机械工程学院
SCI 共 2 篇
1. (张强)Accession Number: WOS:000313100100109
Title: Topological optimization of pick structure based on LS-DYNA
Author(s): Zhang, Q (Zhang, Qiang); Yuan, Z (Yuan, Zhi)
Source: DISASTER ADVANCES, Volume: 5; Issue: 4; Pages: 675-678; Published: OCT 2012
Document Type: Article
Addresses: [Zhang, Qiang] Liaoning Technol Univ, Coll Mech Engn, Fux 123000, Peoples R
China.
[Zhang, Qiang] China Natl Coal Min Equipment Co LTD, Beijing 100011, Peoples R China.
[Zhang, Qiang; Yuan, Zhi] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian
116023, Peoples R China.
Reprint Address: Zhang, Q (reprint author), Liaoning Technol Univ, Coll Mech Engn, Fux 123000,
Peoples R China.
2. (张强)Accession Number: WOS:000313100100296
Title: Mining Machinery System Remote Monitoring-Early Warning and Fault Diagnosis
Author(s): Zhang, Q (Zhang Qiang); Wang, HJ (Wang Haijian)
Source: DISASTER ADVANCES, Volume: 5; Issue: 4; Pages: 1709-1712; Published: OCT 2012
Document Type: Article
Addresses: [Zhang Qiang; Wang Haijian] Liaoning Tech Univ, Fuxing 123000, Peoples R China.
[Zhang Qiang] State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China.
Reprint Address: Zhang, Q (reprint author), Liaoning Tech Univ, Fuxing 123000, Peoples R
China.
EI
共 41 篇
1. (王慧)Electro hydraulic control harmonic aging stress elimination devices - Modeling and
simulation of the shock excitation part
Wang, Hui (Mechanical Engineering College, Liaoning Technical University, Fuxin Liaoning
123000, China); Li, Meng Source: Applied Mechanics and Materials, v 127, p 439-443, 2012,
Numbers, Intelligence, Manufacturing Technology and Machinery Automation, MAMT 2011
Database: Compendex
2. (王慧)Bond graph simulation and test on the working hydraulic system of ZL50 type
loader
Wang, Hui (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000,
China); Yang, Fei Source: Applied Mechanics and Materials, v 127, p 390-394, 2012,
Numbers, Intelligence, Manufacturing Technology and Machinery Automation, MAMT 2011
Database: Compendex
3. (栾丽君)The optimization design of the tunneller drive wheels walk department
Luan, Li Jun (LiJun Luan LiaoNing Technical University, Fu Xin, LiaoNing 123000, China); Li,
Ning; Chang, Sheng; Yu, Shu Hua Source: Advanced Materials Research, v 479-481, p 977-981,
2012, Advanced Mechanical Design
Database: Compendex
4. (王慧)Simulation research on fuzzy adaptive PID control of variable pump control system
Wang, Hui (Liaoning Technical University, Fuxin 123000, China); Xu, Zhuo Source: Applied
Mechanics and Materials, v 220-223, p 880-883, 2012, Advances in Manufacturing
Technology
Database: Compendex
5.( 吕 秀 杰 )The study on quality management integrated plan mode based on
Knowledge-Petri net
Xiujie, Lv (Liaoning Technical University, Liaoning 125105, China) Source: International
Journal of Digital Content Technology and its Applications, v 6, n 12, p 317-324, July 2012
Database: Compendex
6. (张建卓)Study on high frequency hydraulic exciter based on rotary valve control
Zhang, Jianzhuo (Liaoning Technical University, Fuxin, 123000, China); Guan, Lizhe; Li,
Kangkang Source: Advanced Materials Research,
v 490-495, p 1441-1445,
2012,
Mechatronics and Intelligent Materials II
Database: Compendex
7.( 王 慧 )Pressure control characteristics simulation research of electro-hydraulic
proportional variable pump
Hui, Wang (Liaoning Technical University, Fuxin 123000, China); Zhuo, Xu; Fanlong, Meng
Source: Applied Mechanics and Materials, v 232, p 521-526, 2012, Mechanical and
Aerospace Engineering
Database: Compendex
8. (赵丽娟)Research on boom-type roadheader vibration testing based on the LabVIEW
Zhao, Lijuan (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Lv, Xiumei; Tong, Wei Source: Advanced Materials Research, v 418-420, p 1988-1991,
2012, Materials Processing Technology
Database: Compendex
9. (Qin, Zhou)The application of rigid-flex coupled dynamics simulation in coal mining
machine research and development
Qin, Zhou (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Sun, Lin Source: Advanced Materials Research, v 421, p 338-341, 2012, Advanced
Design Technology
Database: Compendex
10. (毛君)Study on the hydrostatic support of internal gear pumps based on FLUENT
Mao, Jun (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000, China);
Liu, Shuang; Zu, Zhenni Source: Applied Mechanics and Materials, v 127, p 516-521, 2012,
Numbers, Intelligence, Manufacturing Technology and Machinery Automation, MAMT 2011
Database: Compendex
11. (杨新乐)The numerical simulation research on garbage particles in airflow field of
horizontal air-separator under different conditions
Yang, Xin-Le (School of Mechanical Engineering, Liaoning Technical University, Fuxin, 123000,
China); Yang, Shuo Source: Advanced Materials Research, v 518-523, p 2263-2266, 2012,
Advances in Environmental Science and Engineering
Database: Compendex
12. (李晓豁)Constant power speed-adjusting of shearer cutting motor by single neuron
self-adaptive PID controlling
Li, Xiao-huo (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Hu, Yan-tao; Chi, Qing-di; Bai, Shuai-wei Source: Applied Mechanics and Materials, v
190-191, p 856-859, 2012, Digital Manufacturing and Automation III
Database: Compendex
13. (王慧)Effect of secondary force on rigidity of oil film of the slipper pair based on
hydrostatic support
Wang, Hui (College of Mechanical Engineering, Liaoning Technical University, Fuxin, Liaoning,
123000, China); Wang, Yuxin Source: Advanced Materials Research, v 468-471, p 1380-1383,
2012, Automation Equipment and Systems
Database: Compendex
14.( 张 强 )Numerical simulation of erosion and particle motion of Multi-medium
oil-coal-water slurry pump
Zhang, Qiang (College of Mechanical Engineering, Liaoning Technical University, Fuxin, 123000,
China); Song, Qiu-Shuang; Mao, Jun Source: Advanced Materials Research, v 346, p 398-404,
2012, Sustainable Construction Materials and Computer Engineering
Database: Compendex
15. (王慧)Dynamic simulation on shock excitation hydraulic system with rotary valve based
on AMEsim
Wanghui (Liaoning Technical University College of Mechanical, Fuxin, China); Dengzongyue
Source: Applied Mechanics and Materials, v 232, p 508-511, 2012, Mechanical and
Aerospace Engineering
Database: Compendex
16. (孙远敬)Parametric design of axial piston pump based on secondary development of
pro/toolkit
Yuanjing, Sun (Mechanical Engineering College, Liaoning Technical University, Fuxin Liaoning
123000, China); Lei, Wang Source: Advanced Materials Research, v 569, p 737-740, 2012,
Advanced Materials Design and Mechanics
Database: Compendex
17. (杨新乐)The numerical simulation for seepage rule of coal-bed methane with hydraulic
cutting seam mining based on Matlab
Yang, Xin-Le (School of Mechanical Engineering, Liaoning Technical University, Fuxin, 123000,
China); Zhang, Yong-Li; Ren, Chang-Zai Source: Advanced Materials Research, v 524-527, p
485-488, 2012, Natural Resources and Sustainable Development II
Database: Compendex
18. (王慧)Electro hydraulic control harmonic aging stress elimination devices-modeling and
simulation of the hydraulic vibrator with the frequency modulation rotary valve
Wang, Hui (Mechanical Engineering College, Liaoning Technical University, Fuxin Liaoning
123000, China); Li, Meng Source: Applied Mechanics and Materials, v 127, p 471-476, 2012,
Numbers, Intelligence, Manufacturing Technology and Machinery Automation, MAMT 2011
Database: Compendex
19. (毛君)EBZ160 star wheel boring machine loading mechanism optimization analysis
Mao, Jun (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000, China);
Chang, Sheng; Xie, Miao Source: Applied Mechanics and Materials, v 127, p 555-559, 2012,
Numbers, Intelligence, Manufacturing Technology and Machinery Automation, MAMT 2011
Database: Compendex
20. (李晓豁)Study of the effects of shearer' kinematic parameters on on-way distribution of
dust on coal face
Li, Xiaohuo (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000,
China); Liu, Shuming; Huang, Zhilong; Du, Wei Source: Applied Mechanics and Materials, v
127, p 400-405, 2012, Numbers, Intelligence, Manufacturing Technology and Machinery
Automation, MAMT 2011
Database: Compendex
21. ( 李 晓 豁 )Study on modal analysis and dynamic performance of electric wheel
self-dumping truck carriage
Li, Xiaohuo (Mechanical Engineering College, Liaoning Technical University, Fuxin Liaoning
123000, China); Cao, Jiangwei; Liu, Shuming; Wang, Chao Source: Applied Mechanics and
Materials, v 127, p 395-399, 2012, Numbers, Intelligence, Manufacturing Technology and
Machinery Automation, MAMT 2011
Database: Compendex
22. (李晓豁)Simulation of disc cutter loads based on ANSYS/LS-DYNA
Li, Xiaohuo (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000,
China); Du, Wei; Huang, Zhilong; Fu, Weili Source: Applied Mechanics and Materials, v 127, p
385-389, 2012, Numbers, Intelligence, Manufacturing Technology and Machinery Automation,
MAMT 2011
Database: Compendex
23. (于英华)Study on reduction noise properties of foamed aluminum laminated structure
acoustical enclosure for ball mill
Yu, Ying-Hua (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000,
China); Yu, Guo-Jun Source: Meitan Xuebao/Journal of the China Coal Society, v 37, n 1, p
158-161, January 2012
Language: Chinese
Database: Compendex
24. (毛君)Research on measuring and controlling of pose and position parameters for
roadheaders
Mao, Jun (Mechanical Engineering College, Liaoning Technical University, Fuxin Liaoning,
China); Qi, Hongliang; Xie, Miao Source: Advanced Materials Research, v 430-432, p
1528-1531, 2012, Frontiers of Advanced Materials and Engineering Technology, FAMET
2012
Database: Compendex
25. (李晓豁)Study on strength and fatigue life of MK type plow bit under different planing
depths
Li, Xiao-Huo (Mechanical Engineering College, Liaoning Technical University, Fuxin 123000,
China); Huang, Zhi-Long; Du, Wei; Liu, Shu-Ming Source: Meitan Xuebao/Journal of the China
Coal Society, v 37, n 1, p 162-166, January 2012
Language: Chinese
Database: Compendex
26. (王慧)External gear pump model and simulation
Wang, Hui (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
Liaoning, China); Du, Shasha Source: Applied Mechanics and Materials, v 127, p 228-232,
2012, Numbers, Intelligence, Manufacturing Technology and Machinery Automation, MAMT
2011
Database: Compendex
27. (郝志勇)Aerodynamic performance contrast test before and after improvement of local
fans for mines
Hao, Zhi-Yong (School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Liu, Wei Source: Meitan Xuebao/Journal of the China Coal Society, v 37, n 5, p 874-877,
May 2012
Language: Chinese
Database: Compendex
28. (戴文智)Optimal multi-period operational planning for steam power system under
low-carbon economy
Dai, Wenzhi (School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Yu, Jingmei; Yang, Xinle Source: Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica
(Petroleum Processing Section), v 28, n 6, p 995-1000, December 2012
Language: Chinese
Database: Compendex
29. (李惟慷)Analysis of instant contact nonlinear on round link chain based on symmetric
penalty function method
Li, Wei-Kang (School of Mechanical Engineering, Liaoning Technical University, Fuxin, Liaoning,
123000, China); Mao, Jun; Yang, Xin-Le., Yang Source: Applied Mechanics and Materials, v
148-149, p 272-275, 2012, Mechanical Engineering, Materials and Energy
Database: Compendex
30. (孟凡英, 第二作者)Numerical analysis on the characteristics of cavitation in the variable
frequency regulation of centrifugal pump
Sun, Guannan (College of Mechanical Engineering, Liaoning Technical University, Zhonghua
Road, Fuxin City, Liaoning Prov, China); Meng, Fanying; Guo, Xianghua; Yang, Shuo Source:
Lecture Notes in Electrical Engineering, v 126 LNEE, n VOL. 3, p 281-286, 2012, Recent
Advances in Computer Science and Information Engineering
Database: Compendex
31. (第二作者)Parameter optimization design of hard rock roadheader cutting head based
on PSO
Li, Xiaohuo (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Liu, Zhisen; Wang, Dan; Li, Yejian Source: Proceedings of the 2012 International
Conference on Computer Application and System Modeling, ICCASM 2012, p 0677-0680, 2012,
Proceedings of the 2012 International Conference on Computer Application and System Modeling,
ICCASM 2012
Database: Compendex
32. (王慧)Simulation and optimization analysis of external spur-gear pump shell
Wang, Hui (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
Liaoning, China); Hou, Jing; Sha, Yongdong Source: Applied Mechanics and Materials, v 232, p
487-491, 2012, Mechanical and Aerospace Engineering
Database: Compendex
33. (王洁)Robustness compensation control of simulation loading system based on secondary
regulation
Jie, Wang (College of Mechanical Engineering, Liaoning Technical University, Fuxin, Liaoning,
123000, China); Hui, Wang; Zhuo, Xu Source: Applied Mechanics and Materials, v 232, p
419-423, 2012, Mechanical and Aerospace Engineering
Database: Compendex
34. (李惟慷)Sorting mechanism and airflow simulation of garbage pneumatic separator
Li, Wei-Kang (School of Mechanical Engineering, Liaoning Technical University, Fuxin, Liaoning,
123000, China); Yang, Shuo; Yang, Xin-Le Source: Applied Mechanics and Materials,
148-149, p 297-300, 2012, Mechanical Engineering, Materials and Energy
Database: Compendex
v
35. (毛君)Analysis on the relation between the mechanics and the aesthetics of machine
structure
Mao, Jun (Dept. of Machine, Mechanical Engineering College, Liaoning Technical University,
Fuxin Liaoning 123000, China); Tang, Lujing Source: Advanced Materials Research, v 510, p
18-22, 2012, Machinery, Materials Science and Engineering Applications
Database: Compendex
36. (赵丽娟)Horizontal swing movement parameters optimization design of longitudinal
road header
Zhao, Li-Juan (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Liu, Xu-Nan; Cao, Tuo Source: Meitan Xuebao/Journal of the China Coal Society, v 37,
n 12, p 2112-2117, November 2012
Language: Chinese
Database: Compendex
37. (赵丽娟)Numerical simulation of coal breaking process of plow bit
Zhao, Li-Juan (School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); He, Jing-Qiang; Li, Fa-Quan Source: Meitan Xuebao/Journal of the China Coal Society,
v 37, n 5, p 878-883, May 2012
Language: Chinese
Database: Compendex
38. (赵丽娟)Plow traction block reliability analysis and fatigue life prediction
Zhao, Li-Juan (College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000,
China); Sun, Zhong-Gang; Li, Guo-Ping Source: Meitan Xuebao/Journal of the China Coal
Society, v 37, n 3, p 516-521, March 2012
Language: Chinese
Database: Compendex
39. (张强)Simulation study of the strength of pick based on LS-DYNA in different hardness
of rock
Zhang, Qiang (Mechanical engineering college of liaoning Technical University, Fuxin, 123000,
China); Li, Shou-ju Source: Advanced Materials Research, v 567, p 232-235, 2012,
Metallurgy Technology and Materials
Database: Compendex
40. (郑莹) Research on the dust deposition and corrosion problems in heating surface at the
rear of oil-fired boiler
Zheng, Ying (SEPA Key Laboratory on Eco-Industry, Northeastern University, Shenyang 110819,
China); Cai, Jiuju; Ma, Zhanhe Source: Advanced Materials Research, v 516-517, p 404-407,
2012, Electrical Power and Energy Systems
Database: Compendex
41. ( 郑莹)Study on the refomation of Francis turbine based on CFD
Zheng, Ying (SEPA Key Laboratory on Eco-Industry, Northeastern University, Shenyang 110819,
China); Cai, Jiuju; Ma, Zhanhe Source: Advanced Materials Research, v 516-517, p 669-672,
2012, Electrical Power and Energy Systems
Database: Compendex
ISTP
共 20 篇
1. (杨新乐)Accession Number: WOS:000313845901049
Title: The numerical simulation research on garbage particles in airflow field of horizontal
air-separator under different conditions
Author(s): Yang, XL (Yang Xin-le); Yang, S (Yang Shuo)
Source: ADVANCES IN ENVIRONMENTAL SCIENCE AND ENGINEERING, PTS 1-6 Book
Series: Advanced Materials Research, Volume: 518-523; Pages: 2263-2266; Published: 2012
Document Type: Proceedings Paper
Addresses: [Yang Xin-le; Yang Shuo] Liaoning Tech Univ, Sch Mech Engn, Fuxing 123000,
Peoples R China.
Reprint Address: Yang, XL (reprint author), Liaoning Tech Univ, Sch Mech Engn, Fuxing 123000,
Peoples R China.
2. (杨新乐)Accession Number: WOS:000313544100088
Title: The numerical simulation for seepage rule of coal-bed methane with hydraulic cutting seam
mining based on Matlab
Author(s): Yang, XL (Yang Xin-le); Zhang, YL (Zhang Yong-li); Ren, CZ (Ren Chang-zai)
Source: NATURAL RESOURCES AND SUSTAINABLE DEVELOPMENT II, PTS 1-4 Book
Series: Advanced Materials Research, Volume: 524-527; Pages: 485-488; Published: 2012
Document Type: Proceedings Paper
Addresses: [Yang Xin-le; Ren Chang-zai] Liaoning Tech Univ, Sch Mech Engn, Fuxing 123000,
Peoples R China.
Reprint Address: Yang, XL (reprint author), Liaoning Tech Univ, Sch Mech Engn, Fuxing 123000,
Peoples R China.
3. (张建卓)Accession Number: WOS:000312926100292
Title: Study on High Frequency Hydraulic Exciter Based on Rotary Valve Control
Author(s): Zhang, JZ (Zhang, Jianzhuo); Guan, LZ (Guan, Lizhe); Li, KK (Li, Kangkang)
Source: MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6 Book Series:
Advanced Materials Research, Volume: 490-495; Pages: 1441-1445; Published: 2012
Document Type: Proceedings Paper
Addresses: [Zhang, Jianzhuo; Guan, Lizhe; Li, Kangkang] Liaoning Tech Univ, Fuxing 123000,
Peoples R China.
Reprint Address: Zhang, JZ (reprint author), Liaoning Tech Univ, Fuxing 123000, Peoples R
China.
4. (王慧)Accession Number: WOS:000309902800283
Title: Effect of Secondary Force on Rigidity of Oil Film of the Slipper Pair Based on Hydrostatic
Support
Author(s): Wang, H (Wang, Hui); Wang, YX (Wang, Yuxin)
Source: AUTOMATION EQUIPMENT AND SYSTEMS, PTS 1-4 Book Series: Advanced
Materials Research, Volume: 468-471; Pages: 1380-1383; Published: 2012
Document Type: Proceedings Paper
Addresses: [Wang, Hui; Wang, Yuxin] Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Liaoning, Peoples R China.
Reprint Address: Wang, H (reprint author), Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Liaoning, Peoples R China.
5. (毛君)Accession Number: WOS:000312435000005
Title: Analysis on the Relation between the Mechanics and the Aesthetics of Machine Structure
Author(s): Mao, J (Mao Jun); Tang, LJ (Tang Lujing)
Source: MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS Book
Series: Advanced Materials Research, Volume: 510; Pages: 18-22; Published: 2012
Document Type: Proceedings Paper
Addresses: [Mao Jun] Liaoning Tech Univ, Mech Engn Coll, Dept Machine, Fuxin Liaoning
123000, Peoples R China.
Reprint Address: Mao, J (reprint author), Liaoning Tech Univ, Mech Engn Coll, Dept Machine,
Fuxin Liaoning 123000, Peoples R China.
6. (栾丽君)Accession Number: WOS:000311979400200
Title: The optimization design of the tunneller drive wheels walk department
Author(s): Luan, LJ (Luan, LiJun); Li, N (Li, Ning); Chang, S (Chang, Sheng); Yu, SH (Yu,
ShuHua)
Source: ADVANCED MECHANICAL DESIGN, PTS 1-3 Book Series: Advanced Materials
Research, Volume: 479-481; Pages: 977-981; Published: 2012
Document Type: Proceedings Paper
Addresses: [Luan, LiJun] LiJun Luan LiaoNing Tech Univ Fu Xin, Liaoning 123000, Peoples R
China.
Reprint Address: Luan, LJ (reprint author), LiJun Luan LiaoNing Tech Univ Fu Xin, Liaoning
123000, Peoples R China.
7. (李晓豁)Accession Number: WOS:000311978100178
Title: Constant Power Speed-adjusting of Shearer Cutting Motor by Single Neuron Self-adaptive
PID Controlling
Author(s): Li, XH (Li Xiao-huo); Hu, YT (Hu Yan-tao); Chi, QD (Chi Qing-di); Bai, SW (Bai
Shuai-wei)
Source: DIGITAL MANUFACTURING & AUTOMATION III, PTS 1 AND 2 Book Series:
Applied Mechanics and Materials, Volume: 190-191; Pages: 856-859; Published: 2012
Document Type: Proceedings Paper
Addresses: [Li Xiao-huo; Hu Yan-tao; Chi Qing-di; Bai Shuai-wei] Liaoning Tech Univ, Coll
Mech Engn, Fuxing 123000, Peoples R China.
Reprint Address: Li, XH (reprint author), Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Peoples R China.
8. (谢苗)Accession Number: WOS:000310495401026
Title: Research on Measuring and Controlling of Pose and Position Parameters for Roadheaders
Author(s): Mai, J (Mai, Jun); Qi, HL (Qi, Hongliang); Xie, M (Xie, Miao)
Source: FRONTIERS OF ADVANCED MATERIALS AND ENGINEERING TECHNOLOGY,
PTS 1-3 Book Series: Advanced Materials Research, Volume: 430-432; Pages: 1528-1531;
Published: 2012
Document Type: Proceedings Paper
Addresses: [Mai, Jun; Qi, Hongliang; Xie, Miao] Liaoning Tech Univ, Mech Engn Coll, Fuxin
Liaoning, Peoples R China.
Reprint Address: Mai, J (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxin Liaoning,
Peoples R China.
9. (张强)Accession Number: WOS:000309496200064
Title: Numerical Simulation of Erosion and Particle Motion of Multi-Medium Oil -Coal-Water
Slurry Pump
Author(s): Zhang, Q (Zhang, Qiang); Song, QS (Song, Qiu-shuang); Mao, J (Mao, Jun)
Source: SUSTAINABLE CONSTRUCTION MATERIALS AND COMPUTER ENGINEERING
Book Series: Advanced Materials Research, Volume: 346; Pages: 398-404; Published: 2012
Document Type: Proceedings Paper
Addresses: [Zhang, Qiang] Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000, Peoples R
China.
Reprint Address: Zhang, Q (reprint author), Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Peoples R China.
10. (王慧)Accession Number: WOS:000306934500041
Title: External Gear Pump Model and Simulation
Author(s): Wang, H (Wang, Hui); Du, SS (Du, Shasha)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 228-232; Published: 2012
Document Type: Proceedings Paper
Addresses: [Wang, Hui; Du, Shasha] Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Liaoning, Peoples R China.
Reprint Address: Wang, H (reprint author), Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Liaoning, Peoples R China.
11. (李晓豁)Accession Number: WOS:000306934500071
Title: Simulation of Disc Cutter Loads Based on ANSYS/LS-DYNA
Author(s): Li, XH (Li, Xiaohuo); Du, W (Du, Wei); Huang, ZL (Huang, Zhilong); Fu, WL (Fu,
Weili)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 385-389; Published: 2012
Document Type: Proceedings Paper
Addresses: [Li, Xiaohuo; Du, Wei; Huang, Zhilong; Fu, Weili] Liaoning Tech Univ, Mech Engn
Coll, Fuxing 123000, Peoples R China.
Reprint Address: Li, XH (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Peoples R China.
12. (王慧)Accession Number: WOS:000306934500072
Title: Bond Graph Simulation and Test on the Working Hydraulic System of ZL50 Type Loader
Author(s): Hui-Wang (Hui-Wang); Fei-Yang (Fei-Yang)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 390-394; Published: 2012
Document Type: Proceedings Paper
Addresses: [Hui-Wang; Fei-Yang] Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000, Peoples
R China.
Reprint Address: Hui-Wang (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxing
123000, Peoples R China.
13. (李晓豁)Accession Number: WOS:000306934500073
Title: Study on Modal Analysis and Dynamic Performance of Electric Wheel Self-dumping Truck
Carriage
Author(s): Li, XH (Li, Xiaohuo); Cao, JW (Cao, Jiangwei); Liu, SM (Liu, Shuming); Wang, C
(Wang, Chao)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 395-399; Published: 2012
Document Type: Proceedings Paper
Addresses: [Li, Xiaohuo; Cao, Jiangwei; Liu, Shuming; Wang, Chao] Liaoning Tech Univ, Mech
Engn Coll, Fuxin Liaoning 123000, Peoples R China.
Reprint Address: Li, XH (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxin Liaoning
123000, Peoples R China.
14. (李晓豁)Accession Number: WOS:000306934500074
Title: Study of the Effects of Shearer' Kinematic Parameters on On-way Distribution of Dust on
Coal Face
Author(s): Li, XH (Li, Xiaohuo); Liu, SM (Liu, Shuming); Huang, ZL (Huang, Zhilong); Du, W
(Du, Wei)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 400-405; Published: 2012
Document Type: Proceedings Paper
Addresses: [Li, Xiaohuo; Liu, Shuming; Huang, Zhilong; Du, Wei] Liaoning Tech Univ, Mech
Engn Coll, Fuxing 123000, Peoples R China.
Reprint Address: Li, XH (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Peoples R China.
15. (王慧)Accession Number: WOS:000306934500081
Title: Electro Hydraulic Control Harmonic Aging Stress Elimination Devices-modeling and
simulation of the shock excitation part
Author(s): Wang, H (Wang, Hui); Li, M (Li, Meng)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 439-443; Published: 2012
Document Type: Proceedings Paper
Addresses: [Wang, Hui; Li, Meng] Liaoning Tech Univ, Mech Engn Coll, Fuxin Liaoning 123000,
Peoples R China.
Reprint Address: Wang, H (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxin Liaoning
123000, Peoples R China.
16. (王慧)Accession Number: WOS:000306934500087
Title: Electro Hydraulic Control Harmonic Aging Stress Elimination Devices-modeling and
simulation of the hydraulic vibrator with the frequency modulation rotary valve
Author(s): Wang, H (Wang, Hui); Li, M (Li, Meng)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 471-476; Published: 2012
Document Type: Proceedings Paper
Addresses: [Wang, Hui; Li, Meng] Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Liaoning, Peoples R China.
Reprint Address: Wang, H (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Liaoning, Peoples R China.
17. (毛君)Accession Number: WOS:000306934500095
Title: Study on the Hydrostatic Support of Internal Gear Pumps Based on FLUENT
Author(s): Mao, J (Mao, Jun); Liu, S (Liu, Shuang); Zu, ZN (Zu, Zhenni)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 516-521; Published: 2012
Document Type: Proceedings Paper
Addresses: [Mao, Jun; Liu, Shuang] Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Peoples R China.
Reprint Address: Mao, J (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Peoples R China.
18. (毛君)Accession Number: WOS:000306934500102
Title: EBZ160 Star Wheel Boring Machine Loading Mechanism Optimization Analysis
Author(s): Jun-Mao (Jun-Mao); Sheng-Chang (Sheng-Chang); Miao-Xie (Miao-Xie)
Source: NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND
MACHINERY AUTOMATION Book Series: Applied Mechanics and Materials, Volume: 127;
Pages: 555-559; Published: 2012
Document Type: Proceedings Paper
Addresses: [Jun-Mao; Sheng-Chang; Miao-Xie] Liaoning Tech Univ, Mech Engn Coll, Fuxing
123000, Peoples R China.
Reprint Address: Jun-Mao (reprint author), Liaoning Tech Univ, Mech Engn Coll, Fuxing 123000,
Peoples R China.
19. (郭仁宁)Accession Number: WOS:000306459600011
Title: The Numerical Simulation of Enhanced Heat Transfer Tubes
Author(s): Li, XY (Li Xiaoyan); Guo, RN (Guo Renning); Li, CY (Li Chunyang)
Source: INTERNATIONAL CONFERENCE ON APPLIED PHYSICS AND INDUSTRIAL
ENGINEERING 2012, PT A Book Series: Physics Procedia, Volume: 24; Pages: 70-79;
Published: 2012
Document Type: Proceedings Paper
Addresses: [Li Xiaoyan; Guo Renning; Li Chunyang] Liaoning Tech Univ, Coll Mech Engn,
Fuxing, Peoples R China.
Reprint Address: Li, XY (reprint author), Liaoning Tech Univ, Coll Mech Engn, Fuxing, Peoples
R China.
20. (赵丽娟)Accession Number: WOS:000302668301091
Title: Research on Boom-type roadheader vibration testing based on the LabVIEW
Author(s): Zhao, LJ (Zhao, Lijuan); Lv, XM (Lv, Xiumei); Tong, W (Tong, Wei)
Source: MATERIALS PROCESSING TECHNOLOGY, PTS 1-3 Book Series: Advanced
Materials Research, Volume: 418-420; Pages: 1988-1991; Published: 2012
Document Type: Proceedings Paper
Addresses: [Zhao, Lijuan; Lv, Xiumei; Tong, Wei] Liaoning Tech Univ, Coll Mech Engn, Fuxing
123000, Peoples R China.
Reprint Address: Zhao, LJ (reprint author), Liaoning Tech Univ, Coll Mech Engn, Fuxing 123000,
Peoples R China.