General accessories and roof decorations for concrete

advertisement
Prospekt_Zubehoer-Dachschmuck_CD_GB_0109
03.03.2010
13:46 Uhr
Seite 1
General accessories and roof
decorations for concrete roofing tiles
and clay roof tiles
Prospekt_Zubehoer-Dachschmuck_CD_GB_0109
03.03.2010
13:46 Uhr
Seite 2
General range of accessories for concrete roofing tiles.
Our range of accessories and roof decorations is being constantly updated. The latest version can be found at: www.nelskamp.de
Walking grid 40 cm
coated
Length:
~ 40.0 cm
Walking grid 80 cm
coated
Length:
~ 80.0 cm
Walking grid 150 cm
coated
Length:
~ 150.0 cm
Eaves comb
~ 1.1 pcs/m
Width:
~ 34.0 cm
Eaves ventilation strips
grey or brown, 2 m complete
Width:
~ 34.0 cm
Snow rib
galvanised, 3 m long, 20 cm high
Width:
~ 34.0 cm
Flexible universal hose
for all concrete roofing tiles
with adapter and hose clip
Length:
~ 50 cm
Copper roll/Alu roll 2000
Length:
~5m
Width: ~ 29 cm, 33 cm, 36 cm
Ventilation cross-section: permanent acc. to DIN 4108, Part 3
Natural copper, anthracite, red
Ridge/crest lath holder
Start ridge and ridge end disc
Connecting clip
for snow rib
Coating agent
1 litre, 35 kg
Ridge or crest clip no. 470/77
for crest/ridge flap
Ridge or crest clip no. 470/76
for ridge element
Drill
ø 5 mm, 100 mm long
Screw nail 100 mm
Diamond cutting wheel
ø 230 mm
Insulating fresh air element
Ventilation cross-section: ~ 200 cm2
Installation aid with screw (512) for cut pieces
in the crest area
Eaves fresh air element
~ 1.1 pcs/m
Installation aid with wire (513) for cut pieces
in the crest area
Snow hook
Prospekt_Zubehoer-Dachschmuck_CD_GB_0109
03.03.2010
13:46 Uhr
Seite 3
General range of accessories for clay roof tiles.
Our range of accessories and roof decorations is being constantly updated. The latest version can be found at: www.nelskamp.de
Walking grid 40 cm
coated
Length:
~ 40.0 cm
Walking grid 80 cm
coated
Length:
~ 80.0 cm
Walking grid 150 cm**
coated
Length:
~ 150.0 cm
Eaves fresh air element
~ 1.1 pcs/m
Width:
~ 34.0 cm
Eaves comb
~ 1.1 pcs/m
Width:
~ 34.0 cm
Eaves ventilation strips
grey or brown, 2 m complete
Width:
~ 34.0 cm
SnapStep universal alu step***
coated, for mounting on different lath thicknesses,
can be adjusted for roof pitches from 0° - 60°;
red, brown, black
SnapStep 40 cm universal walking grid with two brackets*
coated, for mounting on different lath thicknesses,
can be adjusted for roof pitches from 0° - 60°;
red, brown, black
SnapStep 80 cm universal walking grid with two brackets*
coated, for mounting on different lath thicknesses,
can be adjusted for roof pitches from 0° - 60°;
red, brown, black
Flexible universal hose
for all clay roof tiles
with adapter and hose clip
Length:
~ 50 cm
Flexible universal hose
for all NIBRA® clay roof tiles
with adapter and hose clip
Length:
~ 50 cm
Copper roll/Alu roll 2000
Length:
~5m
Width: ~ 29 cm, 33 cm, 36 cm
Ventilation cross-section: permanent acc. to DIN 4108, Part 3
Natural copper, anthracite, red
Ridge/crest lath holder
Snow rib
galvanised, 3.0 m long, 20 cm high
galvanised, 1.5 m long, 20 cm high (only available for
F 13 Classic, F 10 Ü, F 7 18°, DS 5, MS 5 and G 10)
Connecting clip
for snow rib
Start ridge and ridge end disc/crest end disc
Rubber collar
Start ridge and ridge end disc/crest end disc
Connecting collar ø 125 for roof substructure
leadthrough with through pantiles
Screw nail 100 mm
Snow hook
Insulating fresh air element
Ventilation cross-section: ~ 200 cm2
Installation aid with screw (512) for cut pieces
in the crest area
*
Installation aid with wire (513) for cut pieces
in the crest area
only available F 15, F 12 Ü, F 13 Classic, F 10 Ü,
Hollow tile, H 14, H 10, D 15 Ü, D 13, DS 10, R 15,
R 13 S, R 10 and G 10
** Not ex stocks – delivery period on request
*** only available F 15, F 12 Ü, F 13 Classic, F 10 Ü,
Hollow tile, H 14, D 15 Ü, D 13, DS 10, R 15,
R 13 S, R 10 and G 10
Cold slip
750 ml, 10 l
Cold glaze
750 ml
Ridge or crest clips
Drill
ø 5 mm, 100 mm long
Diamond cutting wheel
ø 230 mm
Prospekt_Zubehoer-Dachschmuck_CD_GB_0109
03.03.2010
13:47 Uhr
Seite 4
Copper roll 2000 and Alu roll 2000.
The starring rolls on ridges and crests.
Copper roll 2000 and Alu roll 2000 are 100% solutions for sealing
and ventilating ridges and crests. 100% metal and thus ideal for
the high demands in this area of the roof. The rolls are made
entirely of copper or aluminium in the widths 290 mm, 330 mm
and 360 mm. The safe function and service life are optimised
by the use of only one material. The ventilation cross-section
fully complies with DIN 4108, Part 3., i.e. permanent ventilation
is guaranteed. This is achieved by the collar-shaped vent holes
that safely drain any moisture in the event of any seepage
water. The pleated area, with an elongation capacity of 20%,
is moulded to the curves of the roofing tiles or roof tiles with a
slight thumb pressure. The adhesive strip of butyl rubber ensures
the permanently plastic as well as non-ageing and weatherproof
connection to the roofing materials.
The middle part of the roll is of a sturdy material strength and
can be nailed to the ridge lath. The punctiform embossment
makes work easier. It marks the centre of the roll and facilitates
equidistant nailing. All materials used are solvent-free and
recyclable as well as being environment friendly.
COPPER, natural colour
ALU, red
Copper roll 2000
This is supplied in its natural colour. There is thus no need for
colour matching on coloured roofs. After laying the material
assumes the brown copper colour that is then covered by the
typical patina after longer exposure to weathering. Copper roll
2000 is fully resistant to weathering and UV and has a very
long service long. In those areas of visible copper strips that
are exposed to weathering, Copper roll 2000 counteracts the
growth of moss and lichen on the roof. Copper roll 2000 perfectly
matches other roof materials of copper. Our Alu roll 2000
should be used in combination with zinc materials.
Alu roll 2000
The most common roof colours are covered with the colours
anthracite and red. The high-quality, 2-layer stove-enamel finish
is UV-stabilised, weatherproof and corresponds to the quality of
roofing components.
ALU, anthracite
For roofing tiles and roof tiles. For all common types of laying.
Whether wide, narrow or maximum overlap, Copper roll 2000 and Alu roll 2000 fit any roof.
Strip width 290 mm (normal undercover)
Strip width 290 mm (narrow undercover)
Strip width 330 mm (wide undercover)
Strip width 360 mm (max. undercover)
Prospekt_Zubehoer-Dachschmuck_CD_GB_0109
03.03.2010
13:47 Uhr
Seite 5
Width 290 mm
Width 330 mm
Width 360 mm
Copper roll 2000 and Alu roll 2000 are available in the widths
290 mm, 330 mm and 360 mm. The rolls are always 5 m long.
Three points for fast laying.
The raised dots mark the median line and facilitate flush laying.
It also allows an exact alignment of the ridge tiles along the ridge
and crest lath.
We have also thought about on-the-job safety.
The bent edges of the roll improve occupational safety.
1
2
Perfect ventilation with water deflector.
Spacious ventilation areas guarantee permanent ventilation according
to DIN 4108, Part 3. The collar-shaped design of the holes also safely
deflects any moisture.
Your work becomes easier
and safer.
Laying ridges with no mortar using Copper roll and Alu roll.
3
4
1 The Copper and Alu roll are processed directly from the roll.
Unroll a strip of approx. 50 cm and staple to the centre of
the ridge lath. We recommend copperplate cramps or copper
nails for Copper roll.
2 Proceed in the same way up to the end of the ridge.
3 Remove the covering from the adhesive strip on the underside.
4 When moulding the roll to roofing tiles or roof tiles the
pleat is first pressed against the rim and stretched before
shaping the water channel part.
5
6
Note: The base must be clean, dry and free from grease
or dust before you start work with the adhesive strip.
5 Cut off the roll at the end of the ridge with a pair of universal
scissors. Done!
6 You can now start laying the ridge or crest tiles. Each ridge
tile must be fastened with a ridge clip and screw nail to the
counter-lath.
Prospekt_Zubehoer-Dachschmuck_CD_GB_0109
03.03.2010
13:47 Uhr
Seite 6
The range of roof decorations for clay roof tiles.
Our range of accessories and roof decorations is being constantly updated. The latest version can be found at: www.nelskamp.de
Clay ridge owl
Overall height: ~ 48.0 cm
Clay ridge cockerel
Overall height: ~ 61.0 cm
Weight: ~ 5.0 kg
Clay ridge cat 1
Overall height: ~ 39.0 cm
Clay sleepwalker, glazed
(with white nightdress)
Overall height: ~ 48.0 cm
Clay ridge cat 2
Overall height: ~ 36.0 cm
Last revised 02/2010
Download