Castle House, Sea View Way,
Woodingdean, Brighton,
BN2 6NT, England
Product Specification
Premier Hard Surface Bactericidal Wipes
Tel: +44(0) 0870 2427701
Facimile:+44(0) 1273 391028
Email sales@shermond.com
Website www.shermond.com
SECTION 1 – PRODUCT DESCRIPTION
Product Name:
Product Code:
Premier Hard Surface Bactericidal Wipes
7200
SECTION 2 – PRIMARY USE
Uses:
For use on all working surfaces/objects.
Effective against E Coli, Staphylococcus
aureus, Pseudomonas aeruginosa,
Streptococcus faecalis, Salmonella
typhimurium, Listeria monocytogenes,
Candida albican, Saccharomyces
cerevisiae
SECTION 3 – MATERIAL DESCRIPTION
Material:
Non-woven fabric (70% Viscose 30%
Polypropylene) impregnated with 70% alcohol
SECTION 4 – PHYSICAL PROPERTIES
Weight:
Thickness:
Dimensions (Each Wipe):
Tensile Strength Dry (MD):
Tensile Strength Dry (CD):
Tensile Strength Wet (MD):
Tensile Strength Wet (CD):
Elongation Dry (MD):
Elongation Dry (CD):
Tear Resistance Dry (MD):
Tear Resistance Dry (CD):
Air Permeability:
Absorbency Time:
Absorptive Capacity:
25 gsm
125 microns
200 x 220 mm
787 N/m
427 N/m
340 N/m
190 N/m
6.1%
10.1%
2.2 N
2.9 N
1/20 cm3(20mm H20 DeltaP dry)
4 sec
770%
SECTION 5 – PACKING & LABELLING
Requirements:
160 wipes per tub, 12 tubs per outer carton.
Each tub marked with product name,
Premier logo, product code, and instructions
for use and storage “(↑) This Way Up”.
SECTION 6 – SPECIAL STORAGE INSTRUCTIONS
Storage:
Shelf Life:
Keep in a cool dry place and keep away from
naked flames, heat and direct sunlight. Store
In “No Smoking” area. Container may
explode under high temperature conditions.
12 months if stored as recommended above
Page 1 of 1
Registered Office
110 Park Street, London, W1K 6NX
Registered in England No.62537
Shermond is a trading division of
Bunzl Retail Supplies Ltd
Castle House, Sea View Way,
Woodingdean, Brighton,
BN2 6NT, England
Material Safety Data Hazard Sheet
Premier Hard Surface Bactericidal Wipes
Tel: +44(0) 0870 2427701
Facimile:+44(0) 1273 391028
Email sales@shermond.com
Website www.shermond.com
SECTION 1 – MATERIAL IDENTIFICATION
SECTION 9 – PHYSICAL & CHEMICAL PROPERTIES
Product Name:
Premier Hard Surface Bactericidal Wipes
Product Use:
Surface disinfections
Appearance:
Odour:
Flash Point: oC
Freezing Point oC:
% Volatile (by weight):
pH:
Density (gram/cc):
SECTION 2 – CHEMICAL COMPOSITION
Ethyl Alcohol 70%
Chlorohexidine Digluconate 5.5%
Benzalkonium Chloride 1.5%
Water 23%
CAS No
64-17-5
18472-51-0
68989-00-40
Clear liquid
Alcoholic
15 ± 1
-113 ± 1
41 ± 0.5
Neutral
0.88 ± 0.02
Contact time for the biocide to be effective is 30 seconds
SECTION 3 – HAZARD IDENTIFICATION
SECTION 10 – STABILITY & REACTIVITY
Inhalation:
Eye Contact:
Skin Contact:
Stable in normal use conditions. Do not mix with any other chemical
product
Ingestion:
May cause irritation to respiratory tract
May cause irritation
May cause irritation and may be absorbed by
damaged skin, and particularly children
May burn mouth and digestive tract
SECTION 11 – TOXICOLOGICAL INFORMATION
SECTION 4 – FIRST AID MEASURES
Refer to Hazard Identification and Composition sections.
Route of Entry:
SECTION 12 – ECOLOGICAL INFORMATION
Eye Contact:
Skin Contact:
Ingestion:
Immediately flush with water, continue washing
for at least 15 mins. Remove contact lenses if
worn. Seek medical attention if discomfort
persists.
Wash with soap and water. Seek medical
attention if discomfort persists.
Wash out mouth with water. Seek medical
attention. Show doctor product label.
This product is a disinfectant and as such its contact with living
organisms should be avoided, especially in the aquatic environment.
Do not allow to enter surface waterways as ecological
damage may be caused.
SECTION 13 – DISPOSAL CONSIDERATIONS
SECTION 5 – FIRE & EXPLOSION DATA
Flammability:
Means of Extinction:
Special Procedures:
Flash Point:
Unusual Fire &
Explosion Hazards:
Do not expose to naked flame
Use CO2 or dry chemical for small
fires.
Use water spray to cool fire, exposed
containers and structure. Use water
spray to disperse vapours.
15oC ± 1
Dispose of via a reputable licensed waste contractor, in accordance
with local authority regulations.
SECTION 14 – TRANSPORT INFORMATION
Bulk solution only - UN No 1170. Hazard class 3.2. Flammable
Keep away from source of flame.
SECTION 15 – REGULATORY INFORMATION
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Refer to Exposure/Personal Protection section. Wash small spills
to drain. Large spills should be absorbed by sand/granules and
disposed of carefully.
SECTION 7 – HANDLING & STORAGE
Not Classified.
Keep out of reach of children. Wear suitable gloves.
SECTION 16 – OTHER INFORMATION
Refer to Exposure/Personal Protection section. Avoid prolonged
contact with skin and eyes. Store so as to avoid extremes of
temperature. Do not allow to freeze.
This product is only to be used for the purpose for which it was
intended and in accordance with the specified instructions. This
product should never be mixed with other chemical products and
should be handled with care and stored carefully out of reach of
children.
SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
PREPARED:
Avoid contact with eyes. Wear rubber gloves if prolonged contact
is likely.
EMERGENCY TELEPHONE NUMBER
Tel:
Fax:
Page 2 of 2
27/06/2006
+44 (0) 1622 661991
+44 (0) 1622 688787
Registered Office
110 Park Street, London, W1K 6NX
Registered in England No.62537
Shermond is a trading division of
Bunzl Retail Supplies Ltd
Castle House, Sea View Way,
Woodingdean, Brighton,
BN2 6NT, England
Tel: +44(0) 0870 2427701
Facimile:+44(0) 1273 391028
Email sales@shermond.com
Website www.shermond.com
The information provided within this Material Safety Data Hazard Sheet has been obtained from sources believed to be reliable. Shermond provides no warranties,
does not express or imply and assumes no responsibility for the accuracy of the data contained herein
Page 3 of 3
Registered Office
110 Park Street, London, W1K 6NX
Registered in England No.62537
Shermond is a trading division of
Bunzl Retail Supplies Ltd