801-763-1500
• Järfälla, Sweden
+46-8-564-72-200
• Crawley, United Kingdom
+44-1293-658900
• Shanghai, China
+86-21-54263960
• Taipei, Taiwan
+88-62-25638880
• Tokyo, Japan
+813 5759 8500
• Seoul, Korea
+82-2-3415-1500
• Bangalore, India
+91-80-28398963
• Paris, France
+33-1-30-48-94-60
• Eschborn, Germany
+49-6196-400-600
• Brussels, Belgium
• Etten-Leur, Netherlands
• Milano, Italy
+32-2-706-0080
+31-76-508-7270
+39-02-27421-283
• Barcelona, Spain
+34-93-600-9300
• Melbourne, Australia
+61-3-9553-0813
• Mexico City, Mexico
+5255-5524-7636
Thermal Analysis
Q Series™ DSC Accessories
Price US $
970800.901
Pressure DSC Cell
970814.901
Q Series PDSC Cell Shipping Accessory Kit
1,260
900674.901
DSC Quench Cooling Accessory
1,190
901600.901
Tzero™ Sample Press Kit
4,220
935000.902
Photocalorimeter Accessory (PCA) with External Filter Adapter
915064.901
MDSC® Thermal Conductivity Kit
Note: For use with the Q2000/Q20P and Q1000/Q10P models. It provides heat flow measurements at pressures from 1 Pa to 7 Pa.
Note: For use with PDSC Cell and Q2000/Q1000 DSC
Note: For quench cooling of PDSC to -150°C using liquid nitrogen
Note: Includes a Tzero Press and die sets for Tzero Pans/Tzero Lids and Tzero Low-Mass Pans/Tzero Lids; Tzero Pans/Tzero Hermetic Lids; and Standard Aluminum Pans/Lids; Standard Hermetic Pans/Lids respectively. The Kit also includes one box each of
Tzero Pans (100) and Tzero Lids (100).
Note: For use with the Q2000/Q200 DSC models to provide photocuring studies between -50 and 250 °C.
Includes a 32D-480nm external filter.
Q Series DSC Cooling Accessories
17,600
36,500
995
970037.901
Finned Air Cooling System (FACS)
1,810
970036.901
Quench Cooling Accessory for FACS
1,250
972259.901
CCS Cooling System
3,750
970470.901
Recirculator (120V)
3,000
970008.901
Refrigerated Cooling System (RCS90) - 115 V/60 Hz
10,600
Refrigerated Cooling System (RCS) - 230 V/50 Hz. See above comments
10,600
970471.901
970008.902
970508.901
970508.902
200266.001
200245.001
Note: For programmed air cooling of Q Series DSC Cell from 725°C to ambient temperature
Note: Assists FACS in rapid cooling of Q Series DSC Cell to ambient temperature
Note: For programmed cooling of Q2000 Series DSC modules from 500 to -15°C
Recirculator (240V)
3,000
Note: For programmed or quench cooling of the Q Series DSC cells over the temperature range from 550 to -90°C.
Sealed refrigeration system does not require liquid nitrogen.
Refrigerated Cooling System (RCS40) - 115 V/60 Hz
Note: For programmed or quench cooling of the Q Series DSC cells over the temperature range from 400 to -40°C.
Sealed refrigeration system does not require liquid nitrogen. Requires a DSC with QNX module software.
Refrigerated Cooling System (RCS40) - 230 V/50 Hz. See above comments
RCS Dryer For removal of trace moisture in purge gases.
Pressure Regulator [USA only]
Note: For use with the RCS Dryer or the LNCS Purge Gas Purifier Unit; 4000 psi input, 40 psi output; CGA
2
7,420
7,420
445
575
970400.901
Liquid Nitrogen Cooling System [LNCS]
970425.901
LNCS DSC Purge Gas Purifier Unit
3,570
970347.901
Quench Cooling Accessory [QCA]
1,710
970442.001
Inner Manual Lid
970284.901
Manual Cell Cover
970283.001
Note: For programmed or quench cooling of the Q Series DSC Cells from 550 to -180°C.
It can be automatically refilled from an external LN2 source.
Note: For removal of trace moisture in purge gases. Includes gas dryer unit and appropriate shut-off and by-pass valving
Note: For rapid manual cooling of Q Series DSC Cell to subambient temperatures. If used with the Q2000/Q200
or the Q1000/Q100 modules, the part # 970442.001, 970283.001 & 970284.901 must also be purchased.
Outer Manual Lid
13,000
185
300
330
Q Series Replacement DSC Cells
970020.901
970520.901
970020.982
970520.982
970003.901
970004.901
971000.901
970777.901
Note: Replacement Q Series DSC cells do not include silver lids or accessory kits.
User Replacement Cell for Q2000/Q1000 DSC
Cell for Q200/Q100/AQ20/Q20/Q10 DSC modules
Note: Requires separately priced installation by a TA Service Engineer.
Remanufactured Q2000/Q100 User Replacement Cell - As available
Remanufactured Q200/Q100/AQ20/Q20/Q10 DSC modules
Note: As available. Requires separately priced installation by a TA Service Engineer.
Q Series DSC Field Upgrades
Mass Flow Controller Upgrade Kit for Q100/Q10 DSC (Includes Field Service Installation)
MDSC® Upgrade Kit for Q200/Q100 DSC
Autosampler Upgrade Kit for Q200/Q100 DSC (Includes Field Service Installation)
Q2000/Q200 Upgrade Kit
Note: Upgrades the functionality of a Q1000 to a Q2000 or a Q100 to a Q200 respectively. The Kit includes a Display Retrofit Kit
to QNX, Nameplate Kit, new Autosampler tray, Autolids Upgrade Kit, Tzero Press Kit, and Tzero Pans and Tzero Hermetic Lids
(1 box of each). Price includes field installation by a TA service engineer. Some older Q1000/Q100 models may also need
an upgrade of the Single Board Computer (SBC). Contact your TA Service Engineer for information.
Q Series DSC Modules - Replacement Parts
7,900
7,250
7,900
7,250
4,850
11,200
25,900
15,300
970011.901
Accessory Kit, DSC Q2000/Q200 (Supplied with Q2000/Q200 modules)
1,100
970011.903
Accessory Kit, DSC AQ20 (Supplied with the AQ20 module)
1,100
970011.902
Accessory Kit, DSC Q20 (Supplied with the Q20 module)
271580.001
Tweezers, Curved
970830.901
DSC Autolid II Upgrade Kit (Optional Field Service Installation Recommended)
971126.901
DSC Autosampler Tray
3
1,100
45
915
840
Replacement Items for the Q Series DSC Auto Lid ll:
970442.001
Inner Manual Lid
970441.001
Lift Rod
970464.001
910824.001
901600.901
185
Outer Lid
245
30
Cell Cleaning Brush
35
DSC Sample Encapsulation
Tzero™ Sample Press Kit
Note: Includes a Tzero Press and die sets for Tzero Pans/Tzero Lids and Tzero Low-Mass Pans/Tzero Lids; Tzero Pans/Tzero
Hermetic Lids; and Standard Aluminum Pans/Lids; Standard Hermetic Pans/Lids respectively. The Kit also includes one box
each of Tzero Pans (100) and Tzero Lids (100).
4,220
901608.901
Replacement Standard Die Set
995
901608.903
Replacement Tzero Die Set
995
901608.902
901608.904
901608.905
Replacement Hermetic Die Set
995
Replacement Tzero Hermetic Die Set
995
DSC High Volume Die Set
995
Tzero Series DSC Sample Pans and Lids
901670.901
Note: Requires the Tzero Press (part # 901600.901)
Tzero Low-Mass Pans (pkg of 100)
195
901671.901
Tzero Lids (pkg of 100)
125
901684.901
Tzero Hermetic Lids (pkg of 100)
130
901683.901
Tzero Pans (pkg of 100)
215
Standard Series DSC Sample Pans & Lids
Note: (*) Indicates the lids or pans work with the Tzero Press or the Standard Press
900578.901
Platinum Pans (pkg of 10)
900779.901
Aluminum Lids (pkg of 200)*
900786.901
900793.901
900794.901
Aluminum Pans pkg of 200)*
900814.901
High Pressure Capsule Seals (pkg of 20)
900825.901
195
280
Aluminum Lids, Hermetic (pkg of 200)*
High Pressure Pan Kit
900815.901
195
Aluminum Pans, Hermetic (pkg of 200)*
900808.901
1,440
280
Note: Includes metal bell jar & lid, crimping tool, 5 reusable SST capsules & 20 seals
High Pressure Capsules (pkg of 5)
3,140
265
1,070
High Volume Pan Kit
Note: Includes metal bell jar & lid, high volume die sets for Tzero and older Standard Press plus 100 Pans, lids & seals
4
3,770
900824.901
High Volume Die Set (for Standard DSC Press)
900860.901
Hermetic Lids with Pin Hole (pkg of 50)
900825.902
900796.901
900790.901
900868.901
Gold Lids (pkg of 10)*
900874.901
Graphite Pans (pkg of 10)
970345.901
905
150
395
395
Kit, Tzero Calibration, Sapphire
Sapphire, MDSC Calibration
900910.901
1,270
DSC Calibration Materials
970370.901
915061.901
905
Graphite Lids (pkg of 10)
Kit, Calibration Certified DSC Tzero Pan
915060.901
150
905
Copper Pans (pkg of 200)
970475.901
970475.902
280
Gold Pans, Hermetic (pkg of 10)*
Gold Lids, Hermetic (pkg of 10)*
900873.901
280
Gold Pans (pkg of 10)*
900872.901
900867.901
415
Coated Aluminum Lids, Hermetic (pkg of 200)*
Aluminum Pans for SFI Samples (pkg of 200)
900871.901
1,470
Coated Aluminum Pans, Hermetic (pkg of 200)*
900870.901
900866.901
1,310
High Volume Pans, Lids & Seals (pkg of 100)
205
2,000
Kit, Calibration Certified DSC Aluminum Pan
2,000
380
®
Kit DSC/DTA Temperature Calibration
Replacement Certified Indium Reference Material (for part # 915060.901 Kit)
Tin Calibration Material
1,740
730
85
900902.901
Indium Calibration Material
915079.901
Sapphire Specific Heat Material (0.160" OD x 0.020" thick, for standard pans)
190
915079.903
Sapphire Specific Heat Material (0.187" OD x 0.034" thick, for standard pans)
190
900907.901
915079.902
85
Zinc Calibration Material
Sapphire Specific Heat Material (0.135" OD x 0.020" thick, for hermetic pans)
85
190
899096.901
Anisic Acid (a certified temperature calibration material)
670
970489.901
Adamantane (a certified temperature & enthalpy calibration material)
705
899097.901
900319.901
935012.002
935012.001
935002.902
Biphenyl (a certified temperature calibration material)
Kit, DSC Oxidative Stability Calibration
Q Series Photocalorimeter Accessories & Spare Parts
670
2,120
Dual Quartz Light Guide for PCA (-50 to 250°C operation; requires RCS or CCS for subambient use)
6,800
PCA Accessory Kit (replacement only)
7,800
Dual Liquid Light Guide for PCA (-50 to 80°C operation; requires RCS or CCS for subambient use)
Note: TA supplied items required for photocalorimeter operation by customer who already has, or will separately obtain,
the Novacure 2100 analyzer and appropriate dual light guide.
5
7,770
935002.903
PCA Accessory Kit (replacement only)
200700.001
Radiometer (R2000) (for use with the Omnicure S-2000)
3,000
935009.006
Filter, External, 250-450 nm (for the Omnicure S-2000 with external filter adapter)
1,950
935009.002
Filter, External, 320-390 nm (for the Omnicure S-2000 with external filter adapter)
935017.001
935009.001
935009.004
Note: TA supplied items required for photocalorimeter operation by customer who already has, or will separately obtain,
the Omnicure S-2000 analyzer and appropriate dual light guide.
External Filter Adapter (for the Omnicure S-2000)
Filter, External, 320-480 nm (for the Omnicure S-2000 with external filter adapter)
Filter, External, 400-500 nm (for the Omnicure S-2000 with external filter adapter)
935009.003
Filter, External, 365 nm (for the Omnicure S-2000 with external filter adapter)
935006.005
Filter, Internal, 250-450 nm (for use with the Omnicure S-2000)
935009.005
935006.008
935006.007
Blank Filter Holder (for the Omnicure S-2000 with external filter adapter)
Filter, Internal, 320-500 nm (for use with the Omnicure S-2000)
Filter, Internal, 320-390 nm (for use with the Omnicure S-2000)
935006.006
Filter, Internal, 400-500 nm (for use with the Omnicure S-2000)
935006.002
Filter, Internal, 250-450 nm (for the Novacure 2100)
935013.001
Air Filter Kit (pkg of 10)
935006.004
935006.001
935018.901
935019.901
935015.901
935016.901
935021.001
935021.002
901600.901
Filter, Internal, 365 nm (for the Omnicure S-2000)
10,800
1,990
870
870
970
1670
230
930
855
855
930
960
960
Filter, Internal, 320-500 nm (for the Novacure 2100)
860
125
Filter, Longpass, 390 nm (pkg of 2)
455
Filter, Neutral Density, 1 %
335
Filter, Longpass, 490 nm (pkg of 2)
495
Filter, Neutral Density, 10 %
420
Lamp, 100 W, Mercury (For Novacure 2100)
1,930
Lamp, 200 W, Mercury (for Omnicure S-2000)
1,830
Q5000 IR Accessories
Tzero Sample Press Kit
4,220
957352.901
Aluminum Sealed Pan Kit
2,150
957540.901
Die Set TGA
957349.901
TGA/MS Interface Kit
3,500
Replacement Accessory Kit, Q5000 IR
5,410
957468.901
957011.901
Note: For sealing of Q5000 IR Aluminum Pans & lids as defined below; requires Kit part # 957352.901) and Die Set TGA (part # 957540.901)
Note: Consists of 100 Pans, 100 lids, 30 bails, punch alignment tool; dies for use with the Tzero and older standard press.
Note: For use with the Tzero Press and the Sealed Aluminum Pan Kit (part # 957352.901)
TGA/FTIR Adapter Kit
995
4,000
6
Q5000 IR Sample Pans
957207.903
Platinum Sample Pans, 50 µL (pkg of 3)
957571.901
Platinum-HT Sample Pans, 100 µL (pkg of 3)
957329.904
Ceramic Sample Pans, 250 µL (pkg of 3)
685
Aluminum Lids (pkg of 100)
485
957207.904
957329.903
957363.901
957362.901
957364.901
957210.902
957050.901
957050.982
957050.980
957099.901
957216.901
957515.901
Platinum Sample Pans, 100 µL (pkg of 3)
Q5000 IR Replacement Parts
957341.901
957202.001
200266.001
957011.902
730
17,300
Q5000 Infrared Furnace, CFRO
3,000
Q5000 Infrared Furnace, Exchange
8,650
Tray Autosampler TGA
Tray Autosampler - Standard with Q5000 SA; Option for Q5000 IR w/Quartz Crucibles
Loop Decoupler Kit
Brass Tweezers
957381.002
305
Q5000 Infrared Furnace
259508.000
957381.001
380
Kit Sample Pan Quartz (pkg of 3) - Requires Autosampler Tray (part # 957216.901)
Sample Nickel Wire (uncalibrated)
957082.901
610
SST Bail (pkg of 15)
952394.901
900905.901
800
Aluminum Sample Pans, 80 µL (pkg of 100)
Heat Exchanger
259509.000
725
Ceramic Sample Pans, 100 µL (pkg of 3)
953160.901
952377.901
645
910
670
40
3,280
Heat Exchanger Conditioning Kit
35
105
Spatula, SST
80
75
Calcium Oxalate Monohydrate
70
Hook Hangdown
320
Tube Load Q5000 IR Sample
80
Tube Load Q5000 IR Reference
65
TGA Weight Set, Calibrated
135
Crimping Die Set (for use with older standard press)
115
Q5000 SA Accessories
RCS Dryer
Note: For removal of trace moisture in purge gases; one unit supplied with the Q5000 SA.
Replacement Q5000 SA Accessory Kit
7
445
4,730
Q5000 SA Sample Pans
957210.902
Kit Sample Pan Quartz (pkg of 3)
957207.903
Platinum Sample Pans, 50 µL (pkg of 3), Requires part # 957099.901 (see below) for use with Q5000 SA
957210.903
957207.904
957216.901
957099.901
Kit Sample Pan Quartz - Metal Coated (pkg of 3)
Platinum Sample Pans, 100 µL (pkg of 3), Requires part # 957099.901 (see below) for use with Q5000 SA
Q5000 SA Replacement Parts
Tray Autosampler Humidity Chamber (10-position)
Tray Autosampler TGA (25-position) - Required for use with Platinum or Aluminum Pans
957515.901
Loop Decoupler Kit
953160.901
Heat Exchanger
259509.000
Spatula, SST
957381.003
Tube Load Q5000 SA Sample/Reference
957082.901
952377.901
259508.000
957156.901
957400.901
953350.901
730
Hook Hangdown
1,030
645
725
670
910
40
320
3,280
Heat Exchanger Conditioning Kit
35
80
Brass Tweezers
75
65
Replacement Sensor Kit for Humidity Chamber
240
TGA Cal Set (Calibrated)
1,250
Q500/Q50 TGA Accessories & Field Upgrades
Upgrade Kit, TGA High Resolution™ (Upgrades Q500 for High Resolution operation)
5,630
Upgrade Kit, Q500 Autosampler (Upgrades Q500 for autoSampler operation. Includes field installation.)
11,400
952011.901
Accessory Kit TGA (Supplied with Q500/Q50 modules)
2,980
957481.901
Event Cable, FTIR
953450.901
953150.901
953046.901
271001.002
920247.901
Upgrade Kit, Modulated TGA ™ (Upgrades Q500 for Modulated TGA operation)
Evolved Gas Furnace (EGA) (Recommended for evolved gas analysis with MS or FTIR)
Q500/Q50/MS Interface Kit
4,710
5,900
3,300
120
Display Retrofit Kit to QNX
Note: Upgrades a Q500 TGA, Q600 SDT, Q400 TMA and Q800 DMA, from VRTX to QNX operation. The Kit includes
the latest Advantage software, Platinum features and full VGA display. Installation and basic training is also included.
Contact your TA Instruments Service Engineer for further information.
Q500/Q50 Sample Pans
7,150
952018.906
Platinum Sample Pans, 100 µL (pkg of 3)
725
952018.908
Platinum Sample Pans, 50 µL (pkg of 3)
620
952018.907
952018.909
952018.910
952323.902
Ceramic Sample Pans, 100 µL (pkg of 3)
595
Ceramic Sample Pans, 250 µL (pkg of 3)
660
Ceramic Sample Pans, 500 µL (pkg of 3)
760
Aluminum Sample Pans, 100 µL (pkg of 12)
200
8
Q500/Q50 Replacement Parts
259508.000
Brass Tweezers
75
952040.902
Tare hangdown Wire
90
952040.901
952040.903
Sample hangdown Wire
Wire hangdown Tare (w/o tare tube) - used in latest Q500/Q50 TGA
952110.001
Tube, Hangdown Wire
953208.901
Sample Thermocouple
952256.901
952240.901
952357.901
953032.901
953032.980
953160.901
952377.901
952541.902
952541.901
90
Kapton hangdown Loop (strip of 10)
90
75
110
®
485
Auto Q500 multiple Sample Tray Kit
1,170
Furnace Tube (quartz) w/Seals Kit and Instructions
1,180
Replacement Q500, Q50 furnace
6,040
Q500, Q50 Damaged Furnace
Exchange Credit 1,100
Heat Exchanger, TGA Q500/Q50
3,280
Conditioning Kit, TGA Q500/Q50 Heat Exchanger
35
Q5000/Q500/Q50 Calibration & Test Materials
TGA/SDT ICTAC Curie Point Reference Materials Kit for Q5000 IR
1,760
TGA/SDT ICTAC Curie Point Reference Materials Kit
1,940
Note: Includes 0.5 g each of the six ICTAC Certified material listed below
Note: Includes 0.5 g each of the six ICTAC Certified material listed below
952500.901
Replacement ICTAC Certified Curie Point Reference Material 153°C
705
952508.901
Replacement ICTAC Certified Curie Point Reference Material 554°C
705
952516.901
Replacement ICTAC Certified Curie Point Reference Material 931°C
952504.901
952512.901
Replacement ICTAC Certified Curie Point Reference Material 357°C
Replacement ICTAC Certified Curie Point Reference Material 746°C
952520.901
Replacement ICTAC Certified Curie Point Reference Material 1116°C
952385.901
Replacement Certified Nickel Reference Material (for Kit part # 952384.901)
952540.901
TGA/SDT Mass Loss Reference Materials Kit (Includes 1 gm each of the three materials listed below)
952384.901
952398.901
952524.901
952528.901
952532.901
952011.906
900905.901
705
705
705
705
TGA/SDT Temperature calibration Kit (Alumel & Nickel Reference materials)
1,100
Replacement Certified Alumel Reference Material (for Kit part # 952384.901)
705
Mass Loss Reference Material ( 2% solution)
Mass Loss Reference Material ( 49% solution)
705
1,940
705
705
Mass Loss Reference Material ( 98% solution)
705
Set of Class M Weights (100 mg; 1g)
1,110
Calcium Oxalate
70
9
SDT Q600 Accessories
271001.002
Q600/MS Interface Kit
3,300
920247.901
Display Kit Rettrofit to QNX
7,150
957481.901
Event Cable, FTIR
120
Note: Upgrades a Q600 SDT, Q500 TGA, Q400 TMA and Q800 DMA, from VRTX to QNX operation. The Kit includes
the latest Advantage software, Platinum features and full VGA display. Installation and basic training is also included.
Contact your TA Instruments Service Engineer for further information.
SDT Q600 Sample Pans
960070.901
Alumina Sample Cups; 90 µL (pkg of 3)
140
960148.901
Platinum Sample Cups; 40 µL (pkg of 3)
290
960239.901
Alumina lids; (pkg of 3) for use with part # 960070.901
960072.901
960149.901
961011.901
960017.901
Alumina Sample Cups;40 µL (pkg of 3)
Platinum Sample Cups; 110 µL (pkg of 3)
Calibration Weights Set
961020.980
2,200
Dual Beam Thermocouple Kit, SDT Q600
960014.901
961020.901
90
Accessory Kit Q600 (Supplied with the Q600 module)
Brass Tweezers
960059.001
390
SDT Q600 Replacement Parts
259508.000
270198.015
140
1,340
75
O-ring, Furnace Tube
9
215
Contact Thermocouple Wire
150
Q600 SDT Furnace
8,490
Q600 SDT Furnace
Exchange Credit 1,300
SDT Q600 Calibration and Test Materials
952541.901
TGA/SDT ICTAC Curie Point Reference Materials Kit
952500.901
Replacement ICTAC Certified Curie Point Reference Material 153°C
705
952508.901
Replacement ICTAC Certified Curie Point Reference Material 554°C
705
952516.901
Replacement ICTAC Certified Curie Point Reference Material 931°C
952504.901
952512.901
Note: Includes 0.5 g each of the six ICTAC Certified material listed below.
Replacement ICTAC Certified Curie Point Reference Material 357°C
Replacement ICTAC Certified Curie Point Reference Material 746°C
952520.901
Replacement ICTAC Certified Curie Point Reference Material 1116°C
952385.901
Replacement Certified Nickel Reference Material (for Kit part # 952384.901)
952384.901
TGA/SDT Temperature Calibration Kit (Alumel & Nickel Reference materials)
10
1,760
705
705
705
705
1,100
705
952398.901
Replacement Certified Alumel Reference Material (for Kit part # 952384.901)
952540.901
TGA/SDT Mass Loss Reference Materials Kit (Includes 1 gm each of the three materialS listed below)
960034.901
952524.901
952528.901
952532.901
960234.901
900905.901
945300.901
Aluminum Oxide Reference Material (Calcined Alpha)
Mass Loss Reference Material (2% solution)
Mass Loss Reference Material (49% solution)
705
75
1,940
705
705
Mass Loss Reference Material (98% solution)
705
Zinc Calibration Material
60
Calcium Oxalate
70
TMA Q400/400EM Accessories & Upgrade Kits
Mechanical Cooling Accessory MCA 70 (115 V operation)
10,500
945300.902
Mechanical Cooling Accessory MCA 70 (230 V operation)
10,500
945050.901
TMA Film/Fiber Accessory Kit
3,320
944202.901
Dilatometer Accessory Kit
2,710
944203.902
Flexure Accessory Kit (for Q400 use; supplied with Q400EM)
2,110
944204.901
Parallel Plate Rheometer Accessory Kit
3,200
270134.001
Flow Meter
944200.901
945250.901
920247.901
Note: For programmed or quench cooling of the Q400/Q400EM over temperature range 400 to -70 °C.
Sealed refrigeration system does not require liquid nitrogen.
Note: For programmed or quench cooling of the Q400/Q400EM over temperature range 400 to -70 °C.
Sealed refrigeration system does not require liquid nitrogen.
Note: Consisting of film/fiber sample stage, film/fiber probe assembly, vial of cleaved aluminum balls, film clamp assemblies,
film clamp fixture, jeweler's screwdriver, and film clamp screws
Note: Consisting of dilatometer probe assembly, three dilatometer sample vials, two vials of filling medium, and a vial of
Aluminum calibration standard
Note: Includes flexure probe assembly, flexure sample platform & phase cal jig
Note: Consisting of rheometer sample-forming die set, three rheometer alignment cages, and six rheometer parallel plates
Note: For purge gas regulation (14.8 to 148 mL/min) of earlier TMA Q400/400EM without mass flow control.
A digital mass flow controller upgrade is highly recommended - contact TA Service.
TMA Q400/400EM Accessories & Upgrade Kits
495
Accessory Kit Q400 (Supplied with Q400/Q400 EM modules)
5,250
Upgrade Kit Q400 to Q400EM (includes Flexure Accessory Kit part # 944203.902)
7,880
Note: the Flexure Accessory Kit (part # 944203.901) is also supplied with the Q400 EM; a customer wanting to replace the entire
Q400 EM Accessory Kit must purchase part # 945250.901 and part # 945203.902.
Display Kit Retrofit to QNX
Note: Upgrades a Q400 TMA, Q500 TGA, Q600 SDT and Q800 DMA, from VRTX to QNX operation. The Kit includes
the latest Advantage software, Platinum features and full VGA display. Installation and basic training is also included.
Contact your TA Instruments Service Engineer for further information.
11
7,150
TMA Q400/400EM Replacement Parts
944120.901
Sample Stage
944123.901
Macro-expansion Probe Assembly
944122.901
944124.901
941143.000
944125.901
944126.901
944127.901
725
Expansion Probe Assembly
1,680
Dilatometer Probe Assembly
1,680
1,680
Dilatometer Sample Vial
230
Hemispherical Probe Assembly
1,680
Flexure Probe Assembly
1,460
Penetration Probe Assembly
1,680
945045.901
3-Point Bend Calibration Jig
944121.901
Film/Fiber Sample Holder
1,430
Film/Fiber Upper Clamp
330
941054.000
945051.901
945052.901
945053.901
945054.001
944330.901
944217.901
991400.902
984350.901
985011.901
920247.901
984048.901
984047.901
325
Film Clamp Screws #0-80 (pkg of 10)
Protective Quartz for Sample Stage (pkg of 20)
944206.901
250
Film Clamp Fixture
944341.901
915061.901
1,950
Film/Fiber Lower Clamp
Vial of Cleaved Aluminum Balls
944344.902
340
Film/Fiber Probe Assembly
941038.901
941148.901
175
Platform Flexure
7
125
Filling Medium - Dilatometer Vial
145
Thermocouple, TMA Kit
265
915
TMA Q400/400EM Calibration Materials
Replacement Certified Indium Reference Material
TMA Certified Temperature and Dimension Calibration Kit
Replacement Certified Aluminum Reference Material
Q800 DMA Accessories
730
1,850
710
Gas Cooling Accessory with Auto Tank Fill (CE compliant)
11,100
Accessory Kit, Q800 (supplied with the Q800 module)
3,780
Air Compressor
2,580
Display Kit Rettrofit to QNX
Note: Upgrades a Q800 DMA, Q500 TGA, Q400 TMA and Q600 SDT, from VRTX to QNX operation. The Kit includes
the latest Advantage software, Platinum features and full VGA display. Installation and basic training is also included.
Contact your TA Instruments Service Engineer for further information.
Q800 DMA Clamp Kits
8 mm Single/Dual Cantilever Clamp Kit
7,150
3,270
20 mm Single/Dual Cantilever Clamp Kit
3,270
12
984015.901
35 mm Single/Dual Cantilever Clamp Kit (supplied with Q800 module)
3,270
984014.901
3-point Bending Clamp Kit (20 & 50 mm lengths)
3,270
984026.901
984018.901
3-point Bending Clamp Kit (5, 10, & 15 mm lengths)
3,270
Parallel Plate Compression Clamp Kit (includes 15 & 40 mm plates)
4,770
984016.901
Film/Fiber Tension Clamp Kit
3,270
984017.901
Shear Sandwich Clamp Kit
984022.901
984023.901
985067.901
985068.901
985069.901
985070.901
984486.901
985164.901
984003.901
Penetration Clamp Kit
Specialty Fiber Tension Clamp Kit
3,490
3-Point Bend Clamp Kit (20 mm, low friction)
3,640
815
Powder Kit for 35 mm Cantilever Clamp
1,580
Q800 DMA Replacement Parts
Replacement Furnace
5,190
70
Telescoping Gauge (for 10 mm single cantilever clamps)
100
Control Thermocouple (90 mm length)
225
130
Sample Thermocouple (130 mm length)
984370.901
Furnace Inlet Ferrule/Spring Kit
270975.001
Filter Replacement, Auto Drain Regulator
270976.002
9,150
Film Cutting Kit
Telescoping Gauge (for 17 mm single cantilever clamps)
985199.902
7,010
3-Point Bend Clamp Kit (50 mm, low friction)
270962.002
985199.901
3,270
Submersion Film/Fiber Tension Clamp Kit
Brass Tweezers
270962.001
3,270
Submersion Compression Clamp Kit
259508.000
225
45
Filter/Regulator with Auto Drain
1,490
95
Q800 DMA Calibration & Test Materials
900902.901
Indium Temperature Calibration Sample
984310.901
Indium Wire, Film/Fiber Temperature Calibration (pkg of 10 pieces, 38 mm long)
982161.902
ABS Sample (3.18 mm thick, 61 mm long, pkg of 5)
900907.901
980228.902
982161.903
982165.903
982165.904
984309.901
984313.901
3,270
Zinc Temperature Calibration Sample
Glass Support Cloth (0.2 mm thick, 33 m length)
80
80
135
390
55
ABS Sample (3.18 mm thick, 36 mm long, pkg of 5)
Polycarbonate Sample (1.6 mm thick, 36 mm long, pkg of 5)
Polycarbonate Sample (0.79 mm thick, 36 mm long, pkg of 5)
Polyethylene Terephthalate (PET) Film (pkg of 10 pieces, 38 mm long)
PET Fiber (910 mm long)
13
55
55
55
55
55
Replacement 2920 DSC Cells
Accessory Kits and instruction manuals not supplied
915201.901
Replacement Standard DSC Cell - 2920
5,630
915201.920
Replacement Standard DSC-RCS Cell - 2920
5,630
815201.901
815201.920
Replacement Standard DSC Cell - 2920 - CE Compliant
6,140
Replacement Standard DSC-RCS Cell - 2920 - CE Compliant
5,730
Replacement 2910 DSC Cells
900610.905
900610.920
911306.901
900674.901
Accessory Kits and instruction manuals not supplied
Replacement Standard DSC Cell - 2910
5,480
Replacement Standard DSC-RCS Cell - 2910
5,480
Replacement DSC 2010 Cell
Replacement DSC Cell - 2010 (Requires installation by TA Service Engineer)
DSC 2920/2910 Accessories
DSC Quench Cooling Accessory
NOTE: For programmed cooling operation to -120 °C, and quench cooling to -180 °C. using liquid nitrogen. Includes bell jar, O-ring,
and thermal resistor disc.
5,810
1,190
270134.001
Flow Meter
495
270134.002
Dual Flow Meter
770
992300.901
Gas Switching Accessory - CE Compliant
NOTE: For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel float, R-2-15-AAA tube, valve location at inlet, In/Out
connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of
1/4 inch (6.35 mm) tygon tubing.
NOTE: For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel floats, two R-2-15-AAA tubes, valve location at inlet,
In/Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m)
of 1/4 inch (6.35 mm) tygon tubing.
Note: Automatically switches between two purge gases; manual override provided
Standard Series DSC Sample Press Replacement Parts
900530.901
Upper Crimping Die Set Assembly
900719.001
Preforming Tool, for sealing hermetic pans (Blue Press)
900752.901
258825.000
900720.000
Lower Crimping Die Assembly
4,200
710
620
130
Spring for Lower Crimping Die
9
Die, Hermetic Sealing
170
14
Standard Series DSC Sample Pans & Lids
900578.901
Platinum Pans (pkg of 10)
900779.901
Aluminum Lids (pkg of 200)
900794.901
Aluminum Lids, Hermetic (pkg of 200)
900786.901
900793.901
Aluminum Pans (pkg of 200)
High Pressure Pan Kit
900814.901
High Pressure Capsule Seals (pkg of 20)
900815.901
900825.901
195
195
Aluminum Pans, Hermetic (pkg of 200)
900808.901
1,440
280
280
Note: Includes metal bell jar & lid, crimping tool, 5 reusable SST capsules & 20 seals.
High Pressure Capsules (pkg of 5)
3,140
265
1,070
High Volume Pan Kit
3,770
900824.901
High Volume Die Set
1,310
900860.901
Hermetic Llids with Pin Hole (pkg of 50)
900825.902
900796.901
Note: Includes metal bell jar & lid, die sets for Tzero & older Standard press, 100 Pans, lids & seals.
High Volume Pans, Lids & Seals (pkg of 100)
1,470
415
Coated Aluminum Pans, Hermetic (pkg of 200)
280
900870.901
Aluminum Pans for SFI Samples (pkg of 200)
150
900868.901
Gold Lids (pkg of 10)
900790.901
900866.901
900871.901
Coated Aluminum lids, Hermetic (pkg of 200)
Gold Pans (pkg of 10)
Gold Lids, Hermetic (pkg of 10)
900874.901
Graphite Pans (pkg of 10)
900873.901
900155.000
900681.002
900719.000
910824.001
900635.000
905
905
Gold Pans, Hermetic (pkg of 10)
900872.901
900867.901
280
1,270
905
Copper Pans (pkg of 200)
150
395
Graphite lids (pkg of 10)
395
DSC Replacement Parts
Bell Jar for DSC Cells
225
Preforming Tool, for Hermetic Pans (Beige Press)
130
Bell Jar for DSC Cooling Accessory
335
DSC Cell Fiberglass Cleaning Brush
35
Silver Lid (standard cell)
255
990687.001
Cell Lid, Silver w/Hole #2
315
990686.001
Lid, Aluminum # 3
991123.001
990686.002
900969.001
Silver Inner Lid # 1 (RCS cell)
315
Lid Cooling Can SST # 2
65
65
Silver Lid (pressure DSC cell)
310
15
DSC Calibration Materials
915060.901
DSC/DTA Temperature Calibration Kit
900910.901
Tin Calibration Material
915061.901
Replacement Certified Indium Reference Material (for part # 915060.901 Kit)
1,740
730
85
900902.901
Indium Calibration Material
915079.901
Sapphire Specific Heat Standard (0.160" OD x 0.020" thick, for standard pans)
190
915079.903
Sapphire Specific Heat Standard (0.187" OD x 0.034" thick, for standard pans)
190
900907.901
915079.902
Sapphire Specific Heat Standard (0.135" OD x 0.020" thick, for hermetic pans)
899096.901
Anisic Acid
900319.901
Kit, DSC Oxidative Stability Calibration
899097.901
915064.901
900786.901
85
Zinc Calibration Material
Biphenyl
85
190
670
670
2,120
MDSC Thermal Conductivity Kit
995
®
Auto DSC 29XX Replacement Parts
Aluminum Pans, Standard (pkg of 200)
195
Aluminum Pans, Hermetic (pkg of 200)
280
Copper Pans, Auto DSC (pkg of 200)
255
900779.901
Aluminum Lids, Standard (pkg of 200)
900794.901
Aluminum Lids, Hermetic (pkg of 200)
990685.001
Auto DSC Sample Pan Lower Die for Sample Press
991123.003
Auto Sampler, Silver Lid (RCS cell)
300
Gripper Assembly
315
900793.901
900867.902
990687.001
Sample Tray, Lid
990980.901
Sample Tray, Multiposition
930001.001
900410.901
917010.901
360
315
205
730
DPC 931/930 Replacement Part
Lamp, DPC, 200 W Hg.
860
High Temperature DTA Replacement Parts
Pt-Pt/13% Rh Thermocouple Assembly (matched pair) - for 2910 DTA Cell
Pt-Pt/13% Rh Thermocouple Assembly (matched pair) - for 2920 DTA Cell
900936.001
Alumina Furnace Tube (For 1600°C DTA Cell)
900713.901
Platinum Macro Sample Cups (pkg of 4)
900710.901
280
Auto Sampler, Silver Lid (standard cell)
990688.901
990717.901
195
Platinum Micro Sample Cups (pkg of 4)
670
640
475
1,310
1,390
16
900711.901
900712.901
900906.901
952431.901
Platinum Macro Sample Cap Liners (pkg of 10)
795
Alumina Macro Sample Cup Liners (pkg of 6)
490
Aluminum Oxide Reference Material
75
TGA 2950/2050 Accessories & Field Upgrades
Evolved Gas Furnace (EGA) for TGA 2950/2050
6,010
852352.901
Evolved Gas Furnace (EGA) for TGA 2950/2050 - CE Compliant
8,890
992300.901
Gas Switching Accessory - CE Compliant
4,200
270134.901
Flow Meter for purge gas regulation (14.8 - 148 mL/min. air)
495
270134.002
Dual Flow Meter, for purge gas regulation (14.8 - 148 mL/min. air)
770
Note: Recommended for evolved gas analysis with MS or FTIR. Requires installation by TA Service Engineer.
Note: Recommended for evolved gas analysis with MS or FTIR. Requires installation by TA Service Engineer.
Note: Automatically switches between two purge gases; manual override provided.
NOTE: For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel float, R-2-15-AAA tube, valve location at inlet, In/Out
connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of
1/4 inch (6.35 mm) tygon tubing.
NOTE: For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel floats, two R-2-15-AAA tubes, valve location at inlet,
In/Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m)
of 1/4 inch (6.35 mm) tygon tubing.
TGA 2950/2050 Sample Pans
952018.906
Platinum Sample Pans, 100 µL (pkg of 3)
725
952018.908
Platinum Sample Pans, 50 µL (pkg of 3)
620
952018.907
952018.909
952018.910
952323.902
259508.000
952011.906
952013.982
952013.980
952040.901
952040.902
Ceramic Sample Pans, 100 µL (pkg of 3)
Ceramic Sample Pans, 250 µL (pkg of 3)
660
Ceramic Sample Pans, 500 µL (pkg of 3)
760
Aluminum Sample Pans, 100 µL (pkg of 12)
200
TGA 2950/2050 Replacement Parts
Brass Tweezers
Set of Class M Weights (100 mg, 1 g)
6,040
Damaged Furnace
Exchange Credit 1,240
Sample Hangdown Wire
90
Tare Hangdown Wire
Sample Thermocouple
952011.901
Accessory Kit, TGA 2950
75
1,110
Rebuilt TGA 2950 Furnace
952068.901
952121.001
595
90
200
Work Surface Tray
200
2,980
17
952110.001
Tube, Hangdown Wire
952240.901
Auto TGA 2950 Multiple Sample Tray Kit
952160.901
952256.901
952357.901
952377.901
952541.901
75
Heat Exchanger, TGA 2950
3,280
1,170
Kapton hangdown Loop (strip of 10)
®
Furnace Tube (quartz)/Seals Kit/Instructions for EGA Furnace
Conditioning Kit, TGA 2950/2050 Heat Exchanger
TGA 2950/2050 Calibration, Reference & Test Materials
TGA/SDT ICTAC Curie Point Reference Materials Kit
Note: Includes 0.5 g each of the six ICTAC Certified materials listed below.
110
1,180
35
1,940
952500.901
Replacement ICTAC Certified Curie Point Reference Material 153°C
705
952508.901
Replacement ICTAC Certified Curie Point Reference Material 554°C
705
952516.901
Replacement ICTAC Certified Curie Point Reference Material 931°C
952504.901
952512.901
Replacement ICTAC Certified Curie Point Reference Material 357°C
Replacement ICTAC Certified Curie Point Reference Material 746°C
705
705
705
952520.901
Replacement ICTAC Certified Curie Point Reference Material 1116°C
952385.901
Replacement Certified Nickel Reference Material (for Kit part # 952384.901)
952540.901
TGA/SDT Mass Loss Reference Materials Kit
1,940
952524.901
Mass Loss Reference Material (2% solution)
705
952532.901
Mass Loss Reference Material (98% solution)
705
952384.901
952398.901
952528.901
900905.901
705
TGA/SDT Temperature Calibration Kit (Alumel & Nickel reference materials)
1,100
Replacement Certified Alumel Reference Material (for Kit part # 952384.901)
705
Note: Includes 1 gm each of the three materials listed below.
Mass Loss Reference Material (49% solution)
705
705
Calcium Oxalate
70
SDT 2960 Accessories
270134.001
Flow Meter
495
270134.002
Dual Flow Meter
770
992300.901
Gas Switching Accessory - CE Compliant
Note: For purge gas regulation (14.8 - 148 mL/min. air). For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel float,
R-2-15-AAA tube, valve location at inlet, In/Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base
with level. Also includes 25 feet (7.64 m) of 1/4 inch (6.35 mm) tygon tubing.
NOTE: For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel floats, two R-2-15-AAA tubes, valve location at inlet,
In/Out connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m)
of 1/4 inch (6.35 mm) tygon tubing.
Note: Automatically switches between two purge gases; manual override provided
18
4,200
SDT 2960 Sample Pans
960070.901
Alumina Sample cups, 90 µL (pkg of 3)
140
960148.901
Platinum Sample cups, 40 µL (pkg of 3)
290
960239.901
Alumina lids; pkg of 3 (for use with part # 960070.901)
960072.901
960149.901
259508.000
270198.015
960017.901
960059.001
952541.901
Alumina Sample cups, 40 µL (pkg of 3)
140
Platinum Sample cups, 110 µL (pkg of 3)
390
90
SDT 2960 Replacement Parts
Brass Tweezers
75
O-ring, Furnace Tube
9
Dual Beam Thermocouple Kit, SDT 2960
1,340
Contact Thermocouple Wire
150
SDT 2960 Calibration, Reference & Test Materials
TGA/SDT ICTAC Curie Point Reference Materials Kit (Includes 0.5 g each of the six ICTAC Certified materials listed below)
952500.901
Replacement ICTAC Certified Curie Point Reference Material 153°C
952508.901
Replacement ICTAC Certified Curie Point Reference Material 554°C
952516.901
Replacement ICTAC Certified Curie Point Reference Material 931°C
952504.901
952512.901
Replacement ICTAC Certified Curie Point Reference Material 357°C
Replacement ICTAC Certified Curie Point Reference Material 746°C
952520.901
Replacement ICTAC Certified Curie Point Reference Material 1116°C
952385.901
Replacement Certified Nickel Reference Material (for Kit part # 952384.901)
960034.901
Aluminum Oxide Reference Material (calcined alpha)
952384.901
952398.901
952540.901
952524.901
952528.901
952532.901
900905.901
960234.901
960014.901
945050.901
1,760
705
705
705
705
705
705
TGA/SDT Temperature Calibration Kit (Alumel & Nickel reference materials)
1,100
Replacement Certified Alumel Reference Material (for Kit part # 952384.901)
705
TGA/SDT Mass Loss Reference Materials Kit (Includes 1 gm each of the three materials listed below)
Mass Loss Reference Material (2% solution)
Mass Loss Reference Material (49% solution)
705
75
1,940
705
705
Mass Loss Reference Material (98% solution)
705
Calcium Oxalate
70
Zinc Standard Material
60
Calibration Weights Set
215
TMA 2940 Accessories
Film/Fiber Accessory Kit
Note: Consisting of film/fiber sample stage, film/fiber probe assembly, vial of cleaved aluminum balls, film clamp assemblies,
film clamp fixture, jeweler's screwdriver (2 mm), and 10 film clamp screws (#0-80).
19
3,320
944202.901
Dilatometer Accessory Kit
2,710
944203.902
Flexure Accessory Kit (Includes flexure probe assembly and flexure Sample platform)
2,110
Note: Consisting of dilatometer probe assembly, three dilatometer sample viles, two vials of filling medium, and a vial of
Aluminum calibration standard.
944204.901
Parallel Plate Rheometer Accessory Kit
270134.001
Flow Meter
Note: Consisting of rheometer Sample-forming die set, three rheometer alignment cages, and six rheometer parallel plates.
NOTE: For purge gas regulation (14.8 - 148 mL/min. air). Stainless steel float, R-2-15-AAA tube, valve location at inlet, In/Out
connections at back, brass fittings for 1/4 inch (6.35 mm) I.D. hose, tripod base with level. Also includes 25 feet (7.64 m) of
1/4 inch (6.35 mm) tygon tubing.
TMA 2940 Replacement Parts
944120.901
Sample Stage
944123.901
Macro-expansion Probe Assembly
944122.901
944124.901
941143.000
944125.901
944126.901
944127.901
Dilatometer Probe Assembly
1,680
1,680
Flexure Probe Assembly
1,390
Penetration Probe Assembly
Film/Fiber Lower Clamp
944217.901
330
7
325
Filling Medium - Dilatometer Vial
145
Thermocouple, TMA Kit
265
Protective Quartz for Sample Stage
944206.901
2,560
Film Clamp Fixture
944341.901
915061.901
1,430
250
Film Clamp Screws #0-80 (pkg of 10)
Vial of Cleaved Aluminum Balls
944344.902
1,680
Film/Fiber Upgrade Kit (includes Q400 probe, clamps and clamping fixture)
941038.901
941148.901
230
Hemispherical Probe Assembly
Film/Fiber Upper Clamp
945054.901
1,680
Dilatometer Sample Vial
945052.901
944330.901
725
1,680
Film/Fiber Sample Holder
945053.901
495
Expansion Probe Assembly
944121.901
945050.902
3,200
125
915
TMA 2940 Calibration & Reference Materials
Replacement Certified Indium Reference Material
TMA Certified Temperature & Dimension Calibration Kit
730
1,850
Replacement Certified Aluminum Reference Material
710
20
DMA Q800 Clamping Fixtures & Other Accessories
991400.902
Gas Cooling Accessory - Auto Tank Fill (For cooling to -150°C)
11,100
984048.901
8 mm Single/Dual Cantilever Kit
3,270
984015.901
35 mm Single/Dual Cantilever Kit (included with DMA)
984014.901
3-point Bending Kit (20 & 50 mm lengths)
984350.901
984047.901
984026.901
984018.901
984022.901
985016.901
984023.901
984017.901
Air Compressor Accessory (for use with DMA Q800, 2980 only)
20 mm Single/Dual Cantilever Kit
2,580
3,270
3,270
3-point Bending Kit (5, 10, & 15 mm lengths)
3,270
3,270
Parallel Plate Compression Kit (includes 15 & 40 mm plates)
4,770
Film/Fiber Tension Kit
3,270
Penetration Kit
Specialty Fiber Tension Kit
3,270
3,270
Shear Sandwich Kit
3,270
985069.901
3-point Bending Kit (50 mm; low friction)
3,490
985164.901
Powder Clamp Kit (for 35 mm Cantilever Clamp)
1,580
985070.901
984486.901
3-point Bending Kit (20 mm; low friction)
3,640
Film/Fiber Cutting Kit
815
DMA Q800 Submersion Clamps Note: Q800 Only
985178.901
Submersion 3-point Bending Kit (5, 10, & 15 mm lengths)
4,670
985068.901
Submersion Film/Fiber Tension Kit
9,150
985067.901
984003.901
Submersion Compression Kit
DMA Q800/2980 DMA Replacement Parts
Replacement Furnace
259508.000
Brass Tweezers
270962.002
Telescoping Gauge (for 17 mm single cantilever clamps)
270962.001
985199.901
985199.902
5,450
75
Telescoping Gauge (for 10 mm single cantilever clamps)
105
Control Thermocouple (90 mm length)
235
135
Sample Thermocouple (130 mm length)
984370.901
Furnace Inlet Ferrule/Spring Kit
270975.001
Filter Replacement, Auto Drain Regulator
270976.002
7,010
235
45
Filter/Regulator with Auto Drain
1,490
100
21
DMA Q800/2980 DMA Calibration & Test Materials
980228.902
Glass Support Cloth (0.2 mm thick, 33 m length)
982161.903
ABS Sample (3.18 mm thick, 36 mm long, pkg of 5)
982161.902
982165.903
982165.904
984309.901
984313.901
270134.003
ABS Sample (3.18 mm thick, 61 mm long, pkg of 5)
410
60
Polycarbonate Sample (1.6 mm thick, 36 mm long, pkg of 5)
Polycarbonate Sample (0.79 mm thick, 36 mm long, pkg of 5)
Polyethylene Terephthalate (PET) film (38 mm long, pkg of 10)
PET fiber (910 mm long)
DEA 2970 Accessories and Replacement Parts
Flow Meter (for purge gas regulation (0.16-1.7 L/min. air)
60
60
60
60
60
495
901315.901
Parallel Plate Ram Kit (range -150 to 500°C)
4,680
901316.901
Single Surface Ram Kit (range -150 to 500°C)
4,680
901402.901
Sputter Coated (thin film) Accessory Kit (range -150 to 500°C)
1,920
901101.901
Dryer Assembly (for drying purge gas)
1,790
901383.901
Single Surface Sensors (pkg of 10)
1,200
901382.901
901385.901
901388.901
901392.901
901403.901
901507.901
924500.602
926100.901
Note: Accessory Kit contains a parallel plate assembly, 10 bottom parallel plate sensors, 10 top parallel plate sensors,
20 sets of drip pans, 30 spring probes, reference samples and tweezers.
Note: Accessory Kit contains a single surface ram assembly, 10 single surface sensors, 20 sets of drip pans,
60 pointed spring probes, reference samples and tweezers.
Note: Accessory Kit contains 10 bottom parallel plates, 10 top parallel thin film sensors, sputter coated mask, 20 sets of drip pans,
PET reference samples, and tweezers.
Parallel Plate Sensors (pkg of 10)
770
Spring Probe Kit (pkg of 30)
340
Foil Rounds for DEA Drip Pans (pkg of 20)
140
Foil Rounds w/Holes for DEA Drip Pans (pkg of 20)
140
Sputter Coated (thin film) Sensors (pkg of 10 sets)
810
Single Surface Drip Cover (pkg of 30)
790
General Computer Accessories & Software
Ethernet Switch
Thermal Advantage Library Software
926205.802
Upgrade Kit Advantage Software
925003.901
HP Color Inkjet Printer - 115/230 V; 50/60 Hz
160
4,000
Note: Upgrades 29XX modules, using OS/2 and Thermal Solutions software to latest version of Advantage software. Some 29XX
modules may also need a GPIP board upgrade. Contact your TA Representative for information and pricing.
22
1,580
550
© 2008 TA Instruments. All rights reserved.
2008–P&A