Digital Electronics Key Terms Quiz 1.1 Name _______________________ 1. Joining two metallic surfaces with heat and molten solder 2. Tool with an internal heating element used to head surfaces being soldered 3. Metallic alloy of tin and lead 4. A solder connection that is characterized by a grayish porous appearance and is usually due to insufficient heat during the soldering process 5. Applying a thin coat of solder to materials prior to soldering 6. 10. '7. '8. '9. Unwanted formation of a conductive path of solder between conductors A. Solder D. Seven Segment Display G. Soldering Iron J. Tinning B. Soldering E. Dual Inline Package H. Small Outline IC C. Solder Bridge F. Cold Soldering I. Plastic Leaded Chip Carrier 11. The resistance 23,000 Ohms can be written in ___________________ as 2.3 X 10 4 _________________ as 23 x 10 3 or in ____________________ as 23 kilo Ohms. 12.____________________ are labeled using a color code and measured in Ohms. 13. ____________________ store an electric charge and use the units Farads 14. ___________________ conduct electricity in one direction only and illuminates 15. ___________________ was derived from "transfer resistor" 16. Put the number 0.00000347 in engineering notation ______________________ Digital Electronics Key Terms Quiz 1.1 Name _______________________ 1. Joining two metallic surfaces with heat and molten solder 2. Tool with an internal heating element used to head surfaces being soldered 3. Metallic alloy of tin and lead 4. A solder connection that is characterized by a grayish porous appearance and is usually due to insufficient heat during the soldering process 5. Applying a thin coat of solder to materials prior to soldering 6. 10. '7. '8. '9. Unwanted formation of a conductive path of solder between conductors A. Solder Bridge D. Cold Soldering G. Plastic Leaded Chip Carrier B. Solder E. Seven Segment Display H. Soldering Iron C. Soldering F. Dual Inline Package I. Small Outline IC J. Tinning 11. The resistance 23,000 Ohms can be written in ___________________ as 2.3 X 10 _________________ as 23 x 103 4 or in ____________________ as 23 kilo Ohms. 12. ___________________ was derived from "transfer resistor" 13. ____________________ store an electric charge and use the units Farads 14. ___________________ conduct electricity in one direction only and illuminates 15.____________________ are labeled using a color code and measured in Ohms. 16. Put the number 0.000675 in scientific notation ______________________ ____________ being soldered appearance and J. Tinning _ as 2.3 X 10 4 s 23 kilo Ohms. ____________ being soldered appearance and Chip Carrier J. Tinning _ as 2.3 X 10 4 s 23 kilo Ohms.