STAIR PARTS BUYER’S GUIDE
®
STAIRS
Crafting Quality Stair Parts for Over 125 Years.
A Company of VISADOR Holding Corporation.
Table of Contents
SECTION
PAGE NUMBER
Anatomy of a Stair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stair Building Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Profile Index — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tru-Line Balustrade System . . . . . . . . . . . . . . . . . . . . . . . . . . .
Traditional — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Classic — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bristol — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Marion — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chippendale — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Victorian — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Art Deco — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Liberty — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Craftsman — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hampton — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Richmond — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Virginian — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall Rails — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fittings — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Steps — Hardwood . . . . . . . . . . . . . . . . . . . . . . . . . . .
Treads, Risers and Accessories — Hardwood . . . .
Box Newel Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forged Balustrade Collection . . . . . . . . . . . . . . . . . . . . . . . . .
Wonderail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tread Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rosettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Newel Drops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Profile Index — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Traditional — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Georgian — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stafford — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fittings — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Kent — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Southampton — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Steps — Hemlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Treads, Risers and Accessories — Hemlock . . . . .
Spindles and Tops — Hemlock . . . . . . . . . . . . . . . . . . . . . . .
Ordering Specs — Newels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Specs — Balusters . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Specs — Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Specs — Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repetitive Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
3
4, 5
6, 7
8, 9
10, 11
12, 13
14, 15
14, 15
16, 17
16, 17
18, 19
20, 21
22
23
23
23
24, 25
26
27
28, 29
30–33
34, 35
36
36
36
36
37
37
38
39
39
40
41
42
42
43
44, 45
46
47
48, 49
50
51
“Wood products have been
our business since 1874.”
Today, our three manufacturing locations,
located in the heart of hardwood sources,
total over one half million square feet under
roof. We are vertically integrated from
rough sawn, green lumber through finish
sanded and packed products.
We continually examine all new
technology, machinery and techniques of
our industry, and have implemented
elements to enhance our business and keep
us on the leading edge of the industry.
Marion Plant 1
Marion Plant 2
Marion Plant 3
COFFMAN STAIR PARTS • SINCE 1874
STAIR ANATOMY
C-7098 Gooseneck 1-Riser No Cap
C-4046 Landing Newel
C-7021 Quarterturn Cap
C-7086 Gooseneck Right Hand
2-Riser With Cap
C-7337 Rosette
C-4015 Landing Newel
C-7020 Tandem Cap
C-5070 Baluster
C-6045 Shoe Rail
C-6050 Fillet
C-8070 Coped Tread
C-7099 Gooseneck 2-Riser No Cap
C-6010 Handrail
C-7010 Starting Easing
C-4011 Newel
C-7065 Gooseneck
Right Hand 2-Riser With Cap
C-7089 Gooseneck 2-Riser With Cap
C-7098 Gooseneck
1-Riser No Cap
C-4015 Landing Newel
C-4042 Newel
C-5015-39" (Second Baluster On Tread)
C-4040
Starting
Newel
C-5015-36" (First Baluster On Tread)
C-7045 Right Hand Turnout
C-4064 Starting Newel
C-8029 Tread Bracket
C-8590 Landing Tread
C-4015 Landing Newel
C-8015 Starting Step
C-8028 Tread Bracket
C-7030 Left Hand Volute
C-4063 Starting Newel
C-8971 Tread Cap
C-8976 Riser Cap
STAIR BUILDING GUIDE
EXCELLENT TRAINING AND REFERENCE GUIDE FOR
EVERYONE INVOLVED WITH THE PURCHASING, SALES
AND INSTALLATION OF STAIR PARTS.
CONVENIENT SIZE:
7-1/4" X 9"
REFERENCE
CHARTS
This instruction
manual is the first
comprehensive
visual book on stair
building. The 14
chapters contain
over 475 black
and white
photographs
with detailed
instructions,
illustrations
and reference
tables.
Each indexed chapter of
this Guide visually deals with one
segment of the installation process. Dozens of
photographs cover each section in depth, allowing you to see
actual job site conditions at each stage of the installation process.
The order of the chapters will allow the beginning carpenter to
see the installation process from start to finish, with references to
similar concepts listed where necessary for a more complete
understanding. And for the more experienced stair installer looking for
specific information, the one-subject chapters, index, and reference
materials will provide information for a lifetime of stair building.
COFFMAN STAIR PARTS • SINCE 1874
STEP-BY-STEP
PHOTOS
IN-DEPTH
DETAILS
ONE-SUBJECT
CHAPTERS
CLEARLY
WRITTEN
Contents by chapter:
Chapter 1 STAIR BASICS
Chapter 2 PART INFORMATION
Chapter 3 ROUGH STAIR
Chapter 4 STAIR BODY
Chapter 5 BALUSTRADE LAYOUT
Chapter 6 NEWELS
Chapter 7 RAIL AND FITTINGS
Chapter 8 BALUSTERS
Chapter 9 CURVED RAIL
Chapter 10 WONDERAIL
Chapter 11 FORGED
Chapter 12 HARDWARE
Chapter 13 REFERENCE
Chapter 14 GLOSSARY / INDEX
3
HARDWOOD PROFILE INDEX
Coffman’s profile index presents examples of newels, balusters and
handrails for all of the Coffman families. A choice of a profile that
matches your architectural style will lead you to a specific Coffman
family.
You may also go outside the family lines and combine products to
create your own style. What ever you choose, it will be one of
America’s most beautiful stairways...built with Coffman Stair Parts,
the industry leader since 1874.
NEWELS
OVER-THE-POST
C-4010
Page 8
C-4019
Page 8
C-4030
Page 8
C-4510
Page 18
C-4511
Page 18
C-4530 C-4531 C-4563 C-4130 C-4130-F C-4130-R C-4210 C-4270 C-4271
Page 18 Page 18 Page 18 Page 12 Page 12 Page 12 Page 10 Page 14 Page 16
C-4272
Page 14
C-4810
Page 16
NEWELS
P
OST-TO-POST
(continued below)
C-4040
Page 9
C-4040-BT C-4040-S
Page 9
Page 9
C-4070 C-4540-BT C-4544-BT C-4550-BT C-4560-BT C-4150
Page 22 Page 19 Page 19
Page 19
Page 19 Page 13
C-4150-F
Page 13
C-4150-R
Page 13
C-4001
Pages
11, 22
C-4004
Pages
11, 22
C-4004-BT
Pages
11, 22
6
(continued from above)
NEWELS
POST-TO-POST
C-4007
Page 11
C-4240
Page 11
C-4280
Page 15
C-4281
Page 17
C-4282
Page 15
C-4840
Page 17
C-4074
Page 20
C-4076
Page 20
C-4075
Page 29
C-4077
Page 29
C-4095
Page 29
C-4096
Page 29
C-4097
Page 28
Additional Box Newels can be viewed on pages 28 and 29.
4
COFFMAN STAIR PARTS • SINCE 1874
HARDWOOD PROFILE INDEX
1
BALUSTERS
PIN TOP
2
C-5015
Pages
8, 9,18
C-5025
Page 8
C-5035
Page 8
C-5040
Page 8
C-5050
Page 9
C-5060
Page 21
C-5067
Pages
9, 19
C-5070
Page 9
C-5610
C-5661
Pages
Pages
8, 10,11,18 18, 19
C-5845
Pages
16, 17
C-5151
Page s
12, 13
C-5151-F C-5151-R
Pages
Pages
12, 13
12, 13
C-5141
Page 13
C-5141-F C-5141-R C-5201
Page 13 Page 13 Page 15
C-5211
Pages
14, 15
C-5231
Page
16, 17
C-5251
Pages
14, 15
C-5611
Pages
10, 11
C-5221
Page 17
C-5241
Page 15
C-5360
Page 21
C-5601
Pages
11, 22
BALUSTERS
SQUARE TOP
C-5105
Pages
9, 19
C-5005
Pages
9, 19, 22
RAILS
2
C-6300
C-6301
C-6302
C-6700 P
C-6700 P1
C-6770 P
C-6000 P
C-6005 P1
1-5/8w X 5-1/2h
1-5/8w X 5-1/2h
1-5/8w X 2-3/4h
2-3/4w X 1-5/8h
2-3/4w X 1-5/8h
2-1/4w X 1-3/4h
1-3/4w X 2-3/32h
2-17/32w X 2-5/16h
Page 20
Page 20
Page 20
Page 20
Page 20
Page 20
Page 20
Page 22
2
RAILS
2
23
2
2
3
27
C-6510
C-6010
C-6210-W
C-6410
C-6610
C-6810
C-6110
C-6719
2-1/4w X 2-3/8h
2-1/4w X 2-3/8h
2-5/8w X 2-3/8h
2-5/8w X 2-3/8h
2-5/8w X 2h
2-3/8w X 2-7/8h
2-3/4w X 2-3/4h
2-5/8w X 3h
Pages 18, 19
Pages 8, 9
Pages 10, 11, 16, 17
Page 23
Page 23
Page 16, 17
Pages 12, 13
Pages 14, 15
COFFMAN STAIR PARTS • SINCE 1874
5
TRU-LINE BALUSTRADE SYSTEM
™
NEW! Revolutionary Adjustable Baluster Tops. A movable two-part system.
PERFECT
ALIGNMENT
On EVERY stair design.
+ =
COST EFFECTIVE
No plowed rail and fillet
to purchase or install.
INCREASED
STRENGTH
TRU-LINE provides pin
top baluster strength with
the desired look of a
square top system.
PERFECTION
TRU-LINE, an exclusive,
Adjustable Balustrade System
created by Coffman Stairs.
This is the only stair system
available that allows perfect
alignment of the upper baluster
blocks with the historically
correct look of even lower
baluster squares. They are perfect
at any stair angle. Perfect at any
rake rail height. Perfect for any
number of balusters per tread.
TRU-LINE, perfect every time.
EASY ORDERING
One baluster length
replaces the 34” through
41” lengths. Simply count
the number of balusters
needed.
EASY INSTALLATION
Trim the movable top to
the correct angle and
secure in place.
PERFECT FOR
CURVED STAIRS
No plowing of rail or
curved fillet. Perfect on
inside and outside curves.
Perfect on multiple
balusters per tread. Equal,
balanced appearance on
double-sided curves and
from rake to balcony.
Easy installation.
Trim the top to
the correct angle
and secure into
place under
the rail.
Patent Pending
™
6
COFFMAN STAIR PARTS • SINCE 1874
TOP BLOCKS
TRU-LINE BALUSTRADE SYSTEM
™
Your balusters will line up perfectly at the top...every time.
+
+
C-5576
13 7/16"
C-5575
+
13 3/8"
41"
Top Block
Installation
Instructions
+
13 3/8"
C-5575
C-5575
13 3/8"
41"
41"
41"
13 3/8"
15"
15"
15"
5 11/16"
4 1/8"
4 1/8"
4 1/8"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5511
1 3/4" Sq.
C-5551
1 3/4" Sq.
C-5531
1 3/4" Sq.
C-5541
1 3/4" Sq.
1-3/4” Square Base - 7/8” Diameter Top
+
+
12 15/16"
C-5571
C-5570
Cut stair angle on
single block.
2
Hold under rail and
check plumb.
+
12 15/16"
C-5570
12 1/8"
41"
10 7/8"
41"
41"
16 5/8"
13 5/8"
1
9 1/2"
5 11/16"
2 11/16"
8 3/4"
8 3/4"
3
Cut all tops, slide onto
pretrimmed balusters.
Install with standard
baluster techniques.
8 1/2"
1 1/4"
1 1/4"
1 1/4"
C-5510
1 1/4" Sq.
C-5515
1 1/4" Sq.
C-5567
1 1/4" Sq.
4
1-1/4” Square Base - 11/16” Diameter Top
Raise top, glue and nail
permanently into place.
TRU-LINE Adjustable Top Detail
7 3/8"
1 3/4"
C-5576
7 3/8"
1 3/4"
C-5575
COFFMAN STAIR PARTS • SINCE 1874
6 7/8"
1 1/4"
C-5571
6 7/8"
1 1/4"
C-5570
™
7
TRADITIONAL OVER-THE-POST
2 1/4"
2 3/8"
20 1/2"
31"
1 1/2"
C-6010
1/2"
C-6010
1/2"
C-6016 (7 piece)
Bending Rail
10 1/2"
8"
10 1/2"
8"
43"
41"
10 1/2"
8"
32 1/2"
30 1/2"
39"
36"
34"
10 1/2"
8"
1/4"
28 1/2"
25 1/2"
23 1/2"
10 1/2"
8"
8"
10 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
33 3/4"
36 3/4"
38 3/4"
2 3/8"
31 3/4"
28 3/4"
1/4"
34"
31"
39"
36"
41"
C-6015
Bending Mould
2 1/4"
2 1/4"
C-6016 (9 piece)
Bending Rail
2 1/4"
2 1/4"
2 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5025
1 1/4" Sq.
C-5025
1 1/4" Sq.
C-5025
1 1/4" Sq.
C-5025
1 1/4" Sq.
C-5025
1 1/4" Sq.
6"
6"
6"
6"
6"
25"
30"
28"
31"
33"
36"
34"
35"
39"
31"
6"
6"
6"
6"
6"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/8"
C-5035 C-5035 C-5035
C-5035
C-5035
1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
36"
34"
1 1/8"
1 1/8"
39"
1 1/8"
31"
12 15/16"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
5 11/16"
5 11/16"
13 1/2"
11 1/2"
1 1/4"
1 1/4"
41"
39"
36"
5 11/16"
1 1/4"
1 1/8"
12 15/16"
12 15/16"
10 15/16"
34"
7 15/16"
41"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
41"
2 7/8"
1 1/4"
1 1/4"
C-5610
C-5610
C-5610
C-5610
C-5610
C-5040
C-5040 C-5040
C-5040
C-5040
1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
1"
1"
1"
1"
28 7/16"
ADJUSTABLE
NEWEL
30"
Enlarged for detail.
31 1/2"
30"
44"
49"
40"
5 9/16"
41 1/2"
9"
9"
9"
1"
1"
9"
9"
2 1/4"
2 3/4"
2 3/4"
C-4050
2 1/4" Dia.
C-4060
2 3/4" Dia.
Adjustable
C-4061
2 3/4" Dia.
Adjustable
Check local
building codes.
SEE PAGE 45
C-4063
2 3/4" Dia.
use with
Volute
1"
1"
1"
Newel
top
diameter
is 1".
27"
82 1/2"
1"
1"
1"
27"
2 3/4"
27"
1"
1"
27"
1"
27"
6 7/8"
1"
1"
30"
30"
30"
50 1/2"
60"
27"
27"
41"
45 1/2"
44"
13"
2 3/4"
C-4064
2 3/4" Dia.
use with
Turnout
8
2 3/4"
14 1/2"
2 3/4"
C-4066
C-4065
2 3/4" Dia. 2 3/4" Dia.
Adjustable Adjustable
3"
3"
C-4035
3" Sq.
C-4038
3" Sq.
24"
48"
32"
54 1/2"
40 1/2"
17 1/8"
16"
13"
16"
3"
3"
3"
3"
3"
3"
C-4012
C-4014
3" Sq.
3" Sq.
Adjustable Adjustable
C-4010
3" Sq.
C-4011
3" Sq.
C-4015
3" Sq.
C-4017
3" Sq.
C-4018
3" Sq.
C-4019
3" Sq.
12"
3"
82 1/2"
68 1/2"
44"
40"
13"
C-4030
3" Sq.
60"
27"
41"
44"
54 1/2"
32"
10 1/2"
9"
27"
27"
3"
3"
COFFMAN STAIR PARTS • SINCE 1874
TRADITIONAL POST-TO-POST
2 1/4"
2 1/4"
2 3/8"
2 3/8"
1"
1"
3/16"
1 1/2"
25/64"
1 1/4"
1 1/2"
1 1/4"
2 1/2"
1 3/4 "
2 1/2"
C-6010 P
with Fillet
C-6031
Sub Rail
with Fillet
C-6032
Sub Rail
with Fillet
C-6010
C-7098
1 Riser
No Cap
3/8"
25/64"
C-7099
2 Riser
No Cap
Requires C-7237
Rosette on angle cut.
1 3/4"
1 1/4"
3/8"
25/64"
2 1/2"
3 1/8"
C-6045
Shoe Rail
with Fillet
C-6006
Shoe Rail
with Fillet
3/8"
25/64"
1 1/4"
1 3/4"
C-6050
Fillet
C-6007
Fillet
1"
3/4"
2 3/8"
5"
TWO OPTIONS AVAILABLE
Enlarged
for detail.
Enlarged for detail.
2 3/8"
2 3/8"
10"
13
SPECIFY BT
2 3/8"
2 3/8"
2 3/8"
2 3/8"
2 3/8"
2 3/8"
10"
13"
13"
5"
23 1/4"
23 1/4"
2 3/8"
2 3/8"
5"
5"
5"
5"
18 1/4"
72"
23 1/4"
18 1/4"
59 1/2"
53 1/2"
47 1/2"
82"
59 1/2"
59 1/2"
23 1/4"
68"
23 1/4"
23 1/4"
18 1/4"
59 1/2"
18 1/4"
47 1/2"
23 1/4"
53 1/2"
37 3/8"
25 7/8"
28 7/8"
27 7/8"
21 7/8"
16 7/8"
51 3/8"
33 3/8"
20 7/8"
23 7/8"
22 7/8"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
C-4040S
3" Sq.
C-4042S
3" Sq.
C-4045S
3" Sq.
C-4046S
3" Sq.
C-4040
3" Sq.
C-4042
3" Sq.
C-4045
3" Sq.
C-4046
3" Sq.
C-4046 L
3" Sq.
C-4055
3" Sq.
C-4058
3" Sq.
5 3/4"
5 3/4"
4 1/2"
4 1/2"
5 3/4"
17 1/2"
20 1/2"
17 1/2"
28 1/2"
25 1/2"
23 1/2"
32 1/2"
30 1/2"
17 1/2"
31"
36"
30"
19"
19"
41"
39"
36"
34"
43"
41"
36"
34"
17 3/4"
12 3/4"
8"
6 3/4"
10 1/2"
8"
10 1/2"
10 1/2"
8"
10 1/2"
8"
10 1/2"
8"
8"
10 1/2"
12 1/2"
10 1/2"
1 3/4"
1 3/4"
1 3/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5005
1 3/4" Sq.
C-5005
1 3/4" Sq.
C-5005
1 3/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5050
1 1/4" Sq.
C-5050
1 1/4" Sq.
5 1/8"
5 1/8"
5 1/8"
5 3/8"
5 3/8"
5 3/8"
5 3/4"
5 3/4"
5 3/8"
5 1/8"
22"
24"
41"
39"
31"
16 1/8"
36"
34"
17 1/2"
24"
24"
19"
5 3/8"
5 1/8"
19 1/8"
31"
21 1/8"
24 1/8"
17 1/2"
41"
39"
36"
34"
26 1/8"
36"
41"
17 3/4"
6 7/8"
6 7/8"
6 7/8"
1 1/4"
1 1/4"
1 1/4"
C-5067
1 1/4" Sq.
C-5067
1 1/4" Sq.
C-5067
1 1/4" Sq.
9 7/8"
1 1/4"
11 7/8"
1 1/4"
C-5067
C-5067
1 1/4" Sq. 1 1/4" Sq.
COFFMAN STAIR PARTS • SINCE 1874
9 1/2"
9 1/2"
9 1/2"
9 1/2"
9 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5070
1 1/4" Sq.
C-5070
1 1/4" Sq.
C-5070
1 1/4" Sq.
C-5070
1 1/4" Sq.
C-5070
1 1/4" Sq.
12 3/4"
1 1/4"
1 1/4"
C-5105
C-5105
1 1/4" Sq. 1 1/4" Sq.
9
CLASSIC OVER-THE-POST
2 5/8"
2 3/8"
1/2"
2"
C-6210-W
2 3/8"
C-6210-W
9/16"
1/4"
C-6015
Bending Mould
2 3/8"
C-6216-W
Bending Rail
1/4"
6"
6"
6"
6"
6"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
12 15/16"
12 15/16"
2 7/8"
12 15/16"
10 15/16"
7 15/16"
31"
36"
34"
5 11/16"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
41"
39"
5 11/16"
5 11/16"
13 1/2"
11 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
1"
5 1/2"
2 7/8"
1"
1"
5 1/2"
1"
5 1/2"
5 1/2"
2 7/8"
12 15/16"
1"
5 1/2"
2 7/8"
49"
12 15/16"
12 15/16"
5 11/16"
2 7/8"
12 15/16"
2 7/8"
12 15/16"
5 11/16"
44"
41"
5 11/16"
40"
5 11/16"
12"
16"
60"
5 11/16"
12"
13"
9"
32"
3 3/8"
3 3/8"
3 3/8"
3 1/2"
3 1/2"
C-4660
3 3/8" Dia.
Adjustable
C-4662
3 3/8" Dia.
Adjustable
C-4661
3 3/8" Dia.
use with
Volute
C-4210
3 1/2" Sq.
use with
Starting Easing
C-4215
3 1/2" Sq.
Intermediate
or Landing
Newel top diameter is 2-1/8"
1"
1"
6"
6"
6"
6"
6"
2 7/8"
2 7/8"
7 15/16"
31"
10 15/16"
34"
2 7/8"
2 7/8"
2 7/8"
12 15/16"
41"
39"
5 11/16"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
5 11/16"
11 1/2"
30"
30"
12 15/16"
12 15/16"
36"
1"
1"
1"
1"
49"
30"
50 1/2"
5 11/16"
41 1/2"
40"
9"
10 1/2"
9"
9"
45 1/2"
44"
13"
9"
9"
13 1/2"
30"
30"
31 1/2"
14 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-4060
2 3/4" Dia.
Adjustable
C-4061
2 3/4" Dia.
Adjustable
C-4063
2 3/4" Dia.
use with
Volute
C-4064
2 3/4" Dia.
use with
Turnout
C-4065
2 3/4" Dia.
Adjustable
C-4066
2 3/4" Dia.
Adjustable
10
COFFMAN STAIR PARTS • SINCE 1874
CLASSIC POST-TO-POST
2 5/8 "
2 5/8"
1 3/4"
3/8"
1"
2 3/8"
3 1/8"
3/8"
2"
1 3/4 "
2"
C-6210-W
C-6210W P1
with Fillet
C-6006
Shoe Rail
with Fillet
C-7298-W
1 Riser
No
Cap
3/8"
1 3/4"
C-7299-W
2 Riser
No
Cap
C-6007
Fillet
C-6210W P1
1 3/4" Plow
C-6210-W
6"
6"
6"
6"
6"
12 15/16"
10 15/16"
7 15/16"
36"
5 11/16"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
5 11/16"
11 1/2"
31"
13 1/2"
2 7/8"
12 15/16"
12 15/16"
12 15/16"
10 15/16"
34"
7 15/16"
5 11/16"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
41"
39"
34"
6"
6"
6"
12 15/16"
12 15/16"
2 7/8"
31"
2 7/8"
2 7/8"
2 7/8"
6"
6"
2 7/8"
41"
39"
36"
5 11/16"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
5 11/16"
5 11/16"
11 1/2"
13 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
3 1/2"
Enlarged for detail.
3 1/2"
3 1/2"
6"
6"
6"
2 7/8"
12 15/16"
10 15/16"
31"
12 15/16"
9 1/2"
9 1/2"
41"
39"
36"
34"
17 1/2"
5 11/16"
5 11/16"
17 1/2"
5 11/16"
5 11/16"
8 1/2"
3 1/2"
17 1/2"
12 15/16"
5 11/16"
2 7/8"
2 7/8"
16"
2 7/8"
2 7/8"
7 15/16"
16"
6"
6"
11 1/2"
8 1/2"
8 1/2"
72"
17 1/2"
13 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
C-5611
1 3/4" Sq.
TWO OPTIONS AVAILABLE
6
56"
47 1/2"
25 1/2"
17"
Enlarged for
detail.
35"
59 1/2"
22 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
C-4001
3 1/2" Sq.
C-4002
3 1/2" Sq.
C-4003
3 1/2" Sq.
C-4003 L
3 1/2" Sq.
4 3/4"
4 13/16"
Enlarged for detail.
Enlarged for detail.
SPECIFY BT
3 1/2"
13"
4 3/4"
3 1/2"
4 13/16"
4 13/16"
4 3/4"
7 3/16"
13"
4 13/16"
6 1/2"
2 7/8"
10 15/16"
2 7/8"
17 1/2"
17 1/2"
10 15/16"
2 7/8"
7 3/16"
17 1/2"
72"
56"
47 1/2"
56"
56"
471/2"
5 11/16"
10 15/16"
47 1/2"
67 1/4"
51 1/4"
42 3/4"
56"
72"
5 11/16"
5 11/16"
22"
5 11/16"
10 15/16"
59 1/2"
34 11/16"
28 1/2"
20"
2 7/8"
13"
6 1/2"
3 1/2"
24 1/2"
16"
22 3/16"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
C-4007
3 1/2" Sq.
C-4008
3 1/2" Sq.
C-4009
3 1/2" Sq.
C-4004
3 1/2" Sq.
C-4005
3 1/2" Sq.
C-4006
3 1/2" Sq.
C-4240
3 1/2" Sq.
C-4242
3 1/2" Sq.
C-4245
3 1/2" Sq.
C-4245 L
3 1/2" Sq.
COFFMAN STAIR PARTS • SINCE 1874
11
BRISTOL OVER-THE-POST
19/32" 7/32"
2 3/4 "
2 1/2"
2 3/4"
1/2"
2 1/4 "
11/32"
C-6110
C-6110
C-6115
Bending Mould
C-6116
Bending Rail
1"
1"
20"
1"
1"
1"
• Newel top diameters
are 2-15/16".
60"
20"
7"
20"
• 34-inch Bristol Balusters
can be trimmed for
31-inch applications.
20"
20"
49"
7"
44"
41"
7"
40"
7"
7"
12"
16"
12"
6 5/8"
32"
6 1/2"
6 7/8"
3"
3"
3"
3 1/4"
3 1/4"
15 5/8"
C-4160
3" Dia.
Adjustable
C-4165
3" Dia.
Adjustable
C-4163
3" Dia.
C-4130
3 1/4" Sq.
C-4135
3 1/4" Sq.
8 5/8"
11 7/8"
13"
9"
34"
21"
18 7/8"
41"
39"
36"
5"
5"
5"
5"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5151
1 3/4" Sq.
C-5151
1 3/4" Sq.
C-5151
1 3/4" Sq.
C-5151
1 3/4" Sq.
OPTIONS AVAILABLE
Enlarged for detail.
FLUTE
1"
1"
REED
20"
1"
1"
1"
60"
20"
7"
20"
20"
6 5/8"
6 1/2"
44"
6 7/8"
11 7/8"
41"
7"
40"
8 5/8"
7"
15 5/8"
7"
12"
21"
18 7/8"
16"
12"
36"
34"
20"
49"
7"
13"
9"
32"
41"
39"
5"
5"
5"
5"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5151-F
1 3/4" Sq.
Flute
C-5151-F
1 3/4" Sq.
Flute
C-5151-F
1 3/4" Sq.
Flute
C-5151-F
1 3/4" Sq.
Flute
3"
3"
3"
3 1/4"
3 1/4"
C-4160-F
3" Dia.
Flute
Adjustable
C-4165-F
3" Dia.
Flute
Adjustable
C-4163-F
3" Dia.
Flute
C-4130-F
3 1/4" Sq.
Flute
C-4135-F
3 1/4" Sq.
Flute
1"
1"
20"
1"
1"
1"
6 5/8"
6 7/8"
20"
15 5/8"
18 7/8"
36"
7"
44"
41"
39"
5"
5"
5"
5"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
20"
49"
21"
41"
7"
40"
34"
7"
20"
8 5/8"
11 7/8"
60"
20"
6 1/2"
7"
7"
12"
16"
12"
13"
9"
32"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
3"
3"
3"
3 1/4"
3 1/4"
C-5151-R
1 3/4" Sq.
Reed
C-5151-R
1 3/4" Sq.
Reed
C-5151-R
1 3/4" Sq.
Reed
C-5151-R
1 3/4" Sq.
Reed
C-4160-R
3" Dia.
Reed
Adjustable
C-4165-R
3" Dia.
Reed
Adjustable
C-4163-R
3" Dia.
Reed
C-4130-R
3 1/4" Sq.
Reed
C-4135-R
3 1/4" Sq.
Reed
12
COFFMAN STAIR PARTS • SINCE 1874
BRISTOL POST-TO-POST
2 3/4 "
2 3/4 "
1 3/4"
3/8"
1"
2 3/4"
2 3/4"
3 1/8"
C-6006
Shoe Rail
with Fillet
3/8"
2 1/4 "
1 3/4 "
2 1/4 "
C-6110
C-6110 P1
with Fillet
3/8"
C-7199
2 Riser
No Cap
1 3/4"
C-6007
Fillet
Enlarged for detail.
C-6110 P1
1 3/4" Plow
C-6110
5 1/4"
5 1/4"
5 1/4"
5 1/4"
5"
5 1/4"
12"
5"
15"
5 1/4"
12"
15"
16"
12 1/2"
7"
12 1/2"
12 1/2"
7"
7"
59 1/2"
59 1/2"
26 1/4"
7"
59 1/2"
20 1/4"
19 3/4"
59 1/2"
26 1/4"
19 3/4"
7"
53 1/2"
59 1/2"
22 3/4"
7"
7"
7"
53 1/2"
59 1/2"
22 3/4"
7"
7"
7"
53 1/2"
15"
12 1/2"
12 1/2"
7"
12"
16"
16"
12 1/2"
5 1/4"
5"
16"
16"
5 1/4"
5"
5 1/4"
5"
16"
20 1/4"
5 1/4"
5 1/4"
5"
5 1/4"
20 1/4"
59 1/2"
26 1/4"
59 1/2"
22 3/4"
59 1/2"
19 3/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
C-4150
3 1/4" Sq.
C-4152
3 1/4" Sq.
C-4155
3 1/4" Sq.
C-4156
3 1/4" Sq.
C-4150-F
3 1/4" Sq.
Flute
C-4152-F
3 1/4" Sq.
Flute
C-4155-F
3 1/4" Sq.
Flute
C-4156-F
3 1/4" Sq.
Flute
C-4150-R
3 1/4" Sq.
Reed
C-4152-R
3 1/4" Sq.
Reed
C-4155-R
3 1/4" Sq.
Reed
C-4156-R
3 1/4" Sq.
Reed
6 5/8"
6 1/2"
6 1/2"
6 5/8"
6 7/8"
8 5/8"
8 5/8"
8 5/8"
15 5/8"
11 7/8"
34"
21"
18 7/8"
39"
34"
41"
21"
18 7/8"
15 5/8"
11 7/8"
36"
6 1/2"
6 5/8"
6 7/8"
6 7/8"
11 7/8"
36"
39"
15 5/8"
34"
41"
21"
18 7/8"
36"
39"
41"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5141
1 3/4" Sq.
C-5141
1 3/4" Sq.
C-5141
1 3/4" Sq.
C-5141
1 3/4" Sq.
C-5141-F
1 3/4" Sq.
Flute
C-5141-F
1 3/4" Sq.
Flute
C-5141-F
1 3/4" Sq.
Flute
C-5141-F
1 3/4" Sq.
Flute
C-5141-R
1 3/4" Sq.
Reed
C-5141-R
1 3/4" Sq.
Reed
C-5141-R
1 3/4" Sq.
Reed
C-5141-R
1 3/4" Sq.
Reed
6 5/8"
6 1/2"
6 5/8"
6 7/8"
8 5/8"
11 7/8"
6 1/2"
11 7/8"
39"
36"
34"
8 5/8"
21"
18 7/8"
41"
6 1/2"
6 7/8"
8 5/8"
15 5/8"
6 5/8"
6 7/8"
15 5/8"
11 7/8"
36"
34"
21"
18 7/8"
41"
39"
15 5/8"
36"
34"
21"
18 7/8"
41"
39"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5151
1 3/4" Sq.
C-5151
1 3/4" Sq.
C-5151
1 3/4" Sq.
C-5151
1 3/4" Sq.
C-5151-F
1 3/4" Sq.
Flute
C-5151-F
1 3/4" Sq.
Flute
C-5151-F
1 3/4" Sq.
Flute
C-5151-F
1 3/4" Sq.
Flute
C-5151-R
1 3/4" Sq.
Reed
C-5151-R
1 3/4" Sq.
Reed
C-5151-R
1 3/4" Sq.
Reed
C-5151-R
1 3/4" Sq.
Reed
COFFMAN STAIR PARTS • SINCE 1874
13
MARION OVER-THE-POST
2 5/8"
22 1/2"
3"
31"
30 1/2"
27 1/2"
25 1/2"
34"
32 1/2"
41"
39"
36"
2 5/8"
8 1/2"
C-6719
11/16"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5251
1 3/4" Sq.
C-5251
1 3/4" Sq.
C-5251
1 3/4" Sq.
C-5251
1 3/4" Sq.
C-5251
1 3/4" Sq.
1"
3"
1"
C-6719
28"
1"
1"
1"
C-6715
Bending Mould
28"
28"
28"
9/16" 1/4"
28"
49"
44"
60"
41"
40"
31"
11"
3"
15"
11"
C-6716
Bending Rail
12"
9"
3 1/4"
3 1/4"
3 1/4"
3 1/2"
3 1/2"
C-4255
3 1/4" Dia.
Adjustable
C-4257
3 1/4" Dia.
Adjustable
C-4256
3 1/4" Dia.
use with
Volute
C-4272
3 1/2" Sq.
use with
Volute or
Starting Easing
C-4277
3 1/2" Sq.
Newel top diameter is 2-3/16"
CHIPPENDALE OVER-THE-POST
7 1/2"
9 1/2"
10 1/2"
12 1/2"
15 1/2"
17 1/2"
9 1/2"
9 1/2"
9 1/2"
9 1/2"
34"
31"
11/16"
41"
39"
36"
5 1/2"
5 1/2"
5 1/2"
5 1/2"
5 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5211
1 3/4" Sq.
Flute
C-5211
1 3/4" Sq.
Flute
C-5211
1 3/4" Sq.
Flute
C-5211
1 3/4" Sq.
Flute
C-5211
1 3/4" Sq.
Flute
1"
1"
28"
1"
3"
1"
1"
28"
28"
C-6715
Bending Mould
2 5/8"
28"
49"
28"
60"
44 "
41"
40"
31"
11"
9/16" 1/4"
11"
15"
3 1/4"
3 1/4"
3 1/4"
3 1/2"
3 1/2"
C-4250
3 1/4" Dia.
Flute
Adjustable
C-4252
3 1/4" Dia.
Flute
Adjustable
C-4251
3 1/4" Dia.
Flute
use with
Volute
C-4270
3 1/2" Sq.
Flute
use with
Volute or
Starting Easing
C-4275
3 1/2" Sq.
Flute
Intermediate
or Landing
12"
9"
3"
3"
2 5/8"
C-6719
C-6719
C-6716
Bending Rail
Newel top diameter is 2-3/16"
14
COFFMAN STAIR PARTS • SINCE 1874
MARION POST-TO-POST
2 5/8"
2 5/8"
1 3/4"
3/8"
1"
3"
3"
3 1/8"
C-6006
Shoe Rail
with Fillet
3/16"
3/8"
2 5/8"
1 3/4 "
2 5/8"
C-6719
C-7799
2 Riser
No Cap
3/8"
1 3/4"
C-6719 P1
with Fillet
C-6007
Fillet
4 1/2"
Enlarged for detail.
13"
4 1/2"
4 1/2"
C-6719 P1
1 3/4" Plow
C-6719
13"
5"
18 1/2"
4 1/2"
5"
6"
6"
22 1/2"
6"
6"
6"
25 1/2"
22 1/2"
16 1/2"
21 1/2"
19 1/2"
31"
18 1/2"
56"
24 1/2"
36"
34"
30 1/2"
27 1/2"
32 1/2"
22 1/2"
72"
48"
26 1/2"
39"
34"
31"
41"
36"
39"
36"
60"
41"
24"
24"
16"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
8 1/2"
1 3/4"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
8 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
C-4282
3 1/2" Sq.
C-4282 L
3 1/2" Sq.
C-4287
3 1/2" Sq.
C-4287 L
3 1/2" Sq.
1 3/4"
C-5251 C-5251 C-5251 C-5251 C-5251
1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.
C-5241 C-5241 C-5241
C-5241
C-5241
1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.
CHIPPENDALE POST-TO-POST
2 5/8"
2 5/8"
1 3/4"
3/8"
3"
3"
1"
3/8"
1 3/4"
3 1/8"
3/16"
1 3/4 "
2 5/8"
C-6719
C-6007
Fillet
C-6006
Shoe Rail
with Fillet
3/8"
2 5/8"
C-7799
2 Riser
No Cap
C-6719 P1
with Fillet
4 1/2"
Enlarged for detail.
C-6719
4 1/2"
1 1/2"
4 1/2"
9 1/2"
9 1/2"
31"
5 1/2"
2 3/4"
2 3/4"
13"
6 3/4"
6 3/4"
9"
56"
9 1/2"
11 1/2"
9 1/2"
9 1/2"
7 1/2"
10 1/2"
12 1/2"
15 1/2"
17 1/2"
13"
9 1/2"
9 1/2"
9 1/2"
9 1/2"
6 3/4"
72"
6 3/4"
48"
9 1/2"
5 1/2"
9 1/2"
41"
39"
36"
5 1/2"
9"
2 3/4"
5"
6"
6 1/2"
34"
5 1/2"
4 1/2"
6"
6"
6"
2 3/4"
13"
5"
C-6719 P1
1 3/4" Plow
6"
13"
4 1/2"
31"
5 1/2"
5 1/2"
34"
5 1/2"
36"
5 1/2"
41"
39"
5 1/2"
36"
60"
24"
24"
5 1/2"
16"
8 1/2"
1 3/4"
8 1/2"
1 3/4"
8 1/2"
1 3/4"
8 1/2"
1 3/4"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
C-5201 C-5201 C-5201
C-5201 C-5201
1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.
Flute
Flute
Flute
Flute
Flute
8 1/2"
1 3/4"
8 1/2"
1 3/4"
8 1/2"
1 3/4"
8 1/2"
1 3/4"
C-5211
C-5211
C-5211 C-5211
C-5211
1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.
Flute
Flute
Flute
Flute
Flute
COFFMAN STAIR PARTS • SINCE 1874
3 1/2"
3 1/2"
3 1/2"
3 1/2"
C-4280
3 1/2" Sq.
Flute
C-4280 L
3 1/2" Sq.
Flute
C-4285
3 1/2" Sq.
Flute
C-4285 L
3 1/2" Sq.
Flute
15
VICTORIAN OVER-THE-POST
9/16"
2 5/8"
2 3/8"
1/4"
1/2"
2 3/8"
2 3/8"
2"
C-6210-W
C-6216-W
Bending Rail
1/4"
C-6210-W
C-6015
Bending Mould
1"
1"
28"
1"
1"
1"
28"
11 1/2"
18 1/2"
16 1/2"
13 1/2"
28"
28"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
31"
41"
31"
41"
39"
5 1/2"
5 1/2"
5 1/2"
5 1/2"
5 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
8 1/2"
60"
28"
40"
8 1/2"
8 1/2"
36"
34"
49"
44"
11"
11"
15"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
3 1/4"
3 1/4"
C-5231
1 3/4" Sq.
Twist
C-5231
1 3/4" Sq.
Twist
C-5231
1 3/4" Sq.
Twist
C-5231
1 3/4" Sq.
Twist
C-5231
1 3/4" Sq.
Twist
C-4260
3 1/4" Dia.
Twist
Adjustable
C-4262
3 1/4" Dia.
Twist
Adjustable
12"
9"
3 1/4"
3 1/2"
C-4271
C-4261
3 1/2" Sq.
3 1/4" Dia.
Twist
Twist
use with
use with
Starting Easing
Volute
Newel top diameter is 2-3/16"
3 1/2"
C-4276
3 1/2" Sq.
Twist
Intermediate
or Landing
ART DECO OVER-THE-POST
23/32"
9/16" 1/4"
1 7/8"
2 7/8"
2 7/8"
2 7/8"
2 3/8"
C-6816
Bending Rail
C-6810
C-6815
Bending Mould
31 1/2"
C-6810
31 1/2"
72"
31 1/2"
24 3/4"
26 3/4"
29 3/4"
36"
34"
31 3/4"
39"
50 1/2"
41"
31 1/2"
48"
40 1/2"
45 1/2"
10"
16 1/2"
9 1/4"
1 9/16"
9 1/4"
1 9/16"
9 1/4"
1 9/16"
9 1/4"
1 9/16"
C-5845
C-5845
C-5845
C-5845
1 9/16" Dia. 1 9/16" Dia. 1 9/16" Dia. 1 9/16" Dia.
NOTE: Placement of Art Deco Newels will sometimes
differ from standard newel locations because of the
contemporary styling of the Art Deco fittings.
16
14"
9"
3 1/4"
C-4860
3 1/4" Dia.
use with
Turnout
3 1/4"
3 1/2"
3 1/2"
C-4810
C-4862
C-4815
3 1/2" Sq.
3 1/4" Dia.
3 1/2" Sq.
use with
Adjustable Intermediate
or Landing Vertical Volute
or Starting Easing
Newel top diameter is 1-1/8"
COFFMAN STAIR PARTS • SINCE 1874
VICTORIAN POST-TO-POST
2 5/8 "
2 5/8"
1 3/4"
3/8"
1"
2 3/8"
3/8"
2"
1 3/4 "
2"
C-6210-W
C-6210W P1
with Fillet
3/8"
1 3/4"
3 1/8"
C-6007
Fillet
C-6006
Shoe Rail
with Fillet
C-7299-W
2 Riser
No
Cap
4 1/2"
Enlarged for detail.
13"
4 1/2"
4 1/2"
C-6210-W
C-6210W P1
1 3/4" Plow
2 3/4"
13"
5"
4 1/2"
6"
6"
6"
6"
6"
2 1/2"
8 1/2"
5 1/2"
7 1/2"
10 1/2"
8 1/2"
8 1/2"
8 1/2"
34"
31"
5 1/2"
5 1/2"
11 1/2"
13 1/2"
16 1/2"
8 1/2"
8 1/2"
8 1/2"
41"
31"
5 1/2"
2 3/4"
13"
13"
6 3/4"
6 3/4"
9"
56"
72"
6 3/4"
36"
48"
8 1/2"
5 1/2"
2 3/4"
18 1/2"
8 1/2"
8 1/2"
39"
36"
5 1/2"
5 1/2"
12 1/2"
9"
2 3/4"
5"
39"
36"
34"
5 1/2"
5 1/2"
5 1/2"
6 3/4"
8 1/2"
60"
24"
41"
24"
5 1/2"
16"
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
8 1/2"
1 3/4"
1 3/4"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
C-5221 C-5221 C-5221 C-5221 C-5221
1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.
Twist
Twist
Twist
Twist
Twist
8 1/2"
8 1/2"
8 1/2"
1 3/4"
1 3/4"
1 3/4"
8 1/2"
1 3/4"
C-5231 C-5231
C-5231
C-5231
C-5231
1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq. 1 3/4" Sq.
Twist
Twist
Twist
Twist
Twist
3 1/2"
3 1/2"
3 1/2"
3 1/2"
C-4281
3 1/2" Sq.
Twist
C-4281 L
3 1/2" Sq.
Twist
C-4286
3 1/2" Sq.
Twist
C-4286 L
3 1/2" Sq.
Twist
ART DECO POST-TO-POST
1 7/8"
2 7/8"
2 3/8"
Enlarged for detail.
C-6810
5"
C-7899
2 Riser
No Cap
13"
5"
6 1/2"
C-6810
19"
72"
19"
56"
24 3/4"
26 3/4"
31 3/4"
35"
36"
34"
9 1/4"
29 3/4"
9 1/4"
9 1/4"
25 1/2"
41"
39"
9 1/4"
1 9/16"
1 9/16"
1 9/16"
1 9/16"
3 1/2"
3 1/2"
C-5845
1 9/16" Dia.
C-5845
1 9/16" Dia.
C-5845
1 9/16" Dia.
C-5845
1 9/16" Dia.
C-4840
3 1/2" Sq.
C-4845
3 1/2" Sq.
COFFMAN STAIR PARTS • SINCE 1874
17
LIBERTY OVER-THE-POST
3/8"
2"
2 3/8"
5/8"
1/4"
2 5/32"
2 1/2"
2 1/4"
1/2"
C-6510
C-6510
C-6515
Bending Mould
C-6516
Bending Rail
1"
5"
1"
6"
6"
6"
7 15/16"
31"
6"
6"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
31"
1 1/4"
1 1/4"
1 1/4"
C-5661
1 1/4" Sq.
Flute
C-5661
1 1/4" Sq.
Flute
C-5661
1 1/4" Sq.
Flute
36"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
3"
3"
C-4565
C-4563
3" Sq.
3" Sq.
Flute
Flute
Newel top
diameter is 1-11/16"
6"
2 7/8"
12 15/16"
20 1/2"
41"
39"
5 11/16"
20 1/2"
1 1/4"
2 7/8"
5 11/16"
30 1/2"
13 1/2"
11 1/2"
C-5661
1 1/4" Sq.
Flute
12 15/16"
10 15/16"
34"
7 15/16"
44"
5 11/16"
5 11/16"
1 1/4"
12 15/16"
2 7/8"
39"
36"
54"
41"
C-5661
1 1/4" Sq.
Flute
2 7/8"
2 7/8"
17 1/2"
12 15/16"
12 15/16"
10 15/16"
34"
5 11/16"
6"
6"
2 7/8"
12 15/16"
2 7/8"
17 1/2"
2 7/8"
2 7/8"
2 7/8"
5"
6"
6"
5 11/16"
5 11/16"
31"
8"
13 1/2"
11 1/2"
25 1/2"
23 1/2"
36"
34"
10 1/2"
8"
10 1/2"
8"
30 1/2"
28 1/2"
41"
39"
10 1/2"
8"
32 1/2"
10 1/2"
8"
10 1/2"
43"
8"
10 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5610
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
C-5015
1 1/4" Sq.
1"
1"
1"
1"
1"
1"
20 1/2"
5"
1"
1"
1"
1"
1"
27"
5"
50 1/2"
41 1/2"
26"
16"
3"
C-4510
3" Sq.
18
22 1/2"
3"
3"
9"
3"
C-4511
C-4515
C-4516
3" Sq.
3" Sq.
3" Sq.
Newel top diameter is 2-1/4"
2 3/4"
17 1/2"
54"
2 3/4"
9"
10 1/2"
9"
9"
2 3/4"
C-4061
C-4063
C-4064
2 3/4" Dia. 2 3/4" Dia. 2 3/4" Dia.
Adjustable use with use with
Volute
Turnout
45 1/2"
44"
44"
32 1/2"
17 1/2"
49"
54"
54"
44"
30"
30"
31 1/2"
6"
30"
30"
20 1/2"
27"
17 1/2"
44"
44"
30 1/2"
13"
20 1/2"
14 1/2"
2 3/4"
2 3/4"
C-4065
2 3/4" Dia.
Adjustable
C-4066
2 3/4" Dia.
Adjustable
3"
20 1/2"
3"
C-4535
C-4530
3" Sq.
3" Sq.
Newel top
diameter is 1-11/16"
3"
C-4531
3" Sq.
Newel top
diameter is 1"
COFFMAN STAIR PARTS • SINCE 1874
LIBERTY POST-TO-POST
2"
2"
2"
1 3/4"
1 1/4"
2 3/8"
2 3/8"
2 3/8"
3/8"
25/64"
1"
3/4"
3/16"
3/16"
2 1/4"
3/8"
25/64"
1 1/4"
2 1/4"
1 3/4 "
2 1/4"
C-6510 P
with Fillet
C-6510 P1
with Fillet
C-6510
2 1/2"
3 1/8"
C-6045
Shoe Rail
with Fillet
C-6006
Shoe Rail
with Fillet
3/8"
25/64"
1 3/4"
1 1/4"
C-6007
Fillet
C-6050
Fillet
C-6510 P1
1 3/4" Plow
C-6510 P
1 1/4" Plow
C-6510
6"
6"
6"
6"
6"
C-7599
2 Riser
No Cap
12 15/16"
12 15/16"
2 7/8"
12 15/16"
10 15/16"
34"
31"
2 7/8"
2 7/8"
2 7/8"
7 15/16"
2 7/8"
41"
39"
36"
5 11/16"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
5 11/16"
5 11/16"
13 1/2"
11 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5661
1 1/4" Sq.
Flute
C-5661
1 1/4" Sq.
Flute
C-5661
1 1/4" Sq.
Flute
C-5661
1 1/4" Sq.
Flute
C-5661
1 1/4" Sq.
Flute
4"
4"
4"
13"
13"
17 1/2"
4"
6 1/2"
5 1/8"
5 1/8"
5 3/4"
5 1/8"
5 1/8"
24"
41"
39"
31"
34"
17 1/2"
17 1/2"
5 3/4"
17 1/2"
17 3/4"
6 7/8"
6 7/8"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
4"
17 3/4"
1 3/4"
1 1/4"
1 1/4"
C-5105
C-5105
1 1/4" Sq. 1 1/4" Sq.
1 3/4"
20"
4"
23"
3"
3"
3"
C-4550BT C-4555BT C-4556BT C-4557BT
3" Sq.
3" Sq.
3" Sq.
3" Sq.
4"
4"
68"
17 1/2"
6 1/2"
68"
13"
17 1/2"
68"
17 1/2"
54"
17 1/2"
17 1/2"
23"
13"
6 1/2"
17 1/2"
13"
5"
4"
4"
5"
23"
68"
3"
C-5005
1 3/4" Sq.
13"
4"
4"
17 1/2"
54"
17 1/2"
48"
54"
54"
54"
36"
44"
22"
33 1/2"
33 1/2"
27 1/2"
28"
16"
26"
Enlarged for detail.
5"
48"
19 1/2"
4"
4"
5"
1 3/4"
C-5005
C-5005
1 3/4" Sq. 1 3/4" Sq.
13"
23"
33 1/2"
36"
12 3/4"
4"
5"
54"
6 3/4"
C-5067
C-5067 C-5067 C-5067 C-5067
1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
4"
17 1/2"
48"
30"
12 3/4"
11 7/8"
9 7/8"
6 7/8"
17 1/2"
54"
41"
36"
36"
17 1/2"
17 1/2"
41"
68"
17 1/2"
5 3/4"
24"
24"
22"
5 3/4"
5 3/4"
5 1/8"
19"
6 1/2"
19 1/2"
17"
20"
26"
19 1/2"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
3"
C-4540BT
3" Sq.
C-4542BT
3" Sq.
C-4547BT
3" Sq.
C-4548BT
3" Sq.
C-4541BT
3" Sq.
C-4544BT
3" Sq.
C-4545BT
3" Sq.
C-4546BT
3" Sq.
C-4560BT
3" Sq.
Flute
C-4564BT
3" Sq.
Flute
C-4566BT
3" Sq.
Flute
C-4567BT
3" Sq.
Flute
COFFMAN STAIR PARTS • SINCE 1874
19
CRAFTSMAN POST-TO-POST
Coffman’s Craftsman
series of newels, balusters
and handrails offer the
contemporary look
of modern components.
The straight lines and
eased edges will please
the eye and the touch.
5 1/2"
2 3/4"
5 1/2"
1 5/8"
C-6302
1 5/8"
1 5/8"
C-6300
C-6301
2 3/4"
2 1/4"
2 3/4"
1 5/8"
1 5/8"
1 3/4"
5 3/8"
1/4"
3 5/16"
3/8"
1 3/4"
1 1/4"
C-6700 P
with Fillet
C-6700 P1
with Fillet
C-6770 P
with Fillet
1 3/4"
1 1/4"
1 3/4"
27/32"
4 3/16"
2 3/32"
C-7318
Rosette
1/4"
1 1/4"
Top View
showing
Chamfer
3/4"
3/4"
3/4"
15 1/4"
C-6002
Shoe Rail
with Fillet
15 1/4"
16"
16"
20"
56"
48"
48"
56"
16 1/2"
56"
16 1/2"
24"
24"
3"
3"
3"
3"
3"
3"
C-4074
3" Sq.
C-4074 EE
3" Sq.
C-4474 C
3" Sq.
Chamfer
C-4074 C
3" Sq.
Chamfer
C-4474 F
3" Sq.
Flute
C-4074 F
3" Sq.
Flute
Top View
showing
Eased Edge
Top View
showing
Chamfer
3/4"
3/4"
3/4"
3/4"
3/4"
15 1/4"
10 3/4"
15 1/4"
10 3/4"
16"
16"
20"
56"
20"
56"
48"
56"
16 1/2"
24"
48"
56"
16 1/2"
24"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
C-4076
3 1/2" Sq.
C-4076 EE
3 1/2" Sq.
C-4476 C
3 1/2" Sq.
Chamfer
C-4076 C
3 1/2" Sq.
Chamfer
C-4476 F
3 1/2" Sq.
Flute
C-4076 F
3 1/2" Sq.
Flute
20
C-6001
Shoe Rail
with Fillet
10 3/4"
20"
3/4"
2 27/64"
3/4"
10 3/4"
56"
27/32"
2 27/64"
C-6000 P
with Fillet
3/4"
3/4"
3/8"
1/4"
3/4"
Top View
showing
Eased Edge
1/4"
1 1/4"
COFFMAN STAIR PARTS • SINCE 1874
CRAFTSMAN POST-TO-POST
5 3/8"
5 3/8"
5 3/8"
5 3/8"
19 1/8"
24 1/8"
21 1/8"
34"
39"
36"
9 1/2"
26 1/8"
41"
9 1/2"
9 1/2"
41"
36"
34"
9 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5770
1 1/4" Sq.
C-5770
1 1/4" Sq.
C-5770
1 1/4" Sq.
C-5770
1 1/4" Sq.
C-5060
1 1/4" S4S
C-5060
1 1/4" S4S
C-5060
1 1/4" S4S
Top View showing
Eased Edge.
Top View showing
Chamfer.
6 1/2"
6 1/2"
6 1/2"
6 1/2"
18 1/2"
36"
18 1/2"
18 1/2"
41"
18 1/2"
41"
36"
41"
36"
16"
16"
11"
11"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
C-5060 EE
1 1/4" Sq.
C-5060 EE
1 1/4" Sq.
C-5060 C
1 1/4" Sq.
Chamfer
C-5060 C
1 1/4" Sq.
Chamfer
C-5060 F
1 1/4" Sq.
Flute
C-5060 F
1 1/4" Sq.
Flute
Top View showing
Eased Edge.
Top View showing
Chamfer.
6 1/2"
6 1/2"
6 1/2"
6 1/2"
18 1/2"
18 1/2"
30"
36"
41"
36"
41"
18 1/2"
18 1/2"
36"
41"
36"
41"
16"
16"
11"
11"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5360
1 3/4" S4S
C-5360
1 3/4" S4S
C-5360
1 3/4" S4S
C-5360 EE
1 3/4" Sq.
C-5360 EE
1 3/4" Sq.
C-5360 C
1 3/4" Sq.
Chamfer
C-5360 C
1 3/4" Sq.
Chamfer
C-5360 F
1 3/4" Sq.
Flute
C-5360 F
1 3/4" Sq.
Flute
COFFMAN STAIR PARTS • SINCE 1874
21
HAMPTON POST-TO-POST
2 5/16"
3/8"
1 3/4 "
2 17/32"
C-6005 P1
1 3/4" Plow
C-6005 P1
1 3/4" Plow
with Fillet
1 3/4"
3/8"
3/8"
1 3/4"
1"
C-6007
Fillet
3 1/8"
C-6006
Shoe Rail
with Fillet
5 3/4"
6"
17 1/2"
31"
41"
30"
17 3/4"
36"
5 11/16"
5 11/16"
8 1/2"
8 1/2"
8 1/2"
6 3/4"
41"
39"
34"
5 11/16"
12 3/4"
12 15/16"
12 15/16"
12 15/16"
10 15/16"
7 15/16"
36"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
17 1/2"
17 1/2"
6"
6"
5 3/4"
6"
6"
5 3/4"
5 11/16"
36"
30"
5 11/16"
41"
13 1/2"
11 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
C-5005
1 3/4" Sq.
C-5005
1 3/4" Sq.
C-5005
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
C-5601
1 3/4" Sq.
1 3/4"
1 3/4"
1 3/4"
C-5360
C-5360
C-5360
1 3/4" S4S 1 3/4" S4S 1 3/4" S4S
TWO OPTIONS AVAILABLE
Enlarged for detail.
Enlarged for detail.
Enlarged for detail.
4 3/4"
3 1/2"
4"
SPECIFY BT
3 1/2"
3 1/2"
3 1/2"
4"
4 3/4"
16"
16"
4"
4 3/4"
9 1/2"
4"
17 1/2"
9 1/2"
68"
17 1/2"
17 1/2"
47 1/2"
17 1/2"
56"
49"
43 "
72"
56"
72"
72"
56"
47 1/2"
25 1/2"
17"
42 3/4"
60"
53"
47"
35"
59 1/2"
67 1/4"
51 1/4"
22 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
3"
3"
3"
3"
C-4001
3 1/2" Sq.
C-4002
3 1/2" Sq.
C-4003
3 1/2" Sq.
C-4003 L
3 1/2" Sq.
C-4004
3 1/2" Sq.
C-4005
3 1/2" Sq.
C-4006
3 1/2" Sq.
C-4070
3" Sq.
C-4072
3" Sq.
C-4073
3" Sq.
C-4073 L
3" Sq.
22
COFFMAN STAIR PARTS • SINCE 1874
RICHMOND RAIL
2 5/8"
17/32"
2 5/8"
2 3/8"
2 3/8"
2 3/8"
2 1/4"
1/2"
3/8"
11/32"
1 3/4 "
2 1/4"
C-6410
C-6415
Bending Mould
C-6416
Bending Rail
C-6410 P1
with Fillet
1 3/4"
3/8"
1"
3/8"
1 3/4"
3 1/8"
C-6410
C-6006
Shoe Rail
with Fillet
C-6410 P1
For a complete line of fittings to be used with Richmond Rail, refer to page 25.
C-6007
Fillet
VIRGINIAN RAIL
5/8"
5/16"
2 5/8"
2 5/8"
2"
2"
1 5/8"
2 1/4"
2"
25/64"
1 1/4"
1 5/8"
C-6610
C-6616
9 Piece
Bending Rail
C-6610 P
C-6615
Bending Mould
1 1/4"
25/64"
3/4"
C-6610 P
C-6610
For a complete line of fittings to be used with Virginian Rail, refer to page 25.
25/64"
2 1/2"
1 1/4"
C-6045
Shoe Rail
with Fillet
C-6050
Fillet
WALL RAILS
1 3/4"
2 1/4"
1 5/8"
2 1/4"
2 1/4"
1 9/32"
3 1/4"
1"
1 1/8"
C-6040
C-6040
C-7023
Quarterturn
C-7024
Starting Easing
COFFMAN STAIR PARTS • SINCE 1874
C-7000
Acorn
C-7025
Over Easing
1 5/16"
C-6042
C-6042
C-7005
Quarterturn
23
FITTINGS
TRADITIONAL/CLASSIC
STARTING FITTINGS
4 7/8" Center
of Rail to
Center of
Newel Cap
2 1/4"
The second digit of the fitting part
number must match the second digit
of the rail part number.
Example:
C-6010 Rail = C-70XX Fittings
C-6210W Rail = C-72XXW Fittings
2 3/8"
1 1/2"
TRADITIONAL
C-6010
C-7030
C-7230-W
Left Hand Volute
5 1/4" Center
of Rail to
Center of
Newel Cap
C-7033
C-7233-W
Left Hand Volute
Ascending
C-7035
C-7235-W
Right Hand Volute
2 7/8" Center of
Rail to Center of
Newel Cap
4 7/8" Center of
Rail to Center of
Newel Cap
2 5/8"
C-7038
C-7238-W
Right Hand Volute
Ascending
2 3/8"
2"
CLASSIC
C-6210-W
C-7010
C-7210-W
Starting Easing
With Cap
C-7031
Vertical Volute
C-7040
C-7240-W
Left Hand
Turnout
C-7045
C-7245-W
Right Hand
Turnout
C-7041
C-7241-W
Left Hand
Turnout
C-7046
C-7246-W
Right Hand
Turnout
TRANSITION FITTINGS
C-7001
Rail Drop
C-7007
C-7207-W
Coped End
C-7016
C-7216-W
Over Easing
Returned End
C-7018
C-7218-W
Newel Cap
C-7009
C-7209-W
Returned
End
C-7019
C-7219-W
Opening Cap
C-7011
C-7211-W
Level
Quarterturn 90°
C-7012S
C-7212S-W
Up Easing
C-7020
C-7220-W
Tandem Cap
C-7021
C-7221-W
Quarterturn
Cap 90°
C-7013
C-7213-W
Over
Easing
7014S
7214S-W
Up Easing 90°
C-7022
C-7222-W
Level Cap 45°
C-7015
C-7215-W
Starting Easing
Returned End
C-7047
C-7247-W
5" Center to Center
Left or Right (LH shown)
GOOSENECK FITTINGS
C-7050
C-7055
C-7250-W
C-7255-W
Left Hand Right Hand
2 Riser No Cap 90°
C-7060
C-7065
C-7260-W C-7265-W
Left Hand Right Hand
2 Riser With Cap 90°
C-7061
C-7066
C-7261-W C-7266-W
Left Hand Right Hand
2 Riser With Cap 45°
C-7070
C-7075
C-7270-W C-7275-W
Left
Right
Hand
Hand
1 Riser No Cap 90°
C-7071
C-7076
C-7271-W C-7276-W
Left
Right
Hand
Hand
2 Riser No Cap 90°
C-7080
C-7085
C-7280-W C-7285-W
Left
Right
Hand
Hand
1 Riser With Cap 90°
5 1/2" Center of Rail
to Center of Rail
5 1/2" Center of Rail
to Center of Rail
C-7081
C-7086
C-7281-W C-7286-W
Left
Right
Hand
Hand
2 Riser With Cap 90°
24
C-7082
C-7087
C-7282-W C-7287-W
Left
Right
Hand
Hand
2 Riser With Cap 45°
C-7090
C-7095
C-7290-W C-7295-W
Left
Right
Hand
Hand
1 Riser Landing Return
No Cap 180°
C-7091
C-7094
C-7291-W C-7294-W
Left
Right
Hand
Hand
2 Riser Landing Return
No Cap 180°
C-7088
C-7288-W
1 Riser
With
Tandem
Cap
C-7089
C-7289-W
2 Riser
With
Tandem
Cap
C-7096
C-7296-W
1 Riser
With
Cap
C-7097
C-7297-W
2 Riser
With
Cap
C-7098
C-7298-W
1 Riser
No
Cap
C-7099
C-7299-W
2 Riser
No
Cap
COFFMAN STAIR PARTS • SINCE 1874
FITTINGS
BRISTOL/RICHMOND/LIBERTY/MARION
STARTING FITTINGS
5" Center of
Rail to Center
of Newel Cap
2 3/4 "
2"
2 5/8"
2 3/4"
2 1/4 "
BRISTOL
C-6110
2 3/8"
2 5/8"
2"
2 3/8"
2 1/4"
2 1/4"
1 5/8"
RICHMOND
C-6410
LIBERTY
C-6510
66
VIRGINIAN
C-6610
The second digit of the fitting part number
must match the second digit of rail part number.
Example:
C-6110 Rail = C-71XX Fittings
C-6410 Rail = C-74XX Fittings
C-6510 Rail = C-75XX Fittings
C-6610 Rail = C-76XX Fittings
C-6719 Rail = C-77XX Fittings
C-7110 C-7410
C-7510 C-7610
C-7710
Starting Easing
with Newel Cap
C-7130 C-7430
C-7530 C-7630
C-7730
Left Hand Volute
C-7135 C-7435
C-7535 C-7635
C-7735
Right Hand Volute
2 5/8"
4 7/8" Center of
Rail to Center of
Newel Cap
5 1/2" Center of
Rail to Center
of Newel Cap
3"
2 5/8"
MARION
C-6719
C-7140 C-7440 C-7145 C-7445
C-7540 C-7640 C-7545 C-7645
C-7740
C-7745
Left Hand
Right Hand
Turnout
Turnout
C-7133 C-7633
C-7138 C-7638
Left Hand Volute
Right Hand Volute
Ascending
Ascending
Recommended Starting Step — C-8030/C-8050
TRANSITION FITTINGS
C-7609
Returned
End
C-7111 C-7411
C-7511 C-7611
C-7711
Level
Quarterturn 90°
C-7112S C-7412S
C-7512S C-7612S
C-7712S
Up Easing
C-7113 C-7413
C-7513 C-7613
C-7713
Over Easing
C-7114S C-7414S
C-7514S C-7614S
C-7714S
Up Easing 90˚
C-7119 C-7419
C-7519 C-7619
C-7719
Opening Cap
C-7120 C-7420
C-7520 C-7620
C-7720
Tandem Cap
C-7121 C-7421
C-7521 C-7621
C-7721
Quarterturn
Cap 90°
C-7122 C-7422
C-7522 C-7622
C-7722
Level Cap 45°
C-7147 C-7447
C-7547 C-7747
5" Center to Center
Left or Right (LH shown)
GOOSENECK FITTINGS
C-7181 C-7481 C-7186 C-7486
C-7161 C-7461 C-7166 C-7466
C-7150 C-7450 C-7155 C-7455
C-7197 C-7497
C-7581 C-7681 C-7586 C-7686
C-7561 C-7761 C-7566 C-7766
C-7550 C-7750 C-7555 C-7755
C-7597 C-7797
C-7781
C-7786
Left Hand
Right Hand
Left Hand
Right Hand
2 Riser
Left Hand
Right Hand
2 Riser With Cap 45°
2 Riser No Cap 90°
With Cap
C-7160 C-7460 C-7165 C-7465
C-7189 C-7489
C-7199 C-7499
C-7171 C-7471 C-7176 C-7476
2 Riser With Cap 90°
C-7560 C-7760 C-7565 C-7765
C-7589 C-7689
C-7599 C-7699
C-7571 C-7671 C-7576 C-7676
Left Hand
Right Hand
C-7789
C-7799
C-7771
C-7776
2 Riser With
2 Riser
2 Riser With Cap 90°
Left Hand
Right Hand
Tandem Cap
No Cap
2 Riser No Cap 90°
ART DECO
4 7/8" Center
of Rail to
Center of
Newel Cap
1 7/8"
2 7/8"
C-7811
Level
Quarterturn 90°
C-7840
Left Hand
Turnout
C-7812S
Up Easing
2 3/8"
ART DECO
C-6810
C-7810
Starting Easing
C-7819
Opening Cap
COFFMAN STAIR PARTS • SINCE 1874
C-7831
Vertical Volute
C-7845
Right Hand
Turnout
C-7850
C-7855
Left Hand Right Hand
2 Riser No Cap 90°
C-7871
C-7876
Left Hand Right Hand
2 Riser No Cap 90°
C-7899
2 Riser
No Cap
NOTE: Placement of Art Deco newels on intermediate landings
and balconies will sometimes differ from standard newel locations,
because of the contemporary styling of the Art Deco fittings.
25
HARDWOOD STARTING STEPS
Check local building code requirements before specifying any starting step.
Starting steps are shipped complete with the starting riser, starting
tread, and all cove and shoe moulding.
Starting risers are available in a selection of hardwood species or paintgrade poplar.
Separate Cove Moulding Sets and Shoe Moulding Sets are available in
all starting step profiles. Example: C-8010 Cove and C-8010 Shoe.
NOTE: Please specify right or left hand when ordering single end
starting steps. Reversible starting steps are available as an option.
When measuring for finished stair width on double end starting steps,
include all finish materials. Example: Sheetrock, skirtboard, decorative
tread brackets, etc.
1 1/4"
48"
1 1/32"
10 3/8"
6 1/4"
Specify finished
stair width
10 1/4"
Usable with all
turnouts and volutes.
C-8025
C-8015
Order Item
1 1/4" 10 3/8"
C-8016-48
C-8016-53
C-8016-58
For finished
stair width of
43" to 48"
48" to 53"
53" to 58"
Usable with all
turnouts and volutes.
Three adjustable sizes
allow job site trimming
for exact finished fit.
10 3/8"
6 1/4"
6 1/4"
Order Item
10 3/8"
48"
11 1/4"
1 1/32"
7"
48"
C-8060
1 1/32"
7"
48"
11"
8 7/8"
8 7/8"
C-8050
26
1 1/32"
Use with C-7133/C-7138
Ascending Volutes, and
usable with larger profile
volutes, ascending volutes,
PTP systems and box newels.
Specify finished
stair width
12"
5 1/4"
8 7/8"
8 7/8"
C-8650
12"
C-8630
Half Circle
C-8630
12"
48"
7"
8 7/8"
12 1/2"
11"
6 1/2"
12 1/4"
12"
5 1/4"
C-8030
Specify finished
stair width
7"
48"
C-8030
Half Circle
11"
Usable in stair designs
that require a flush
mounted step with
starting fittings.
C-8061
8 7/8"
11 1/4"
7"
7"
11 1/4"
11"
48"
6 1/2"
7"
C-8041
Quarter Circle
Specify finished
stair width
7"
48"
7"
C-8041
Usable in stair designs
that require a flush
mounted starting step.
7"
14"
7"
14"
C-8040
Quarter Circle
7"
7"
1 1/32"
7"
C-8040
7"
Usable with all
turnouts and volutes.
Three adjustable sizes
allow job site trimming
for exact finished fit.
10 3/8"
48"
7"
7"
C-8065-48
C-8065-53
C-8065-58
C-8065
Adjustable Bowed Starting Step
7"
Specify finished
stair width
For finished
stair width of
43" to 48"
48" to 53"
53" to 58"
16 1/2"
C-8016
Adjustable Double End Bullnose
11 1/4"
10 1/4"
Usable with all
turnouts and volutes.
6 1/4"
10 1/4"
C-8020
Scroll End
C-8020
10 3/8"
48"
7"
C-8010
Bullnose
Specify finished
stair width
1 1/32"
11 1/4"
C-8010
1 1/4" 10 3/8"
11 1/4"
10 1/4"
10 3/8"
6 1/4"
11 1/4"
48"
48"
7"
Usable with larger
profile volutes and
ascending volutes,
PTP systems and
box newels.
COFFMAN STAIR PARTS • SINCE 1874
HARDWOOD TREADS AND RISERS
The products in this section are
manufactured under highly controlled
standards for beauty that will last a
lifetime. All are manufactured without
the use of finger-joints, excluding landing
tread, which is offered both solid and
finger-jointed.
Treads and risers are available in standard
lengths of 36", 42", 48", 54", 60" and 72".
C-8070
Tread
No Return
3/4" and 1-1/32" x 10-1/2" and 11-1/2"
C-8070 MR
Coped Return Tread
3/4" and 1-1/32" x 10-1/2" and 11-1/2"
3/4"
7 1/2 - 8"
C-8470
Platform
1-1/32" x 36", 42" and 48"
C-8370
Three Piece Winder Tread
1-1/32" x 36", 42" and 48"
(RH shown)
C-8270
Two Piece Winder Tread
1-1/32" x 36", 42" and 48"
(RH shown)
C-8075
Riser
3/4" x 7-1/2" and 8"
3 1/2"
1/4"
1 1/32"
1 1/4"
C-8090
Landing Tread
3-1/2" Wide
LINEAL SKIRTBOARD
S4S edge-glued and
finger-jointed.
C-6974 – 3/4" x 9-1/4"
C-6975 – 3/4" x 11-1/4"
19/64"
1/4" 3/4"
13/64"
2 1/4"
C-8090 - 3-1/2" Wide
C-8590 - 5-1/4" Wide
C-8590
Landing Tread
5-1/4 " Wide
11 3/4" or 12 3/4"
13"
1 27/32"
1 1/32"
1 1/32"
5/8"
1 1/32"
and 3/4"
3/4"
C-8085
Shoe Mould
1/2" x 3/4"
1/2"
C-8080-13
13" Return Nosing
1-1/4" x 1-1/32"
C-8095 13/16"
Cove Mould
13/16" x 5/8"
1 1/4"
C-8080
C-8080-12 MR
1 1/4"
Nosing 1 1/4"
C-8080-13 MR
1-1/4" x 1-1/32" and 3/4"
Coped Return Nosing
Lineal Stock
1-1/4" x 1-1/32" x 11-3/4" and 12-3/4"
1 1/4"
C-8081
Nosing and Cove
1-1/4" x 1-27/32"
Lineal Stock
TREAD AND RISER CAPS
6"
1 1/32"
11 1/4"
6"
1/2"
4 3/4"
1 1/32"
10 3/8"
11 1/4"
1/2"
4 3/4"
10 3/8"
8"
8"
7"
7"
C-8911
Reversible Starting End Cap
7 1/4"
6"
C-8011
Starting End Cap
Left or Right (RH shown)
C-8976
6" x 8"
Riser Cap
6"
4 3/4"
6"
13 1/2"
C-8971
6" x 11"
Reversible Tread Cap with
Mitered Return Nosing and Cove
1/2"
12 1/4"
C-8972
6" x 11"
Tread Cap with
Nosing and Cove
COFFMAN STAIR PARTS • SINCE 1874
C-8076
4-3/4" x 8"
Riser Cap
1/2"
4 3/4"
16"
C-8071
4-3/4" x 11-1/2"
Tread Cap with
Mitered Return Nosing and Cove
Left or Right (RH shown)
1/2"
12 3/4"
C-8072
4-3/4" x 11-1/2"
Tread Cap with
Nosing and Cove
27
BOX NEWELS
2 1/16"
2 1/16"
5 1/4"
2 1/16"
5 1/4"
2 1/16"
2 13/16 "
2 13/16 "
6 1/4"
6 1/4"
3"
3"
20 3/8"
20 3/8"
20 3/8"
20 3/8"
2 5/8 "
2 5/8 "
Coffman Box Newels offer
the flexibility to be
combined with any of
Coffman’s standard rail and
baluster profiles. The
C-4096 is shown above
with Coffman’s Bristol
family: C-6110 Rail,
C-7111 Level Quarterturn
Fitting, C-7112S Upeasing,
and C-5151F Fluted Baluster.
To aid in secure
installations,
Coffman box
newels are shipped
with a removable,
solid-wood
Box Newel
Installation Block.
63 7/8"
56"
2 3/8"
63 7/8"
56"
2 3/8"
21 15/16"
4 1/2"
C-4691
Recessed Panel
4 1/2" Sq.
7 1/2"
C-4891
Recessed Panel
6" Top Sq.
7 1/2" Bottom Sq.
30 3/4"
21 15/16"
30 3/4"
4 1/2"
C-4692
True Raised Panel
4 1/2" Sq.
7 1/2"
C-4892
True Raised Panel
6" Top Sq.
7 1/2" Bottom Sq.
2 3/16"
2 1/16"
2 3/16"
2 1/16"
6 1/4"
6 1/4"
3"
3"
5 1/4"
2 13/16 "
20 3/8"
61 11/16"
20 3/8"
20 3/8"
2 5/8 "
56"
63 7/8"
56"
63 7/8"
3 1/2"
2 3/8"
2 3/8 "
23"
5"
C-4099
Newel Sleeve - 3-1/2"
(Moulding Included Loose)
28
21 13/16"
7 1/2"
C-4890
Mission
6" Top Sq.
7 1/2" Bottom Sq.
21 15/16"
4 1/2"
C-4690
Mission
4 1/2" Sq.
7 1/2"
C-4097
Raised Panel
6" Top Sq.
7 1/2" Bottom Sq.
30 3/4"
4 1/2"
C-4697
Raised Panel
4 1/2" Sq.
COFFMAN STAIR PARTS • SINCE 1874
BOX NEWELS
3 5/8"
2 1/16"
5 1/4"
2 1/16"
2 13/16"
6 1/4"
3 5/8"
3 5/8"
5"
5"
23 1/8"
23 1/8"
3"
20 3/8"
20 3/8"
2 5/8 "
65"
55"
63 7/8"
56"
61 3/8"
55"
2 3/8"
23 1/4"
30 3/4"
21 15/16"
6 1/4"
C-4091
Plain
4 3/4" Top Sq.
6 1/4" Bottom Sq.
4 1/2"
C-4696
Flute
4 1/2" Sq.
7 1/2"
C-4096
Flute
6" Top Sq.
7 1/2" Bottom Sq.
23 1/4"
3 1/2"
C-4075
Landing
3 1/2" Sq.
6 1/4"
C-4092
Flute
4 3/4" Top Sq.
6 1/4" Bottom Sq.
2 1/16"
2 1/16"
5 1/4"
2 1/16"
2 1/16"
6 1/4"
5 1/4"
25 13/16"
23 7/16"
25 3/4"
61 3/4"
53 3/4"
56"
63 7/8"
63 7/8"
21 15/16"
7 1/2"
C-4095
Plain
6" Top Sq.
7 1/2" Bottom Sq.
23"
6 1/4"
C-4090
Plain
4 3/4" Top Sq.
6 1/4" Bottom Sq.
COFFMAN STAIR PARTS • SINCE 1874
30 3/4"
4 1/2"
C-4695
Plain
4 1/2" Sq.
3 1/2"
C-4077
Landing
3 1/2" Sq.
29
C-2852 — 3/4" Hollow Core LITE-IRON™ Baluster
FORGED LITE-IRON
Forged Finishes
(F) POWDER COAT
(M) MATTE BLACK
(A) ANTIQUE BRONZE
(S) SATIN BLACK,
(C) OIL RUBBED COPPER
(N) ANTIQUE NICKEL
For viewing the finishes in color
and for product detail,
refer to Coffman’s Forged Iron
Brochure C-254.
We have lightened the load
by making it hollow.
Check our our LITE-IRON™ series, the
newest addition to the Forged Iron
Collection. The LITE-IRON™ hollow core
reduces weight while maintaining strength
and is available in our BOLD 3/4".
Spectacular Results...
Faster Installations!
Structural tests to ICC standards, performed by an
independent university testing facility, proving the
integrity of our new LITE-IRON™ series are available
upon request.
2 3/4"
C-2390
C-2392
3/4" Rake Collar
with Set Screw
3/4" Base Collar
with Set Screw
F, M, A, S, C
F, M, A, S, C
5 1/2"
2 3/4"
5 3/4"
18"
18"
6"
18"
18"
18"
3 7/8"
4 3/4"
3"
3 1/4"
3 7/8"
8"
3 7/8"
6"
4 3/4"
6"
LIGHTER-BOLDER
23"
16 3/4"
17 3/8"
13 3/4"
44"
18"
44"
44"
44"
44"
3/4"
C-2850
F, M, A, S, C
30
3/4"
C-2851
F, M, A, S, C
3/4"
C-2852
F, M, A, S, C
44"
3/4"
C-2853
F, M, A, S, C
3/4"
C-2855
F, M, A, S, C
3/4"
C-2885
F, M, A, S, C
COFFMAN STAIR PARTS • SINCE 1874
FORGED COLLECTION
Collar Options 1/2"
C-2302
C-2301
C-2340
Base Collar
Inside Opening 1/2"
F, M, A, S, C, N
C-2342
Base Collar
with Set Screw
Inside Opening 1/2"
C-2345
Adjustable Collar
with Set Screw
Inside Opening 1/2"
C-2350
Rake Collar 38°
with Set Screw
Inside Opening 1/2"
F, M, A, S, C, N
F, M, A, S, C, N
F, M, A, S, C, N
C-2351
Rake Collar 38°
with Set Screw
Inside Opening 5/8"
F, M, A, S, C, N
F, M, A, S, C, N
4"
F, M, A, S, C, N
C-2303
FORGED TOUCH-UP KIT
Available in six speciality
finishes. Powder Coat (F),
Antique Bronze (A),
Oil Rubbed Copper (C), and
Antique Nickel (N) consist of
two touch-up paint markers.
Matte Black (M) and Satin
Black (S) contain a single
paint marker.
Collar Options 5/8"
C-2341
Base Collar
Inside Opening 5/8"
C-2360
NEWEL ATTACHING SYSTEM
Base Collar, Shaft and Screws
C-2308
FORGED TOUCH-UP KIT
13/16"
2 1/2"
C-3601
Heavy Duty
Wall Rail Bracket
EPOXY GLUE SYSTEM
C-2302 Manual Dispenser
C-2301 Adhesive (Approximately
20 balusters per tube.
Open work time – 25 minutes.)
C-2303 Mixing Nozzle (Packed 10 ea.)
F, M, A, S, C, N
Baluster top pins have 1/2" diameters. (Exception: Medallion and Belly Balusters)
F, M, A, S, C, N
2 1/4"
5 1/2"
7"
2 1/4"
5 1/4"
5 3/4"
18 1/4"
18 1/4"
3 3/4"
7"
18"
6"
18"
18"
2 1/2"
18"
18"
18"
3 7/8"
6 1/2"
5 3/4"
4 3/4"
2 1/2"
3 1/4"
3"
3 7/8"
8"
3 7/8"
7"
6"
4 3/4"
12"
6"
24 1/4"
17 1/4"
16 3/4"
23"
48"
1 3/16"
1/2"
1/2"
C-2452
Newel
F, M, A, S, C, N
44"
44"
1 3/16"
1/2"
1/2"
1/2"
1/2"
1/2"
C-2555
C-2580
C-2585
F, M, A,
S, C, N
F, M, A,
S, C, N
F, M, A,
S, C, N
C-2550
C-2551
C-2552
C-2553
F, M, A,
S, C, N
F, M, A,
S, C, N
F, M, A,
S, C, N
F, M, A,
S, C, N
Check local
building codes.
6"
6"
1 11/16"
2 3/4"
1 11/16"
7 5/8"
8 7/8"
18"
18"
*All balusters
9 7/8"
18"
18"
with spoon
designs are
shown in
Front View
drawings.
Side profile
will be similar
to drawing below.
18"
4"
5 1/2"
6"
1 5/8"
4"
3 5/8"
5"
4 1/4"
12 3/4"
6 1/2"
6"
1 5/8"
6"
5 1/2"
5 1/2"
4"
21"
6"
20"
16 7/8"
44"
44"
44"
F, M, A, S, C, N
18"
18"
14"
44"
48"
C-2450
Newel
17 3/8"
13 3/4"
44"
44"
16 7/8"
44"
15 5/8"
44"
44"
44"
44"
44"
44"
17 7/8"
13 1/2"
Front
View
1/2"
1/2"
1/2"
1/2"
5/8"
C-2560
C-2561
C-2562
C-2563
C-2570
F, M, A,
S, C, N
F, M, A,
S, C, N
F, M, A,
S, C, N
F, M, A,
S, C, N
Front View*
COFFMAN STAIR PARTS • SINCE 1874
F, M, A,
S, C, N
5/8"
5/8"
C-2571
C-2572
C-2575
Front View*
Front View*
F, M, A,
S, C, N
5/8"
F, M, A,
S, C, N
F, M, A,
S, C, N
Side
View
31
FORGED COLLECTION
Collar Options 1/2"
Collar Options 5/8"
C-2910
C-2911
C-2912
C-2914
F, M, A, S, C, N
F, M, A, S
F, M
F, M, A, S, C, N
C-2915
with Set Screw
F, M, A, S, C, N
Forged Finishes
Collar Options
Collar Options 9/16"
(F) POWDER COAT
(M) MATTE BLACK
(A) ANTIQUE BRONZE
(S) SATIN BLACK,
(C) OIL RUBBED COPPER
(N) ANTIQUE NICKEL
Fits both 1/2" and 5/8" Forged Balusters.
The plastic insert holds collar out of the
way during epoxy installation and the base
makes for perfect alignment.
For viewing the finishes in color
and for product detail,
refer to Coffman’s Forged Iron
Brochure C-254.
C-2916
M
C-2917
with Set Screw
C-2918
with Set Screw
M
M
Job-Lot Epoxy Adhesive System
C-2919
C-2929
F, M, A, S, C, N
F, M, A, S, C, N
3"
2 1/4"
C-2905
Adhesive Kit
5 oz. Adhesive
Cartridge and
Nozzle to be
used in standard caulking gun.
(Approximately 50 balusters per tube.
Open work time – 6 minutes.)
18 1/4"
2 1/4"
6"
18 1/4"
5 1/2"
18"
C-2906
Extra Nozzle for C-2905
18"
4 1/8"
6"
6 3/4"
4 3/4"
3 7/8"
4 3/4"
Medallions for use in Medallion Balusters
23 1/4"
24"
23 5/8"
48"
17 3/8"
48"
44"
44"
C-2920
C-2921
C-2922
M
M
M
C-2923
M
or C-2924 Brass Finish
The 4" Medallions above fit into the rings of the Medallion Balusters shown on page 33.
6"
1 3/16"
1/2"
1/2"
C-2942
Newel
C-2962
C-2963
Front View*
F, M, A,
S, C, N
F, M, A, S
2 1/4"
5 1/2"
1 3/16"
C-2940
Newel
F, M, A,
S, C, N
5 7/8"
5 7/8"
5 7/8"
4 7/8"
F, M, A,
S, C, N
*All balusters
18"
18"
6 1/2"
18"
7"
6"
18"
7"
3 1/2"
3 3/4"
4"
4 3/4"
9"
9"
11 1/2"
11 1/2"
9"
3 1/2"
25 1/2"
7"
7"
44"
44"
19 1/2"
44"
11 5/8"
11"
40"
13 1/2"
13"
2 3/8"
3"
23 5/8"
44"
40"
40"
44"
5 1/2"
5 1/2"
5 1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
1/2"
1/2"
1/2"
C-2995
C-2996
C-2997
C-2998
C-2999
C-2986
C-2987
C-2988
F, M, A,
S, C, N
Front View*
Front View*
Front View*
Front View*
32
F, M, A,
S, C, N
F, M, A,
S, C, N
with spoon
designs are
shown in
Front View
drawings.
Side profile
will be similar
to drawing below.
F, M, A,
S, C, N
F, M, A,
S, C, N
Front
View
Side
View
F, M, A, S, C
F, M, A, S, C
F, M, A, S, C
Belly Balusters have 1/2" Square Tops. C-2987 and C-2988 will
match the C-2550 through C-2553 series.
COFFMAN STAIR PARTS • SINCE 1874
FORGED COLLECTION
Medallions for Balusters below are shown on Page 32. Tops are 1/2" Square.
6"
4"
4"
2 1/4"
2 1/4"
2 1/4"
2 3/4"
2 1/4"
6"
6"
5 3/4"
9 7/8"
5"
18"
18"
6"
18"
18"
5 1/2"
18"
18"
18"
18"
6"
4 1/8"
3 7/8"
13"
7"
4 1/4"
3 7/8"
3 7/8"
4 3/4"
4 3/4"
3 7/8"
6 1/4"
4"
17 3/8"
13 3/4"
17 3/4"
22"
17 3/8"
23 5/8"
44"
44"
M
C-2933
C-2932
C-2931
C-2930
Installation
hardware
included
M
M
1/2"
1/2"
1/2"
1/2"
5/8"
C-2952
Brass Basket
C-2953
Brass Baskets
C-2954
Brass Basket
C-2955
Brass Baskets
C-2957
Brass Basket
M
M
M
M
Front View*
1/2"
1/2"
1/2"
M
M
7"
7"
*All balusters
4 3/4"
18"
18"
18"
18"
7"
18"
with spoon
designs are
shown in
Front View
drawings.
Side profile
will be similar
to drawing below.
18"
3 1/4"
15"
6"
6"
44"
17 7/8"
44"
44"
44"
40"
44"
44"
1/2"
6"
6"
15"
24"
4 3/4"
4 3/4"
2"
2"
6 1/2"
6 1/2"
6 1/4"
6"
3 1/4"
7"
6 3/4"
44"
44"
44"
20"
9/16" Round
9/16" Round
C-2970
M
44"
12 3/4"
44"
44"
19 1/2"
9/16" Round
7"
7"
9/16" Round
44"
12 3/4"
13"
9/16" Round
9/16" Round
C-2971
C-2972
C-2973
C-2974
C-2975
C-2976
Front View*
Front View*
Front View*
Front View*
Front View*
7"
M
7"
5"
18"
M
M
M
1 1/2"
5"
18"
18"
M
1 1/2"
7"
18"
18"
18"
18"
15"
1"
7 1/2"
12"
12"
12"
Side
View
Check local building
codes when using
7" balusters.
9/16" Round
Front View*
M
Front
View
12 3/4"
8"
12"
2"
6"
14"
14"
14"
25"
14"
16 1/2"
44"
44"
5/8"
44"
44"
44"
44"
5/8"
1/2"
5/8"
5/8"
C-2981
C-2982
C-2983
C-2984
C-2990
C-2991
M
M, A, S, C, N
M
M
F, M, A,
S, C, N
F, M, A,
S, C, N
COFFMAN STAIR PARTS • SINCE 1874
5/8"
44"
12"
44"
1/2"
1/2"
C-2960
C-2968
M, S
F, M, A,
S, C, N
33
THE ADJUSTABLE STAIR RAIL SYSTEM
THAT WE HAVE PUT TOGETHER...
SO YOU DON’T HAVE TO.
Exclusively from Coffman, preassembled and adjustable
balustrade systems available with either Pin Top balusters
(Traditional) or Square Top balusters (Mt. Vernon
and Franciscan).
• Assembled Handrail, Balusters, and Base.
• Both stair units and balcony units designed to meet
4" sphere codes.
Wonderail is
patented with new
patents pending.
TRADITIONAL
AVAILABLE UNFINISHED AND PREFINISHED
• Available unfinished in Red Oak w/ Oak or Primed Balusters.
• Also available PREFINISHED (Red Oak w/ Oak or White Balusters)
in a beautiful natural finish and three Minwax® colors:
Golden Oak, Early American and Provincial.
• Fillet pieces are cut at one end and ready for the final angle cut.
• Stair units are adjustable from a slope of
32° – 45°. Balcony units are fixed.
4"
2 1/4"
13"
2 3/8"
4"
4"
4"
5"
5"
5"
1 1/2"
23"
23"
C-6010
23"
68"
23"
25 1/2"
48"
54"
54"
36"
28"
16"
8"
Available with a
shoe rail base for
use on both open
and closed stairs.
C-1034
Shoe Base
Available in a 7-1/4" wide cap
board base for use on closed
stairs.
C-1044 Cap Base
STAIR UNIT, HEIGHT 34"
ITEM NO.
SPECIFY BALUSTER
LENGTH
C-1034
C-1034
C-1034
C-1034
C-1034
C-1034
C-1034
OAK or PRIMED
OAK or PRIMED
OAK or PRIMED
OAK or PRIMED
OAK or PRIMED
OAK or PRIMED
OAK or PRIMED
4'
6'
8'
10'
12'
14'
16'
C-1044
OAK or PRIMED
4'
C-1044
OAK or PRIMED
6'
C-1044
OAK or PRIMED
8'
C-1044
OAK or PRIMED
10'
C-1044
OAK or PRIMED
12'
C-1044
OAK or PRIMED
14'
C-1044
OAK or PRIMED
16'
NOTE: 34" units for rake applications only.
34
22"
22"
10 1/2"
1 1/4"
3"
3"
C-5015
1 1/4" Sq.
C-4540BT
3" Sq.
C-4542BT
3" Sq.
3"
BALCONY UNIT, HEIGHT 38"
ITEM NO.
SPECIFY BALUSTER
3"
C-4547BT C-4542BT PREP
3" Sq.
3" Sq.
LENGTH
*
newel
*isPrepped
half-notched,
predrilled, and
shipped complete
with lag bolts,
washers, and
1" plugs. (For use
with C-1044 Cap
Base ONLY)
C-1038
OAK or PRIMED
4'
C-1038
OAK or PRIMED
6'
C-1038
OAK or PRIMED
8'
NOTE: 38" units for balcony applications only.
Balcony units are manufactured with shoe base only.
NEWEL POSTS AND ACCESSORIES
ITEM NO.
C-4540BT
C-4542BT
C-4542BT-PREP
C-4547BT
C-4542BT-1/2
C-3505-30
C-3000
C-3010
C-3015
C-3020
C-7337
SPECIE
OAK
OAK
OAK
OAK
OAK
OAK
OAK
OAK
OAK
OAK
OAK
DESCRIPTION
Starting Newel
Starting Newel
Prepped Starting Newel
Landing Newel
Half Newel
L-Bracket Post Fastener
Flush Mount Plug 1"
Flush Mount Plug 1/2"
Button Plug 1/2"
Button Plug 1"
Rosette
COFFMAN STAIR PARTS • SINCE 1874
MT. VERNON
• Available unfinished in Red Oak only.
• Fillet included, uncut, and loose.
• Adjustable from a slope of 32° – 41°.
2 5/8"
3"
STAIR UNIT, HEIGHT 34"
ITEM NO.
SPECIE
5 3/4"
3/16"
LENGTH
1 3/4 "
2 5/8"
17 1/2"
C-1234
OAK
3'
36"
C-1234
OAK
4'
C-1234
OAK
6'
12 3/4"
C-1234
OAK
8'
C-1234
OAK
10'
1 3/4"
C-1234
OAK
12' C-5005
C-1234
OAK
14' 1 3/4" Sq.
NOTE: 34" units for rake applications only.
C-6719 P1
4 13/16"
13"
7 3/16"
2 7/8"
2 7/8"
10 15/16"
10 15/16"
59 1/2"
56"
5 11/16"
5 11/16"
BALCONY UNIT, HEIGHT 38"
ITEM NO
SPECIE
LENGTH
C-1238
OAK
4'
C-1238
OAK
6'
C-1238
OAK
8'
NOTE: 38" units for balcony applications only.
NEWEL POSTS AND ACCESSORIES
4 13/16"
24 1/2"
22 3/16"
3 1/2"
3 1/2"
C-4242
3 1/2" Sq.
C-4245
3 1/2" Sq.
ITEM NO.
DESCRIPTION
C-4242 OAK
C-4245 OAK
C-4242-1/2 OAK
C-3505-35 OAK
C-3000 OAK
C-3010 OAK
C-3015 OAK
C-3020 OAK
C-7337 OAK
Starting Newel
Landing Newel
Half Newel
L-Bracket Post Fastener
Flush Mount Plug 1"
Flush Mount Plug 1/2"
Button Plug 1/2"
Button Plug 1"
Rosette
FRANCISCAN
• Available unfinished in Red Oak or Beech.
• Fillet Included, Uncut and Loose.
• Adjustable from a slope of 32° – 41°.
2 17/32"
2 5/16"
STAIR UNIT, HEIGHT 34"
ITEM NO.
SPECIFY
LENGTH
5 3/4"
1 1/4"
C-6005
17 1/2"
C-1134 OAK or BEECH 3'
3
C-1134 OAK or BEECH 4'
12 3/4"
C-1134 OAK or BEECH 6'
C-1134 OAK or BEECH 8'
1 1/4"
C-1134 OAK or BEECH 10'
C-5105
C-1134 OAK or BEECH 12'
1 1/4" Sq.
C-1134 OAK or BEECH 14'
NOTE: 34" units for rake applications only.
3 1/2"
3 1/2"
16"
9 1/2"
SPECIFY
COFFMAN STAIR PARTS • SINCE 1874
17 1/2"
59 1/2"
56"
LENGTH
C-1138 OAK or BEECH 4'
C-1138 OAK or BEECH 6'
C-1138 OAK or BEECH 8'
NOTE: 38" units for balcony applications only.
ITEM NO.
17 1/2"
BALCONY UNIT, HEIGHT 38"
ITEM NO.
NEWEL POSTS AND ACCESSORIES
22 1/2"
25 1/2"
3 1/2"
3 1/2"
C-4002
3 1/2" Sq.
C-4003
3 1/2" Sq.
C-4002
C-4003
C-4002-1/2
C-3505-35
C-3000
C-3010
C-3015
C-3020
C-7317
SPECIFY
OAK or BEECH
OAK or BEECH
OAK or BEECH
OAK or BEECH
OAK
OAK
OAK
OAK
OAK or BEECH
DESCRIPTION
Starting Newel
Landing Newel
Half Newel
L-Bracket Post Fastener
Flush Mount Plug 1"
Flush Mount Plug 1/2"
Button Plug 1/2"
Button Plug 1"
Rosette
35
ACCESSORIES
C-3010
Flush Rail Plug
1/2" Diameter
C-3000
C-3015
Flush Rail Plug Button Plug
1" Diameter
1/2" Diameter
1/4"
3/8"
C-3001
3-1/2" Rail Bolt
C-3020
Button Plug
1" Diameter
2"
1 3/4"
1 1/4"
3/8"
1/4"
1/4"
5/8"
5/8"
5/8"
C-3005
C-3004
C-3003
1-1/4" Clamp Nail 1-3/4" Clamp Nail 2" Clamp Nail
3/8"
10 3/4"
5"
1"
5 1/2"
4 1/2"
3/4"
3/8"
1/2"
C-3284
Thread Lock
C-3201
Baluster Fastener
Drill Driver Kit
Includes — 4 Baluster Fasteners
Hardwood
Hemlock
C-3505-30 — 3"
C-3505-325-H — 3-1/4"
C-3505-35 — 3-1/2" C-3505-4375-H — 4-3/8"
L-Bracket Post Fastener
C-3009
C-3008
Newel Anchoring
Sure Tite
Hardware
Newel Fastening System
Includes - Lag Bolt, Washer,
Nut and 1-1/2" Plugs
C-3203 — 50 Pack
C-3203-B — 100 Bulk Pack
2-1/2" Baluster Fasteners
C-3101
Zipbolt UT Rail Bolt
C-3102
Zipbolt Angled Rail Bolt
Ratchet Driver shown with
Hex Driver installed
(not included).
C-3301
Rail & Post Fastener
Includes Fastener, Washer,
Nut and Plugs
C-3901
Rail Bolt Wrench
C-3302
Rail Bolt Fastener
Includes Fastener, Washer,
Nut and Plugs
3"
3"
1"
C-3103
Ratchet Driver
2 1/2"
C-3283
Key Lock
2" x 2-5/8" x 3/8"
C-3104
Hex Driver — 5mm (3/pack)
2 1/4"
2 5/8"
C-3601A – Antique Brass
C-3601B – Bright Brass
Heavy Duty Wall Rail Bracket
C-3002
Wall Rail Bracket
C-3105
Allen Wrench-5mm (3/pack)
• Faster, Easier, Gear Driven Rail Bolt Means No Nut To Start
• Tighten Joints Securely With A Driver Or Allen Wrench
• Options Include Angled Rail Bolt For Post-To-Post Rail Connections
C-3501
Newel Plate Fastener
4-5/8" x 4-5/8"
Includes Plate and
13, 3" Fastening Screws
12 1/4"
C-3287
Mini Lock
1-1/4" Diameter
C-3286
Dowel Lock
Includes – 6, 2-1/4" Baluster Screws
and 1, 3-1/2" Newel Post Screw
12 1/4"
3"
2 3/4"
8 1/8"
C-8028
C-8028V (Veneered)
Tread Bracket
1/4" Thick
C-8029
C-8029V (Veneered)
Tread Bracket
1/4" Thick
1 1/2"
3"
3"
8 1/8"
C-3099
Miter Jig
The fastest, easiest and most accurate
way to mark and cut fittings.
C-4200
Newel Drop
use with
3-1/2" Newel Post
C-4000
Newel Drop
use with
3" Newel Post
1 1/2"
HARDWOOD
5 3/8"
6 3/16"
5 3/8"
5 1/2"
4 5/8"
5 1/2"
4 3/8"
4 3/8"
3 3/8"
4 1/2"
3 1/2"
3 3/4"
3/4"
3 5/16"
3 1/8"
3/4"
3/4"
3/4"
3/4"
5 3/8"
4 5/8"
4 5/16"
4"
4 3/16"
C-7217
Rosette
C-7317
Rosette
C-7237
Rosette
C-7337
Rosette
C-7318
Rosette
HARDWOOD
36
13/16"
7317-H
Round
Rosette
3/4"
3 1/8"
4 1/4"
3/4"
7337-H
Oval
Rosette
SOFTWOOD
COFFMAN STAIR PARTS • SINCE 1874
HEMLOCK PROFILE INDEX
NEWELS
NEWELS
OVER-THE-POST
POST-TO-POST
4010PT-H 4014-H 4065-H
Page 38 Page 38 Page 38
2
2
4004-H 4011F-H 4040-H 4040BT-H 4040F-H 4040S-H 4070-H 4500-H 4740-H
Page 41 Page 38 Page 38,40 Page 40 Page 40 Page 40 Page 37 Page 41 Page 37
4810-H
Page 37
4814-H
Page 37
Top
View
Top
View
4840-H
Page 37
Top
View
9
BALUSTERS
BALUSTERS
PIN TOP
SQUARE TOP
5015-H 5015F-H 5040-H 5315-H 5610-H 5611-H
Page 38 Page 38 Page 38 Page 38 Page 38 Page 38
5005-H 5060EE-H 5060-H 5067-H 5070-H 5105-H 5260EE-H 5360-H
Page 41 Page 40 Page 40 Page 40 Page 40 Page 40 Page 41 Page 41
2
2
RAILS
5361-H
Page 41
5800-H
Page 37
2
1
1
6005-H
2-1/4w X 2-3/8h
Page 37, 41
6010-H
1-5/8w X 2-3/8h
Page 38, 39
6210-H
2-1/4w X 2-3/8h
Page 38
6019-H
2-1/2w X 2-3/4h
Page 37, 41
6910S-H
1-5/8w X 1-7/8h
Page 39
6244-H
2-1/2w X 1-1/4h
Page 37, 41
6344-H
3-1/4w X 1-1/4h
Page 41
6042-H
2-1/4w X 1-1/4h
Page 41
TRADITIONAL HEMLOCK
2 1/2"
2 1/2"
2 1/4"
1 5/8"
1/4"
1 1/4"
2 3/4"
2 3/8"
1/4"
1/4"
1/4"
1 5/8"
1 5/8"
6005-H
with Fillet
6019-H
with Fillet
1 5/8"
2 1/2"
6244-H
with Fillet
6206-H
Shoe Rail
with Fillet
7/16"
1/4"
1 1/8"
1 5/8"
1 5/8"
6207-H
Fillet
6208-H
Fillet
6"
3 5/8"
5"
6 1/2"
5"
10 3/8"
3 5/8"
10 3/4"
5"
5 3/8"
10 3/4"
8 3/4"
48"
14 1/2"
8 3/4"
1 5/8"
22 5/16"
47 1/2"
42"
1 5/8"
54"
59"
53"
47"
14 1/2"
47"
59 1/2"
52 1/2"
47"
59"
41"
40 1/2"
47"
26 1/2"
16 3/16"
10 3/4"
42 "
59"
36"
32"
6 1/2"
59"
13"
14 1/2"
14 1/2"
6"
14 1/2"
10 3/4"
14 1/2"
5"
13"
17 3/8"
16 3/4"
1 5/8"
28 1/8"
14 1/2"
22 3/4"
1 5/8"
5800-H 5800-H
5800-H 5800-H
1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq.
3 1/4"
3 1/4"
3 1/4"
3 1/4"
4740-H
3 1/4" Sq.
4745-H
3 1/4" Sq.
4840-H
3 1/4" Sq.
4843-H
3 1/4" Sq.
COFFMAN STAIR PARTS • SINCE 1874
3 1/4"
3 1/4"
4070-H 4073-H
3 1/4" Sq. 3 1/4" Sq.
3 1/4"
3 1/4"
4 3/8"
4814-H
4810-H 4813-H
3 1/4" Sq. 3 1/4" Sq. 4 3/8" Sq.
SOFTWOOD SECTION
4 3/8"
4817-H
4 3/8" Sq.
37
GEORGIAN HEMLOCK POST-TO-POST
Available in ball top - Specify BT.
2 7/8"
2 1/2"
1/4"
1 5/8"
2 3/8"
2 1/2"
10"
13"
23 1/2"
23 1/2"
5"
6207-H
Fillet
2 1/2"
8 1/4"
2 1/4"
5"
23 1/2"
8 1/4"
6210-H
59"
8 1/4"
23 1/2"
19 1/4"
8 1/4"
1 5/8"
2 1/2"
24"
28"
34"
59"
19 1/4"
1/4"
59"
47"
15 1/4"
1 1/8"
32"
2 1/2"
32"
19 1/4"
36"
36"
42"
48"
42"
8 1/2"
8 1/2"
1 5/8"
1 5/8"
8"
20 1/2"
14 1/2"
1 5/8"
1 5/8"
1 5/8"
5611-H
5611-H
5611-H
5611-H
1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq.
8"
23"
28"
16"
6206-H
Shoe Rail
with Fillet
20"
8"
1 5/8"
3 1/4"
3 1/4"
3 1/4"
1 5/8"
3 1/4"
4040-H 4043-H 4045-H 4046-H
3 1/4" Sq. 3 1/4" Sq. 3 1/4" Sq. 3 1/4" Sq.
5315-H 5315-H 5315-H
1 5/8" Sq. 1 5/8" Sq. 1 5/8" Sq.
GEORGIAN HEMLOCK OVER-THE-POST
/
11 1/4"
8 1/4"
2 3/8"
9 1/4"
9 1/4"
9 1/4"
1 5/8"
39"
36"
34"
31"
45"
42"
1/2"
1/4"
8"
8"
8"
8"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
5015-H
1 1/4" Sq.
5015-H
1 1/4" Sq.
5015-H
1 1/4" Sq.
1 1/4"
1 1/4"
5015-H
5015-H
1 1/4" Sq. 1 1/4" Sq.
20"
20"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
8"
8"
8"
8"
8"
1 1/4"
1 1/4"
39"
36"
34"
1 1/4"
1 1/4"
1"
28 1/2"
27"
48"
31"
42"
16"
1 1/4"
Newel
top
diameter
is 1".
1/4"
39"
14"
5015-F-H 5015-F-H 5015-F-H 5015-F-H 5015-F-H
1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
5015-H
1 1/4" Sq.
6016-H (7 piece)
Bending Rail
36"
11"
8"
8"
34"
31"
6010-H
48"
42"
6016-H (9 piece)
Bending Rail
1"
19 1/2"
20"
1/2"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
5040-H
5040-H
5040-H
5040-H
5040-H
1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia. 1 1/8" Dia.
3 1/4"
3 1/4"
4010 PT-H
3 1/4" Sq.
4011F-H
3 1/4" Sq.
1"
27"
2 3/8"
1"
1"
6015
Bending Mould
27"
1"
6"
6"
27"
6"
6"
6"
16 1/2"
19 1/2"
38
21 1/2"
34"
31"
8 1/2"
60"
30"
8 1/2"
21 1/2"
40"
37"
8 1/2"
21 1/2"
11 1/2"
82 1/2"
27"
48"
44"
44"
32"
54 1/2"
43"
13"
16"
20"
14 1/2"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
2 3/4"
3 1/4"
5610-H
1 1/4" Sq.
5610-H
1 1/4" Sq.
5610-H
1 1/4" Sq.
5610-H
1 1/4" Sq.
5610-H
1 1/4" Sq.
4065-H
2 3/4" Dia.
Adjustable
4014-H
3 1/4" Sq.
Adjustable
SOFTWOOD SECTION
3 1/4"
3 1/4"
4011-H
4015-H
3 1/4" Sq. 3 1/4" Sq.
3 1/4"
4018-H
3 1/4" Sq.
COFFMAN STAIR PARTS • SINCE 1874
STAFFORD HEMLOCK RAIL
1/2"
2 1/4"
2 1/4"
1/4"
1 1/4"
2"
1/4"
1 7/8"
1 7/8"
1 7/8"
1 1/8"
1 5/8"
1/4"
1/4"
1 1/4"
1 5/8"
6910S-H
6910PS-H
with Fillet
1/2"
2 1/2"
1 1/4"
6106-H
Shoe Rail
with Fillet
6107-H
Fillet
6916-H
Bending Rail
6915
Bending Mould
FITTINGS
2 1/4"
2 3/8"
1 5/8"
GEORGIAN
6010-H
The second digit of the fitting part
number must match the second
digit of the rail part number.
Example:
C-6010-H Rail = C-70XX Fittings
C-6910-H Rail = C-79XX Fittings
7009-H
Returned End
7010-H 7910-H
Starting Easing
With Cap
7011-H 7911-H
Level Quarterturn 90°
7021-H 7921-H
Quarterturn
Cap 90°
2 1/4"
1 7/8"
1 5/8"
STAFFORD
6910S-H
7012S-H 7912S-H
Up Easing
7013-H
Over Easing
7014S-H
Up Easing 90°
4 7/8" Center
of Rail to
Center of
Newel Cap
7030-H 7930-H
Left Hand
Volute
7060-H
7065-H
Left Hand Right Hand
2 Riser With Cap 90°
7071-H 7076-H
Left
Right
Hand
Hand
2 Riser No Cap 90°
COFFMAN STAIR PARTS • SINCE 1874
7019-H 7919-H
Opening Cap
7020-H 7920-H
Tandem Cap
7047-H
5" Center to Center
Left or Right (LH shown)
4 7/8" Center
of Rail to
Center of
Newel Cap
7035-H 7935-H
Right Hand
Volute
7081-H 7086-H
7981-H 7986-H
Left
Right
Hand
Hand
2 Riser With Cap 90°
7040-H 7940-H 7045-H 7945-H
Left Hand
Right Hand
Turnout
Turnout
7089-H 7989-H
2 Riser
With
Tandem Cap
7097-H 7997-H
2 Riser
With Cap
7099-H 7999-H
2 Riser
No Cap
SOFTWOOD SECTION
39
KENT HEMLOCK
6 3/8"
5 3/8"
2 1/4"
5 3/8"
5 3/8"
5 3/8"
2 3/8"
43"
40"
34"
31"
37"
18"
21"
24"
6 3/4"
6 3/4"
6 3/4"
1 1/4"
1 5/8"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
9 1/2"
1 1/4"
1 1/4"
5070-H 5070-H 5070-H 5070-H 5070-H
1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
5067-H 5067-H 5067-H 5067-H
5067-H
1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
1 1/4"
1 1/4"
42"
9 1/2"
9 1/2"
1 1/4"
1 1/4"
26 1/8"
39"
36"
9 1/2"
9 1/2"
9 1/2"
9 1/2"
24 1/8"
21 1/8"
34"
31"
1/4"
6010 P-H
with Fillet
19 1/8"
16 1/8"
24"
24"
1/4"
1 1/8"
2 1/2"
5 3/4"
6106-H
Shoe Rail
with Fillet
5 3/4"
5 3/4"
17 1/2"
1/4"
17 1/2"
1 1/4"
17 1/2"
6107-H
Fillet
37"
13 3/4"
10 3/4"
31"
43"
34"
34"
40"
37"
43"
19 3/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
5105-H
1 1/4" Sq.
5105-H
1 1/4" Sq.
5105-H
1 1/4" Sq.
5060-H
1 1/4" S4S
5060-H
1 1/4" S4S
5060-H
1 1/4" S4S
5060-H
1 1/4" S4S
5060-H
1 1/4" S4S
2 3/4"
10"
2 3/4"
Top View showing
Eased Edge.
5"
23"
23"
59 1/2"
47 1/2"
31"
36"
41"
23 3/4"
16 3/4"
1 1/4"
1 1/4"
1 1/4"
5060EE-H 5060EE-H 5060EE-H
1 1/4" Sq. 1 1/4" Sq. 1 1/4" Sq.
2 1/2"
2 1/2"
2 1/2"
10"
13"
5"
2 1/2"
3 1/4"
3 1/4"
4040F-H
3 1/4" Sq.
4045F-H
3 1/4" Sq.
2 1/2"
2 1/2"
10"
13"
5"
3 1/2"
59"
5"
18 1/4"
23 1/2"
23 1/2"
10"
13"
23 1/2"
23 1/2"
5"
5"
5"
3 1/2"
3 1/2"
2 1/2"
2 1/2"
3 1/2"
23 1/2"
59"
18 1/4"
23 1/2"
18 1/4"
18 1/4"
23 1/2"
59"
23 1/2"
59"
59"
59"
47"
47"
47"
59"
59"
59"
21 1/4"
28 1/4"
25 1/4"
28"
23"
20"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
4040-H
3 1/4" Sq.
4043-H
3 1/4" Sq.
4045-H
3 1/4" Sq.
4046-H
3 1/4" Sq.
4040S-H
3 1/4" Sq.
4043S-H
3 1/4" Sq.
4045S-H
3 1/4" Sq.
4046S-H
3 1/4" Sq.
40
22"
19"
4040 BT-H 4043 BT-H 4045 BT-H
3 1/4" Sq. 3 1/4" Sq. 3 1/4" Sq.
4046 BT-H
3 1/4" Sq.
15"
33 1/4"
16"
3 1/4"
27"
3 1/4"
3 1/4"
3 1/4"
COFFMAN STAIR PARTS • SINCE 1874
SOUTHAMPTON HEMLOCK
2 1/2"
2 1/2"
2 1/4"
1/4"
1 1/8"
2 1/2"
1 5/8"
1 5/8"
1 5/8"
6005-H
with Fillet
6019-H
with Fillet
6206-H
Shoe Rail
with Fillet
7/16"
6244-H
with Fillet
1/4"
1/4"
1/4"
6207-H
Fillet
2 3/4"
2 3/8"
1 5/8"
1/4"
1 5/8"
1 1/4"
1 5/8"
6208-H
Fillet
9 1/4"
9 1/4"
17 1/2"
9 1/4"
7 1/4"
17 1/2"
32"
17 1/2"
17 1/2"
42"
36"
32"
7 1/4"
21 1/4"
1 5/8"
1 5/8"
1 5/8"
1 5/8"
1 5/8"
5005-H
1 5/8" Sq.
5005-H
1 5/8" Sq.
5005-H
1 5/8" Sq.
5005-H
1 5/8" Sq.
Top View showing
Chamfer.
3 1/2"
3 1/2"
6 1/2"
13"
1 5/8"
4 1/2"
4 1/2"
17 1/2"
6 1/2"
17 1/2"
7 1/2"
17"
59"
59"
47"
36"
32"
59"
47"
17 1/2"
17"
7 1/2"
1 5/8"
1 5/8"
5360-H
5360-H
5360-H
5360-H
1 5/8" S4S 1 5/8" S4S 1 5/8" S4S 1 5/8" S4S
3 1/2"
9 1/2"
48"
48"
15 1/4"
9 1/4"
42"
36"
54 1/2"
42 1/2"
9 1/2"
1 5/8"
1 5/8"
5361-H
1 5/8" Sq.
5361-H
1 5/8" Sq.
25"
31 1/2"
19 1/2"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
3 1/4"
4500-H
3 1/4" Sq.
4501-H
3 1/4" Sq.
4505-H
3 1/4" Sq.
4004-H
3 1/4" Sq.
4005-H
3 1/4" Sq.
ADDITIONAL HEMLOCK RAILS AND BALUSTERS
HEAVY DUTY STAIR SYSTEM
Create a more massive balustrade using
these heavier rails and fillets with your
choice of newel posts and 2-1/2" spindles.
WALL MOUNTED HANDRAILS
When planning a wall mounted
handrail, look to the sleek, simple
lines of the 6042-H Rail combined
with our brass finish wall rail
brackets (page 32).
2 1/2"
3 1/4"
1/4"
1 1/4"
1/4"
2 1/2"
6344-H
Handrail
with Fillet
2 1/4"
1 1/4"
1 1/4"
7/16"
1/4"
6307-H
Fillet
2 1/2"
1 1/4"
2 1/2"
6308-H
Fillet
3 1/4"
6306-H
Shoe Rail
with Fillet
Top View showing
Eased Edge.
CONTEMPORARY BALUSTERS
An additional Coffman offering
for contemporary applications.
42"
48 "
6042-H
COFFMAN STAIR PARTS • SINCE 1874
1 7/16"
1 7/16"
5260EE-H
1 7/16" Sq.
5260EE-H
1 7/16" Sq.
41
HEMLOCK STARTING STEPS
1 1/32"
These starting steps are designed for use with
Georgian volutes/turnouts. All are shipped
complete with the starting riser, starting tread,
and all cove and shoe moulding.
1 1/4"
48"
7"
10 3/8"
48"
11 1/4"
8010-H
Bullnose
NOTE: Please specify right or left hand when
ordering single end starting steps. Reversible
starting steps are available as an option.
10 3/8"
6 1/4"
8010-H
10 3/8"
1 1/32"
Specify finished
stair width
1 1/4" 10 3/8"
48"
7"
10 3/8"
10 3/8"
6 1/4"
When measuring for finished stair width on
double end starting steps, include all finish
materials. Example: Sheetrock, skirtboard,
decorative tread brackets, etc.
6 1/4"
8015-H
Double End
Bull Nose
8015-H
HEMLOCK TREADS AND RISERS
LINEAL SKIRTBOARD
S4S edge-glued and
finger-jointed.
6974-H – 3/4" x 9-1/4"
6975-H – 3/4" x 11-1/4"
The products in this section are
manufactured under highly controlled
standards for beauty that will last a
lifetime. All are manufactured
without the use of finger-joints,
excluding landing tread, which is offered
both solid and finger-jointed.
8070S-H
Tread
No Return
1-1/32" x 11-1/2"
Treads and risers are available in standard
lengths of 36", 42", 48", 54", 60" and 72".
8070S MR-H
Coped Return Tread
1-1/32" x 11-1/2"
3/4"
7 1/2 - 8"
8370S-H
Three Piece Winder Tread
1-1/32" x 36", 42" and 48"
(RH shown)
8270S-H
Two Piece Winder Tread
1-1/32" x 36", 42" and 48"
(RH shown)
8470S-H
Platform
1-1/32" x 36", 42" and 48"
1 1/32"
8075S-H
Riser
3/4" x 7-1/2" and 8"
8080-H
1 1/4"
Nosing
1-1/4" x 1-1/32"
Lineal Stock
3 1/2"
3/4"
1/4"
8590-H
Landing Tread
5-1/4 " Wide
12 3/4"
19/64"
1/4" 3/4"
13/64"
1 1/32"
1 1/4"
8080-13 MR-H
1 1/4"
Coped Return Nosing
1-1/4" x 1-1/32" x 12-3/4"
2 1/4"
8090-H - 3-1/2" Wide
8590-H - 5-1/4" Wide
8090-H
Landing Tread
3-1/2" Wide
1 1/32"
1/2"
16"
TREAD AND
RISER CAPS
11 1/4"
6"
8095-H 13/16"
Cove Mould
13/16" x 5/8"
4 3/4"
1/2"
12 3/4"
8"
1/2"
10 3/8"
7"
8911-H
Reversible Starting End Cap
42
1/2"
5/8"
4 3/4"
6"
4 3/4"
1 1/32"
8085-H
Shoe Mould
1/2" x 3/4"
8071-H
4-3/4" x 11-1/2"
Tread Cap with
Mitered Return Nosing and Cove
Left or Right (RH shown)
SOFTWOOD SECTION
8072-H
4-3/4" x 11-1/2"
Tread Cap with
Nosing and Cove
8076-H
4-3/4" x 8"
Riser Cap
COFFMAN STAIR PARTS • SINCE 1874
HEMLOCK SPINDLES AND TOPS
8"
8"
5"
3"
5"
3"
32"
26"
26"
26"
26"
48"
36"
32"
32"
3"
H-232-H
1 5/8" Sq.
36"
8"
5"
1 5/8"
32"
48"
8"
5"
3"
1 5/8"
1 5/8"
2 1/2"
H-236-H
1 5/8" Sq.
H-248-H
1 5/8" Sq.
H-332-H
2 1/2" Sq.
2 1/2"
2 1/2"
H-336-H
2 1/2" Sq.
H-348-H
2 1/2" Sq.
10 3/4"
8 3/4"
6 3/4"
6 3/4"
4 3/4"
1 1/2"
4 1/2"
9"
5" 7 1/2"
1 5/8" 1 1/4"
7" 9"
12"
1"
1 1/2"
1 5/8"
T-209-H
1 5/8" Sq.
T-207-H
1 5/8" Sq.
1 5/8"
T-212-H
1 5/8" Sq.
1 5/8"
1 5/8"
T-218-H
1 5/8" Sq.
T-224-H
1 5/8" Sq.
5 3/4"
4"
3 1/8"
BT-305-H
Ball Top
2 3/8" Dia.
BT-406-H
Ball Top
3 1/8" Dia.
36"
32"
10 3/4"
8 3/4"
6 3/4"
4 3/4"
4 1/2"
1 5/8"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
T-228-H
1 5/8" Sq.
T-318-H
2 1/2 " Sq.
T-324-H
2 1/2" Sq.
T-328-H
2 1/2" Sq.
T-332-H
2 1/2" Sq.
T-336-H
2 1/2" Sq.
7"
7 3/4"
6 3/4"
1"
1"
1"
9"
1"
1"
5 1/4"
2 3/8"
3 1/4"
4 3/8"
BT-608-H
Ball Top
5 1/4" Dia.
UT-306-H
Urn Top
2 3/8" Dia.
UT-408-H
Urn Top
3 1/4" Dia.
UT-510-H
Urn Top
4 3/8" Dia.
4 1/8"
BT-507-H
Ball Top
4 1/8" Dia.
28"
24"
18"
2 1/2"
6 5/8"
1"
1"
2 3/8"
6 3/4"
4 3/4"
4 1/2"
9"
14 1/2"
14 1/2"
14 1/2"
14 1/2"
28"
24"
9" 18"
4 1/2"
14 1/2"
14 1/2"
1"
1 1/4"
4 3/4"
10"
3"
2 1/2"
1"
1"
1"
1"
1"
7"
5"
4"
4 3/4"
4"
1"
1"
2 3/8"
3 1/4"
2 3/8"
3 1/8"
5 1/4"
2 3/8"
3 3/8"
5"
ST-304-H
Southampton Top
2 3/8" Dia.
ST-405-H
Southampton Top
3 1/4" Dia.
RT-305-H
Round Top
2 3/8" Dia.
RT-406-H
Round Top
3 1/8" Dia.
RT-608-H
Round Top
5 1/4" Dia.
KT-303-H
Kent Top
2 3/8" Dia.
KT-403-H
Kent Top
2 3/8" Dia.
AD-610-H
Acorn Drop
5" Dia.
COFFMAN STAIR PARTS • SINCE 1874
SOFTWOOD SECTION
43
Ordering Specifications for Newels
Check local building codes for required height and baluster spacing.
For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.
NEWELS
Newels serve as the main structural support of the balustrade portion of the stair. Proper
placement, coupled with proper installation techniques, is critical to a structurally sound and
code compliant staircase. Newels should be placed at the top and bottom of every stair, at all
directional changes, and at intervals of not more than 8' on level balcony runs.
LANDING
INTERMEDIATE
LANDING NEWEL
BALCONY
BALCONY
LANDING NEWEL
UP
STARTING
NEWEL
POST-TO-POST NEWELS
PTP newels are designed with
upper (top) square blocks that
will receive the handrail.
Standard block sizes (5", 10" and
13") are provided for use at
various locations of the stair.
INTERMEDIATE LANDING NEWELS
Intermediate landing newels will have
angled rail entering and exiting the
upper square block from adjacent sides.
Because the newel is basically making
up for two rise dimensions in the stair
(the last rise before the intermediate
landing as well as
the first rise of the
LANDING
second straight
run), a longer
square block is necessary to
keep consistent rake rail
heights from the first run to the second.
A newel with a minimum 13" top block
will be required.
BALCONY INTERMEDIATE NEWELS
Balcony
intermediate
BALCONY
newels will
have level
rail entering and exiting the upper block
of the newel. A 5" top block is
recommended.
44
INTERMEDIATE
BALCONY NEWEL
STARTING NEWELS
A 5" top block will always
work at the beginning of the
stair. Larger top blocks are
unnecessary
and can appear
BALCONY
top-heavy.
BALCONY LANDING NEWELS
Balcony newels will have angled
rail entering from the lower side
of the newel with level rail
exiting from
the top of
BALCONY
the upper
block.
Because only one rise dimension
is involved, a 10" top block will
normally be required.
USE OF FITTINGS
WITH PTP NEWELS
The use of easings
and goosenecks in
PTP systems make
the need for longer
square blocks
unnecessary. Order a
5" top block newel
at all locations.
COFFMAN STAIR PARTS • SINCE 1874
Ordering Specifications for Newels
Check local building codes for required height and baluster spacing.
For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.
OVER-THE-POST NEWELS
All Over-the-Post newels
are manufactured with a
3/4" diameter pin turned
into the top of the newel
that will be installed into
the underside of the fittings
used in the rail system.
Recommended heights for the following newel placements are based on a 34" rake rail
height, a 7-1/2" rise, a 10" run, and a 1-1/4" tread overhang and are dependent on the
location of the newel matching the standard location listed with the application.
Variances of up to 3/4" can be expected in certain conditions and should be accounted for
when trying to achieve minimum code heights.
OTP STARTING NEWEL HEIGHTS (For 34" Rake Rail Height)
OTP newels are
manufactured in both
doweled bottom and square
bottom designs. Doweled
bottom newels have a 1-1/2"
diameter dowel designed
into the bottom of the newel
that is used to install the
starting newel into a starting
step. The height of these
newels cannot be adjusted,
making correct specification
critical in achieving desired
rake rail height.
STARTING
EASING
TURNOUT
VOLUTE
ASCENDING
VOLUTE
VERTICAL
VOLUTE
Net Measurement
Net Measurement
Net Measurement
Net Measurement
Measurement
36-1/2"
40-1/2"
39"
36"
33-7/8"
NET
MEASUREMENT
ADJUSTABLE NEWELS
An option available in all
Coffman families to the
fixed length doweled newels
is the adjustable newel.
These newels have a 1-1/2"
diameter by 10" deep hole
bored into the bottom of the
newel and are shipped with a
loose 19" dowel in the
carton. These newels allow
the installer to trim the
newel (up to 4") to achieve
exact rake rail
heights over
a wide variety
of applications.
NEWEL
CENTERED
ON RISER
NET
MEASUREMENT
MEASUREMENT:
TOP OF TREAD TO
TOP OF NEWEL
PLACEMENT
DICTATED BY
TEMPLATE
NEWEL
CENTERED
ON RISER
NOTE: Rake rail height requirements other than 34" can be adjusted on a 1:1 basis.
Example: For a 36" rake rail height, add 2" to the base number. For a 30" rake rail
height, subtract 4". Check local building codes.
NOTE: 1" movement in the newel from standard placement will change
the rail height by approximately 3/4". Moving newel placement away
from the second riser raises the rail height and moving it closer to
the second riser will lower the rail height.
10"
4" Range
of Cut
COFFMAN STAIR PARTS • SINCE 1874
45
Ordering Specifications for Balusters
Check local building codes for required height and baluster spacing.
For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.
All balusters fall into one of the following categories:
All baluster pins are 3/4" long by 3/4"
diameter and are turned with chamfered
bottoms and a centered glue ring.
Exception: 5015H, 5610H pins are 5/8" long
by 5/8" diameter.
Top diameter on the pin top balusters
will vary according to baluster size.
1-1/4" Baluster - 5/8" diameter
1-5/8" Baluster - 5/8" diameter
1-3/4" Baluster - 3/4" diameter
(except C-5611 which is 5/8")
1-9/16" Baluster - 3/4" diameter
Forged - 1/2" diameter
PIN TOP - Pin top balusters have turned, round tops that
will be inserted into holes drilled into unplowed handrail.
SQUARE TOP - Square top balusters have a turned portion,
leaving a square upper and lower portion. Installation of
square top balusters will require a plowed handrail.
PIN TOP
SQUARE TOP
FORGED IRON PIN TOP - Forged baluster pin tops are
1/2" diameter.
The stair’s rake and balcony rail height, along with code considerations on
baluster spacing, will determine the length and quantity of balusters required
on any given job. The tables below list the quantity and length of the
balusters necessary for each rake application for a 34" rake rail height.
BALUSTER QUANTITY AND LENGTH (For 34" Rake Rail Height)
All pin top balusters have a
guaranteed 3" minimum top
straight portion for trimming
and insertion.
CUT-AWAY
VIEW OF RAIL
BALCONY BALUSTER LENGTH
STARTING EASING
TURNOUT
VOLUTE
ASCENDING VOLUTE VERTICAL VOLUTE
BALUSTERS UNDER STARTING FITTINGS
QUANTITY – 1
LENGTH 39"
QUANTITY – 2
C-7?40, C-7?45
QUANTITY – 6
1-1/4" SQUARE
QUANTITY – 6
1-1/4" SQUARE
QUANTITY – 1
C-7?41, C-7?46
QUANTITY – 5
1-3/4" SQUARE
QUANTITY – 5
1-3/4" SQUARE
LENGTH 43"
LENGTH 41"
LENGTH 39"
QUANTITY – 1
Baluster length
requirements for the
balcony will match the
balcony rail height. If an
exact baluster length is
not available, simply
round up to the next
available length.
(Example: For a 38"
balcony rail height, order
a 39" baluster.)
BALCONY BALUSTER
LENGTH = BALCONY
RAIL HEIGHT
LENGTH 39"
BALCONY BALUSTER QUANTITY
BALUSTERS ON TREADS
1-1/4" BALUSTER SQUARE
4-1/2"
1-3/4" BALUSTER SQUARE
4-5/8"
Exception: For 1-3/4" Pin Top Baluster with
5/8" diameter tops (i.e. C-5611) use:
4-1/2"
MAXIMUM CENTER-TO-CENTER SPACING
(Under 4" Sphere Rule)
FRONT BALUSTER – 36"
SECOND BALUSTER – 39"
THIRD BALUSTER (optional) – 41"
Adjustments to rake rail heights from 34" can be accommodated on a 1:1
basis. Examples: For a 36" rail height, simply add 2" to the given length and
order the nearest baluster length (rounding up if necessary). For a 30" rake rail
height, subtract 4" from the given length and order the nearest baluster length
(rounding up if necessary).
NOTE: 44" balusters are available in all square bottom profiles. See page 50.
46
Spacing codes vary but generally fall under the 4"
sphere rule. The dimensions listed are recommended
center-to-center spacing measurements that will
safely comply with this code.
To obtain the quantity of balusters for
individual balcony runs, divide the length of the
balcony run by the corresponding center-to-center
spacing and round down.
COFFMAN STAIR PARTS • SINCE 1874
Ordering Specifications for Rails
Check local building codes for required height and baluster spacing.
For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.
RAIL AND LINEAL BALUSTRADE COMPONENTS
Rail and lineal balustrade components, like other lineal products, are
offered in even lengths from 4' to 16'. For rake portions of the
stair, measure along the slope of the stair or use the lineal formula:
Number of Treads x 13" (rounded up to the nearest even length).
BENDING RAIL BALUSTRADE COMPONENTS
BENDING RAIL
BENDING MOULD
PIN TOP
BALUSTER
SQUARE
TOP
BALUSTER
PLOWED RAIL is
moulded with a recessed
bottom for insertion of
square top balusters.
UNPLOWED RAIL has a
flat bottom that will be
drilled for the insertion
of pin top blausters.
LINEAL RAIL COMPONENTS consist of sub rail, shoe rail,
and fillet. Shoe rail is a plowed moulding designed to accept
the bottom of the baluster. Sub rail is used under unplowed
handrail with square top balusters in Post-to-Post systems to
provide a more substantial look to the balustrade. Fillet is a
finished moulding that will be installed between the balusters
in plowed rail, shoe rail and sub rail.
SUB RAIL
Each ply comprising the bending rail is designed and
manufactured with a tongue
and groove bead to create an
alignment of the plys. When
assembled, Coffman bending
rail results in a match of the
standard rail profile.
The minimum radius achievable with each rail profile
will depend on several factors. These factors include
such variables as the thickness of each ply, the overall
thickness of the handrail, the height of the handrail,
the angle of the stair, and whether the rail is bent on
the rake or on the level portion of the stair. The
minimum recommended radius for use on both rake
and level applications are listed in the chart for each
Coffman bending rail profile.
FILLET
PLOWED RAIL
The key components of curved rail construction are bending
rails and bending moulds which are available in all Coffman
rail profiles. Bending rail is most easily understood when
imagining a standard rail profile cut into thin, vertical strips.
Bending mould is a form, moulded to the outside profile of the
handrail, that is used to cradle the bending rail as it is being
shaped to the stair.
BENDING RAIL
MINIMUM
RADIUS
SHOE RAIL
RAIL ITEM
SHOE RAIL
SUB RAIL
FILLET
COFFMAN STAIR PARTS • SINCE 1874
RAKE RAIL
BALCONY RAIL
TRADITIONAL C-6016 (7 Piece)
42"
48"
TRADITIONAL C-6016 (9 Piece)
36"
42"
BRISTOL C-6116
48"
54"
CLASSIC C-6216-W
48"
54"
RICHMOND C-6416
48"
54"
LIBERTY C-6516
42"
48"
VIRGINIAN C-6616
42"
48"
MARION C-6716
48"
54"
ART DECO C-6816
48"
54"
HEMLOCK 6016-H, 6916-H
42"
48"
47
Ordering Specifications for Fittings
Check local building codes for required height and baluster spacing.
For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.
FITTINGS
Fittings, components used within rail systems, can be
incorporated into both PTP and OTP stairs. In OTP rail
systems, fittings are required to start the rail system, to
make directional and height transitions, to carry the rail
over intermediate balcony newels, and to terminate the
rail when using a half newel. A good check of any
Over-the-Post parts list is to make certain that a fitting is
ordered for each newel, including half newels, in the stair.
NOTE: Coffman fittings are shipped with all necessary rail
bolts, 1" tapered rail plugs, templates, and full instructions
to provide a quick, accurate, and professional installation.
FITTING DEFINITIONS
CAP VS. NO CAP
CAP
All fittings fall into two
categories: (1) those designed
and manufactured with a cap
and (2) those manufactured
without a cap.
All fittings with caps have a
3/4" diameter hole bored in the under side
of the cap to receive the top pin of the Overthe-Post newel. Fittings without caps are
designed to carry the baluster line through
a transition without the use of a
newel. Capped fittings are clearly
identified in both the drawings and
product descriptions.
FITTING
ORIENTATION
Fitting orientation is
determined from the
bottom of the stair
looking up. All fittings in
the photo to the right are
right-hand.
GOOSENECK FITTINGS
Gooseneck fittings are used to
accommodate transitions in
height and/or direction at
intermediate and balcony
landings.
NOTE: It is recommended that
a minimum difference of 4"
between rake rail height and
balcony rail height be kept on
all Over-the-Post systems.
GOOSENECK
FITTING
48
NO CAP
ONE-RISE GOOSENECK
DESIGNED FOR A 4" DIFFERENCE
IN RAKE TO BALCONY HEIGHT
BALCONY
RAIL HEIGHT
EX. 38"
ONE-RISE
GOOSENECK
RAKE
RAIL HEIGHT
EX. 34"
ONE-RISE VS. TWO-RISE
Most goosenecks are offered in both onerise and two-rise versions. The one-rise
gooseneck is manufactured with the
lower easing attached and is limited to
use on stairs where the difference in
rake rail height to balcony rail height is 4"
(Example: 34" rake rail height to 38"
balcony rail height). The corresponding
two-rise gooseneck makes the same height
and/or directional change as its one-rise
counterpart but is shipped with the
lower easing unattached. This versatile
two-piece design allows the installer to
trim or extend the straight section of the
gooseneck to a height that will work in
any situation. Two-rise goosenecks work
in applications where the difference in
rake rail height is less than 4" (Example:
34-1/2" to 38"), greater than 4"
(Example: 34" to 42"), or unknown at
the time of ordering.
ONE-RISE
TWO-RISE
GOOSENECK
FITTINGS
TWO-RISE GOOSENECK
COFFMAN STAIR PARTS • SINCE 1874
Ordering Specifications for Fittings
Check local building codes for required height and baluster spacing.
For more information and installation instructions refer to Coffman’s C-165 Stair Building Guide, page 3.
SUGGESTED GOOSENECKS FOR SOME COMMON APPLICATIONS
PLATFORM
PLATFORM
L
C-7060
C-7065
Left Hand Right Hand
2 Riser With Cap
5 1/2" Center of Rail
to Center of Rail
2nd FLOOR
2nd FLOOR
C-7070
C-7075
C-7071
C-7076
Left Hand Right Hand
No Cap
2nd FLOOR
L
WE
C-7096
C-7097
With Cap
C-7090
C-7095
C-7091
C-7094
Left Hand Right Hand
Landing Return
C-7080
C-7085
C-7081
C-7086
Left Hand Right Hand
With Cap
NEWEL
SQUARE TOP
NEWEL
WELLHOLE 5 1/2"
NE
NE
WELLHOLE 5 1/2"
NEWEL
L
WE
2nd FLOOR
NO EL
W
NE
NO EL
W
NE
WE
NE
C-7050
C-7055
Left Hand Right Hand
2 Riser No Cap
2nd FLOOR
NE
L
WE
N O EL
W
NE
NO EL
W
NE
2nd FLOOR
PLATFORM
PLATFORM
SPECIALTY FITTINGS
C-7019 OPENING CAP
C-7013
OVER EASING
C-7020 TANDEM CAP
An over easing OVER EASING
is designed to
carry the rail
system from the
rake (angled)
portion of the stair to the level, balcony
portion without the use of a gooseneck.
This elegant, flowing look is achieved
by combining the over easing with a
transitional fitting such as a tandem cap.
C-7089 (LOWER EASING DISCARDED)
C-7014S
90° UP EASING
C-7088
C-7089
With
Tandem Cap
C-7098
C-7099
No Cap
C-7007 COPED END
RAIL PROFILE COPED
(SHAPED) INTO END
OF FITTING
COPED ENDS
Some Coffman families contain a
Coped End which is a fitting that has
the profile of the rail shaped, or coped,
into one end of a straight piece of rail.
This fitting is used in conjunction with
an opening cap (Example C-7019) or a
gooseneck incorporating an opening cap
(Example C-7097), to accomodate
nonstandard angle changes.
STANDARD VOLUTE
(C-7035) FOR 34"
RAKE RAIL HEIGHT
ASCENDING VOLUTE
C-7033 FOR SAME 34"
RAKE RAIL HEIGHT
C-7086 TWO-RISE GOOSENECK WITH CAP
90° UP EASING
90° up easings are used to make a
horizontal to vertical 90° transition in a
rail system.
S-SERIES FITTINGS
Coffman’s S-Series
fittings accommodate
the continuous rail
codes on partial-open
stairs. Specify RightHand or Left-Hand
(from the bottom of
the stair looking up).
C-7047
LEFT-HAND
S-FITTING
COFFMAN STAIR PARTS • SINCE 1874
C-7011 LEVEL
QUARTERTURN NO CAP
COMBINING FITTINGS
Standard fittings will sometimes have
to be site-assembled to complete a
height and/or directional transition.
Basically all stair applications can be
satisfied using a combination of
currently available Coffman fittings.
In the example shown of a 180°
turn at balcony, you will need a tworise gooseneck with cap that turns
right 90° to sit on top of the newel
along with a level quarterturn without
a cap to complete the 180° turn.
ASCENDING VOLUTES
Coffman’s ascending volutes (C-7X33,
C-7X38) are designed to begin their
ascent much sooner than their standard
counterparts, allowing for the use of a
shorter newel and shorter balusters on
top of the bullnose starting step. This
lower, more proportional beginning of
an Over-the-Post system, coupled with
the graceful, flowing transition from
the volute to the rail, makes the
ascending volute an attractive addition
to any stair.
49
REPETITIVE SPECIALS
Coffman’s extensive Specials Program has created a
number of turnings and mouldings that are readily
available in addition to our standard product offering.
While not part of a standard Coffman family, these
products are manufactured on a repetitive basis
making them a timely and cost effective option.
Call Coffman for a quote.
• Rails are available plowed
1-3/4" and 2-1/4".
• Shoe, Fillet are available.
• Fittings are available.
C-6600
Rail
3 1/2" W x 2" H
C-4122
Newel
3" x 57 1/2"
C-4122BT
Newel
3" x 57 1/2"
C-4124
Newel
3" x 50"
C-4640
Newel
4 1/2" x 48"
C-4125BT
Newel
3" x 57 1/2"
C-4645
Newel
4 1/2" x 60"
C-5011
Baluster
1 1/4"Sq. x
36", 41"
C-4610
Newel
4 1/2" x 41"
C-5041
Baluster
1 1/4"Sq. x
36", 41"
C-4612
Newel
4 1/2" x 43 1/2"
C-5341
Baluster
Eased Edge
1 5/8"Sq. x
36",42"
C-4615
Newel
4 1/2" x 60"
Check local building codes.
C-6310
Rail
3 1/2" W x 2 3/8" H
C-5120
Baluster
1 1/8"Dia. x
34", 36", 39", 41"
C-5220
Baluster
1 9/16"Dia. x
34", 36", 39", 41"
C-5612
Baluster
2 1/4" Sq. x
31", 34", 36",
39", 41"
C-5602
Baluster
2 1/4" Sq. x
31", 34", 36",
39", 41"
C-5215
Baluster
1 3/4" Sq. x
34", 36", 39", 41"
44" BALUSTERS
Available in ALL Coffman
Square Bottom Profiles
• 44" overall length with no pin.
• Turning will match the 36"
baluster of that profile with
the additional length added
to the bottom block.
• Bottom of baluster will have
a 1/4" x 4" hole predrilled for
use with provided wooden
dowel pin or optional C-3203
Baluster Fastener.
50
Matches
36"
Profile
44"
4"
44" Balusters are used
under Turnouts (34"+
Rake Rail Heights), under
Volutes (35"+ Rake Rail
Heights), and on stairs with
higher rake rail heights.
44" Balusters are also used
in systems where a rake
orientation is preferred
with the baluster squares.
COFFMAN STAIR PARTS • SINCE 1874
Index
ITEM
PAGE
WONDERAIL
1034 . . . . . . . . . . . . . 34
1038 . . . . . . . . . . . . . 34
1044 . . . . . . . . . . . . . 34
1134 . . . . . . . . . . . . . 35
1138 . . . . . . . . . . . . . 35
1234 . . . . . . . . . . . . . 35
1238 . . . . . . . . . . . . . 35
4002 . . . . . . . . . . . . . 35
4003 . . . . . . . . . . . . . 35
4242 . . . . . . . . . . . . . 35
4245 . . . . . . . . . . . . . 35
4540BT . . . . . . . . . . . 34
4542BT . . . . . . . . . . . 34
4542BT Prepped . . . . 34
4547BT . . . . . . . . . . . 34
ACCESSORIES
23XX . . . . . . . . . . . . . 30, 31
29XX . . . . . . . . . . . . . 32
3000 . . . . . . . . . . . . . 34, 35, 36
3001 . . . . . . . . . . . . . 36
3002 . . . . . . . . . . . . . 36
3003 . . . . . . . . . . . . . 36
3004 . . . . . . . . . . . . . 36
3005 . . . . . . . . . . . . . 36
3008 . . . . . . . . . . . . . 36
3009 . . . . . . . . . . . . . 36
3010 . . . . . . . . . . . . . 34, 35, 36
3015 . . . . . . . . . . . . . 34, 35, 36
3020 . . . . . . . . . . . . . 34, 35, 36
3099 . . . . . . . . . . . . . 36
3201 . . . . . . . . . . . . . 36
3203 . . . . . . . . . . . . . 36
3203B . . . . . . . . . . . . 36
3283 . . . . . . . . . . . . . 36
3284 . . . . . . . . . . . . . 36
3286 . . . . . . . . . . . . . 36
3287 . . . . . . . . . . . . . 36
3301 . . . . . . . . . . . . . 36
3302 . . . . . . . . . . . . . 36
3501 . . . . . . . . . . . . . 36
3505 3" . . . . . . . . . . . 34, 36
3505 3-1/2" . . . . . . . . 35, 36
3505 3-1/4" HEM . . . 36
3505 4-3/8" HEM . . . 36
3601 . . . . . . . . . . . . . 31, 36
3901 . . . . . . . . . . . . . 36
4000 . . . . . . . . . . . . . 36
4200 . . . . . . . . . . . . . 36
7000 . . . . . . . . . . . . . 23
7217 . . . . . . . . . . . . . 36
7237 . . . . . . . . . . . . . 36
7317 . . . . . . . . . . . . . 35, 36
7317 HEM. . . . . . . . . 36
7318 . . . . . . . . . . . . . 20, 36
7337 . . . . . . . . . . . . . 34, 35, 36
7337 HEM. . . . . . . . . 36
8028 . . . . . . . . . . . . . 36
8029 . . . . . . . . . . . . . 36
NEWELS
2450 . . . . . . . . . . . . . 31
2452 . . . . . . . . . . . . . 31
2940 . . . . . . . . . . . . . 32
2942 . . . . . . . . . . . . . 32
4001 . . . . . . . . . . . . . 4, 11, 22
4002 . . . . . . . . . . . . . 11, 22, 35
4003 . . . . . . . . . . . . . 11, 22, 35
4003L . . . . . . . . . . . . 11, 22
4004 . . . . . . . . . . . . . 4, 11, 22
4004BT . . . . . . . . . . . 4, 11, 22
4004 HEM. . . . . . . . . 37, 41
4005 . . . . . . . . . . . . . 11, 22
4005BT . . . . . . . . . . . 11, 22
4005 HEM. . . . . . . . . 41
4006 . . . . . . . . . . . . . 11, 22
4006BT . . . . . . . . . . . 11, 22
4007 . . . . . . . . . . . . . 4, 11
4008 . . . . . . . . . . . . . 11
4009 . . . . . . . . . . . . . 11
4010 . . . . . . . . . . . . . 4, 8
4010PT HEM . . . . . . 37, 38
4011 . . . . . . . . . . . . . 8
4011 HEM. . . . . . . . . 38
4011F HEM. . . . . . . . 37, 38
ITEM
PAGE
4012 . . . . . . . . . . . . . 8
4014 . . . . . . . . . . . . . 8
4014 HEM. . . . . . . . . 37, 38
4015 . . . . . . . . . . . . . 8
4015 HEM. . . . . . . . . 38
4017 . . . . . . . . . . . . . 8
4018 . . . . . . . . . . . . . 8
4018 HEM. . . . . . . . . 38
4019 . . . . . . . . . . . . . 4, 8
4030 . . . . . . . . . . . . . 8
4035 . . . . . . . . . . . . . 8
4038 . . . . . . . . . . . . . 8
4040 . . . . . . . . . . . . . 4, 9
4040S . . . . . . . . . . . . 4, 9
4040BT . . . . . . . . . . . 4, 9
4040 HEM. . . . . . . . . 37, 38, 40
4040F HEM. . . . . . . . 37, 40
4040S HEM. . . . . . . . 37, 40
4040BT HEM . . . . . . 37, 40
4042 . . . . . . . . . . . . . 9
4042S . . . . . . . . . . . . 9
4042BT . . . . . . . . . . . 9
4043 HEM. . . . . . . . . 38, 40
4043S HEM. . . . . . . . 40
4043BT HEM . . . . . . 40
4045 . . . . . . . . . . . . . 9
4045S . . . . . . . . . . . . 9
4045BT . . . . . . . . . . . 9
4045 HEM. . . . . . . . . 38, 40
4045F HEM. . . . . . . . 40
4045S HEM. . . . . . . . 40
4045BT HEM . . . . . . 40
4046 . . . . . . . . . . . . . 9
4046S . . . . . . . . . . . . 9
4046L . . . . . . . . . . . . 9
4046BT . . . . . . . . . . . 9
4046 HEM. . . . . . . . . 38, 40
4046S HEM. . . . . . . . 40
4046BT HEM . . . . . . 40
4050 . . . . . . . . . . . . . 8
4055 . . . . . . . . . . . . . 9
4055BT . . . . . . . . . . . 9
4058 . . . . . . . . . . . . . 9
4058BT . . . . . . . . . . . 9
4060 . . . . . . . . . . . . . 8, 10
4061 . . . . . . . . . . . . . 8, 10, 18
4063 . . . . . . . . . . . . . 8, 10, 18
4064 . . . . . . . . . . . . . 8, 10, 18
4065 . . . . . . . . . . . . . 8, 10, 18
4065 HEM. . . . . . . . . 37, 38
4066 . . . . . . . . . . . . . 8, 10, 18
4070 . . . . . . . . . . . . . 4, 22
4070 HEM. . . . . . . . . 37
4072 . . . . . . . . . . . . . 22
4073 . . . . . . . . . . . . . 22
4073L . . . . . . . . . . . . 22
4073 HEM. . . . . . . . . 37
4074 . . . . . . . . . . . . . 4, 20
4075 . . . . . . . . . . . . . 4, 29
4076 . . . . . . . . . . . . . 4, 20
4077 . . . . . . . . . . . . . 4, 29
4090 . . . . . . . . . . . . . 29
4091 . . . . . . . . . . . . . 4, 29
4092 . . . . . . . . . . . . . 29
4095 . . . . . . . . . . . . . 29
4096 . . . . . . . . . . . . . 4, 29
4097 . . . . . . . . . . . . . 28
4122 . . . . . . . . . . . . . 50
4122BT . . . . . . . . . . . 50
4124 . . . . . . . . . . . . . 50
4125BT . . . . . . . . . . . 50
4130 . . . . . . . . . . . . . 4, 12
4135 . . . . . . . . . . . . . 12
4150 . . . . . . . . . . . . . 4, 13
4152 . . . . . . . . . . . . . 13
4155 . . . . . . . . . . . . . 13
4156 . . . . . . . . . . . . . 13
4160 . . . . . . . . . . . . . 12
4163 . . . . . . . . . . . . . 12
4165 . . . . . . . . . . . . . 12
4210 . . . . . . . . . . . . . 4, 10
4215 . . . . . . . . . . . . . 10
4240 . . . . . . . . . . . . . 4, 11
4242 . . . . . . . . . . . . . 11, 35
4245 . . . . . . . . . . . . . 11, 35
4245L . . . . . . . . . . . . 11
ITEM
PAGE
4250 . . . . . . . . . . . . . 14
4251 . . . . . . . . . . . . . 14
4252 . . . . . . . . . . . . . 14
4255 . . . . . . . . . . . . . 14
4256 . . . . . . . . . . . . . 14
4257 . . . . . . . . . . . . . 14
4260 . . . . . . . . . . . . . 16
4261 . . . . . . . . . . . . . 16
4262 . . . . . . . . . . . . . 16
4270 . . . . . . . . . . . . . 4, 14
4271 . . . . . . . . . . . . . 4, 16
4272 . . . . . . . . . . . . . 4, 14
4275 . . . . . . . . . . . . . 14
4276 . . . . . . . . . . . . . 16
4277 . . . . . . . . . . . . . 14
4280 . . . . . . . . . . . . . 4, 15
4280L . . . . . . . . . . . . 15
4281 . . . . . . . . . . . . . 4, 17
4281L . . . . . . . . . . . . 17
4282 . . . . . . . . . . . . . 4, 15
4282L . . . . . . . . . . . . 15
4285 . . . . . . . . . . . . . 15
4285L . . . . . . . . . . . . 15
4286 . . . . . . . . . . . . . 17
4286L . . . . . . . . . . . . 17
4287 . . . . . . . . . . . . . 15
4287L . . . . . . . . . . . . 15
4474 . . . . . . . . . . . . . 20
4476 . . . . . . . . . . . . . 20
4500 HEM. . . . . . . . . 37, 41
4501 HEM. . . . . . . . . 41
4505 HEM. . . . . . . . . 41
4510 . . . . . . . . . . . . . 4, 18
4511 . . . . . . . . . . . . . 4, 18
4515 . . . . . . . . . . . . . 18
4516 . . . . . . . . . . . . . 18
4530 . . . . . . . . . . . . . 4, 18
4531 . . . . . . . . . . . . . 4, 18
4535 . . . . . . . . . . . . . 18
4540BT . . . . . . . . . . . 4, 19, 34
4541BT . . . . . . . . . . . 19
4542BT . . . . . . . . . . . 19, 34
4242BT Prepped . . . . 34
4544BT . . . . . . . . . . . 4, 19
4545BT . . . . . . . . . . . 19
4546BT . . . . . . . . . . . 19
4547BT . . . . . . . . . . . 19, 34
4548BT . . . . . . . . . . . 19
4550BT . . . . . . . . . . . 4, 19
4555BT . . . . . . . . . . . 19
4556BT . . . . . . . . . . . 19
4557BT . . . . . . . . . . . 19
4560BT . . . . . . . . . . . 4, 19
4563 . . . . . . . . . . . . . 4, 18
4564BT . . . . . . . . . . . 19
4565 . . . . . . . . . . . . . 18
4566BT . . . . . . . . . . . 19
4567BT . . . . . . . . . . . 19
4610 . . . . . . . . . . . . . 50
4612 . . . . . . . . . . . . . 50
4615 . . . . . . . . . . . . . 50
4640 . . . . . . . . . . . . . 50
4645 . . . . . . . . . . . . . 50
4660 . . . . . . . . . . . . . 10
4661 . . . . . . . . . . . . . 10
4662 . . . . . . . . . . . . . 10
4690 . . . . . . . . . . . . . 28
4691 . . . . . . . . . . . . . 28
4692 . . . . . . . . . . . . . 28
4695 . . . . . . . . . . . . . 29
4696 . . . . . . . . . . . . . 29
4697 . . . . . . . . . . . . . 28
4740 HEM. . . . . . . . . 37
4745 HEM. . . . . . . . . 37
4810 . . . . . . . . . . . . . 4, 16
4810 HEM. . . . . . . . . 37
4813 HEM. . . . . . . . . 37
4814 HEM. . . . . . . . . 37
4815 . . . . . . . . . . . . . 16
4817 HEM. . . . . . . . . 37
4840 . . . . . . . . . . . . . 4, 17
4840 HEM. . . . . . . . . 37
4843 HEM. . . . . . . . . 37
4845 . . . . . . . . . . . . . 17
4860 . . . . . . . . . . . . . 16
4862 . . . . . . . . . . . . . 16
COFFMAN STAIR PARTS • SINCE 1874
ITEM
PAGE
4890 . . . . . . . . . . . . . 4, 28
4891 . . . . . . . . . . . . . 28
4892 . . . . . . . . . . . . . 4, 28
BALUSTERS
Any Profile 44" . . . . . 50
25XX . . . . . . . . . . . . . 31
28XX . . . . . . . . . . . . . 30
29XX . . . . . . . . . . . . . 32, 33
5005 . . . . . . . . . . . . . 5, 9, 19, 22, 35
5005 HEM. . . . . . . . . 37, 41
5011 . . . . . . . . . . . . . 50
5015 . . . . . . . . . . . . . 5, 8, 9, 18, 34
5015 HEM. . . . . . . . . 37, 38
5025 . . . . . . . . . . . . . 5, 8
5035 . . . . . . . . . . . . . 5, 8
5040 . . . . . . . . . . . . . 5, 8
5040 HEM. . . . . . . . . 37, 38
5041 . . . . . . . . . . . . . 50
5050 . . . . . . . . . . . . . 5, 9
5060 . . . . . . . . . . . . . 5, 21
5060 HEM. . . . . . . . . 37, 40
5067 . . . . . . . . . . . . . 5, 9, 19
5067 HEM. . . . . . . . . 37, 40
5070 . . . . . . . . . . . . . 5, 9
5070 HEM. . . . . . . . . 37, 40
5105 . . . . . . . . . . . . . 5, 9, 19, 35
5105 HEM. . . . . . . . . 37, 40
5120 . . . . . . . . . . . . . 50
5141 . . . . . . . . . . . . . 5, 13
5151 . . . . . . . . . . . . . 5, 12, 13
5201 . . . . . . . . . . . . . 5, 15
5211 . . . . . . . . . . . . . 5, 14, 15
5215 . . . . . . . . . . . . . 50
5220 . . . . . . . . . . . . . 50
5221 . . . . . . . . . . . . . 5, 17
5231 . . . . . . . . . . . . . 5, 16, 17
5241 . . . . . . . . . . . . . 5, 15
5251 . . . . . . . . . . . . . 5, 14, 15
5260EE HEM. . . . . . . 37, 41
5315 HEM. . . . . . . . . 37, 38
5341 . . . . . . . . . . . . . 50
5360 . . . . . . . . . . . . . 5, 21
5360 HEM. . . . . . . . . 37, 41
5361 HEM. . . . . . . . . 37, 41
5510 . . . . . . . . . . . . . 7
5511 . . . . . . . . . . . . . 7
5515 . . . . . . . . . . . . . 7
5531 . . . . . . . . . . . . . 7
5541 . . . . . . . . . . . . . 7
5551 . . . . . . . . . . . . . 7
5567 . . . . . . . . . . . . . 7
5570 . . . . . . . . . . . . . 7
5571 . . . . . . . . . . . . . 7
5575 . . . . . . . . . . . . . 7
5576 . . . . . . . . . . . . . 7
5601 . . . . . . . . . . . . . 5, 11, 22
5602 . . . . . . . . . . . . . 50
5610 . . . . . . . . . . . . . 5, 8, 10, 11, 18
5610 HEM. . . . . . . . . 37, 38
5611 . . . . . . . . . . . . . 5, 10, 11
5611 HEM. . . . . . . . . 37, 38
5612 . . . . . . . . . . . . . 50
5661 . . . . . . . . . . . . . 5, 18, 19
5770 . . . . . . . . . . . . . 21
5800 HEM. . . . . . . . . 37
5845 . . . . . . . . . . . . . 5, 16, 17
RAIL, SHOE and FILLET
6000P . . . . . . . . . . . . 5, 20
6001 . . . . . . . . . . . . . 5, 20
6002 . . . . . . . . . . . . . 5, 20
6005P1 . . . . . . . . . . . 5, 22, 35
6005 HEM. . . . . . . . . 37, 41
6006 . . . . . . . . . . . . . 9, 11, 13, 15,
17, 19, 22, 23
6007 . . . . . . . . . . . . . 9, 11, 13, 15,
17, 19, 22, 23
6010 . . . . . . . . . . . . . 5, 8, 9, 24, 34
6010 HEM. . . . . . . . . 37, 38, 39, 40
6015 . . . . . . . . . . . . . 8, 10, 16, 38
6016 . . . . . . . . . . . . . 8
6016 HEM. . . . . . . . . 38, 41
6019 HEM. . . . . . . . . 37, 41
6031 . . . . . . . . . . . . . 9
6032 . . . . . . . . . . . . . 9
ITEM
PAGE
6040 . . . . . . . . . . . . . 23
6042 . . . . . . . . . . . . . 23
6042 HEM. . . . . . . . . 37, 41
6045 . . . . . . . . . . . . . 9, 19, 23
6050 . . . . . . . . . . . . . 9, 19, 23
6106 HEM. . . . . . . . . 39, 40
6107 HEM. . . . . . . . . 39, 40
6110 . . . . . . . . . . . . . 5, 12, 13, 25
6115 . . . . . . . . . . . . . 12
6116 . . . . . . . . . . . . . 12
6206 HEM. . . . . . . . . 37, 38, 41
6207 HEM. . . . . . . . . 37, 38, 41
6208 HEM. . . . . . . . . 37, 41
6210 HEM. . . . . . . . . 37, 38
6210W. . . . . . . . . . . . 5, 10, 11, 16,
17, 24
6216W. . . . . . . . . . . . 10, 16
6244 HEM. . . . . . . . . 37, 41
6300 . . . . . . . . . . . . . 5, 20
6301 . . . . . . . . . . . . . 5, 20
6302 . . . . . . . . . . . . . 5, 20
6306 HEM. . . . . . . . . 41
6307 HEM. . . . . . . . . 41
6308 HEM. . . . . . . . . 41
6310 . . . . . . . . . . . . . 50
6344 HEM. . . . . . . . . 37, 41
6410 . . . . . . . . . . . . . 5, 23,25
6415 . . . . . . . . . . . . . 23
6416 . . . . . . . . . . . . . 23
6510 . . . . . . . . . . . . . 5, 18, 19, 25
6515 . . . . . . . . . . . . . 18
6516 . . . . . . . . . . . . . 18
6600 . . . . . . . . . . . . . 50
6610 . . . . . . . . . . . . . 5, 23, 25
6615 . . . . . . . . . . . . . 23
6616 . . . . . . . . . . . . . 23
6700P . . . . . . . . . . . . 5, 20
6700P1 . . . . . . . . . . . 5, 20
6715 . . . . . . . . . . . . . 14
6716 . . . . . . . . . . . . . 14
6719 . . . . . . . . . . . . . 5, 14, 15, 25, 35
6770P . . . . . . . . . . . . 5, 20
6810 . . . . . . . . . . . . . 5, 16, 17, 25
6815 . . . . . . . . . . . . . 16
6816 . . . . . . . . . . . . . 16
6910S HEM. . . . . . . . 37, 39
6915 . . . . . . . . . . . . . 39
6916 HEM. . . . . . . . . 39
FITTINGS
70XX . . . . . . . . . . . . . 24
70XX HEM . . . . . . . . 39
71XX . . . . . . . . . . . . . 25
72XXW . . . . . . . . . . . 24
74XX . . . . . . . . . . . . . 25
75XX . . . . . . . . . . . . . 25
76XX . . . . . . . . . . . . . 25
77XX . . . . . . . . . . . . . 25
78XX . . . . . . . . . . . . . 25
79XX HEM . . . . . . . . 39
7000 . . . . . . . . . . . . . 23
7005 . . . . . . . . . . . . . 23
7023 . . . . . . . . . . . . . 23
7024 . . . . . . . . . . . . . 23
7025 . . . . . . . . . . . . . 23
STARTING STEPS . .
8010 . . . . . . . . . . . . . 26
8010 HEM. . . . . . . . . 42
8011 . . . . . . . . . . . . . 27
8015 . . . . . . . . . . . . . 26
8015 HEM. . . . . . . . . 42
8016 . . . . . . . . . . . . . 26
8020 . . . . . . . . . . . . . 26
8025 . . . . . . . . . . . . . 26
8030 . . . . . . . . . . . . . 26
8040 . . . . . . . . . . . . . 26
8041 . . . . . . . . . . . . . 26
8050 . . . . . . . . . . . . . 26
8060 . . . . . . . . . . . . . 26
8061 . . . . . . . . . . . . . 26
8065 . . . . . . . . . . . . . 26
8630 . . . . . . . . . . . . . 26
8650 . . . . . . . . . . . . . 26
8911 . . . . . . . . . . . . . 27
8911 HEM. . . . . . . . . 42
ITEM
PAGE
TREADS and RISERS
6974 . . . . . . . . . . . . . 27
6974 HEM. . . . . . . . . 41
6975 . . . . . . . . . . . . . 27
6975 HEM. . . . . . . . . 41
8070 . . . . . . . . . . . . . 27
8070S HEM. . . . . . . . 41
8071 . . . . . . . . . . . . . 27
8071 HEM. . . . . . . . . 41
8072 . . . . . . . . . . . . . 27
8072 HEM. . . . . . . . . 41
8075 . . . . . . . . . . . . . 27
8075S HEM. . . . . . . . 41
8076 . . . . . . . . . . . . . 27
8076 HEM. . . . . . . . . 41
8080 . . . . . . . . . . . . . 27
8080 HEM. . . . . . . . . 41
8080-13 . . . . . . . . . . . 27
8080-13 HEM . . . . . . 41
8080 MR . . . . . . . . . . 27
8081 . . . . . . . . . . . . . 27
8085 . . . . . . . . . . . . . 27
8085 HEM. . . . . . . . . 41
8090 . . . . . . . . . . . . . 27
8090 HEM. . . . . . . . . 41
8095 . . . . . . . . . . . . . 27
8095 HEM. . . . . . . . . 41
8270 . . . . . . . . . . . . . 27
8270S HEM. . . . . . . . 41
8370 . . . . . . . . . . . . . 27
8370S HEM. . . . . . . . 41
8470 . . . . . . . . . . . . . 27
8470S HEM. . . . . . . . 41
8590 . . . . . . . . . . . . . 27
8590 HEM. . . . . . . . . 41
8971 . . . . . . . . . . . . . 27
8972 . . . . . . . . . . . . . 27
8976 . . . . . . . . . . . . . 27
SPINDLES and TOPS
AD610. . . . . . . . . . . . 43
BT305 . . . . . . . . . . . . 43
BT406 . . . . . . . . . . . . 43
BT507 . . . . . . . . . . . . 43
BT608 . . . . . . . . . . . . 43
H-232 . . . . . . . . . . . . 43
H-236 . . . . . . . . . . . . 43
H-248 . . . . . . . . . . . . 43
H-332 . . . . . . . . . . . . 43
H-336 . . . . . . . . . . . . 43
H-348 . . . . . . . . . . . . 43
KT303 . . . . . . . . . . . . 43
KT403 . . . . . . . . . . . . 43
RT305 . . . . . . . . . . . . 43
RT406 . . . . . . . . . . . . 43
RT608 . . . . . . . . . . . . 43
ST304 . . . . . . . . . . . . 43
ST405 . . . . . . . . . . . . 43
T-207. . . . . . . . . . . . . 43
T-209. . . . . . . . . . . . . 43
T-212. . . . . . . . . . . . . 43
T-218. . . . . . . . . . . . . 43
T-224. . . . . . . . . . . . . 43
T-228. . . . . . . . . . . . . 43
T-318. . . . . . . . . . . . . 43
T-324. . . . . . . . . . . . . 43
T-328. . . . . . . . . . . . . 43
T-332. . . . . . . . . . . . . 43
T-336. . . . . . . . . . . . . 43
UT306. . . . . . . . . . . . 43
UT408. . . . . . . . . . . . 43
UT510. . . . . . . . . . . . 43
FORGED BALUSTRADE
PROGRAM
2XXX . . . . . . . . . . . . 30, 31,
32, 33
51
Custom Profiles and Premium Species
NEW CNC/CAM System
Allows Fast, Cost-Effective,
and Precise Wood
Turnings of YOUR
Custom Profiles.
Any Specie.
Any Quantity.
Any Profile.
• AutoCAD drawings can be
supplied by you or created
by Coffman from existing
parts, photographs, or your
unique concept.
*Any Specie suitable for Stair Part production.
Contact Coffman for more information on
individual specie requests.
• Quotes on any specie,
any profile, any quantity.
*
• Raw material in stock in
many species for
immediate production.
See partial list below.
Alder
Mahogany
Walnut
Lyptus
White Oak
Hickory
Birch
Ash
Southern Yellow Pine
Brazilian Cherry
Pictured above is Coffman’s
state-of-the-art Locatelli
CNC turning lathe.
®
Coffman Stairs LLC
1000 Industrial Road
Marion,Virginia 24354
Phone: 276-783-7251
Fax: 276-783-6937
www.coffmanstairs.com
sales@coffmanstairs.com
A Company of VISADOR Holding Corporation.
C-173F (07-08) © 2008 Coffman Stairs LLC