Exterior Graphic Standards Best Practices Manual
May 2010
General Specifications
General Specifications
Exterior Sign Type Index
Identification
Pending Client Direction E.ID.01 - Building Identification Ground Mounted
Pending Client Direction E.ID.02 - Building Identification Wall Mounted Primary
Pending Client Direction E.ID.03 - Building Identification Wall Mounted Secondary
E.ID.04 - Campus Secondary Entrance Identification
E.ID.05 - Campus Boundary Markers
Pending Client Direction E.ID.06 - Parking Lot Identification Pole Mounted
E.ID.07 - Parking Lot Identification Post and Panel
E.ID.08 - Campus Banners
Directional
E.D.01 - Pedestrian Directional
E.D.02 - Vehicular Directional Ground Mounted
E.D.03 - Vehicular Directional Post and Panel
Orientation
E.O.01 - Campus Map Non Illuminated
Pending Client Direction E.O.02 - Campus Map Illuminated
Regulatory
E.R.01 - No Smoking
E.R.02 - Stop Sign
E.R.03 - Yield Sign
E.R.04 - Pedestrian Crossing
E.R.05 - Speed Limit
E.R.06 - Accessible Route
May 2010
Page 1
Exterior Sign Type Index
General Specifications
Exterior Wayfinding Fonts
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
1
Primary Font: Swiss 721 Condensed BT Bold
Scale: None
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
2
Secondary Font: Swiss 721 Condensed BT Roman
Scale: None
May 2010
Page 2
Exterior Wayfinding Fonts
General Specifications
Text Height and Visibility Guide
Distance and Visibility
Font style, size, material, color contrast and viewing condition contribute the legibility of text. The overall size of the lettering shall
be determined by the distance from which the sign can be safely and easily read. The message should be concise as practical.
Letters shall be adequately spaced and not crowded.
Below is a standard “rule of thumb” guide for legibility under ideal condition.
Viewing Distance
50 ft.
100 ft.
150 ft.
200 ft.
250 ft.
300 ft.
350 ft.
400 ft.
450 ft.
9”
8”
Letter Cap. Height
7”
6”
5”
4”
3”
2”
1”
- Recommended for Optimum Visibility
- Maximum Expected Visibility Under Ideal Conditions
May 2010
Page 3
Text Height and Visibility Guide
General Specifications
Directional Arrow Design and Usage
Directional Arrow Usability
Directional arrows used in this signage system are to be of the design and useage described on this page.
4x
3x
Arrow proportion is a 4:3 ratio
Straight
Ahead
Left
Right
Up and to
the left
May 2010
Up and to
the right
Page 4
Directional Arrow Design and Usage
General Specifications
System Logos
Logo Colors & Color Visibility
Every Alamo Colleges logo mark has the same blue (PMS 285) sky background. Each college has selected its own color to
accompany this blue. selected its own color to accompany this blue. These colors cannot be altered or changed. In print,
ideally, each logo should be reproduced with three inks: PMS 285, black and the specific college’s color.
The PMS number and CMYK and RGB formulas for each college color are provided below.
The formulas for PMS 285 are: C=100, M=50, Y=0, K=0 and R=0, G=114, B=207
PMS 336
PMS 3285
C=100, M=0, Y=60, K=40
C=100, M=0, Y=50, K=10
R=0, G=102, B=82
R=0, G=147, B=131
PMS 368
C=60, M=0, Y=100, K=0
R=102, G=188, B=41
PMS 1797
C=0, M=100, Y=100, K=0
R=201, G=40, B=45
PMS 2602
PMS Reflex Blue
C=50, M=85, Y=0, K=0
C=100, M=80, Y=0, K=0
R=127, G=75, B=152
R=0, G=37, B=150
May 2010
Page 5
System Logos
General Specifications
Sign Substrate Color Palette
Sign Substrate Color Palette
Important: Colors shown are for representation only. Use correct formula for accurate color match.
PMS 285
PMS 336
PMS 3285 - Palo Alto College
PMS 368 - Northeast Lakeview College
PMS 1797 - San Antonio College
PMS 2602 - Northwest Lakeview College
PMS Reflex Blue - St. Philip’s College
Black
May 2010
Page 6
Sign Substrate Color Palette
General Specifications
International Symbols
International Symbols
Symbols shown below should not be reproduced from this page. Digital files of these graphics are available from
TBG Partners, Inc. at 512.327.1011.
Directional Arrow
Parking
Pedestrian Crosswalk
Restrooms
Cafeteria
Telephone
No Guns
No Phones
No Smoking
Do Not Enter
May 2010
Accessible Area
Page 7
Service Area
International Symbols
IDENTIFICATION
E.ID.04
Campus Secondary Entry Identification
2'- 8 "
fabricated cast stone cap detail designed
for drainage with 1" reveal at base
2'- 8"
2'- 0"
1"
masonry to match architecture
text and graphics are masked and
sprayed with Matthews Paint
all graphics, colors and messaging
provided electronically by TBG Partners
512.327.1011
1
E.ID.04
Page 4
14'- 7"
11'- 10"
fabricated .125 aluminum pan
with bracing as required to prevent
“oil canning” attaches to column with
angle frame and set screws for ease
of updating and refurbishing
9'- 6"
footing elevation is to be 6"
above nearest sidewalk or back
of curb and level at top
TBD
1
Elevation
Scale: 1/2" = 1'- 0"
Note: Above drawings are to show design intent. All cabinets are to be constructed of aluminum angle and channel frame to be designed by sign fabricator and approved by owner.
No visible fasteners and all screw heads are to be painted to match face color.
May 2010
Page 1
E.ID.04 Campus Secondary Entry Identification
E.ID.04
Campus Secondary Entry Identification
2'- 8 "
E.ID.04
Page 3
2
fabricated cast stone cap detail designed
for drainage with 1" reveal at base
2"
graphic wraps returns
top and bottom
2
End View
Scale: 1/2" = 1'- 0"
Note: Above drawings are to show design intent. All cabinets are to be constructed of aluminum angle and channel frame to be designed by sign fabricator and approved by owner.
No visible fasteners and all screw heads are to be painted to match face color.
May 2010
Page 2
E.ID.04 Campus Secondary Entry Identification
E.ID.04
Section Detail
CMU core is formed to
the top and cap slides
over
fabricated cast stone cap detail
designed for drainage with 1"
reveal at base
EternaStone - Cordoba Cream
14611 Ormond Court
Houston, TX 77095
Phone: (281) 856-7066
Alamo Colleges logo is cast
into mold
reveal is cast into mold
masonry to match
architecture
2
Section
Scale: 1/8" = 1"
Note: Above drawings are to show design intent. All signage to be engineered by sign fabricator
with shop drawings to be submitted to and approved by owner prior to construction.
May 2010
Page 3
E.ID.04 Campus Secondary Entry Identification
E.ID.04
Section Detail
.125 aluminum face
welded to angle
frame
1 1/2" x 1 1/2 "
aluminum
angle frame
countersunk screws with
heads painted to match
return color set in even
rhythm on all sides
1 1/2" x 1 1/2 " aluminum
angle frame
masonry anchors as
necessary
masonry to match architecture
mortar to match architecture
air gap with masonry ties
as required
#5 rebar with cells filled
CMU block
1
Section
Scale: 1/8" = 1"
Note: Above drawings are to show design intent. All signage to be engineered by sign fabricator
with shop drawings to be submitted to and approved by owner prior to construction.
May 2010
Page 4
E.ID.04 Campus Secondary Entry Identification
E.ID.04
Accent Color Diagram
San Antonio College Scheme
Palo Alto College Scheme
Northwest Vista College Scheme
St. Philip's College Scheme
1
May 2010
Northeast Lakeview College Scheme
Accent Color Diagram
Scale: None
Page 5
E.ID.04 Campus Secondary Entry Identification
E.ID.05
Campus Boundary Marker
2'- 0 "
2'- 0 "
2
Plan View
Scale: 3/4" = 1'- 0"
2'- 0 "
E.ID.05
Page 2
1
fabricated cast stone cap detail
designed for drainage with 1"
reveal at base
2'- 0"
1"
6'- 0"
masonry to match architecture
3'- 11"
footing elevation is to be 6"
above nearest sidewalk or back
of curb and level at top
1
Elevation
Scale: 3/4" = 1'- 0"
Note: Above drawings are to show design intent. All cabinets are to be constructed of aluminum angle and channel frame to be designed by sign fabricator and approved by owner.
No visible fasteners and all screw heads are to be painted to match face color.
May 2010
Page 1
E.ID.05 Campus Boundary Marker
E.ID.05
Section Detail
fabricated cast stone cap detail
designed for drainage with 1"
reveal at base
EternaStone - Cordoba Cream
14611 Ormond Court
Houston, TX 77095
Phone: (281) 856-7066
Alamo Colleges logo is cast
into mold
CMU core is formed to
the top and cap slides
over
reveal is cast into mold
masonry to match
architecture
2
Section
Scale: 1/8" = 1"
Note: Above drawings are to show design intent. All signage to be engineered by sign fabricator
with shop drawings to be submitted to and approved by owner prior to construction.
May 2010
Page 2
E.ID.05 Campus Boundary Marker
E.ID.07
Post and Panel Parking Lot Identification
2'-0"
6"
1'-6"
Lot 2
Student Parking
Permit Only
interchangeable clamp system
(E.D.03 page 2) with tamper
resistant fasteners and channel
painted to match header color
header paints white
panel is .125 aluminum with 1/2" R
corners on leading edge, painted graphics
and engineer grade white reflective vinyl text
see messaging detail (E.ID.07 page 3)
sign body paints Matthews
cool gray 10
channel paints college accent color with
fasteners painted to match
band paints college accent color
8'- 10 3/4"
3" OD diameter capped aluminum
tube paints Matthews cool gray 10
8" diameter 1/2" aluminum
plate welds to tube with 4 holes
for mounting bolts
4 j-bolts with heads painted
to match pole color
3"
1
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
Elevation
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.ID.07 Post and Panel Parking Lot Identification
E.ID.07
Post and Panel Parking Lot Identification
3 1/2"
3 1/16"
1/8"
1/2" 1/4"
1/8"
3" aluminum pipe (3.068 ID)
hole threads for 10-24
thread set screw
socket set screw
1
Top View - Clamp
Scale: 1/2" = 1"
9/16"
1/4"
5 1/8"
tamper resistant
fasteners and nuts
with nylon locking
inserts paints to
match pole color
3 7/8"
channel welds to
pipe and paints to
match pole color
EQ
1/8"
2 5/8"
EQ
9/16"
1/8"
2
May 2010
Elevation - Clamp
Scale: 1/2" = 1"
3
Page 2
Elevation - Double Clamp
Scale: 1/2" = 1"
E.ID.07 Post and Panel Parking Lot Identification
E.ID.07
Post and Panel Parking Lot Identification
2" 1"
1"
4"
1"
Lot 2
2"
6"
2"
Lot 2
Student Parking
Permit Only
2"
1"
2"
1
Student Parking
Permit Only
Graphic Detail
Scale: 1 1/2" = 1'-0"
2
Graphic Detail
Scale: 1 1/2" = 1'-0"
Note: Messages justify on pole side of panel
May 2010
Page 3
E.ID.07 Post and Panel Parking Lot Identification
E.ID.07
Post and Panel Parking Lot Identification
Lot 2
Student Parking
Permit Only
San Antonio College Scheme
Lot 2
Student Parking
Permit Only
Northwest Vista College Scheme
1
May 2010
Lot 2
Student Parking
Permit Only
Palo Alto College Scheme
Lot 2
Student Parking
Permit Only
Northeast Lakeview College Scheme
Lot 2
Student Parking
Permit Only
St. Philip's College Scheme
Accent Color Diagram
Scale: 3/4" = 1'-0"
Page 4
E.ID.07 Post and Panel Parking Lot Identification
E.ID.08
Campus Banners
1'-3"
6'-0"
digitally printed banner is
double sided
double clamped mounting system
to work with light standard
6'-8" minumum
1
Elevation
Scale: 1/2" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.ID.08 Campus Banners
E.ID.08
Campus Banners
1'-3"
1'-3"
1"
3"
6'-0"
3 3/4"
1
May 2010
3"
1 1/2"
3"
3 3/4"
Elevation - Banner
Scale: 1" = 1'-0"
Page 2
E.ID.08 Campus Banners
E.ID.08
Accent Color Diagram
NORTHWEST
VISTA
NORTHEAST
LAKEVIEW
PALO ALTO
COLLEGE
May 2010
SAN ANTONIO
COLLEGE
ST. PHILIP'S
COLLEGE
1
Elevation - Banner
Scale: 1 1/2" = 1'-0"
Page 3
E.ID.08 Campus Banners
DIRECTIONAL
E.D.01
Pedestrian Directional
interchangeable clamp system
(E.D.01 page 2) with tamper
resistant fasteners
2'-3"
5"
5 1/2"
Loftin Student
Center
Gonzalez Hall
Candler Physical
Education Center
Chemistry & Geology
Building
Moody Learning
Center
Chance Academic
Center
bottom panel is 6'-8" AFF minimum
Fletcher Administration
Center
messages and panel
quantity to be determined
painted graphics return top
and bottom
all graphics and messaging
provided electronically by
TBG Partners, Inc
512.327.1011
directional panel is .125 aluminum
with 1/2" R corners on leading edge,
painted graphics and engineer grade
white reflective vinyl text (E.D.01 page 4)
Maximum 5 panels per direction
3" OD diameter capped aluminum
tube paints Matthews cool gray 10
8'- 10 3/4"
6'-8"
8" diameter 1/2" aluminum
plate welds to tube with 4 holes
for mounting bolts
4 j-bolts with heads painted
to match pole color
3"
1
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
Elevation
Scale: 3/4" = 1'-0"
May 2010
Page 1
E.D.01 Pedestrian Directional
E.D.01
Clamp Collar Detail
3 1/2"
3 1/16"
1/8"
1/2" 1/4"
1/8"
3" aluminum pipe (3.068 ID)
hole threads for 10-24
thread set screw
socket set screw
1
Top View - Double Clamp
Scale: 1/2" = 1"
9/16"
1/4"
5 1/8"
3 7/8"
EQ
1/8"
2 5/8"
EQ
9/16"
1/8"
2
May 2010
Elevation - Double Clamp
Scale: 1/2" = 1"
Page 2
E.D.01 Pedestrian Directional
E.D.01
Clamp Collar Detail
tamper resistant fasteners and nuts
with nylon locking inserts paints to
match pole color
channel welds to pipe and paints to
match pole color
1
Elevation - Double Clamp
Scale: 1/2" = 1"
clamps interlock
2
May 2010
Elevation - Double Clamp
Scale: 1/2" = 1"
Page 3
E.D.01 Pedestrian Directional
E.D.01
Blade Detail
2'-3"
5"
3 1/2"
1/2" R
3/8"
3/4"
1"
Note: single line text utilizes top position
1/2"
1 3/16"
1 5/8"
3/4"
2 5/8"
1 5/8"
1 3/16"
1/2"
1
Elevation - Blade
Scale: 1/4" = 1"
paints PMS 285 blue
2
May 2010
all text and graphics are white
engineer grade reflective vinyl
paints campus
accent color
Elevation - Blade
Scale: 1/4" = 1"
Page 4
E.D.01 Pedestrian Directional
E.D.01
Blade Configurations
1
3
May 2010
Plan View - Four Panel
Scale: 3/4" = 1'-0"
Plan View - One Panel
Scale: 3/4" = 1'-0"
Page 5
2
Scale: 3/4" = 1'-0"
4
Scale: 3/4" = 1'-0"
Plan View - Three Panel
Plan View - Two Panel
E.D.01 Pedestrian Directional
E.D.01
Accent Color Diagram
Student Center
Library
San Antonio College Scheme
Student Center
Library
Palo Alto College Scheme
Student Center
Library
Northeast Lakeview College Scheme
Student Center
Library
Northwest Vista College Scheme
Student Center
Library
St. Philip's College Scheme
1
May 2010
Accent Color Diagram
Scale: 1 1/2" = 1'-0"
Page 6
E.D.01 Pedestrian Directional
E.D.02
Ground Mounted Vehicular Directional
2'- 0"
2"
header paints white
6"
system logo paints black and
appropriate accent colors
sign body paints Matthews
cool gray 10
Lot 2
Garage
7'-4"
4'-7"
Visitors Center
painted graphics return top
and bottom as shown
text is engineer grade white
reflective vinyl
see messaging detail on E.D.02
page 3
1" reveal paints matte black
precast cap
1"
2"
masonry to match campus
specific architecture
2'-0"
1
Elevation
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.D.02 Ground Mounted Vehicular Directional
E.D.02
Ground Mounted Vehicular Directional
6"
header paints white
6"
system logo paints appropriate
accent colors
sign end paints appropriate
accent color
painted graphics return top
and bottom as shown
7'-4"
text is engineer grade white
reflective vinyl
4'-7"
see messaging detail on E.D.02
page 3
1" reveal paints matte black
precast cap
1"
2"
masonry to match campus
specific architecture
2'-0"
1
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 2
E.D.02 Ground Mounted Vehicular Directional
E.D.02
Panel Graphic Detail
2"
1"
1"
1"
4"
4"
1"
1"
2"
2"
4"
1"
3 3/4"
2"
Lot 2
2 1/2"
1 1/2"
Garage
2 1/2"
4"
2 3/4"
2"
Visitors Center
2 1/2"
2 1/4"
1
May 2010
Graphic Detail
Scale: 1 1/2" = 1'-0"
1 1/2"
2
Page 3
2 1/4"
Graphic Detail
Scale: 1 1/2" = 1'-0"
E.D.02 Ground Mounted Vehicular Directional
E.D.02
Accent Color Diagram
Lot 2
Lot 2
Lot 2
Garage
Garage
Garage
Visitors Center
San Antonio College Scheme
Lot 2
Garage
Garage
Northwest Vista College Scheme
May 2010
Palo Alto College Scheme
Lot 2
Visitors Center
1
Visitors Center
Visitors Center
Northeast Lakeview College Scheme
Visitors Center
St. Philip's College Scheme
Accent Color Diagram
Scale: 3/4" = 1'-0"
Page 4
E.D.02 Ground Mounted Vehicular Directional
E.D.03
Post and Panel Vehicular Directional
2'-0"
6"
interchangeable clamp system
(E.D.03 page 2) with tamper
resistant fasteners and channel
painted to match header color
header paints white
Lot 2
Garage
3'-6"
Visitors Center
directional panel is .125 aluminum
with 1/2" R corners on leading edge,
painted graphics and engineer grade
white reflective vinyl text
see messaging detail (E.D.03 page 3)
painted graphics return top
and bottom
sign body paints Matthews
cool gray 10
band paints college accent color
channel paints college accent color with
fasteners painted to match
8'- 10 3/4"
3" OD diameter capped aluminum
tube paints Matthews cool gray 10
8" diameter 1/2" aluminum
plate welds to tube with 4 holes
for mounting bolts
4 j-bolts with heads painted
to match pole color
3"
1
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
Elevation
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.D.03 Post and Panel Vehicular Directional
E.D.03
Clamp Collar Detail
3 1/2"
3 1/16"
1/8"
1/2" 1/4"
1/8"
3" aluminum pipe (3.068 ID)
hole threads for 10-24
thread set screw
socket set screw
1
Top View - Clamp
Scale: 1/2" = 1"
9/16"
1/4"
5 1/8"
tamper resistant
fasteners and nuts
with nylon locking
inserts paints to
match pole color
3 7/8"
channel welds to
pipe and paints to
match pole color
EQ
1/8"
2 5/8"
EQ
9/16"
1/8"
2
May 2010
Elevation - Clamp
Scale: 1/2" = 1"
3
Page 2
Elevation - Double Clamp
Scale: 1/2" = 1"
E.D.03 Post and Panel Vehicular Directional
E.D.03
Panel Graphic Detail
2"
1"
4"
1"
2"
3 3/4"
2"
Lot 2
2 1/2"
1 1/2"
Lot 2
Garage
2 1/2"
Garage
4"
2 3/4"
2"
Visitors Center
2 1/2"
1
Graphic Detail
Scale: 1 1/2" = 1'-0"
Visitors Center
2
Graphic Detail
Scale: 1 1/2" = 1'-0"
Note: Messages justify on pole side of panel
May 2010
Page 3
E.D.03 Post and Panel Vehicular Directional
E.D.03
Accent Color Diagram
Lot 2
Lot 2
Lot 2
Garage
Garage
Garage
Visitors Center
San Antonio College Scheme
Lot 2
Garage
Garage
Northwest Vista College Scheme
May 2010
Palo Alto College Scheme
Lot 2
Visitors Center
1
Visitors Center
Visitors Center
Northeast Lakeview College Scheme
Visitors Center
St. Philip's College Scheme
Accent Color Diagram
Scale: 3/4" = 1'-0"
Page 4
E.D.03 Post and Panel Vehicular Directional
ORIENTATION
E.O.01
Campus Map Non Illuminated
5'- 8"
top to have locking mechanism
specified by owner, fabricator
to provide detailed shop drawings
1'-8"
1
Top View
Scale: 3/4" = 1'- 0"
5'- 4"
2 1/2"
4" 1"
fabricated aluminum
frame with .125 cladding
with countersunk screws
with heads painted to
match
2 1/2"
Campus Directory
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
3'- 6"
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
embedded map graphic
(in design) slides in from
top and anchors in base
and side channels
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
Department Listing
2 1/2"
2"
fabricated aluminum frame slotted
receptor for map
masonry to match architecture
painted graphics return top and bottom
2'- 0"
2
all graphics and messaging provided
electronically by TBG Partners, Inc
512.327.1011
Elevation
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent. All cabinets are to be constructed of aluminum angle and channel frame to be designed by sign fabricator and approved by owner.
No visible fasteners and all screw heads are to be painted to match face color.
May 2010
Page 1
E.O.01 Campus Map Non Illuminated
E.O.01
Campus Map Non Illuminated
campus logo colors for
specific location
1'- 0"
5'- 6"
fabricated aluminum
frame with .125 cladding
with countersunk screws
with heads painted to
match
2'- 6"
masonry to match architecture
all graphics and messaging provided
electronically by TBG Partners, Inc
512.327.1011
1
May 2010
End View
Scale: 3/4" = 1'- 0"
Page 2
E.O.01 Campus Map Non Illuminated
REGULATORY
E.R.01
No Smoking
3
Plan View
Scale: 3/4" = 1'-0"
1'-0"
panel is .125 aluminum with 1/2" R
corners on leading edge, painted graphics
and engineer grade white reflective vinyl
text (E.R.01 page 2)
2'-0"
1'-3"
3"
1
Elevation
Scale: 3/4" = 1'-0"
panel is stud mounted to pole with
with no visible fasteners on face
3" capped aluminum square tube
paints Matthews cool gray 10
8" diameter 1/2" aluminum plate welds
to tube with 4 holes for mounting bolts
4 j-bolts with heads painted
to match pole color
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
2
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.R.01 No Smoking
E.R.01
Panel Detail
1'-0"
1 1/2"
9"
11 3/8"
2'-0"
1/4"
1"
1 1/2"
2"
1
May 2010
Elevation - Blade
Scale: 1/4" = 1"
Page 2
E.R.01 No Smoking
E.R.01
Accent Color Diagram
San Antonio
College is a
Smoke Free
Campus
San Antonio College Scheme
Northwest
Vista
College is a
Smoke Free
Campus
Northwest Vista College Scheme
1
May 2010
Palo Alto
College is a
Smoke Free
Campus
Palo Alto College Scheme
Northeast
Lakeview
College is a
Smoke Free
Campus
Northeast Lakeview College Scheme
St. Philip's
College is a
Smoke Free
Campus
St. Philip's College Scheme
Accent Color Diagram
Scale: 1 1/2" = 1'-0"
Page 3
E.R.01 No Smoking
E.R.02
Stop Sign
3
Plan View
Scale: 3/4" = 1'-0"
standard DOT sign stud mounted
to pole with no visible fasteners
on the face
per code requirement
3" capped aluminum square tube
paints Matthews cool gray 10
8" diameter 1/2" aluminum plate welds
to tube with 4 holes for mounting bolts
3"
1
Elevation
Scale: 3/4" = 1'-0"
4 j-bolts with heads painted
to match pole color
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
2
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.R.02 Stop Sign
E.R.03
Yield Sign
3
Plan View
Scale: 3/4" = 1'-0"
standard DOT sign stud mounted
to pole with no visible fasteners
on the face
per code requirement
3" capped aluminum square tube
paints Matthews cool gray 10
8" diameter 1/2" aluminum plate welds
to tube with 4 holes for mounting bolts
3"
1
Elevation
Scale: 3/4" = 1'-0"
4 j-bolts with heads painted
to match pole color
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
2
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.R.03 Yield Sign
E.R.04
Pedestrian Crossing
3
Plan View
Scale: 3/4" = 1'-0"
1'-0"
panel is .125 aluminum with 1/2" R
corners on leading edge, painted graphics
and engineer grade white reflective vinyl
text (E.R.04 page 2)
2'-0"
panel is stud mounted to pole with
with no visible fasteners on face
3" capped aluminum square tube
paints Matthews cool gray 10
per code requirement
8" diameter 1/2" aluminum plate welds
to tube with 4 holes for mounting bolts
3"
1
Elevation
Scale: 3/4" = 1'-0"
4 j-bolts with heads painted
to match pole color
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
2
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.R.04 Pedestrian Crossing
E.R.04
Panel Detail
1'-0"
1 1/2"
9"
11 3/8"
2'-0"
1/4"
1"
2"
2 1/2"
1
May 2010
Elevation - Blade
Scale: 1/4" = 1"
Page 2
E.R.04 Pedestrian Crossing
E.R.04
Accent Color Diagram
San Antonio College Scheme
Palo Alto College Scheme
Northwest Vista College Scheme
St. Philip's College Scheme
1
May 2010
Northeast Lakeview College Scheme
Accent Color Diagram
Scale: 1 1/2" = 1'-0"
Page 3
E.R.04 Pedestrian Crossing
E.R.05
Speed Limit Sign
3
Plan View
Scale: 3/4" = 1'-0"
standard DOT sign stud mounted
to pole with no visible fasteners
on the face
per code requirement
3" capped aluminum square tube
paints Matthews cool gray 10
8" diameter 1/2" aluminum plate welds
to tube with 4 holes for mounting bolts
3"
1
Elevation
Scale: 3/4" = 1'-0"
4 j-bolts with heads painted
to match pole color
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
2
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.R.05 Speed Limit Sign
E.R.06
Accessible Route
3
Plan View
Scale: 3/4" = 1'-0"
1'-0"
panel is .125 aluminum with 1/2" R
corners on leading edge, painted graphics
and engineer grade white reflective vinyl
text (E.R.04 page 2)
2'-0"
panel is stud mounted to pole with
with no visible fasteners on face
3" capped aluminum square tube
paints Matthews cool gray 10
per code requirement
8" diameter 1/2" aluminum plate welds
to tube with 4 holes for mounting bolts
3"
1
Elevation
Scale: 3/4" = 1'-0"
4 j-bolts with heads painted
to match pole color
8" diameter sonotube formed base with
3" above grade to provide mow strip
footing detail per contractor
2
End View
Scale: 3/4" = 1'-0"
Note: Above drawings are to show design intent, shop drawings to be approved prior to fabrication. Fasteners and screw heads are to be painted to match face color.
May 2010
Page 1
E.R.06 Accessible Route
E.R.06
Panel Detail
1'-0"
1 1/2"
9"
11 3/8"
2'-0"
1/4"
1"
2"
2 1/2"
2"
1
May 2010
Elevation - Blade
Scale: 1/4" = 1"
Page 2
E.R.06 Accessible Route
E.R.06
Accent Color Diagram
San Antonio College Scheme
Palo Alto College Scheme
Northwest Vista College Scheme
St. Philip's College Scheme
1
May 2010
Northeast Lakeview College Scheme
Accent Color Diagram
Scale: 1 1/2" = 1'-0"
Page 3
E.R.06 Accessible Route