CACHE Modules on Energy in the Curriculum
Fuel Cells
Module Title: Application of Heat of Reaction: Hydrogen vs. Gasoline
Module Author: Jason Keith
Author Affiliation: Michigan Technological University
Course: Material and Energy Balances (First chemical engineering course)
Text Reference: Felder and Rousseau, section 4.6
Concepts: Gas law, heat of combustion
Problem Motivation: Fuel cells are a promising alternative energy technology. One type
of fuel cell, a proton exchange membrane fuel cell reacts hydrogen and oxygen together
to produce electricity. Fundamental to the design of fuel cells is an understanding of heat
of reaction of different fuels. In this problem we will use the heat of reaction to determine
the energy contained in a hydrogen cylinder, and determine the equivalent number of
gallons of gasoline.
Consider the schematic of a compressed hydrogen tank feeding a proton exchange
membrane fuel cell, as seen in the figure below. The electricity generated by the fuel cell
is used here to power a laptop computer. We are interested in determining the maximum
amount of time the laptop can be operated from the compressed hydrogen tank.
Computer
(Electric Load)
H2 feed line
Air in
Anode
Gas
Chamber
Cathode
Gas
Chamber
Air / H2O out
H2 out
H2 tank
1st draft
Revision
Fuel Cell
J.M. Keith
J. M. Keith
Page 1
June 5, 2007
July 25, 2007
Problem Information
Example Problem Statement: Before carrying out the fuel cell calculation to learn the
operating time for the laptop, we will review the energy balance to calculate heats of
reaction; in this example calculation we will determine the heat of reaction of gasoline.
We will assume that liquid gasoline is 13% n-heptane (C7H16) and 87% 2,2,4 trimethyl
pentane (isooctane, C8H18), and that it is combusted to make liquid water product.
Determine the volume in gallons of 1 mol of gasoline and the energy generated for the
combustion of a gallon of gasoline. The home problem will compare this energy with that
produced by the combustion of a compressed cylinder of hydrogen gas.
Additional Information:
Hf H2O = -285.84 kJ/mol (liquid water)
Hf H2O = -241.83 kJ/mol (vapor water)
Hf C7H16 = -224.4 kJ/mol
Hf C8H18 = -259.3 kJ/mol
Hf CO2 = -393.5 kJ/mol.
Specific gravity of n-heptane = 0.684
Specific gravity of isooctane = 0.692.
Example Problem Solution:
We will assume that gasoline is composed of 87 mol% isooctane and 13% n-heptane.
Then we can calculate the heat of reaction for the individual hydrocarbons and compute a
weighted average for the gasoline.
Step 1) We first need the heat of reaction for the individual hydrocarbons. The
stoichiometry for the combustion of one mole of n-heptane is given as:
C7H16 + 11 O2 → 7 CO2 + 8 H2O
The heat of reaction is given as
Hr =  Hf,products –  Hf,reactants
Hr,C7H16 = 7 HCO2 + 8 HH2O - HC7H16 – 11 HO2
H r,C7H16 = 7 (-393.5 kJ/mol) + 8 (-285.54 kJ/mol) – (-224.4 kJ/mol) – 11(0 kJ/mol)
H r,C7H16 = -4816 kJ/mol
Step 2) The stoichiometry for the combustion of one mole of isooctane is given as:
C8H18 + 25/2 O2 → 8 CO2 + 9 H2O
1st draft
Revision
J.M. Keith
J. M. Keith
Page 2
June 5, 2007
July 25, 2007
The heat of reaction is given as
Hr =  Hf,products –  Hf,reactants
Hr,C8H18 = 8 HCO2 + 9 HH2O - HC8H18 – 25/2 HO2
Hr,C8H18 = 8 (-393.5 kJ/mol) + 9 (-285.54 kJ/mol) – (-259.3 kJ/mol) – 25/2(0 kJ/mol)
Hr,C8H18 = -5461 kJ/mol
Step 3) The weighted average heat of reaction is given as:
Hr,gasoline = 0.87 Hr,C8H18 + 0.13 Hr,C7H16
Hr,gasoline = 0.87 (-5461 kJ/mol) + 0.13 (-4816 kJ/mol)
Hr,gasoline = -5370 kJ/mol
Step 4) We now need to determine the volume in gallons of 1 mol of gasoline.
First we divide up the 1 mol of gasoline into separate parts, n-heptane and isooctane.
nn-heptane = 0.13 ngasoline = 0.13 (1 mol) = 0.13 mol
and nisooctane = 0.87 ngasoline = 0.87 (1 mol) = 0.87 mol
The mass of each fuel can be determined from the molecular weights, which for nheptane is 100 g/mol and for isooctane is 114 g/mol.
Thus the mass of each fuel is
mn-heptane = 100 g/mol (0.13 mol) = 13.0 g
misooctane = 114 g/mol (0.87 mol) = 99.2 g
Step 5) The volume of each fuel can be determined from the specific gravity. Thus,
Vn-heptane = 13.0 g / (0.684 g/cm3) = 19.0 cm3
Vn-heptane = 99.2 g / (0.692 g/cm3) = 143.4 cm3
The total volume of fuel is 162.4 cm3. Using the unit conversion factors for one cubic
foot from the inside cover of Felder and Rousseau, and converting to gallons we have
162.4 cm3 (7.4805 gal / 28317 cm3) = 0.043 gal
Step 6) Finally, we can obtain the energy per gallon is:
1st draft
J.M. Keith
Revision
J. M. Keith
Page 3
June 5, 2007
July 25, 2007
  5370 kJ  1 mol 
  125,000 kJ/gal
Q

 mol  0.043 gal 
We will compare this value with the energy generated in the combustion of a compressed
tank of hydrogen gas.
1st draft
Revision
J.M. Keith
J. M. Keith
Page 4
June 5, 2007
July 25, 2007